CRFQ SWC2700000005 ATTACHMENT_B WV Minimum Requirements for Design and Equipment of Electric School Buses (1)-1.pdf

PDF 32 KB Posted

Attached to
VARIOUS SCHOOL BUSES FY2026-27 School Year
Solicitation number
CRFQ 0212 SWC2700000005 3
Issued by
Kanawha County, West Virginia

About this file

This is a supplemental specification document issued by the West Virginia Department of Education (WVDE) establishing minimum requirements for the design and equipment of electric school buses for the FY2026-27 school year procurement. The specification applies exclusively to new electric school buses and supersedes conflicting provisions in the primary West Virginia school bus specification (126CSR92). Key technical requirements include an operating range of at least 100 miles, propulsion systems capable of reaching 65 mph when fully loaded, regenerative braking capability, and compliance with all applicable Federal Motor Vehicle Safety Standards (FMVSS) and Society of Automotive Engineers (SAE) standards current at the time of manufacture. The specification mandates that successful bidders provide comprehensive training for first responders, state personnel, supervisors, county school bus mechanics, and bus operators on safe operation, inspection, repair, and maintenance of the vehicles, with training locations and frequency subject to WVDE approval.

The specification establishes stringent safety and design parameters for electric powertrains, requiring that charging connections be located outside the passenger compartment, that battery packs be inaccessible from interior areas, and that high-voltage components include disconnect switches clearly marked and located outside passenger areas. Battery systems must include a minimum eight-year/100,000-mile warranty (excluding V2G applications), while propulsion system warranties must cover a minimum of five years/100,000 miles. Additional requirements include Vehicle-to-Grid (V2G) capability with AC/DC charging using standard SAE J1772 CCS1 connectors, active heating and cooling systems for batteries, pedestrian alert sound generation for speeds under 15 mph, and industry-standard orange coloring for high-voltage wiring with appropriate hazard labeling throughout the vehicle. The document contains no pricing information, funding sources, set-asides, or award timelines.

View the file

Other files

Show all 11

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

126CSR92

ATTACHMENT B

WEST VIRGINIA MINIMUM REQUIREMENTS

FOR DESIGN AND EQUIPMENT OF ELECTRIC SCHOOL BUSES

1. ELECTRIC DRIVE

1.1. The West Virginia Minimum Requirements for Design and Equipment of School Buses is the primary specification for all school buses in West Virginia pursuant to §126CSR92. This document is supplemental to that specification and is applicable to electric buses only, and if a conflict exists between that specification and this section, this section shall supercede all applicable provisions of the primary specification shall be adhered to unless specifically mentioned in this supplement. This specification is for new electric school buses only and does not allow for the modification of any existing school bus.

2. TRAINING FOR LOCAL SCHOOL PERSONNEL

2.1. The successful bidder shall be required to provide training for first responders, state personnel, supervisors, county school bus mechanics and bus operators in the safe and efficient operation, inspection, repair and maintenance of the bus. This training may be provided at multiple locations around the state in response to local demand. Class content, location and frequency shall be approved by the WVDE.

3. COMPLIANCE WITH FMVSS

3.1. All electric systems shall be in full compliance with all applicable Federal Motor Vehicle Safety Standards {FMVSS) and all Society of Automotive Engineers (SAE) standards that are applicable at time of manufacture.

4. CHARGING

4.1. Charging connection point shall be outside the passenger compartment.

4.2. While charging, the transmission/propulsion system shall be rendered inoperative.

4.3. Shall have AC and/or DC charging capabilities with standard SAE J1772 CCS1 connector.

4.4. Shall be V2G (Vehicle to Grid) capable.

4.5. Wireless charging is permissible.

5. ELECTRIC POWER SOURCE (BATTERY)

5.1. Shall not be located in or accessible from the interior of the school bus.

5.2. Shall be designed to prevent the passenger compartment from becoming energized.

5.3. All batteries shall be designed to prevent any dangerous fluids or fumes from entering the passenger area.

5.4. There shall be a disconnect switch or device to shut-off the high voltage components at the power source in the event of a crash.

5.5. Battery packs shall be appropriately heated and cooled.

5.6. High voltage Battery warranty shall be a minimum of 8 years/100,000 miles. Excludes vehicles using Vehicle-to-Grid (V2G) or used to export power.

6. HEATING

6.1. Heaters shall be capable of heating the passenger and driver's compartments.

7. INSTRUMENT DISPLAY

7.1. The instrument display panel must contain:

7.1.a. an indication showing the state of charge (power and /or range).

8. MARKINGS

8.1. The outer layer of insulation or wiring conduit for drive system high-voltage wiring shall be industry standard orange color.

8.2. All high-voltage components shall be labeled with a High Voltage marking/warning.

8.3. An electric vehicle identifying label shall be affixed on the right rear corner of the bus body.

8.4. An additional label shall be applied to the right side of the bus rearward of the entrance door and to the left side of the bus aft of the driver's window.

9. OPERATING RANGE

9.1. Shall be OEM design which is capable of operating with a range of 100 miles or more.

10. POWER DISCONNECT

10.1. A power disconnect device or a switch to disable high voltage shall be provided.

10.2. This disconnect device or switch shall be clearly marked.

10.3. If located inside a compartment, the compartment shall be clearly marked.

10.4. This device or switch shall not be in or accessible from the passenger area.

11. POWER REGENERATION

11.1. Regenerative braking shall be required.

12. PROPULSION SYSTEM /DRIVETRAIN

12.1. Shall be of sufficient power and torque to propel the vehicle fully loaded up to 65 mph.

12.2. Propulsion system warranties shall be a minimum 5 years/100,000 miles.

13. SEATING

13.1. All seats shall be mounted to eliminate contact with batteries and underside of the bus if seat replacement or reconfiguration is necessary.

14. SOUND GENERATION

14.1. All electric school buses shall produce a sound for pedestrian alert while in motion under 15 mph.

File details come from the government source that posted it. Updated .