CPP.pdf
PDF 149 KB Posted
- Attached to
- F-16 Accelerometer
- Solicitation number
- SPRHA4-26-Q-0470
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is a Contract Data Requirements List (DD Form 1423-1) for a single data item related to an Accelerometer Assembly contract with the U.S. Air Force.
The required deliverable is a Counterfeit Prevention Plan (CPP) with data item number A001. The contract is FD2020-26-00470, and the requiring office is 416 SCMS/GUEAA located at Hill Air Force Base, Utah. The contractor must submit the CPP via email to alan.christenson.1@us.af.mil no later than thirty (30) calendar days after contract award. The Government will provide any required comments within fourteen (14) calendar days of receipt, and the contractor must resubmit revisions within seven (7) calendar days if requested. The plan requires a letter of transmittal and must be marked with Distribution Statement "D," limiting distribution to the Department of Defense and U.S. DoD contractors only due to critical technology classification. The document must also include an export control warning as it contains technical data restricted under the Arms Export Control Act and the Export Control Reform Act of 2018. The estimated total price for this data requirement is $0.00, and one copy each (draft and final) must be submitted to 416 SCMS/GUEAA at the specified Hill AFB address.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FATR.pdf | ||
| MQR.pdf | ||
| SPRHA426Q0470.pdf | ||
| EDL.pdf | ||
| EDR.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 1423-1, FEB 2001
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
PREVIOUS EDITION MAY BE USED.
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please DO NOT RETURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No.
listed in Block E.
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP ________ TM _______ OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE
4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
7. DD 250 REQ
8. APP CODE
9. DIST STATEMENT
REQUIRED
10. FREQUENCY
11. AS OF DATE
12. DATE OF FIRST SUBMISSION
13. DATE OF SUBSEQUENT
SUBMISSION
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
Draft Final
Reg Repro
15. TOTAL
16. REMARKS
17. PRICE GROUP
18. ESTIMATED
TOTAL PRICE
G. PREPARED BY H. DATE I. APPROVED BY J. DATE
Page of Pages
A MISC
Accelerometer Assem FD2020-26-00470
A001 Counterfeit Prevention Plan CPP
DI-MISC-81832 CLIN for Data 416 SCMS/GUEAA
LT
A D
ONE/R
SEE BLK 16
SEE BLK 16
AS REQ
416 SCMS/ 1 1
GUEAA
6070 Gum LN Bldg. 1213 Hill AFB, UT 84056-5826
SEE BLK 16
1 1 0
NOTE: Changes to office symbols and/or e-mail addresses when necessary shall be made by letter through the Government CO/ACO without further revision to this CDRL.
1. Block 4: Contractor Format Acceptable.
2. Blocks 7, 8, 14: The contractor shall submit a letter of transmittal and send the Contractors Counterfeit Protection Plan (CPP) via e-mail to:
alan.christenson.1@us.af.mil
3. Blocks 8, 10, 11, 12, 13: The contractor shall deliver the Counterfeit prevention Plan (CPP) NLT thirty (30) calendar days after contract award. If any remediation is required the Government comments will be provided to the contractor within fourteen (14) calendar days after receipt. If requested the contractor shall resubmit the CPP NLT seven (7) calendar days after receipt of Government comments.
4. Block 9: Distribution Statement, Export Control Warning and Destruction Notice shall be IAW DoD Instruction 5230.24
The following Distribution Statement shall be placed on the first sheet of each document and/or associated lists.
DISTRIBUTION STATEMENT "D": Distribution authorized to the Department of Defense and U.S. DoD contractors only (Critical technology). (Feb 2026).
Other requests for this document must be referred to 416 SCMS/GUEAA, Hill
AFB, UT 84056-5826.
EXPORT CONTROL WARNING: All printed and electronic, including digital, technical documents that determined to contain export-controlled technical data shall be marked with the following statement:
WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25 and DoD Instruction 2040.02.
NSP
0.00
26 Feb 2026 26 Feb 2026
1 1
PINNEGAR.STEPH
ANIE.A.1102660737
Digitally signed by
PINNEGAR.STEPHANIE.A.1102660737
Date: 2026.02.26 15:11:37 -07'00'
CHRISTENSON.AL
AN.W.1591287687
Digitally signed by
CHRISTENSON.ALAN.W.1591287687
Date: 2026.03.02 13:00:14 -07'00'
File details come from the government source that posted it. Updated .