COMBO - 366 OSS Auditorium Refresh.pdf

Mountain Home Air Force Base, Idaho

In accordance with FAR PART 12.603(c)(2): This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation, FA489723QC085, is being issued as a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2023-010

Acquisition Information

RFQ Issued By:

366 FAS/PKA

Quotes/Offers are Due:

See SAM Posting

Date Issued:

See SAM Posting

Contract Administrator: 1Lt Konrad Zirkle Phone: (208) 828-6478 E-Mail:

Konrad.zirkle.1@us.af.mil

Contracting Officer: Tammie Morlock Phone: (208) 828-0312

E-Mail:

Tammie.morlock@us.af.mil

NAICS: 238210

SB Size Standard:

$19 Million

Type of Set- Aside:

None Small Business Small Disadvantaged

Business Veteran-Owned Small

Business

Woman Owned Small Business HUBZone Section 8(a) Service-Disabled Veteran-Owned

Small Business

This is a 100% Total Small Business Set-aside.

The government intends to award a Firm Fixed-Price Contract

ATTACHMENT(s):

1. PWS – 366 OSS Auditorium AV Restoration

2. 366 OSS Auditorium Diagram

3. MHAFB Entry Requirements

Quote Submission Information

ADDENDUM TO FAR 52.212-1

ADDENDUM TO FAR 52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS

(NOV 2021)

It is emphasized that this is solicitation is issued in accordance with the procedures of FAR Parts 13 and 13.106-2(b)(3), which are intended to streamline source selection and be minimally burdensome for both the US Government and the quoters interested in competing for this requirement. Any references in the solicitation to offer/offeror shall be deemed to mean quotation/quoter.

Instructions to Offerors-Commercial Items, quotes shall also consist of the following:

1) SUBMISSION INFORMATION: The contractor shall submit a signed copy of this Combined Synopsis/Request for Quote. All solicitation amendments must be acknowledged or signed and returned with the quote.

2) PAST PERFORMANCE: If available, the contractor may submit past performance data on similar contracts as this requirement.

Quote Response Date & Time:

Each quoter must submit all documents to both konrad.zirkle.1@us.af.mil and tammie.morlock@us.af.mil by the closing date stated on page one (1). Clearly identify RFQ# FA489723QC085 in the subject line.

All quoters are responsible for verifying if their quote was received by the contracting office. You may wish to place a read/delivery receipt. Offerors are advised that delays can be experienced with the Government’s e-mail system. Additionally, the e-mail system capacity for each e-mail is 10MB (better if smaller). E-mails greater than 10MB will not be delivered and will not be considered. Therefore, quotes exceeding the size limit must be sent via multiple e-mails.

Note: .zip files are not an acceptable format for the Air Force Network and will not go through our email system.

Questions Response Date & Time:

All questions regarding this RFQ must be emailed to konrad.zirkle.1@us.af.mil by 08:00 A.M. MST on 15 Sep 2023. Other methods of submitting questions are not authorized, and will not be acknowledged or addressed.

mailto:konrad.zirkle.1@us.af.mil mailto:tammie.morlock@us.af.mil mailto:konrad.zirkle.1@us.af.mil

ADDITIONAL IMPORTANT INFORMATION:

1. Site Visit: The auditorium will be available for prospective offerors to visit on Sept 15 at 1000- 1200 MST. Please RSVP by Sept 14 at 1200 MST by sending an email to konrad.zirkle.1@us.af.mil in order to receive more detailed instructions. Ensure that chosen attendee is allowed on Mountain Home AFB – see Attachment 3 – MHAFB Entry Requirements to ensure chosen representative may enter the installation.

2. The Quoter agrees to hold the prices in its quote firm for 60 calendar days from the date specified for receipt of the Quote.

3. System for Award Management (SAM). The Contractor shall be registered in the SAM database prior to the award of this contract. Further information and guidance regarding SAM can be found at the SAM website: www.sam.gov.

4. Each quote should contain the contractor's best terms from a price and technical standpoint. It is the contractor’s responsibility to ensure that there are no discrepancies presented within the information contained in its quote. Potential quoters are hereby notified that in the event there are discrepancies within information in a quote will be rejected.

5. By signing this RFQ, Offeror is agreeing to the Provisions and Clauses as indicated within this solicitation.

FAR Provision 52.212-2, Evaluation -- Commercial Items (Nov 2021), applies to this acquisition and the following evaluation is applicable.

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

- Price

- Past Performance

- Technical Capability

1. Total Evaluated Price (TEP): The Government will evaluate quoted prices by adding the total price of each CLIN. In determining whether a price is fair and reasonable, the government may use historical data, independent Government estimates in its price analysis, or any other technique permissible by FAR 12 and FAR 13. The TEP will be calculated as follows:

a) The sum of the extended prices (unit quantity multiplied by unit price) for CLINs 0001 and 0002 for the base performance period

2. Past Performance: Past performance submitted by the offeror will be evaluated using the rating scheme below. In the case of an offeror who does not submit past performance data with the quote, the past performance will be evaluated by considering data available in the Contractor Performance Assessment Reporting System (CPARS) and Federal Awardee Performance and Integrity Information System (FAPIIS). Only quotes receiving a rating of “Acceptable” will be further evaluated for the award.

http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm#P1130_159445

Rating and Description

Acceptable: Based on the Quoter’s performance record, the Government has a reasonable Expectation that the Quoter will successfully perform the required effort, or the Quoter’s performance record is unknown (see note below).

Unacceptable: Based on the Quoter’s performance record, the Government has no reasonable expectation that the Quoter will be able to successfully perform.

* In the case of a supplier without a record of relevant past performance history in CPARS and FAPIIS for the FSC or PSC of the supplies/services being purchased, the vendor will not be evaluated favorably or unfavorably for its past performance history.

Award will be made to the offeror that represents the best value to the Government, price, and past performance. This may result in the Government awarding to an offeror other than the lowest priced. For example, if an offeror with no past performance history has a lower TEP than an offeror with high past performance ratings in CPARS, the Government may elect to award to the offeror with high past performance ratings if determined to be the best value to the Government.

Note: A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of Provision)

Offeror’s Information

Offeror Name

& Address: POC:

CAGE: Phone:

UEI:

(Unique Entity

Identifier)

Fax:

(Not

Required)

Tax ID: (Not required w/ active SAM registration)

E-Mail

* The offeror is not mandated to use this page of this RFQ; however, if you chose not to use it, all of the information under Offerors information above shall be included in your submitted offer.

The following is the proposed Bid Schedule / Contract Line item(s) (CLIN) which will be used in the contract award:

ITEM

DESCRIPTION

QTY

UNIT

UNIT PRICE

TOTAL PRICE

Equipment, in accordance with PWS

Labor, in accordance with PWS

PERFORMANCE PERIOD:

The contractor shall complete the Auditorium A/V Refresh IAW the PWS within 90 calendar days after date of award.

PAYMENT TERMS & DELIVERY:

The Government shall consider your “DISCOUNT TERMS” to be NET 30 FOB Destination

ADDITIONAL INFORMATION (for Offeror Use):

DOCUMENT NUMBER SOLICITATION NUMBER

FA489723QC085 FA489723QC085

CLAUSES INCORPORATED BY REFERENCE

CLAUSE

NO

ALT NO/

DEV NO

CLAUSE TITLE YEAR-

MO

SECTION

252.203-7000 Requirements Relating to Compensation of Former DoD Officials.

2011-09 SEC I

252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 2022-12 SEC I

252.203-7005 Representation Relating to Compensation of Former DoD Officials.

2022-09 SEC K

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support.

2023-01 SEC I

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation.

2021-05 SEC K

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

2023-01 SEC I

252.204-7024 Notice on the Use of the Supplier Performance Risk System. 2023-03 SEC L 252.223-7008 Prohibition of Hexavalent Chromium. 2023-01 SEC I 252.225-7001 Buy American and Balance of Payments Program. 2023-01 SEC I 252.225-7002 Qualifying Country Sources as Subcontractors. 2022-03 SEC I

252.225-7055 Representation Regarding Business Operations with the Maduro Regime.

2022-05 SEC K

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime.

2023-01 SEC I

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region-Representation.

2023-06 SEC K

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

2023-06 SEC I

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.

2018-12 SEC G

252.232-7010 Levies on Contract Payments. 2006-12 SEC I

252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel.

2023-01 SEC I

252.244-7000 Subcontracts for Commercial Products or Commercial Services.

2023-01 SEC I

252.246-7008 Sources of Electronic Parts. 2023-01 SEC I 252.247-7023 Transportation of Supplies by Sea. 2023-01 SEC F

52.204-13 System for Award Management Maintenance. 2018-10 SEC I 52.204-16 Commercial and Government Entity Code Reporting. 2020-08 SEC L 52.204-18 Commercial and Government Entity Code Maintenance. 2020-08 SEC I 52.204-7 System for Award Management. 2018-10 SEC L

52.212-1 Instructions to Offerors-Commercial Products and Commercial Services.

2023-03 SEC L

52.212-4 Contract Terms and Conditions-Commercial Products and Commercial Services.

2022-12 SEC I

52.223-5 Pollution Prevention and Right-to-Know Information. 2011-05 SEC I

CLAUSE

NO

ALT NO/

DEV NO

CLAUSE TITLE YEAR-

MO

Ombudsman.

Elimination of Use of Class I Ozone Depleting Substances

(ODS)

Health and Safety on Government Installations

CLAUSES IN FULL TEXT

2023-07

2023-07 2023-075352.204-9000

5352.223-9000

5352.223-9001

SEC I

SEC I

SEC I

CLAUSE TEXT

252.211-7003 Item Unique Identification and Valuation. 2023-01

As prescribed in 211.274-6(a)(1), use the following clause:

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) . As used in this clause- Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier;

original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO) /International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" " means the entity (e.g., a manufacturer or vendor) responsible for assigning Enterprise unique item identifiers to items.

" identifier" means a code that is uniquely assigned to an enterprise by an issuing Enterprise agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" or batch number" means an identifying number assigned by the enterprise to a Lot designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again.

The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment.

The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .____

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number .____

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) The Contractor shall ensure that- Data syntax and semantics of unique item identifiers.

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology -

EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary;

and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) . Unique item identifier

(i) The Contractor shall-

(A) Determine whether to-

Serialize within the enterprise identifier; (1)

Serialize within the part, lot, or batch number; or (2)

Use a DoD recognized unique identification equivalent (e.g. Vehicle (3) Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) identifier (if concatenated unique item identifier is used). Enterprise

(5) Original part number (if there is serialization within the original part number).

(6) or batch number (if there is serialization within the lot or batch number). Lot

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) identifier (if concatenated unique item identifier is used).** Enterprise

(6) Original part number (if there is serialization within the original part number).**

(7) or batch number (if there is serialization within the lot or batch number).** Lot

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site /uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) , ____ Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) . If the Contractor acquires by subcontract, any item(s) for which item unique Subcontracts identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

252.232-7006 Wide Area WorkFlow Payment Instructions. 2023-01

As prescribed in 232.7004(b), use the following clause:

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process Electronic invoicing.

vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web- WAWF training.

Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, WAWF methods of document submission.

Electronic Data Interchange, or File Transfer Protocol.

(f) The Contractor shall use the following information when WAWF payment instructions.

submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following Document type.

document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

Invoice 2in1

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table Document routing.

below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC F87700

Issue By DoDAAC FA4897

Admin DoDAAC FA4897

Inspect By DoDAAC ____

Ship To Code ____

Ship From Code ____

Mark For Code ____

Service Approver (DoDAAC) F3F1S1

Service Acceptor (DoDAAC) F3F1S1

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) The Contractor shall ensure a payment request includes documentation Payment request.

appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements Receiving report.

of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

52.204-24 Representation Regarding Certain Telecommunications and

Video Surveillance Services or Equipment.

2021-11

As prescribed in , insert the following provision:4.2105(a)

Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (Nov 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services-Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Products or Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

As used in this provision-(a) Definitions.

Backhaul, covered telecommunications equipment or services, critical technology, interconnection have the meanings arrangements, reasonable inquiry, roaming, and substantial or essential component provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

.(b) Prohibition

Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year (1) 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to-

Prohibit the head of an executive agency from procuring with an entity to provide a service that (i) connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

Cover telecommunications equipment that cannot route or redirect user data traffic or cannot (ii) permit visibility into any user data or packets that such equipment transmits or otherwise handles.

Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year (2) 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to-

Prohibit the head of an executive agency from procuring with an entity to provide a service that (i) connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

Cover telecommunications equipment that cannot route or redirect user data traffic or cannot (ii) permit visibility into any user data or packets that such equipment transmits or otherwise handles.

The Offeror shall review the list of excluded parties in the System for Award (c) Procedures.

Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services".

The Offeror represents that-(d) Representation.

It(1) will, will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation.

The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents (2) that-

It does, does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has (1) responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

For covered equipment-(i)

The entity that produced the covered telecommunications equipment (include entity name, unique (A) entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

A description of all covered telecommunications equipment offered (include brand; model (B) number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

Explanation of the proposed use of covered telecommunications equipment and any factors (C) relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

For covered services-(ii)

If the service is related to item maintenance: A description of all covered telecommunications (A) services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

If not associated with maintenance, the Product Service Code (PSC) of the service being (B) provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has (2) responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

For covered equipment-(i)

The entity that produced the covered telecommunications equipment (include entity name, unique (A) entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

A description of all covered telecommunications equipment offered (include brand; model (B) number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

Explanation of the proposed use of covered telecommunications equipment and any factors (C) relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

For covered services-(ii)

If the service is related to item maintenance: A description of all covered telecommunications (A) services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

If not associated with maintenance, the PSC of the service being provided; and explanation of the (B) proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

52.212-2 Evaluation-Commercial Products and Commercial Services. 2021-11

As prescribed in , the Contracting Officer may insert a provision substantially as follows:12.301(c)

Evaluation-Commercial Products and Commercial Services (Nov 2021)

The Government will award a contract resulting from this solicitation to the responsible offeror (a) whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

[Contracting Officer shall insert the significant evaluation PricePast PerformanceTechnical Capability factors, such as (i) technical capability of the item offered to meet the Government requirement; (ii) price; (iii) past performance (see FAR 15.304); and include them in the relative order of importance of the evaluation factors, such as in descending order of importance.]

Technical and past performance, when combined, are [Contracting Officer state, as important as price in accordance with FAR 15.304, the relative importance of all other evaluation factors, when combined, when compared to price.]

. The Government will evaluate offers for award purposes by adding the total price for all (b) Options options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

A written notice of award or acceptance of an offer, mailed or otherwise furnished to the (c) successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and

Commercial Services.

2023-06

As prescribed in , insert the following clause:12.301(b)(4)

Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services (Jun 2023)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (section 743 of Division E, Title VII, of the Consolidated and Further Continuing (JAN 2017)

Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Section 1634 of Pub. L. 115-91).(NOV 2021)

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section 889(a)(1)(A) of Pub. L. 115-232).(NOV 2021)

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations .(NOV 2015)

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (31 U.(MAR 2023) S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (31 U.S.C. 3553).(AUG 1996)

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Public Laws 108-77 and (OCT 2004) 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ .]Contracting Officer check as appropriate

52.203-6, Restrictions on Subcontractor Sales to the Government with (1) (JUN 2020), Alternate I (41 U.S.C. 4704 and 10 U.S.C. 4655). (NOV 2021)

52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509)).(2) (NOV 2021)

52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (3) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery (JUN 2010) and Reinvestment Act of 2009.)

52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Pub. (4) (JUN 2020) L. 109-282) ( 31 U.S.C. 6101 note).

[Reserved].(5)

52.204-14, Service Contract Reporting Requirements (Pub. L. 111-117, section 743 of (6) (OCT 2016) Div. C).

52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (7) (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

(8) 52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R (JUN 2023) of Pub. L. 117-328).

52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, (9) Suspended, or Proposed for Debarment. (31 U.S.C. 6101 note).(NOV 2021)

52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (10) (OCT 2018) (41 U.S.C. 2313).

[Reserved].(11)

52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award ( ) (15 U.S.C. 657a).(12) OCT 2022

52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns ((13) OCT ) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).2022

[Reserved](14)

(15)

(i) 52.219-6, Notice of Total Small Business Set-Aside (15 U.S.C. 644).(NOV 2020)

Alternate I of 52.219-6.(ii) (MAR 2020)

(16)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (15 U.S.C. 644).(NOV 2020)

Alternate I of 52.219-7.(ii) (MAR 2020)

52.219-8, Utilization of Small Business Concerns ( ) (15 U.S.C. 637(d)(2) and (3)).(17) OCT 2022

(18)

(i) 52.219-9, Small Business Subcontracting Plan ( ) (15 U.S.C. 637(d)(4)).OCT 2022

Alternate I of 52.219-9.(ii) (NOV 2016)

Alternate II of 52.219-9.(iii) (NOV 2016)

Alternate III of 52.219-9.(iv) (JUN 2020)

Alternate IV of 52.219-9.(v) (SEP 2021)

(19)

(i) 52.219-13, Notice of Set-Aside of Orders (15 U.S.C. 644(r)).(MAR 2020)

Alternate I of 52.219-13.(ii) (MAR 2020)

52.219-14, Limitations on Subcontracting ( ) (15 U.S.C. 637s).(20) OCT 2022

52.219-16, Liquidated Damages-Subcontracting Plan (15 U.S.C. 637(d)(4)(F)(i)).(21) (SEP 2021)

52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside ( ) (22) OCT 2022 (15 U.S.C. 657f).

(23)

(i) 52.219-28, Post Award Small Business Program Rerepresentation ( )(15 U.S.C. 632(a)MAR 2023 (2)).

Alternate I of 52.219-28.(ii) (MAR 2020)

52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged (24) Women-Owned Small Business Concerns ( ) (15 U.S.C. 637(m)).OCT 2022

52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business (25) Concerns Eligible Under the Women-Owned Small Business Program ( ) (15 U.S.C. 637(m)).OCT 2022

52.219-32, Orders Issued Directly Under Small Business Reserves (15 U.S.C. 644(r)).(26) (MAR 2020)

52.219-33, Nonmanufacturer Rule (15U.S.C. 637(a)(17)).(27) (SEP 2021)

52.222-3, Convict Labor (E.O.11755).(28) (JUN 2003)

52.222-19, Child Labor-Cooperation with Authorities and Remedies (E.O.13126).(29) (DEC 2022)

52.222-21, Prohibition of Segregated Facilities .(30) (APR 2015)

(31)

(i) 52.222-26, Equal Opportunity (E.O.11246).(SEP 2016)

Alternate I of 52.222-26.(ii) (FEB 1999)

(32)

(i) 52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212).(JUN 2020)

Alternate I of 52.222-35.(ii) (JUL 2014)

(33)

(i) 52.222-36, Equal Opportunity for Workers with Disabilities (29 U.S.C. 793).(JUN 2020)

Alternate I of 52.222-36.(ii) (JUL 2014)

52.222-37, Employment Reports on Veterans ( ) (38 U.S.C. 4212).(34) JUN 2020

52.222-40, Notification of Employee Rights Under the National Labor Relations Act (35) (DEC 2010) (E.O. 13496).

(36)

(i) 52.222-50, Combating Trafficking in Persons (22 U.S.C. chapter 78 and E.O. 13627).(NOV 2021)

Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(ii) (MAR 2015)

52.222-54, Employment Eligibility Verification (Executive Order 12989). (Not (37) (MAY 2022) applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

(38)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

Alternate I of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of (ii) (MAY 2008) commercially available off-the-shelf items.)

52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (39) (Jun 2016) (E.O. 13693).

52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air (40) Conditioners (E.O. 13693).(JUN 2016)

(41)

(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (E.O.s 13423 and (JUN 2014) 13514).

Alternate I of 52.223-13.(ii) (OCT 2015)

(42)

(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (E.O.s 13423 and 13514). (JUN 2014)

Alternate I (Jun2014) of 52.223-14.(ii)

52.223-15, Energy Efficiency in Energy-Consuming Products (42 U.S.C. 8259b).(43) (MAY 2020)

(44)

(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (E.O.s (OCT 2015) 13423 and 13514).

Alternate I of 52.223-16.(ii) (JUN 2014)

52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (E.(45) (JUN 2020) O. 13513).

52.223-20, Aerosols (E.O. 13693).(46) (JUN 2016)

52.223-21, Foams (Jun2016) (E.O. 13693).(47)

(48)

(i) 52.224-3 Privacy Training (5 U.S.C. 552 a).(JAN 2017)

Alternate I of 52.224-3.(ii) (JAN 2017)

(49)

(i) 52.225-1, Buy American-Supplies (41 U.S.C. chapter 83).(OCT 2022)

Alternate I of 52.225-1.(ii) (OCT 2022)

(50)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (19 U.S.C. 3301 (DEC 2022) note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110- 138, 112-41, 112-42, and 112-43.

Alternate I [Reserved].(ii)

Alternate II of 52.225-3.(iii) ( 2022)DEC

Alternate III of 52.225-3.(iv) ( 2021)JAN

Alternate IV (Oct 2022) of 52.225-3.(v)

52.225-5, Trade Agreements (19 U.S.C. 2501, ., 19 U.S.C. 3301 note).(51) (DEC 2022) et seq

52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and (52) (FEB 2021) statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (53) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C.

Subtitle A, Part V, Subpart G Note).

52.226-4,…