Combined Synopsis Solicitation 5000226246.pdf

REQUEST FOR QUOTATION (RFQ)

RFQ Number: 5000226246 Agency: Department of the Treasury, Internal Revenue Service (IRS) Office: Office of the Chief Procurement Officer (OCPO), Taxpayer Focused Division

Solicitation Number: 5000226246 Type: Request for Quotation (RFQ) Date Issued: April 22, 2026 Response Due Date: April 27, 2026, 10:00 AM EST Set-Aside: Unrestrictive Contract Type: Firm-Fixed-Price (FFP)

1. Overview The Internal Revenue Service (IRS) seeks quotations for the procurement of Ricoh ink and ink collection pads for use with Ricoh InfoPrint 5000 printers. This solicitation is issued in accordance with Federal Acquisition Regulation (FAR) Part 12 for commercial products and services.

This RFQ constitutes the official solicitation.

2. Set-Aside Information

• Set-Aside Type: Unrestrictive

• NAICS Code: 423420 – Office Equipment Merchant Wholesalers (except computers and peripherals)

• Size Standard: 200 employees

• PSC Code: 7510 - Office Supplies

3. Contract Type The Government intends to award a Firm-Fixed-Price (FFP) contract.

RFQ# 5000226852 Internal Revenue Service Page 1 of 34

4. Points of Contact Contracting Officer:

Tanya Burnett Email: tanya.r.burnett@irs.gov

Contract Specialist:

Ingrid Harris Email: ingrid.a.harris@irs.gov

5. Vendor Requirements Quoters must provide the following:

• Proof of Ricoh Authorized/Certified Reseller status

• Confirmation that all products are Ricoh OEM (Original Equipment Manufacturer)

• Company UEI (Unique Entity Identifier)

Pricing Information

• Provide unit price and extended price for each CLIN

• Include any discounts or rebates

• Provide link or documentation for published pricing, if available

Terms and Conditions

Provide standard commercial terms including: - Delivery timelines - FOB terms - Manufacturer warranty (duration and coverage) - Extended warranty options (if applicable)

Country of Origin

Indicate whether items are manufactured in the United States. If not, specify the country of origin.

6. Vendor Instructions

• Quotes must remain valid for 60 days

• Vendors must be active in SAM.gov at time of award

• Submit all required provisions

• The Government reserves the right to cancel this solicitation at no cost

RFQ# 5000226852 Internal Revenue Service Page 2 of 34 mailto:tanya.r.burnett@irs.gov mailto:ingrid.a.harris@irs.gov

7. Questions

• Submit questions via email to both Points of Contact

• Deadline for Questions: April 24, 2026, at 10:00 AM EST

• Use Attachment 2 – Q&A Template for submission

8. Submission Instructions

• Due Date: April 28, 2026, at 10:00 AM EST

• Submit quotes via email to the Points of Contact listed above

9. Evaluation Criteria Award will be made using Lowest Price Technically Acceptable (LPTA) procedures.

1. To be considered for award, vendors must:

a. Meet all requirements in this RFQ and the Statement of Work (SOW)

b. Be a responsible contractor

c. Provide Ricoh OEM products

10. Line Items (CLIN Table) Delivery shall be FOB Destination to the locations specified below. Delivery is required within 30 days after receipt of order (ARO) unless otherwise proposed and accepted by the Government.

Shipping Locations:

2. IRS Detroit – Detroit, MI

3. IRS Ogden - Ogden, UT

CLIN Description Qty Location Unit Unit Price Extended Price 0001 12X8201, IP5000 Dye Plus V2 Black (2 bags per case)

600 Detroit Bags $ $

0002 12X8201, IP5000 Dye Plus V2 Black

900 Ogden Bags $ $

RFQ# 5000226852 Internal Revenue Service Page 3 of 34

CLIN Description Qty Location Unit Unit Price Extended Price (2 bags per case)

0003 12X8201, IP5000 Dye Plus V2 Black (2 bags per case)

600 Ogden Bags $ $

0004 12X1675, IP5000 Ink Collection Pads (4 pads per carton)

28 Detroit Pads $ $

0005 12X1675, IP5000 Ink Collection Pads (4 pads per carton)

28 Ogden Pads $ $

0006 12X1675, IP5000 Ink Collection Pads (4 pads per carton)

20 Ogden Pads $ $

Grand Total: $____________________

11. Certification and Signature Failure to sign may result in quote not being evaluated.

• Contractor Name: ________________________________

• UEI: ___________________________________________

• Authorized Official Name & Title: __________________

• Signature: ______________________________________

• Phone Number: __________________________________

• Email: _________________________________________

• Point of Contact (if different): ____________________

The contractor certifies that pricing is valid for 60 days from submission.

RFQ# 5000226852 Internal Revenue Service Page 4 of 34

12. Attachments

• Attachment 1: Statement of Work (SOW)

• Attachment 2: Questions & Answers Template

13. FAR Provisions and Clauses See pages 7-34.

Offerors are responsible for reviewing all applicable clauses.

14. Section L – Instructions to Offerors Offerors shall submit a complete quote that includes:

1. Technical Acceptability o Confirmation of Ricoh Authorized/Certified reseller status o Confirmation that all products are OEM

2. Pricing Volume o Completed CLIN pricing table o Any discounts or rebates

3. Administrative Information o UEI number o SAM.gov confirmation o Completed representations and certifications

15. Section M – Evaluation Factors for Award The Government will evaluate quotes based on the following:

1. Technical Acceptability (Acceptable/ Unacceptable) o Compliance with OEM requirement o Authorized reseller status o Conformance of SOW requirements

2. Price o Total evaluated price o Price reasonableness

RFQ# 5000226852 Internal Revenue Service Page 5 of 34

Award will be made to the lowest-priced quote that is technically acceptable.

End of Solicitation

RFQ# 5000226852 Internal Revenue Service Page 6 of 34

Provisions Incorporated by Reference:

52.204-7 System for Award Management—Registration (Oct 2025)

Full Text Provisions:

52.209-11 Representation by Corporations Regarding Tax Liability or a Felony

The Offeror represents that-

(1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, assessed, for which all judicial and administrative remedies have been exhausted or have lapsed and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and

(2) It is [] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

(End of provision)

52.212-1 Instructions to Offerors—Commercial Products and Commercial Services (Oct 2025)

(a) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. As a minimum, offers shall include—

(1) The solicitation number;

(2) The name, address, telephone number of the Offeror;

(3) The Offeror’s Unique Entity Identifier (UEI) and, if applicable, Electronic Funds Transfer (EFT) indicator;

(4) Information necessary to evaluate the factors contained in the provision at 52.212-2 or as described in the solicitation;

(5) Responses to provisions that require Offeror completion of information, representations, and certifications (other than those collected via the System for Award Management (SAM)); and

(6) A statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation and any solicitation amendments.

RFQ# 5000226852 Internal Revenue Service Page 7 of 34

(b) Period for acceptance of offers. The Offeror agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.

(c) Late submissions, modifications, revisions, and withdrawals of offers.

(1) Offerors are responsible for submitting offers and any modifications or revisions to the Government office designated in the solicitation by the time specified in the solicitation.

(2) Any offer, modification, or revision received after the time specified for receipt of offers is “late” and will not be considered unless it is received before award is made and the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition. However, a late modification of an otherwise successful offer that makes its terms more favorable to the Government will be considered at any time it is received and may be accepted.

(3) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(4) Offerors may withdraw their offers by written notice to the Government received at any time before award.

(d) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with Offerors. Therefore, the Offeror’s initial offer should contain the Offeror’s best terms. However, the Government reserves the right to conduct discussions, if necessary. The Government may reject any or all offers if such action is in the public interest, accept other than the lowest offer, and waive informalities and minor irregularities in offers received.

(e) Debriefings. If a post award debriefing is given to requesting Offerors, the Government will disclose the following information, if applicable:

(1) The agency’s evaluation of the significant weak or deficient factors in the debriefed Offeror’s offer.

(2) The overall evaluated cost or price and technical rating of the successful Offeror and the debriefed Offeror and past performance information on the debriefed Offeror.

(3) The overall ranking of all Offerors when any ranking was developed by the agency during source selection.

RFQ# 5000226852 Internal Revenue Service Page 8 of 34

(4) A summary of the rationale for award.

(5) For acquisitions of commercial products, the make and model of the product to be delivered by the successful Offeror.

(6) Reasonable responses to relevant questions posed by the debriefed Offeror as to whether the agency followed source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities.

(End of Provision)

52.212-2 Evaluation—Commercial Products and Commercial Services (Oct 2025)

(a) Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers:

The Government will award on a Lowest Price Technically Acceptable (LPTA) basis

(b) Options. N/A

(c) Notice of award. A written notice of award or acceptance of an offer furnished to the successful Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of Provision)

52.216-1 Type of Contract (Oct 2025)

The Government contemplates award of a Firm-Fixed Price (FFP) contract resulting from this solicitation.

(End of Provision)

Notification - Organizational Conflicts Of Interest (May 2018)

a. The CO has determined there is a conflict or a potential for an organizational conflict of interest associated with the performance of work for this requirement. Accordingly, RFQ# 5000226852 Internal Revenue Service Page 9 of 34 the attention of prospective offerors is invited to FAR Subpart 9.5, Organizational Conflicts of Interest.

b. The nature of this conflict is (COs shall describe the potential conflict of interest here in sufficient detail to allow a clear understanding by offerors/contractors).

c. The offeror warrants that, to the best of his/her knowledge and belief, there are no relevant facts or circumstances which could give rise to an Organizational Conflict of Interest (OCI), as defined in the Federal Acquisition Regulation (FAR) Subpart 9.5, or that he/she has disclosed all such relevant information. Offerors are advised that misrepresentation of the facts or failure to provide the information requested by the CO may cause the removal of their proposal from further consideration for award.

d. An offeror who believes that the performance of work under the contract may cause an OCI shall provide in its proposal to the Government a plan to mitigate the OCI. The plan will be evaluated to determine whether or not the plan effectively mitigates the potential conflict of interest such that the full scope of work contemplated by this solicitation can be performed by the offeror. The Senior Procurement Executive will then evaluate the mitigation plan and, if the plan is satisfactory, may grant a waiver to the offeror in accordance with FAR 9.503.

e. Restrictions on the performance of work for this requirement and/or work on future contract requirements are set forth in the clause at 1052.905-9001 entitled Organizational Conflicts of Interest. The terms of the Organizational Conflict of Interest clause included in this solicitation are not subject to negotiations.

(End of Provision)

Clauses Incorporated by Reference:

52.203-3 Gratuities (Apr 1984)

52.203-17 Contractor Employee Whistleblower Rights (Nov 2023)

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017)

52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2025)

RFQ# 5000226852 Internal Revenue Service Page 10 of 34

52.204-13 System for Award Management—Maintenance (Oct 2025)

52.204-19 Incorporation by Reference of Representations and Certifications (Dec 2014)

52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (Oct 2025)

52.212-4 Terms and Conditions—Commercial Products and Commercial Services (Oct 2025)

52.219-14 Limitations on Subcontracting (Oct 2025)

52.222-3 Convict Labor (Oct 2025)

52.222-19 Child Labor-Cooperation with Authorities and Remedies (Oct 2025)

52.222-50 Combating Trafficking in Persons (Oct 2025)

52.223-23 Sustainable Products (Oct 2025)

52.229-3 Federal, State, and Local Taxes (Oct 2025)

52.232-23 Assignment of Claims (May 2014)

52.232-39 Unenforceability of Unauthorized Obligations (Jun 2013)

52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Mar 2023)

52.233-3 Protest after Award (Oct 2025)

52.233-4 Applicable Law for Breach of Contract Claim (Oct 2025)

52.243-1 Changes-Fixed Price (Oct 2025)

1052.210-70 Contractor Publicity (Apr 2015)

Full Text Clauses:

52.212-4 Terms and Conditions—Commercial Products and Commercial Services (Oct 2025)

RFQ# 5000226852 Internal Revenue Service Page 11 of 34

(a) Definitions. The clause at Federal Acquisition Regulation (FAR) 52.202-1, Definitions, is incorporated by reference.

(b) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post acceptance rights—

(1) Within a reasonable time after the defect was discovered or should have been discovered; and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(c) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(d) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties.

(e) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal, or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause FAR 52.233-1, Disputes, which is incorporated in this contract by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence. Examples of occurrences include acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, RFQ# 5000226852 Internal Revenue Service Page 12 of 34 epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. When an excusable delay occurs, the Contractor shall—

(1) Notify the Contracting Officer in writing as soon as possible;

(2) Remedy the delay as quickly as possible; and

(3) Notify the Contracting Officer when the occurrence is over.

(g) Invoice. The Government will handle invoices according to the Prompt Payment Act (31 U.S.C. 3903) and 5 CFR part 1315. The Contractor shall submit invoices to the address designated in the contract to receive invoices. An invoice must include the information required by 5 CFR part 1315.9(b).

(h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees, and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark, or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i) Payment—

(1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act ( 31 U.S.C. 3903) and prompt payment regulations at 5 CFR part 1315.

(3) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date that appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(4) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall—

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the—

RFQ# 5000226852 Internal Revenue Service Page 13 of 34

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(C) Affected line item or subline item, if applicable;

(D) Contractor point of contact; and

(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(5) Interest.

(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii) Final decisions. The Contracting Officer will issue a final decision as required by FAR part 33 if–

(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;

(B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see FAR part 32).

(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

RFQ# 5000226852 Internal Revenue Service Page 14 of 34

(v) Amounts shall be due at the earliest of the following dates:

(A) The date fixed under this contract.

(B) The date of the first written demand for payment, including any demand for payment resulting from a termination for cause.

(vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on-

(A) The date on which the designated office receives payment from the Contractor;

(B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or

(C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor.

(vii) The interest charge made under this clause may be reduced under the procedures for interest credits prescribed in FAR part 32 in effect on the date of this contract.

(j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon—

(1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or

(2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination.

(k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties.

(l) Termination for the Government’s convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost

RFQ# 5000226852 Internal Revenue Service Page 15 of 34 principles for this purpose. This paragraph does not give the Government any right to audit the Contractor’s records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided.

(m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. The Government will send a cure notice to the Contractor, unless the reason for the termination is late delivery. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

(n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession.

(o) Warranty. The Contractor warrants and implies that the items delivered under this contract are merchantable and fit for use for the particular purpose described in this contract.

(p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.

(q) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C. chapter 87, Kickbacks; 49 U.S.C. 40118, Government-financed air transportation; and 41 U.S.C. chapter 21 relating to procurement integrity.

(r) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order:

(1) The schedule of supplies/services;

(2) The Disputes, Payments, Invoice, Compliance with Laws Unique to Government Contracts, and Unauthorized Obligations paragraphs of this clause;

RFQ# 5000226852 Internal Revenue Service Page 16 of 34

(3) Other contract clauses incorporated in the solicitation or contract;

(4) Addenda to this solicitation or contract;

(5) Solicitation provisions incorporated in the solicitation;

(6) Other paragraphs of this clause;

(7) Other documents, exhibits, and attachments; and

(8) The specification.

(s) Unauthorized obligations.

(1) Except as stated in paragraph (s)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern:

(i) Any such clause is unenforceable against the Government.

(ii) Neither the Government nor any Government-authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an “I agree” click box or other comparable mechanism (e.g., “click-wrap” or “browse-wrap” agreements), execution does not bind the Government or any Government authorized end user to such clause.

(iii) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement.

(2) Paragraph (s)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures.

(t) Comptroller General examination of record. This paragraph applies if this contract was awarded using other than sealed bid procedures and is in excess of the simplified acquisition threshold on the date of award of this contract.

RFQ# 5000226852 Internal Revenue Service Page 17 of 34

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices, at all reasonable times, the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR part 4, longer period required by statute, or periods specified in other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This clause does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(u) Incorporation by reference. The Contractor’s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.

(End of Clause)

52.219-28 Postaward Small Business Program Representation (Oct 2025)

(a) Definitions. As used in this clause—

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern—

RFQ# 5000226852 Internal Revenue Service Page 18 of 34

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

(b) If the Contractor represented that it was a small business concern, a small disadvantaged business concern, or a joint venture that was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall represent its size and socioeconomic status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts-

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall represent its size status in accordance with the size standard in effect at the time of this representation that corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document/support--table-size-standards.

(d) The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a contract other than a construction or

RFQ# 5000226852 Internal Revenue Service Page 19 of 34 service contract, is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition—

(1) Was set aside for small business and has a value above the simplified acquisition threshold;

(2) Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; or

(3) Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation(s) required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting officer in writing within the timeframes specified in paragraph (b) of this clause, that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following representation and submit it to the contracting office, along with the contract number and the date on which the representation was completed:

(1) The Contractor represents that it □ is, □ is not a small business concern under NAICS Code _____ assigned to contract number _____.

(2) [Complete only if the Contractor represented itself as a small business concern in paragraph (g)(1) of this clause.] The Contractor represents that it □ is, □ is not, a small disadvantaged business concern as defined in 13 CFR 124.1001.

(3) Women-owned small business (WOSB) joint venture eligible under the WOSB Program.

The Contractor represents that it □ is, □ is not a joint venture that complies with the

RFQ# 5000226852 Internal Revenue Service Page 20 of 34 requirements of 13 CFR 127.506(a) through (c). [ The Contractor shall enter the name and unique entity identifier of each party to the joint venture: __.]

(4) Economically disadvantaged women-owned small business (EDWOSB) joint venture.

The Contractor represents that it □ is, □ is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The Contractor shall enter the name and unique entity identifier of each party to the joint venture: __.]

(5) Service-disabled veteran-owned small business (SDVOSB) joint venture eligible under the SDVOSB Program. The Contractor represents that it □ is, □ is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [The Contractor shall enter the name and unique entity identifier of each party to the joint venture: __.]

(6) HUBZone joint venture eligible under the HUBZone Program. [Complete only if the offeror is a HUBZone small business concern. ] The offeror represents, as part of its offer, that It □ is, □ is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [The Contractor shall enter the name and unique entity identifier of each party to the joint venture: _____.] Each HUBZone small business concern participating in the HUBZone joint venture must be certified as a HUBZone concern.

[Contractor to sign and date and insert authorized signer's name and title.______________________ ]

End of Clause)

Organizational Conflicts of Interest (May 2018)

(a) Purpose: The purpose of this clause is (1) to ensure that the contractor is not biased because of conflicting roles in financial, contractual, organizational, or other interests which relate to the work to be performed under this contract, and (2) to ensure the contractor does not obtain any unfair competitive advantage over other parties as a result of its work under this contract.

(b) Scope: The restrictions described herein shall apply to performance or participation by the contractor and any of its affiliates or their successors in interest (hereinafter collectively referred to as the "contractor") in any activities related to this contract.

The term contractor includes the prime contractor, subcontractors, mentors, joint ventures, consultants, or any others acting in a similar capacity.

RFQ# 5000226852 Internal Revenue Service Page 21 of 34

(c) Reporting: The contractor shall immediately report to the CO any conflicts or potential conflicts that arise during the performance of work under this contract, including those that may surface at the subcontract level. Once reported, the CO may terminate the contract for convenience if such an action is in the best interest of the Government. However, should there be any misrepresentation of facts in reporting an OCI or a potential OCI, at the prime or subcontract level, or a complete failure to report such, the CO may impose the remedies provided in subparagraph (f) of this clause.

(d) Restrictions: (The CO shall list appropriate restrictions for the particular acquisition.

Listed below are three sample restrictions.)

(1) The contractor shall not be eligible to participate in Internal Revenue Service contracts, subcontracts, or proposals which stem directly from the contractor's performance of work under this contract, for a period of years after the completion of this contract.

(2) The contractor shall not perform any advisory or assistance services work under this contract for a period of years, unless directed to do so by the CO, if the contractor has been or is substantially involved in the developing or marketing of its products or services or the products or services of another firm.

(3) If, under this contract, the contractor prepares a statement of work or specifications to be used in competitive acquisitions, the contractor shall be ineligible to perform or participate, in any capacity, in any acquisition which is based on said statement of work or specification for a period of years.

(e) Subcontracts: The contractor shall include a clause, substantially similar to this clause, including this subparagraph, in all subcontracts (including purchase/delivery orders), teaming arrangements, and/or other agreements calling for the performance of work related to this contract unless exempted in writing by the CO.

(f) Remedies: For breach of any of the above restrictions or for nondisclosure or misrepresentation of any facts required to be disclosed concerning this contract, including the existence of an actual or potential organizational conflict at the time of or after award, the IRS may terminate the contract for default, disqualify the contractor from subsequent related efforts, and pursue such other administrative remedies as may be permitted by law or other terms and conditions of this contract.

RFQ# 5000226852 Internal Revenue Service Page 22 of 34

1052.224-70 Contract Publication (Oct 2018)

(a) The Department of the Treasury (Treasury) may, at its sole discretion, publish this contract or portions thereof, including orders issued under the contract when deemed in the best interest of the Government.

(b) To afford the Contractor an opportunity to review and propose redactions for any information contained in the Treasury contract that may be subject to a FOIA exemption, the Contractor may submit, within ten business (10) days from the date of award of this contract or any order issued under the contract—

(1) A pdf file of the fully executed contract or order that is suitable for publication and which includes all Contractor proposed redactions (e.g, trade secrets or any commercial or financial information that the Contractor believes to be privileged or confidential business information) and.

(2) A written statement identifying the portions of each proposed redactions, including the applicable exemption under the Freedom of Information Act (FOIA), 5 U.S.C. 552, and, in the case of FOIA Exemption 4, 5 U.S.C. 552(b)(4), shall demonstrate why the information is considered to be a trade secret or commercial or financial information that is privileged or confidential.

(c) Treasury will consider the Contractor’s proposed redactions and associated grounds for nondisclosure prior to making a determination as to what information may be properly withheld for purposes of publishing this contract or portions thereof.

(d) The Contractor may submit a request to the CO for additional time to complete the action prescribed by paragraph (b) of this clause. The lack of action by the Contractor will be deemed by the Government as there being no information in the Treasury contract subject to a FOIA exemption.

(e) Information provided by the Contractor in response to this clause may itself be subject to disclosure under the FOIA.

RFQ# 5000226852 Internal Revenue Service Page 23 of 34

Electronic Invoicing and Payment Requirements for the Invoice Processing Platform (IPP) (Jul 2019)

(a) Definitions:

"Short payment" as used in this clause means the partial payment of an invoice for goods/services actually rendered at the time of payment when the invoice includes additional goods/services that have not yet been provided/rendered.

"Short payment" example: The contract requires the delivery of a set number of items, with the price, delivery location, and delivery due date also specified. The vendor delivers 50% of the items as specified but invoices for 100% of the items. Before implementation of the IPP, the IRS would have paid the vendor for the items delivered and instructed the vendor to re-invoice the IRS when the balances of the items were delivered. In other words, the IRS would "short pay" the invoice since the IRS did not remit payment for the full invoice amount. With implementation of the IPP, the IRS can no longer do this because the IRS cannot accept an electronic invoice that includes items not yet received. The IRS will reject the invoice. The vendor needs to submit an invoice for only the items received by the IRS (in this case, 50%), and, if these items meet all other contract terms and conditions, the IRS will pay the invoiced amount. The vendor submits subsequent invoice(s) for items as they are delivered and accepted.

(b) The Invoice Processing Platform (IPP) is a secure Web-based electronic invoicing and payment information service available to all Federal agencies and their suppliers.

Effective October 1, 2012, invoicing for payment through the IPP will be mandatory for all new contract awards. Additional information regarding the IPP may be found at the IPP website address https://www.ipp.gov. Contractors must complete the contractor point of contact information below and submit it with their proposal submissions.

Contractors may contact the IPP Helpdesk for assistance via e-mail at ippgroup@stls.frb.org or via phone at (866) 973-3131. Once a contract award has been made, the contractor will be contacted by the IPP via e-mail to set up an account. It will be necessary for contractors to login to their IPP accounts every 90 days to keep their IPP accounts active.

(c) Contractor Point of Contact Information

Contractor Name: ______________________________________________________ Contractor IPP Point of Contact Name:

Contractor Phone Number: ______________________________________________________ Contractor E-mail Address: ______________________________________________________

RFQ# 5000226852 Internal Revenue Service Page 24 of 34

(d) Electronic Invoicing and Payment Requirements

Vendor invoices submitted electronically through the IPP should be in the proper format and contain the information required for payment processing. To be approved for payment, a "proper invoice" must list the items specified in FAR 52.232-25 (a)(3)(i) through (a)(3)(x), or in the case of a Commercial Item Contract, the items included in 52.212-4(g)(1)(i) through (g)(1)(x).

If the vendor is offering a discount via the IPP, the discount must be reflected on the invoice. The vendor will select 'Create Invoice'. The IPP system will default to 'Net 30 Prompt Pay' under the Payment Terms dropdown box. The vendor will select from 54 different discount options for the invoice that is being created. If the vendor chooses to offer a discount on the invoice screen, the information will interface to the payment system for processing. Discounts that are offered on attachments rather than the invoice itself cannot be accepted.

Under this contract, the following documents are required to be submitted as an attachment to the invoice (Contracting Officer fills in additional documentation that must be furnished by the contractor (e.g. timesheet)). Please do not submit into IPP any documentation/attachments that conflict with what is stated on the invoice:

Payment and Invoice Questions

For payment and invoice questions, contact the Ancillary Systems at (304) 254-3372 or via e-mail at cfo.fm.ipp.customer.support@irs.gov.

(e) Waiver

If the Contractor is unable to use the IPP for submitting payment requests starting on October 1, 2012, then a waiver form must be completed and submitted with the contractor's proposal submission for review and approval by the Contracting Officer based on one of the conditions listed in the waiver. The vendor will be notified prior to award as to whether their request for waiver has been approved or denied. If the waiver is granted, then a copy of the waiver must be submitted with each paper invoice that the vendor submits to the payment office or the invoice will be returned.

(f) Short Payment

RFQ# 5000226852 Internal Revenue Service Page 25 of 34

Short payment on vendor submitted invoices will no longer be processed or paid. If any portion of the invoice does not meet the requirements for a proper invoice, the entire invoice shall be rejected and returned to the vendor unpaid.

IRS Invoice Processing Platform (IPP) Waiver Form

The IRS invoicing and payment requirements clause (IR1052.232-9000) requires that all invoices under awards made (or effective) on or after October 1, 2012, be submitted electronically via the IPP unless a waiver is requested and granted. If the Contractor is unable to submit its invoice through the IPP, the Contractor shall complete this waiver form indicating the reason for the waiver request by selecting the appropriate box below and providing a narrative summarizing in detail the circumstances requiring a waiver. For a solicitation, submit the waiver form with the proposal submission. For a modification that incorporates the IPP clause into an existing contract, submit the waiver form with the modification. The CO will notify the vendor via e-mail or another appropriate means of communication prior to award as to whether their waiver has been approved or denied. If the waiver is granted, then a copy of the approved waiver must be submitted with each invoice that the vendor submits to the payment office or the invoice will be returned.

Reason for requesting a waiver of the requirement to submit an electronic invoice via the IPP:

[] 1. Submission of invoices through IPP would impose a hardship on an individual (includes employees and sole proprietors) due to: either a physical or mental disability; a geographic, language, or literacy barrier; or an undue financial burden. The requirement to submit invoices through the IPP is automatically waived for all individuals who do not have payment capability using ACH with a U.S. financial institution.

[] 2. The political, financial or communications infrastructure where the place of business is located does not support access to the IPP for submitting invoices electronically.

[] 3. The contractor is located within an area designated by the President of the United States or an authorized agency administration as a disaster area. (Please identify area/location.)

[] 4. The submission of invoices electronically may pose a threat to national security, the life or physical safety of an individual may be endangered, or a law enforcement action may be compromised.

[] 5. The agency does not expect to receive more than one invoice from the same contractor within a one-year period. i.e., the invoice submission is non-recurring.

[] 6. The contractor customarily submits a high volume of invoices on a regular basis via file format, not currently supported by the IPP (i.e., uses a file format other than XML or CSV) and the high volume of invoices would cause a significant burden to the contractor

RFQ# 5000226852 Internal Revenue Service Page 26 of 34 if submitted through the IPP individually. If utilizing this exception, please identify the file formats supported by your invoicing system so that the IPP may consider implementing the requested file format at a…