Combined Synopsis Solicitation 1333ND26QNB680277.docx

Tunable low-noise shorth wavelength visible coherent light source system 1333ND26QNB680277

(I) This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in Revolutionary FAR Overhaul (RFO) Part 12 - Acquisition of Commercial Products and Commercial Services as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.

(II) The solicitation number is 1333ND26QNB680277 and this solicitation is a Request for Quotation (RFQ). This acquisition is being solicited as a small business set-aside.

(III) The solicitation document and incorporated provisions and clauses are those in effect through the RFO.

(IV) The associated North American Industrial Classification System (NAICS) code for this procurement is 334516 - Analytical Laboratory Instrument Manufacturing of 1,000 employees.

(V) All offerors shall provide a firm-fixed-price quotation for the following line item(s):

TOTAL:

(VI) The requirements for the line items to be acquired above are in the attached Statement of Work document.

Attachment 1- STATEMENT OF WORK- Tunable low-noise shorth wavelength visible coherent light source system Attachment 2- Applicable Provisions and Clauses

(VII) Date(s) and place(s) of delivery and acceptance and FOB point are required in accordance with the attached Statement of Work document.

(VIII) The provision at RFO 52.212-1, Instructions to Offerors—Commercial Products and Commercial Services, applies to this acquisition. Addenda to this provision is as follows:

Quoters/Contractors must possess an ACTIVE registration in the System for Award Management, www.SAM.gov, when submitting a quotation and shall continue to hold an active registration until time of award, during performance, and through final payment of any purchase order or contract resulting from this solicitation. This acquisition office will verify that quoters have an active registration through www.sam.gov upon receipt of the quotation. If the SAM.gov registration is not active, the quotation will not be considered for award.

DUE DATE FOR QUOTATIONS

Offerors shall submit their electronic quotations, via email, so that NIST receives them not later than 5:00pm Eastern Time, June 24, 2026. E-mail quotations shall be submitted directly to the Contract Specialist at cielo.ibarra@nist.gov and Contracting Officer at donald.collie@nist.gov

Please reference the RFQ number in the subject line of email communications. Offerors quotations shall not be deemed received by the Government until the quotation is entered in the e-mail inbox set forth above.

PRE-QUOTE INQUIRIES (CAR 1352.215-72):

Offerors must submit all questions concerning this solicitation in writing to both the Contract Specialist, cielo.ibarra@nist.gov and the Contracting Officer, donald.collie@nist.gov . Questions should be received no later than 2 calendar days after the issuance date of this solicitation. All responses to the questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the responses included in the amendment to the solicitation will govern performance of the contract.

QUOTATION PREPARATION INSTRUCTIONS:

Note: Quoters/Contractors must possess an ACTIVE registration in the System for Award Management system, www.SAM.gov, when submitting a quotation and shall continue to be registered until time of award, during performance, and through final payment of any contract resulting from this solicitation. The Contracting Officer shall confirm that quoters have an “active” registration at the www.sam.gov website upon receipt of the quotation. If the SAM.gov registration is not active, the quotation will not be considered for award.

All quotations shall conform to solicitation provisions/clauses and be prepared in accordance with this section. The quotation shall be clearly and concisely written as well as be neat, indexed (cross-indexed as appropriate) and logically assembled. Note: The term “indexed” refers to a table of contents that lists sections and page numbers. In the event that the Offeror is unable to create an indexed quotation, an alternative approach such as a Table of Contents shall suffice. All pages of the quotation shall be appropriately numbered. A cover letter may be included in addition to Volumes I-III discussed below.

In preparing the quotation, each volume shall stand on its own. For each given evaluation factor, the Government will only evaluate the information provided in the corresponding section of the quotation. The Offeror’s quotation shall be clearly divided into the following distinct volumes:

Volume I – Technical Quotation Volume II – Price Quotation Volume III- Terms and Conditions

Volume I - Technical Quotation:

The offeror shall submit one (1) copy of their technical quotation, electronically, via E-mail to the Contract Specialist and Contracting Officer identified above. The technical quotation shall address the following:

Technical Capability:

The quoter shall submit technical approach and capability documentation which may include a narrative, charts, graphs, tables, drawings, product / service literature, and as applicable, demonstrated authority to provide the necessary items and perform the required services identified in the statement of work (Attachment 1). The documentation shall clearly describe, in sufficient detail, the vendor's authority, proposed items, resources and methods to successfully fulfill the requirements including specifications, performance capability requirements, delivery schedules, warranties, and all service requirements. The submission shall clearly identify each line item above. The submission must demonstrate that the proposed system meets or exceeds each minimum requirement described within the attached statement of work document by providing a citation between the statement of work paragraph and the relevant section of the technical description or product literature. The offeror must not simply state they will meet or exceed the requirement; evidence must be provided. If applicable, evidence that the offeror is authorized by the manufacturer to provide the item(s) in the quotation shall be included.

Volume II - Price Quotation:

The offeror shall submit one (1) copy of their entire quotation, electronically, via E-mail to the Contract Specialist and Contracting Officer identified above. The pricing quotation shall be separate from any other portion of the quotation. The offeror shall propose a firm-fixed-price quotation for each CLIN to include all shipping costs (FOB Destination) and tariffs, if applicable. Price quotations shall remain valid for a period of 90 days from the date quotations are due.

Offerors/quoters that are proposing products manufactured outside of the United States must identify any other or unknown charges that may be applicable to the sale of these products as a separate line item on price quotes/proposals. This price element may be listed as part of the cost of the product or as a sub-total element but must be clearly identified. This price element must only apply to the total value of the goods identified for customs processing. Only include the country of origin and the tariff percentage currently in place or the expected amount at time of delivery for that country. Price quotes shall clearly identify the relevant tariffs in terms of percentage and total cost. If there are multiple countries of origins and associated tariffs, identify each separately.

Volume III – Terms and Conditions:

The offeror shall review the provision and clauses attachment and complete any required information as record via a separate volume response to this solicitation.

Acceptance of Terms and Conditions (Addendum to RFO 52.212-1(b) (11)):

If the offeror objects to any of the terms and conditions contained in this solicitation, the offeror shall state "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" [Offeror shall list exception(s) and rationale for the exception(s)]. It is the sole responsibility of the offeror to identify in their quotation any exceptions to the terms and conditions of the solicitation. If the offeror does not include such a statement, the submission of a quotation in response to this solicitation will be regarded as the Offeror's acceptance of the Government's terms and conditions for inclusion into the resultant purchase order (PO).

Notes: System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in this solicitation. Contracting officers will rely on representations from offers based on provisions in the solicitation. Entities are not required to, nor are they able to, update their entity registration to remove these representations in SAM.

This procurement is not being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If an Offeror submits a quotation based upon an FSS or GWAC contract, the Government will accept the proposed price. However, the terms and conditions stated herein will be included in any resultant purchase order, not the terms and conditions of the Offeror's FSS or GWAC contract, and the statement required above shall be included in the quotation.

(XI) Provision 52.212-2, Evaluation-Commercial Products and Commercial Services applies to this procurement. The evaluation criteria included in paragraph (a) of the provision are as follows:

EVALUATION CRITERIA

The Government intends to award a single firm fixed price purchase order (PO) from this solicitation utilizing simplified acquisitions procedures in accordance with RFO part 12. The Government reserves the right not to award a PO and to make an award without discussions based solely upon initial quotes.

Basis for Award:

Award will be made to the responsible offeror whose quotation represents the best value to the Government, considering technical capability and price. The Government may select an offeror with a higher evaluated price if the higher price is justified by superior performance characteristics, including lower optical loss.

An Offeror's failure to address any factor may be considered indicative of the Offeror's lack of understanding of the Government's requirements and may result in the offer being determined unacceptable.

Evaluation Factors:

Technical Capability: No prototypes, demonstration models, used or refurbished instruments will be considered. Evaluation of technical capability shall be based on the information provided in the quotation. NIST will evaluate whether the offeror has demonstrated that its proposed equipment meets or exceeds all minimum requirements. Quotations that do not demonstrate the proposed equipment meets all requirements will not be considered further for award. If an offerors technical description and/or product literature does not indicate whether its proposed equipment meets a certain minimum requirement, NIST will determine that it does not meet the requirements.

Price: The proposed price will be evaluated. The evaluation will determine whether the proposed prices are reasonable in relation to the solicitation requirements. Prices must be entirely compatible with the technical portion of the quotation.

(End of provision 52.212-2)