Combined Synopsis Solicitation 1333ND26QNB030077_20260429.docx

COMBINED SYNOPSIS SOLICITATION

1333ND26QNB030077 HV POSITIONING STAGE

(I) This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in Revolutionary FAR Overhaul (RFO) Part 12 - Acquisition of Commercial Products and Commercial Services as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.

(II) The solicitation number is 1333ND26QNB030077 and this solicitation is a Request for Quotation (RFQ). This acquisition is being competed as a total small business set aside.

(III) The solicitation document and incorporated provisions and clauses are those in effect through the RFO, supplemented by Department of Commerce Acquisition Policy.

(IV) The associated North American Industrial Classification System (NAICS) code for this procurement is 334516 - Analytical Laboratory Instrument Manufacturing with a small business size standard of 1,000 employees.

(V) All offerors shall provide a firm-fixed-price quotation for the following line item(s):

CLIN 0004 - Engineering services prior to manufacturing

TOTAL:

(VI) The requirements for the line items to be acquired above are in the attached Statement of Work document.

Attachment 1- STATEMENT OF WORK- CHIPS R&D (FY26): Large aperture high-vacuum compatible rotary stage Attachment 2- Applicable Provisions and Clauses

(VII) Date(s) and place(s) of delivery and acceptance and FOB point are required in accordance with the attached Statement of Work document.

(VIII) Quoters/Contractors must possess an ACTIVE registration in the System for Award Management, www.SAM.gov, when submitting a quotation and shall continue to hold an active registration until time of award, during performance, and through final payment of any purchase order or contract resulting from this solicitation. This acquisition office will verify that quoters have an active registration through www.sam.gov upon receipt of the quotation. If the SAM.gov registration is not active, the quotation will not be considered for award.

(IX) The provision at FAR 52.212-1, Instructions to Offerors—Commercial Products and Commercial Services (DEVIATION Jan 2026), applies to this acquisition. See Addendum to FAR 52.212-1 below.

Addendum to FAR 52.212-1, Instructions to Offerors – Commercial Products and Commercial Services (DEVIATION Jan 2026):

DUE DATE FOR QUOTATIONS

Offerors shall submit their electronic quotations, via email, so that NIST receives them not later than 12:00pm Eastern Time, June 5, 2026. E-mail quotations shall be submitted directly to the Contract Specialist at elizabeth.timberlake@nist.gov and Contracting Officer at Donald.Collie@nist.gov

Please reference the RFQ number in the subject line of email communications. Offerors quotations shall not be deemed received by the Government until the quotation is entered in the e-mail inbox set forth above.

PRE QUOTE INQUIRIES (CAR 1352.215-72):

Offerors must submit all questions concerning this solicitation in writing to both the Contract Specialist, elizabeth.timberlake@nist.gov and the Contracting Officer, donald.collie@nist.gov . Questions should be received no later than 4 business days after the issuance date of this solicitation. All responses to the questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the responses included in the amendment to the solicitation will govern performance of the contract.

FAR 52.212-1, QUOTATION PREPARATION INSTRUCTIONS:

All quotations shall conform to solicitation provisions/clauses and be prepared in accordance with this section. The quotation shall be clearly and concisely written as well as be neat, indexed (cross-indexed as appropriate) and logically assembled. Note: The term “indexed” refers to a table of contents that lists sections and page numbers. In the event that the Offeror is unable to create an indexed quotation, an alternative approach such as a Table of Contents shall suffice. All pages of the quotation shall be appropriately numbered.

In preparing the quotation, each volume shall stand on its own. For each given evaluation factor the Government will only evaluate the information provided in the corresponding section of the quotation. The Offeror’s quotation shall be clearly divided into the following distinct volumes:

Volume I – Technical Quotation Volume II – Past Performance Volume III – Price Quotation Volume IV – Terms and Conditions

Volume I - Technical Quotation:

The Quoter shall submit one (1) copy of their technical quotation, electronically, via E-mail to the Contract Specialist and Contracting Officer identified above. The technical quotation shall address the following:

Technical Capability:

The quoter shall submit technical approach and capability documentation which may include a narrative, charts, graphs, tables, drawings, product / service literature, and as applicable, demonstrated authority to provide the necessary items and perform the required services identified in the statement of work (Attachment 1). The documentation shall clearly describe, in sufficient detail, the vendor's authority, proposed items, resources and methods to successfully fulfill the requirements including specifications, performance capability requirements, delivery schedules, warranties, and all service requirements. The submission shall clearly identify each line item above. The submission must demonstrate that the proposed system meets or exceeds each minimum requirement described within the attached statement of work document by providing a citation between the statement of work paragraph and the relevant section of the technical description or product literature. The offeror must not simply state they will meet or exceed the requirement; evidence must be provided. If applicable, evidence that the offeror is authorized by the manufacturer to provide the item(s) in the quotation shall be included.

A higher consideration will be given to vendors who provide the following within CLIN 0005 or 6:

1. Documentation of the vacuum procedures and commercial greases for NIST approval prior to manufacture.

2. CLIN 0005 – Option: Base vacuum pressure below 10^(-8) Torr

3. CLIN 0006 – Option: Base vacuum pressure below 10^(-9) Torr

Volume II – Past Performance:

The quoter shall submit up to 3 examples of relevant past performance performed within the last 3 years. Examples should be of work similar in scope, size and complexity to this requirement. The description of each reference described in this section shall not exceed one single-sided page. For each of the contracts, the quoter shall provide the following information:

· Contract number

· Client’s name and address

· Total contract value

· Period of performance

· Identification of role played by quoter (i.e., Prime Contractor, Subcontractor, etc.)

· Narrative describing the requirement and its relevance to the current requirement

· Name of contracting officer or point of contact, telephone number and e-mail address

The quoter is encouraged to focus on prior projects encompassing the same RFQ requirements and describe how these requirements were specifically supported by the quoter. The quoter may use prior experiences in which they served as a prime contractor or subcontractor; however, past performance as a prime contractor may instill higher confidence.

Volume III - Price Quotation:

The offeror shall submit one (1) copy of their entire quotation, electronically, via E-mail to the Contract Specialist and Contracting Officer identified above. The pricing quotation shall be separate from any other portion of the quotation. The offeror shall propose a firm-fixed-price for each CLIN identified above, unless otherwise noted as a Not to Exceed amount. Price quotations shall remain valid for a period of 90 days from the date quotations are due.

The price quotation shall address, at minimum, the following information.

a) The solicitation number

b) The name, phone number, and email address of the quoter's/contractor’s point of contact;

c) Unique Entity Identifier # for quoter's/contractor’s active SAM.Gov registration.

d) A firm fixed price for each required line item, including a unit price and total amount where applicable, and the aggregate quoted firm fixed price for the requirement. Where the Government has identified a line item as requiring a Not to Exceed price, quoters shall comply with this.

e) Shipping and Delivery costs must be included in the quotation either as a separate line item or contained in the total price of the quote. The quotation shall include a total firm fixed price for the requirement that includes all shipping/delivery costs

f) Any applicable discount terms.

Offerors that are proposing products manufactured outside of the United States must identify any other or unknown charges that may be applicable to the sale of these products (here indicated as CLIN 000-5 - Other related transportation expenses) as a separate line item on price quotes/proposals. This price element may be listed as part of the cost of the product or as a sub-total element but must be clearly identified. This price element must only apply to the total value of the goods identified for customs processing. Only include the country of origin and the tariff percentage currently in place or the expected amount at time of delivery for that country. Price quotes shall clearly identify the relevant tariffs in terms of percentage and total cost. If there are multiple countries of origins and associated tariffs, identify each separately.

Volume III – Terms and Conditions:

The offeror shall review the provision and clauses attachment and complete any required information as record via a separate volume response to this solicitation.

Note: System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in this solicitation. Contracting officers will rely on representations from offers based on provisions in the solicitation. Entities are not required to, nor are they able to, update their entity registration to remove these representations in SAM.

Acceptance of Terms and Conditions:

If the offeror objects to any of the terms and conditions contained in this solicitation, the offeror shall state "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" If the offeror does not accept the terms and conditions, the offeror shall list exception(s) and rationale for the exception(s). It is the sole responsibility of the offeror to identify in their quotation any exceptions to the terms and conditions of the solicitation. If the offeror does not include such a statement, the submission of a quotation in response to this solicitation will be regarded as the Offeror's acceptance of the Government's terms and conditions for inclusion into the resultant purchase order (PO).

This procurement is not being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If an Offeror submits a quotation based upon an FSS or GWAC contract, the Government will accept the proposed price. However, the terms and conditions stated herein will be included in any resultant purchase order, not the terms and conditions of the Offeror's FSS or GWAC contract, and the statement required above shall be included in the quotation.

(X) Addendum to 52.212-2, Evaluation-Commercial Products and Commercial Services (DEVIATION Jan 2026) applies to this procurement.

EVALUATION CRITERIA

The Government intends to award a single purchase order (PO) from this solicitation utilizing RFO Part 12. Offerors are strongly encouraged to submit their best technical solutions and price in response to this RFQ. The Government intends to make an award, based on best value, to the offeror with the proposed solution that is most advantageous, price and non-price factors considered. When combined, non-price factors are more important than price. As the non-price factors become more equal among offerors, price shall become more of a determining factor. The Government reserves the right not to award a PO and to make an award based solely upon initial quotes.

Evaluation Factors:

Factor 1: Technical Capability:

This procurement is for commercial items. Therefore, prototypes or demonstration models will not be accepted. Additionally, used or refurbished instruments will not be considered. Evaluation of technical capability shall be limited to the information provided in the quotation.

Technical Capability: No prototypes, demonstration models, used or refurbished instruments will be considered. Evaluation of technical capability shall be based on the information provided in the quotation. NIST will evaluate the extent to which the quoter has demonstrated that its proposed equipment meets or exceeds all minimum requirements. Quotations that do not demonstrate the proposed equipment meets all requirements will not be considered further for award. If a quoter’s technical description and/or product literature does not indicate whether its proposed equipment meets a certain minimum requirement, NIST will determine that it does not meet the requirements.

· For evaluation purposes, special consideration will be given to a vendor who can provide documentation of the vacuum procedures, materials, and commercial greases that will be used.

· CLIN 0005 – Option: Base vacuum pressure below 10^(-8) Torr

· CLIN 0006 – Option: Base vacuum pressure below 10^(-9) Torr

Factor 2: Past Performance:

In assessing the offeror's past performance information, NIST will evaluate, as appropriate, (b) successful performance of contract requirements, quality and timeliness of delivery of goods and services, (c) communications between contracting parties, (d) proactive management and customer satisfaction.

Evaluation of this factor will be based on information contained in the technical portion of the proposal, CPARS, and information provided by references. The Government will evaluate past performance information by contacting appropriate references, including NIST references, if applicable. The Government may also consider other available information in evaluating the Offeror’s past performance. The Government will assign a neutral rating if the offeror has no relevant past performance information.

Price: The proposed price will be evaluated. The evaluation will determine whether the proposed prices are reasonable in relation to the requirements of the solicitation. Prices must be entirely compatible with the technical portion of the quotation.