Combined Synopsis and Solicitation - HT940626QE082.pdf

Combined Synopsis/Solicitation

Synopsis/Solicitation Requirement HT940626QE082 is issued as a Request for Quotation (RFQ). This solicitation for commercial products or commercial services is prepared and solicited in accordance with the Federal Acquisition Regulation (FAR) Overhaul Subpart 12.201-1 supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a separate written solicitation will not be issued.

The Defense Health Agency Contracting Activity (DHACA), Southeastern Healthcare Operations Contracting Division intends to procure a firm-fixed price purchase order for MIM Software Subscription, License and Maintenance in support of Navy Medicine Readiness and Training Command (NMRTC) Portsmouth, Virginia. Provide all materials, labor and equipment to complete the required task. Additionally, the vendor is to provide any required travel and shipping.

This requirement is under North American Industry Classification System (NAICS) number 513210 - Software Publishers and Product Service Codes (PSC) D302 – IT and Telecom: Software Maintenance Services.

Period of Performance (PoP):

Base Year: 01 October 2026 – 30 September 2027 Option Year I: 01 October 2027 – 30 September 2028 Option Year II: 01 October 2028 – 30 September 2029 Option Year III: 01 October 2029 – 30 September 2030 Option Year IV: 01 October 2030 – 30 September 2031 Option Year V (FAR 52.217-8): 01 October 2031 – 30 March 2032

Competition Approach: Full and Open Competition

Submission of Quote: Prospective contractors are required to follow the instructions and requirements of Addendum to 52.212-1 and Addendum 52.212-2 included in this document.

Questions or Clarifications: All questions are to be submitted via email to the Contract Specialist, Luis Zeno-Pimentel, luis.a.zeno-pimentel.civ@health.mil and Contracting Officer, Melissa Peregrino, melissa.peregrino-white.civ@health.mil with email subject: RFQ HT940626QE082 – MIM Software. The Government may not respond to questions received less than 5 days prior to the due date and time for receipt of quotations.

Incumbent Contractor: This is a new contract.

Attachments:

Attachment I – Combined Synopsis and Solicitation / Request for Quote Attachment II - Past Performance Questionnaire Form mailto:luis.a.zeno-pimentel.civ@health.mil mailto:melissa.peregrino-white.civ@health.mil

ADDENDUM TO 52.212-1 INSTRUCTIONS TO OFFERORS—COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES.

a. Contract award. The Government intends to evaluate quotes and award a contract without discussions with Contractors. Therefore, the Contractor’s initial quote should contain the Contractor’s best terms. However, the Government reserves the right to conduct discussions, if necessary. The Government may reject any or all quotes if such action is in the public interest, accept other than the lowest quote, and waive informalities and minor irregularities in quotes received. This solicitation does not commit the Government to pay any costs incurred in the preparation and submission of a quote or for any other costs incurred by any contractor submitting a quote in response to this solicitation.

b. Submission of quotes. Submit signed and dated quotes to the office specified in this solicitation at or before the exact time specified in this solicitation. As a minimum, quotes shall include the following:

Proprietary information shall be clearly marked. Proprietary information submitted in response to this solicitation will be protected from unauthorized disclosure as required by Subsection 27 of the Office of Procurement Policy Act as amended (41 U.S.C. 423), hereinafter referred to as “the Act”, as implemented in the FAR.

Contractors must be registered in System for Award Management (SAM) in order to be eligible to be awarded a Department of Defense (DoD) contract.

Contractors must provide the information necessary to evaluate the factors contained in provision at Addendum 52.212-2. The Government will not make assumptions concerning intent, capabilities, or experiences. Clear identification of quote details is the sole responsibility of the offeror. Failure to clearly address all submittal requirements, evaluation criteria and information requirements of the RFQ may result in rejection of the offer.

Submission Requirements: Quote shall be submitted in four (4) separate volumes as shown below:

Volume Factor Title Format Page Limitation

I 1 Business Summary PDF 2

II

Technical Capability PDF 15

III 3 Past Performance PDF 4 except

CPARS

IV 4 Completed RFQ (include pricing)

PDF varies

Contractors shall not lock, encrypt, copy as an image, password protect or otherwise place barriers to opening files for their quote submissions. If the Government cannot access the electronic version to complete evaluation, the government will consider the quote invalid, and the quote will be deemed ineligible for award.

Incomplete offers may be considered non-responsive and removed from further consideration.

Additionally, to ensure a fair evaluation process, each contractor is permitted to submit only one quote. If a contractor submits more than one original quote, the government may invalidate all submissions from that contractor, who would then be considered ineligible for the contract award.

This policy does not apply to revised quotes requested by the government.

Format. All materials shall be in typeface Times New Roman 12 point (or Arial 12 point) and formatted to print on 8-1/2 x 11” white paper with one-inch margins all around. Tables and illustrations may use reduced font style but not less than 8-point. All material submitted may be single-spaced. Each page must provide identification of the submitting contractor in the header or footer.

The quote shall not contain any extraneous information such as advertisements or marketing information. Elaborated formats, or color presentations are not desired or required. Oral presentations will not be considered for this solicitation competition. The Government does not require any paper quotes and will not accept faxed quote copies.

Specific Instructions by Volume: Contractors shall provide each volume as explained below:

Volume I - Factor 1 Business Summary:

The contractor’s business summary must include the following details:

• Legal entity name and any "doing business as" alias.

• Full address and phone number.

• The address where the work will be performed (if different from your main address).

• CAGE Code and Unique Entity ID.

• GSA contract number(if applicable)

• Verification statement of their representations and certifications in SAM.gov affirming that these representations and certificates are current, complete, and accurate as of the date quotes are due.

• Period for acceptance of quotes. State whether the Contractor agrees to hold the prices in its quote firm for 90 calendar days from the date specified for receipt of quotes, unless another time period is specified in an addendum to the solicitation.

• Reference the RFQ number.

• Include a statement confirming your agreement with all terms, conditions, and provisions outlined in the solicitation.

• Acknowledgement of all amendments, if any.

• Affirm your company's ability to fulfill the stated requirement.

• Provide the total quoted price.

• The business summary document shall be signed by a company representative who is authorized to obligate the company. This person's contact information must also be included.

Volume II - Factor 2 Technical Capability – Do not include pricing information in this factor document.

Technical Capability Statement Requirements: To demonstrate the ability to meet the requirements of this RFQ, the capability statement must prove the contractor's expertise, qualifications, and authority to provide the required items and services. The submission must address the following areas:

• PWS Compliance and Execution Plan: The contractor must demonstrate a clear understanding of the requirements and detail how they will meet every part of the scope and each specific task in PWS. This section must include an implementation plan and an estimated transition timeframe.

• Proposed Solution Details: The statement must thoroughly describe all proposed items, resources, and methods, including specifications, performance capabilities, delivery schedules, and warranties.

• Equipment Condition: All parts and equipment must be brand new.

Volume III - Factor 3 Past Performance

To demonstrate their experience, contractors must provide up to three (3) examples of relevant work completed within the last three (3) years. If contractors submit more than three

(3) past performance references, the Government will evaluate the first three (3) identified past performance references in the order submitted. These examples must be similar in scope, magnitude, and complexity to the work described in this solicitation. Each example, limited to four pages – except for Contractor Performance Assessment Reports (CPARS), must include: Performance dates; an explanation of the services provided; ratings from the customer; and a valid and reachable point of contact with a phone number and email address. PPQs must not be completed by current or previous teaming partners.

Contractors may use the Past Performance Questionnaire (PPQ) Form (Attachment III), Contractor Performance Assessment Reports (CPARS), or another format as long as all the required information is included. If a contractor has no relevant past performance, they must submit a statement to that effect.

Volume IV - Factor 4 Price

Use Attachment I- Request for Quote to prepare and submit the price offer. Contractors shall provide the shipping price included in their quoted firm fixed price to facilitated price evaluation. The contractor may add rows, columns, or spreadsheets to accommodate the required pricing information. Contractors shall provide the necessary details and supporting information to address the solicitation requirements and to allow a complete analysis of each line-item price. All quoted prices must not contain more than two (2) decimal places and shall be Free on Board (FOB) Destination.

c. Submissions, Late submissions, modifications, revisions, and withdrawals of quotes.

a. Contractors are responsible for submitting quotes and any modifications or revisions electronically to the Contract Specialist, Luis Zeno-Pimentel, luis.a.zeno-pimentel.civ@health.mil and Contracting Officer, Melissa Peregrino, melissa.peregrino-white.civ@health.mil before or at 2:00pm Eastern Standard Time (EST) 18 September 2026. All correspondence shall reference RFQ HT940626QE082 – MIM Software in the email subject line and all enclosed documents.

b. Any quote, modification, or revision received after the time specified for receipt of quotes is “late” and will not be considered.

c. Contractors may withdraw their quotes by written notice to the Government received at any time before award.

d. Exceptions/Assumption to TOPR Requirements. Contractors are required to meet all solicitation requirements, such as terms and conditions; representations and certifications; and technical requirements. Failure to meet a requirement may result in an offer being ineligible for award. If necessary, contractors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. Each exception shall be specifically related to each paragraph and/or specific part of the solicitation to which the exception is taken. Provide rationale in support of the exception and fully explain its impact, if any, on the performance, schedule, price, and specific requirements of the solicitation. This information shall be provided in the format and content of table below.

Solicitation Document

Page/paragraph Requirement/Portion Rationale

PWS, Part X, Pricing Template, Past Performance

Applicable Page and Paragraph Numbers

Identify the requirement or portion to which exception is taken.

Describe Why the requirement can/will not be met.

(End of provision)

ADDENDUM TO 52.212-2 EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL

SERVICES

a. The Government will award a contract resulting from this solicitation to the responsible contractor whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered.

The Government intends to evaluate offers and issue a firm fixed price contract based on the initial offers received, utilizing the procedures found at Federal Acquisition Regulation (FAR) Overhaul Subpart 12.203 supplemented with additional information included in this document.

The Government intends to evaluate quotes and award a contract without discussions with Contractors. However, the Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary.

Contractors shall include all four (4) volumes listed in Addendum to 52.212-1. Incomplete quotes may be considered non-responsive and removed from further consideration.

BASIS FOR AWARD

This is a Best Value procurement. The Government may elect to award to other than the lowest priced quote where the perceived benefits merit the higher price, and the price is determined fair and reasonable. Conversely, the Government may select a lower-priced quote, and the technical capability is rated as acceptable.

The Government will review quotes to determine if they are complete and compliant with the solicitation requirements. A compliant quote is one that meets all the terms, conditions, and specifications in the solicitation. The contractor shall provide all documents listed and shall comply with all RFQ instructions for the quote to be considered “compliant and complete” with this solicitation. The Government may consider a contractor ineligible for award if any required document was not submitted by the required date and time; it is incomplete (missing items, signatures, etc.), or it does not comply with format requirements.

The following factors shall be used to evaluate quotes:

Factor 1: Business Summary;

Factor 2: Technical Capability;

Factor 3: Past Performance; and Factor 4: Price

Factor 2 is more important than Factor 1 and Factor 3, Factor 3 is more important than factor

1. Evaluation factors other than price when combined are significantly more important than price.

Factor 1 Business Summary: Evaluation of this factor will be for completeness.

Completeness: The business summary will be reviewed to determine the extent to which all the required elements listed in Addendum to 52.212-1 have been addressed. A business summary that fails to address all required elements may be excluded from further consideration.

Factor 2 Technical Capability/Medical Device and Equipment Risk Assessment Form:

Evaluation of this factor is a subjective evaluation of the contractor's understanding/capability/approach, demonstrated resources, and methods to meet all requirements.

The following adjectival ratings/definitions shall be used for the Technical Evaluation Factor. The combined technical/risk rating includes consideration of risk in conjunction with the strengths, weaknesses and deficiencies in determining technical ratings. Combined technical/risk evaluations shall utilize the combined technical/risk ratings listed below.

The contractor’s quote will be evaluated to determine whether the proposed capability approach demonstrates a clear and unambiguous understanding and a demonstrated ability to meet the requirements. Failure to demonstrate a clear and unambiguous capability approach to meeting the requirements will result in an “Unacceptable” rating for this factor.

Technical

Rating Description

Acceptable Quote meets requirements and indicates an adequate approach and understanding.

Unacceptable Quote does not meet requirements of the solicitation, and thus contains one or more deficiencies, and/or risk of unsuccessful performance is unacceptable.

Factor 3 Past Performance

Past performance is limited to a maximum of three (3) recent and relevant past performance references. Should more than three be submitted, the Government will evaluate only the first three in the order they were provided. Each reference must meet the definition for recency and relevancy (see definitions below). PPQs must not be completed by current or previous teaming partners.

Contractors will be assigned an overall Performance Confidence Assessment (PCA), see below, which is based on an integrated assessment of the Contractor’s relevant and recent past performance.

The resulting PCA represents an overall evaluation of Contractor performance. Contractors without a record of relevant past performance or for whom information on past performance is so sparse that no meaningful confidence assessment rating can be reasonably assigned will not be evaluated favorably or unfavorably on past performance and, as a result, will receive a "Neutral Confidence" rating for the Past Performance factor.

The Government reserves the right to use both information provided from Contractors as well as information obtained from other sources available to the Government, to include, but not limited to, CPARS, Federal Awardee Performance and Integrity Information System (FAPIIS), or other databases; interviews with Program Managers, Contracting Officers, Contracting Officers Representatives, and commercial sources and/or non-Government sources.

Recency Assessment: An assessment of the past performance information contained in the contractor’s submittals will be made to determine if it is recent. The documentation submitted must demonstrate that the contractor is or has been performing within the past three (3) years prior to the closing date of this solicitation.

Relevancy Assessment: An assessment of the past performance information will be made to determine if it is relevant. To be relevant, the submitted documentation must be for efforts that involved similar scope, magnitude of effort, and complexity that the solicitation requires.

The Government will use the following relevancy definitions/ratings when assessing relevant past performance.

Adjectival Rating Description Relevant Present/past performance effort involved similar scope and magnitude of effort and complexities this solicitation requires.

Not Relevant Present/past performance effort involved little or none of the scope and magnitude of effort and complexities this solicitation requires.

Neutral No relevant performance record is available, or the Contractor’s performance record is so sparse that no meaningful relevancy assessment can be reasonably assigned.

Performance Confidence Assessment (PCA): The Government will consider the performance quality of relevant and recent efforts and assign an overall PCA. Those rated neutral for relevancy will receive a neutral confidence PCA. Contractors with experience providing the same services required by this solicitation may weigh more heavily than less relevant, less recent past performance.

The confidence ratings noted in the table below will be used. The performance quality of the work performed will be assessed using the PPQ, CPARS report and/or contact with the POC listed on the submittal to obtain information regarding past performance as it relates to providing the services required under this solicitation. Contractors whose past performance is rated limited, or no confidence will not be evaluated further.

Performance Confidence Assessments

RATING DESCRIPTION

Substantial Confidence

Based on the Contractor’s relevant performance record, the Government has a high expectation that the Contractor will successfully perform the required effort.

Satisfactory Confidence

Based on the Contractor’s relevant performance record, the Government has a reasonable expectation that the Contractor will successfully perform the required effort.

Limited Confidence

Based on the Contractor’s relevant performance record, the Government has a low expectation that the Contractor will successfully perform the required effort.

No Confidence

Based on the Contractor’s relevant performance record, the Government has no expectation that the Contractor will be able to successfully perform the required effort.

Neutral Confidence

No relevant performance record is available, or the Contractor’s performance record is so sparse that no meaningful confidence assessment rating can be reasonably assigned.

The Contractor may not be evaluated favorably or unfavorably on the factor of past performance.

Factor 4 Price: The Government will evaluate price for completeness and whether quoted prices are fair and reasonable. Prices must be entirely compatible with the capability portion of the quote.

Completeness: The Contractor’s pricing sheet will be reviewed to determine the extent to which the quote fulfills the solicitation requirements and whether all the price elements have been addressed.

The Contractor’s proposed price will be evaluated to ensure continuity and traceability of prices to the solicitation requirements. The Government may make a final rating determination based on the quote as submitted without requesting any further information.

Fair and Reasonable: The degree to which the proposed prices, base period and Option periods, compared to the prices, a reasonably prudent person would expect to incur for the same or similar services. The Factor 4 – Price/Attachment II – Pricing Template and any pricing information submitted will be evaluated to identify unusual high-price, inconsistent pricing patterns, and potential misunderstandings of the requirement. Comparison of quoted prices received in response to the solicitation and/or comparison of quoted prices with the Independent Government Estimate and historical prices may be used to determine whether a price is fair and reasonable. A contractor with pricing that reasonableness is determined to be questionable for any period of performance may not be considered for award.

(c) Options. The Government will evaluate quotes for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that a quote is unacceptable if the Option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(d) A written notice of award or acceptance of a quote, mailed or otherwise furnished to the successful contractor within the time for acceptance specified in the quote, shall result in a binding contract without further action by either party. Before the quote’s specified expiration time, the Government may accept a quote (or part of a quote), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

Solicitation/Contract Form MIM Software

Product Service Code: 7A20

HT940626QE082

Supplies or Services & Prices or Costs Additional Information/Notes

Item Supplies / Services Quantity Unit Unit Price Amount

MIM SOFTWARE

See Performance Work Statement

Manufacturer's Part Number: See Equipment List Pricing Arrangement: Firm Fixed Price

1 Each

Option Line Item

MIM SOFTWARE

See Performance Work Statement

Manufacturer's Part Number: See Equipment List Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

MIM SOFTWARE

See Performance Work Statement

Manufacturer's Part Number: See Equipment List Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

MIM SOFTWARE

See Performance Work Statement

Manufacturer's Part Number: See Equipment List Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

MIM SOFTWARE

See Performance Work Statement

Manufacturer's Part Number: See Equipment List Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

MIM SOFTWARE

See Performance Work Statement

Manufacturer's Part Number: See Equipment List Pricing Arrangement: Firm Fixed Price

1 Job

Description/Specifications/Statement of Work

1.0 GENERAL INFORMATION

1.1 This is a non-personal services contract to provide MIM Software Subscription, License and Maintenance Services

1.1.1 Description of services/introduction: The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform MIM Software as defined in this Performance Work Statement (PWS).

1.1.2 Background: MIM, or Medical Image Merge, is an imaging fusion product designed to register, manipulate, and read DICOM images

1.1.3 Scope: The contractor shall accomplish

2- MIM - FSCOCASU-DD

MIM Maestro Department Solution Provides Radiation Oncology Department access to:

MIM Maestro MIM Assistant Support and Upgrade Coverage for (2) treatment rooms

Vendor shall provide all software maintenance. Releases are to be sent to the NMCP Radiology Department:

Naval Medical Center Portsmouth 620 John Paul Jones Circle Attn: Debbie Smith - Radiation Oncology Division Portsmouth, VA 23708 Supplies, software/license shall be provided free of all additional royalties or charges.

All supplied software must be certified free of damaging properties such as viruses, Trojan horses, worms, etc.

NMCP recognizes that the use of all supplied software is for the sole use of NMCP. NMCP agrees not to share, sell, copy, and lease or assign supplied software without the expressed permission of vendor.

NMCP shall make all attempts to preserve proprietary nature of all supplied software. Vendor shall take all reasonable measures to safeguard any and all NMCP file data (i.e. vendor shall not share any medical records/data collected by supplied software).

All technical support personnel must be adequately trained and knowledgeable of supplied software.

1.1.4 Period of Performance (PoP):

Base Year - 1 OCT 2026 - 30 SEP 2027 Option 1 1 OCT 2027 - 30 SEP 2028 Option 2 1 OCT 2028 - 30 SEP 2029 Option 3 1 OCT 2029 - 30 SEP 2030 Option 4 1 OCT 2030 - 30 SEP 2031

1.2 Administrative specifications

1.2.1 Place of performance: The work shall be performed at Radiology Department:- Radiation Oncology.

Naval Medical Center Portsmouth 620 John Paul Jones Circle Attn: Stephen Lewis - Radiation Oncology Division Portsmouth, VA

1.2.2 Recognized Federal holidays: [State if the contractor is or is not required to perform services on holidays.] New Year's Day Labor Day Martin Luther King Jr.'s Birthday Columbus Day President's Day Veteran's Day Memorial Day Thanksgiving Day Juneteenth Day Christmas Day Independence Day

1.2.3 Hours of operation: The contractor is responsible for conducting business Monday thru Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. The contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons.

Vendor to provide support during work hours of 8:00am - 6:00pm (EST) Monday - Friday except Federal Holidays. After normal working hours the MIMs employees can be reached by pager.

1.2.4 Emergency Services:. On occasion, services may be required to support an activation or exercise of contingency plans outside the normal duty hours.

1.3 Contractor Identification

1.3.1 Contractor personnel performing services in a contractor capacity in a Government facility are required to possess and wear an identification badge that displays his or her name and the name of their company. Ensure all those with whom the person interacts in any face-to-face dealings while supporting the Governemnt understands that the person is contractor support personnel.

2.0 SPECIFIC TASKS

2.4 Software Updates:

Support and maintenance services includes technical support via phone, email, and MIM Portal request support as described at www.mimsoftware.com/support, and patches, updates, and upgrades to the On-Premise Software as needed.

3.0 Qualifications/Considerations

3.1 Special Qualifications/Considerations: Software and/or hardware must be an approved product by the Defense Health Agency (DHA), and authorized to be used on the DHA network.

Requirements MIM Software

Product Service Code: 7A20

Option Line Item

Product Service Code: 7A20

Option Line Item

Product Service Code: 7A20

Option Line Item

Product Service Code: 7A20

Option Line Item

Product Service Code: 7A20

Option Line Item

Product Service Code: 7A20

Packaging and Marking

Inspection and Acceptance

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.246-1 Contractor Inspection Requirements. Apr 1984 Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: HT0242 CountryCode: USA

NAV MED CNT PORTSMOUTH VA - MM

ATTN SUPPLY OFFICER BLDG 250, 54 LEWIS MINOR STREET

PORTSMOUTH, VA 23708-2297

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: HT0242 CountryCode: USA

NAV MED CNT PORTSMOUTH VA - MM

ATTN SUPPLY OFFICER BLDG 250, 54 LEWIS MINOR STREET

PORTSMOUTH, VA 23708-2297

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: HT0242 CountryCode: USA

NAV MED CNT PORTSMOUTH VA - MM

ATTN SUPPLY OFFICER BLDG 250, 54 LEWIS MINOR STREET

PORTSMOUTH, VA 23708-2297

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: HT0242 CountryCode: USA

NAV MED CNT PORTSMOUTH VA - MM

ATTN SUPPLY OFFICER BLDG 250, 54 LEWIS MINOR STREET

PORTSMOUTH, VA 23708-2297

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both

Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: HT0242 CountryCode: USA

NAV MED CNT PORTSMOUTH VA - MM

ATTN SUPPLY OFFICER BLDG 250, 54 LEWIS MINOR STREET

PORTSMOUTH, VA 23708-2297

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: HT0242 CountryCode: USA

NAV MED CNT PORTSMOUTH VA - MM

ATTN SUPPLY OFFICER BLDG 250, 54 LEWIS MINOR STREET

PORTSMOUTH, VA 23708-2297

UNITED STATES

Deliveries or Performance

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

Delivery Period From 01 Oct 2026 to 30 Sep

1 Each Service Performance Site DoDAAC: HT0242 CountryCode: USA

NAV MED CNT PORTSMOUTH VA - MM

ATTN SUPPLY OFFICER BLDG 250, 54 LEWIS MINOR

STREET

PORTSMOUTH, VA 23708-2297

UNITED STATES

FoB Details Contractor Destination

Option Line Item

Delivery Period From 01 Oct 2027 to 30 Sep

1 Job Service Performance Site DoDAAC: HT0242 CountryCode: USA

NAV MED CNT PORTSMOUTH VA - MM

ATTN SUPPLY OFFICER BLDG 250, 54 LEWIS MINOR

STREET

PORTSMOUTH, VA 23708-2297

UNITED STATES

FoB Details Contractor Destination

Option Line Item

Delivery Period From 01 Oct 2028 to 30 Sep

1 Job Service Performance Site DoDAAC: HT0242 CountryCode: USA

NAV MED CNT PORTSMOUTH VA - MM

ATTN SUPPLY OFFICER BLDG 250, 54 LEWIS MINOR

STREET

PORTSMOUTH, VA 23708-2297

UNITED STATES

FoB Details Contractor Destination

Option Line Item

Delivery Period From 01 Oct 2029 to 30 Sep

1 Job Service Performance Site DoDAAC: HT0242 CountryCode: USA

NAV MED CNT PORTSMOUTH VA - MM

ATTN SUPPLY OFFICER BLDG 250, 54 LEWIS MINOR

STREET

PORTSMOUTH, VA 23708-2297

UNITED STATES

FoB Details Contractor Destination

Option Line Item

Delivery Period From 01 Oct 2030 to 30 Sep

1 Job Service Performance Site DoDAAC: HT0242 CountryCode: USA

NAV MED CNT PORTSMOUTH VA - MM

ATTN SUPPLY OFFICER BLDG 250, 54 LEWIS MINOR

STREET

PORTSMOUTH, VA 23708-2297

UNITED STATES

FoB Details Contractor Destination

Option Line Item

Delivery Period From 01 Oct 2031 to 31 Mar

1 Job Service Performance Site DoDAAC: HT0242 CountryCode: USA

NAV MED CNT PORTSMOUTH VA - MM

ATTN SUPPLY OFFICER BLDG 250, 54 LEWIS MINOR

STREET

PORTSMOUTH, VA 23708-2297

UNITED STATES

FoB Details Contractor Destination

Contract Administration Data

VENDOR TO COMPLETE THE FOLLOWING:

Vendor Point of Contact: Email:

Vendor Phone: Fax:

Vendor UEI:

POINTS OF CONTACT

Naval Medical Center Portsmouth Points of Contact:

Name: LUIS ZENO Phone: 757-953- 6084 E-Mail: luis.a.zeno-pimentel.civ@health.mil

REQUEST FOR QUOTE INFORMATION & EVALUATION FACTORS

Vendor to reference Request for Quotation (RFQ) Number HT940626QE082 on all correspondence relating to this RFQ

The government will make an award based on an "All or None" evaluation and/or based on the "Best Value" proposed for this requirement in terms of technical capabilities, & price. Vendors must provide all of the below to be considered a "responsive vendor".

Quote Evaluation factors for Best Value will be rated as follows (in order of importance):

Technical capabilities

Price evaluation Vendor to provide a published price list (not a GSA contract price list) and two invoices for the same or similar services or supplies.

PAYMENT INFORMATION

Payment in Arrears (Check One): Monthly Quarterly Semi-Annually Annually *Please ensure that quoted price matches the choice above

Note: Vendor will be required to provide billing electronically via the WAWF Electronic Invoicing Method per Section G of this RFQ. For additional information, a review of the following web sites may be required: Websites: https://wawf.eb.mil http://wawftraining

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.201-7000 Contracting Officer's Representative. Dec 1991 252.204-7006 Billing Instructions-Cost Vouchers May 2023 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Electronic invoicing.

Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site WAWF training.

before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https:// wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol. WAWF methods of document submission.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for WAWF payment instructions.

this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating Document routing.

payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC HQ0490

Issue By DoDAAC HT9406

Admin DoDAAC HT9406

Inspect By DoDAAC N/A

Ship To Code HT0242

Ship From Code N/A

Mark For Code N/A

Service Approver (DoDAAC) HT0242

Service Acceptor (DoDAAC) HT0242

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Special Contract Requirements

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017 52.204-9 Personal Identity Verification of Contractor Personnel. Jan 2011 52.204-13 System for Award Management-Maintenance. (Deviation 2026-O0038) Feb 2026

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026-O0038)

Feb 2026

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026-O0038) Feb 2026 52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (Deviation 2026-O0038) Feb 2026 52.222-3 Convict Labor. (Deviation 2026-O0038) Feb 2026 52.222-19 Child Labor-Cooperation with Authorities and Remedies. (Deviation 2026-O0038) Mar 2026 52.222-35 Equal Opportunity for Veterans. (Deviation 2026-O0038) Feb 2026 52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026-O0038) Feb 2026 52.222-37 Employment Reports on Veterans. (Deviation 2026-O0038) Feb 2026 52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038) Feb 2026 52.222-54 Employment Eligibility Verification. (Deviation 2026-O0038) Feb 2026 52.222-90 Addressing DEI Discrimination by Federal Contractors. (Deviation 2026-O0040, Revision 1) Apr 2026 52.223-23 Sustainable Products. (Deviation 2026-O0038) Feb 2026 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.229-12 Tax on Certain Foreign Procurements. (Deviation 2026-O0038) Feb 2026 52.232-1 Payments. Apr 1984 52.232-8 Discounts for Prompt Payment. Feb 2002 52.232-18 Availability of Funds. Apr 1984 52.232-25 Prompt Payment. Jan 2017 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. Mar 2023 52.233-1 Disputes. (Deviation 2026-O0038) Feb 2026 52.233-3 Protest after Award. (Deviation 2026-O0038) Feb 2026 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-O0038) Feb 2026 52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-O0038) Feb 2026 52.243-1 Changes-Fixed-Price. (Deviation 2026-O0038) Feb 2026 52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026-O0038) Apr 2026 52.249-8 Default (Fixed-Price Supply and Service). Apr 1984

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.203-7003 Agency Office of the Inspector General. Aug 2019 252.204-7004 Antiterrorism Awareness Training for Contractors. Jan 2023 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. May 2024 252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services. Jan 2023 252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7001 Buy American and Balance of Payments Program. Feb 2024 252.225-7002 Qualifying Country Sources as Subcontractors. Mar 2022 252.225-7012 Preference for Certain Domestic Commodities. Apr 2022 252.225-7048 Export-Controlled Items. Jun 2013 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region. Jun 2023 252.232-7010 Levies on Contract Payments. Dec 2006 252.243-7001 Pricing of Contract Modifications. Dec 1991 252.247-7023 Transportation of Supplies by Sea. Oct 2024

FAR Clauses Incorporated by Full Text

52.217-8 Option to Extend Services. (Nov 1999)

OPTION TO EXTEND SERVICES (NOV 1999)

The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within [insert the 10 days period of time within which the Contracting Officer may exercise the option].

(End of clause)

52.217-9 Option to Extend the Term of the Contract. (Mar 2000)

OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)

The Government may extend the term of this contract by written notice to the Contractor within [insert the period of time within which the Contracting (a) 5 days Officer may exercise the option]; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least days[60 60days

] before the contract expires. The preliminary notice does not commit the Government to an extension.unless a different number of days is inserted

If the Government exercises this option, the extended contract shall be considered to include this option clause.(b)

The total duration of this contract, including the exercise of any options under this clause, shall not exceed (months) (years).(c) 5

(End of clause)

52.252-2 Clauses Incorporated by Reference. (Feb 1998)

CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://acquisition.gov/far/ [Insert one or more Internet addresses]http://www.acq.osd.mil/dpap/dars/dfars/index.htm ____

(End of clause)

DFARS Clauses Incorporated by Full Text

252.211-7003 Item Unique Identification and Valuation. (Jan 2023)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) . As used in this clause- Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again.