Combined - N0016726Q1053.pdf

This is a combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Subpart 12.6 and Subpart 13 as supplemented with additional information included in this notice. Naval Surface Warfare Center Carderock Division (NSWCCD) intends to award a firm fixed price (FFP) purchase order using Simplified Acquisition Procedures for Ultrasonic Impact Treatment (UIT) and Hammer Peening of HY-100 Weldments that meets the specifications outlined below. This solicitation is set aside for small business. This announcement constitutes the only solicitation and a written solicitation will not be issued. Quotes are being requested under Request for Quotation (RFQ) no.

N0016726Q1053. The NAICS code is 541380 and the business size standard is $19 millions of dollars employees.

The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2026-01 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20251110. SEE ATTACHED

SOLICITATION FOR CLAUSES AND PROVISIONS.

The Government will award a contract resulting from this solicitation to the responsible quoter whose quote, conforming to the solicitation that will be most advantageous to the Government, price and other factors considered. The Government intends to evaluate all timely quotes received from eligible quoters on a lowest price technically acceptable (LPTA) basis. The Government intends to evaluate quotations and award a contract without discussions with quoters.

Evaluation Factors (See 52.212-2- Evaluation—Commercial Products and Commercial Services)

1. Price – Quotes must include all applicable costs.

2. Technical – Quotes must reflect the required specifications included in the RFQ.

Questions/clarification regarding this solicitation must be submitted via email to michael.s.brodie7.civ@us.navy.mil by Tuesday, March 24 2026 12:00 pm EST. All questions will be answered in an amendment to the solicitation.

Quote packages are due by Friday, 27 March 2026 12:00 PM EST. Late quotes will not be considered. Quote packages shall be sent to michael.s.brodie7.civ@us.navy.mil and contain the following information by separate cover sheet or within the body of the email response:

a) Official Company Name;

b) Point of contact including name and phone number; and

c) Cage Code number; and

d) SAM UEI number.

The Point of Contact for this acquisition is Mike Brodie, at michael.s.brodie7.civ@us.navy.mil.

mailto:michael.s.brodie7.civ@us.navy.mil mailto:michael.s.brodie7.civ@us.navy.mil

Solicitation/Contract Form Continuation

UIT hammer peening and Treatment Procedure Development Services

N0016726Q1053

Continuation of Supplies or Services and Prices/Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

Peening & shipping services for 54 HY-10 In Accordance With Performance Work Statement 3.1 Initial Treatment Batch Hammer Peening 8 Tee / 8 Butt UIT Peening 22 Tee / 16 Butt

Pricing Arrangement: Firm Fixed Price

1 Lot

Option Line Item

Peening & shipping services for 54 HY-10 In Accordance with Performance Work Statement (PWS) 3.2 Second Treatment Batch 8 Tee / 8 Butt - either UIT or Hammer Peening

Pricing Arrangement: Firm Fixed Price

1 Lot

Continuation of Description

PERFORMANCE WORK STATEMENT (PWS)

Ultrasonic Impact Treatment and Hammer Peening of HY-100 Weldments (base with option)

1. Description of Services/introduction

Naval Surface Warfare Center, Carderock Division (NSWCCD) Codes 61, 62, and 65 are investigating the effects of ultrasonic impact peening treatment (UIT) and hammer peening on the fatigue performance of HY- 100 weldments. To support this investigation, the NSWCCD needs to procure procedure development, UIT and hammer peening services. This purchase, and subsequent testing, supports NAVSEA PMS450 Task No. 450-T- 0055 Welding Fatigue Improvement.

2. Objective

The objective of this purchase is to procure procedure development, UIT and hammer peening services from a single contractor. The contractor shall develop the treatment procedure and provide to the Government for approval. The Government will provide Tee and Butt weldments to the contractor for UIT and hammer peening treatments. The weldments will be provided in batches, described in Section 2.3. For base contract Initial Batch Treatments, the contractor shall perform both UIT and hammer peening, per Section 2.3.1. The Government will purchase Second Batch Treatment services, either UIT or hammer peening, as an exercised contract option, per Section 2.3.2. The full list of services required and requirements for each service are provided below.

2.1 Contractor Responsibilities

- The contractor shall only perform work as directed in the official purchase order (PO) issued by contracting agency (NSWCCD). This technical statement of work does not in itself constitute a binding contract.

- The contractor shall adhere to commercial best practices for maintaining specimen identification throughout the machining and packaging processes. Specimens will be identified and labeled upon delivery to the contractor. The contractor shall reference the provided IDs to track which treatments are applied to which specimens.

- The contractor shall handle all Government furnished material with care so that no damage, scratches, gouges, or dents, are inflicted on the material.

- The contractor shall be responsible for initiating the UIT and hammer peening within 5 business days of the date that the samples are received or the treatment plan is approved by NSWCCD, whichever date comes second.

- The contractor shall complete all UIT and hammer peening treatments, for each batch provided by The Government, within 2 months of receipt of material.

- The contractor shall ship treated weldments back to NSWCCD. All shipped material shall be packaged to preserve the integrity and maintain the identity of the specimens.

- The contractor shall be responsible for submitting invoices to the Government within two months from the time of Government review and acceptance of all treated weldments.

2.2 Hammer Peening and UIT Treatment Requirements

The contractor shall document and develop a treatment plan for the weldments based on industry best practices and provide it to the NSWCCD for review and approval.

The treatment plan shall cover hammer peening and UIT treatments for the provided butt and tee weldments.

The contractor shall apply both types of weld treatments with robotic tools.

The contractor's UIT equipment shall be powered by a magnetostrictive transducer.

The contractor's UIT equipment shall be able to perform at a 100% duty cycle.

The contractor shall use pneumatic equipment for hammer peening treatments.

For each specimen, the contractor will apply the treatment to every weld toe. There are 2 weld toes on each tee joint, and 4 weld toes on each butt joint.

2.3 Treatment Quantities

2.3.1 (BASE CONTRACT) Initial Treatment Batch

Treatment Type Tee Weldments Butt Weldments

Hammer Peening 8 8

UIT Peening 22 16

2.3.2 (OPTION) Second Treatment Batch

The weldments provided in the second treatment batch will be treated with either hammer peening or UIT peening. The treatment method is dependent on Government testing that will take place after the first treatment batch is returned. The Government will confirm the treatment method upon exercise of option and prior to shipping the second treatment batch.

Treatment Type Tee Weldments Butt Weldments

Hammer or UIT peening 8 8

2.4 Return of Materials

The contractor shall ship all material back to the Government at the performer's expense within

10 business days of the treatment completion date of all Government provided weldments.

Completed weldments shall be shipped to:

Attn: TBD At Award

Naval Surface Warfare Center, Carderock

Code 612, Building 60, Room 172

9500 MacArthur Boulevard

West Bethesda, MD 20817

3. Special Qualifications

3.1 The contractor shall be a US based company.

4. Specimen Tracking and Labeling

NSWCCD will label all specimens prior to shipping them to the contractor site for treatment. The contractor shall not remove any existing labels from the weldments, and the contractor shall reference the provided ID numbers whenever necessary.

5. Government Furnished Material

The Government will ship the weldments to the contractor in two batches, quantities are defined in section 2.3.

The approximate size of each weldment is 35 inches x 5 inches x 1.5 inches. The weld length is approximately 5 inches long. The weldments are made of HY-100 material welded with MIL-100S filler material. The Government may provide scrap material for the contractor to use in setup.

5.1 Butt Weld Specimen Geometry

All provided butt weld specimens will be the same size.

Figure 1. Butt Joint Geometry

See Attached PWS

5.2 Tee Weld Specimen Geometry

All provided tee weld specimens will be the same size.

Figure 2. Tee Joint Geometry

See Attached PWS

6. Deliverables

6.1 CDRL A001, Treatment Plan - Hammer and Ultrasonic Peening

The contractor shall provide a treatment plan that includes the hammer peening and ultrasonic impact treatment procedures that will be applied to the described weldments. Requirements are defined in Section 2.2. The plan shall be signed by the cognizant senior engineer overseeing this project. The contractor shall electronically provide the treatment plan to the Government TPOC two weeks following award of contract. Within three weeks of receipt of procedures, the TPOC will approve the procedures as submitted, or request the contractor provide revisions within timeframe determined by the TPOC. If procedures need revisions the contractor shall provide the procedures within three weeks and resubmit to the TPOC for review.

7. Period and Place of Performance

7.1 The period of performance for the base contract is 12 months from the date of contract award. The period of performance for the option is one year from time of option award.

7.2 Work associated with this PWS will occur at the contractor site.

8. Security Requirements

All work on this contract shall not exceed the classification UNCLASSIFIED.

9. Government Technical Point of Contact

TBD At Award

Requirements Procedure development, UIT and hammer peening services.

Continuation of Packaging and Marking

Continuation of Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: Material inspection and acceptance at Government facility. See attached document for details.

DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION, 9500 MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: Material inspection and acceptance at Government facility. See attached document for details.

DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION, 9500 MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Continuation of Deliveries or Performance

Overall Contract Delivery Period

Contractor Destination

Line Item Delivery Schedule Quantity Address and POC

Delivery Period From 31 Mar 2026 to 30 Sep

1 Lot Ship To DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION BLDG 143, 9500 MACARTHUR

BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Option Line Item

Delivery Period From 31 Mar 2026 to 30 Sep

1 Lot Ship To DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION BLDG 143, 9500 MACARTHUR

BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Continuation of Accounting and Appropriation Data

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017 52.204-13 System for Award Management-Maintenance. (Deviation) Feb 2026 52.219-6 Notice of Total Small Business Set-Aside. (Deviation) Feb 2026 52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation) Feb 2026 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.233-3 Protest after Award. (Deviation) Feb 2026 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation) Feb 2026 52.229-13 Taxes-Foreign Contracts in Afghanistan. Nov 2021 52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (Deviation) Feb 2026

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.204-7022 Expediting Contract Closeout. May 2021 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region. Jun 2023 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018 252.232-7010 Levies on Contract Payments. Dec 2006 252.245-7005 Management and Reporting of Government Property. Jan 2024 252.247-7023 Transportation of Supplies by Sea. Oct 2024

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause--Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003 , Electronic Submission of Payment Requests and Receiving Reports.

(b) . The WAWF system provides the method to electronically process vendor payment requests and receiving Electronic invoicing reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003 , Electronic Submission of Payment Requests and Receiving Reports.

(c) . To access WAWF, the Contractor shall--WAWF access

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

N0016726Q1053 https://www.acquisition.gov/dfars/252.232-7003-electronic-submission-payment-requests-and-receiving-reports.#DFARS_252.232-7003 https://www.acquisition.gov/dfars/252.232-7003-electronic-submission-payment-requests-and-receiving-reports.#DFARS_252.232-7003

(d) . The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the WAWF training Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) . Document submissions may be via web entry, Electronic Data Interchange, or File WAWF methods of document submission Transfer Protocol.

(f) . The Contractor shall use the following information when submitting payment requests and receiving WAWF payment instructions reports in WAWF for this contract or task or delivery order:

(1) . The Contractor shall submit payment requests using the following document type(s):Document type

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items--

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Report (COMBO)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

Invoice and Receiving Report (COMBO)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC N62825

Issue By DoDAAC N00167

Admin DoDAAC** N00167

Inspect By DoDAAC N00167

Ship To Code N00167

Ship From Code TBD

Mark For Code ____

Service Approver (DoDAAC) ____

Service Acceptor (DoDAAC) ____

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216- 7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Technical questions Ademola Oriowo 301-503-0809 email ademola.m.oriowo.civ@us.navy.mil

Invoice questions TBD at Contract Award

NAVSEA Helpdesk at usn.ncr.sea-01.mbx.wawf-hq-functional-mail-box@us.navy.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Addendum to 52.212-4, Contract Terms and Conditions - Commercial Products and Commercial Services

Contract Terms and Conditions Required To Implement Statutes or Executive Orders — Commercial Products and Commercial Services

Addendum to Contract Clauses

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation) Feb 2026 52.222-3 Convict Labor. (Deviation) Feb 2026 52.240-91 Security Prohibitions and Exclusions. (Deviation) Feb 2026 52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation) Feb 2026 52.245-1 Government Property. Sep 2021 52.245-9 Use and Charges. Apr 2012

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel. Jan 2023 252.245-7003 Contractor Property Management System Administration Jan 2025

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

(DEVIATION 2024-O0013 REVISION 1)

May 2024 Deviation 2024-O0013 May 2024

252.225-7972 Prohibition on the Procurement of Foreign-Made Unmanned Aircraft Systems. (DEVIATION 2024-O0014)

Aug 2024 Deviation 2024-O0014 Aug 2024

FAR Clauses Incorporated by Full Text

52.252-2 Clauses Incorporated by Reference. (Feb 1998)

Clauses Incorporated By Reference (Feb 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.ecfr.gov/current/title-48

(End of clause)

52.252-6 Authorized Deviations in Clauses. (Nov 2020)

Authorized Deviations in Clauses (Nov 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any clause with an authorized deviation is Defense Federal Acquisition Regulation (48 CFR 2) indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services.

(DEVIATION 2025-O0003 and 2025-O0004)

(Oct 2025) Deviation 2025-O0004 (Mar 2025)

CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS-COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAR 2025) (DEVIATION 2025-O0003 AND 2025-O0004)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (section 743 of Division E, Title (JAN 2017) VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (DEC (Section 1634 of Pub. L. 115-91).2023)

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section (NOV 2021) 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations .(NOV 2015)

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (31 U.S.C. 3903 and 10 U.S.C. 3801).(MAR 2023)

(6) 52.233-3, Protest After Award (31 U.S.C. 3553).(AUG 1996)

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).(OCT 2004)

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ .]Contracting Officer check as appropriate

52.203-6, Restrictions on Subcontractor Sales to the Government with (41 U.S.C. 4704 and 10 U.S.C. (1) (JUN 2020), Alternate I (NOV 2021) 4655).

52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509)).(2) (NOV 2021)

52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Section 1553 of Pub. L. 111-(3) (JUN 2010) 5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, (4) (NOV 2023) the Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).

52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Pub. L. 109-282) ( 31 U.S.C. 6101 note).(5) (JUN 2020)

[Reserved].(6)

52.204-14, Service Contract Reporting Requirements (Pub. L. 111-117, section 743 of Div. C).(7) (OCT 2016)

52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Pub. L. 111-117, section 743 of Div. C).(8) (OCT 2016)

52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328).(9) (JUN 2023)

52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, and (10) Multi-Agency Contracts. (Pub. L. 115-390, title II).(DEC 2023)

(11)

52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub. L. 115-390, title II).(i) (DEC 2023)

Alternate I of 52.204-30.(ii) (DEC 2023)

(12) 52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. ( 2025) (31 U.S.C. 6101 note).JAN

52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (41 U.S.C. 2313).(13) (OCT 2018)

[Reserved].(14)

52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award ( ) (15 U.S.C. 657a).(15) OCT 2022

52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns ( ) (if the offeror elects to waive the (16) OCT 2022 preference, it shall so indicate in its offer) (15 U.S.C. 657a).

[Reserved](17)

(18)

52.219-6, Notice of Total Small Business Set-Aside (15 U.S.C. 644).(i) (NOV 2020)

Alternate I of 52.219-6.(ii) (MAR 2020)

(19)

52.219-7, Notice of Partial Small Business Set-Aside (15 U.S.C. 644).(i) (NOV 2020)

Alternate I of 52.219-7.(ii) (MAR 2020)

52.219-8, Utilization of Small Business Concerns (15 U.S.C. 637(d)(2) and (3)).(20) ( )JAN 2025

(21)

52.219-9, Small Business Subcontracting Plan (15 U.S.C. 637(d)(4)).(i) ( )JAN 2025

Alternate I of 52.219-9.(ii) (NOV 2016)

Alternate II of 52.219-9.(iii) (NOV 2016)

Alternate III of 52.219-9.(iv) (JUN 2020)

Alternate IV of 52.219-9.(v) ( )JAN 2025

(22)

52.219-13, Notice of Set-Aside of Orders (15 U.S.C. 644(r)).(i) (MAR 2020)

Alternate I of 52.219-13.(ii) (MAR 2020)

52.219-14, Limitations on Subcontracting ( ) (15 U.S.C. 657s).(23) OCT 2022

52.219-16, Liquidated Damages-Subcontracting Plan (15 U.S.C. 637(d)(4)(F)(i)).(24) (SEP 2021)

52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns (25) Eligible Under the SDVOSB Program ( ) (15 U.S.C. 657f).FEB 2024

(26)

52.219-28, Small Business Program Rerepresentation (15 U.S.C. 632(a)(2)).(i) Postaward ( )JAN 2025

Alternate I of 52.219-28.(ii) (MAR 2020)

52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns ((27) OCT ) (15 U.S.C. 637(m)).2022

52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned (28) Small Business Program ( ) (15 U.S.C. 637(m)).OCT 2022

52.219-32, Orders Issued Directly Under Small Business Reserves (15 U.S.C. 644(r)).(29) (MAR 2020)

52.219-33, Nonmanufacturer Rule (15 U.S.C. 637(a)(17)).(30) (SEP 2021)

52.222-3, Convict Labor (E.O.11755).(31) (JUN 2003)

(32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (E.O. 13126).(JAN 2025)

[Reserved](33)

[Reserved](34)

(35)

52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212).(i) (JUN 2020)

Alternate I of 52.222-35.(ii) (JUL 2014)

(36)

52.222-36, Equal Opportunity for Workers with Disabilities (29 U.S.C. 793).(i) (JUN 2020)

Alternate I of 52.222-36.(ii) (JUL 2014)

52.222-37, Employment Reports on Veterans ( ) (38 U.S.C. 4212).(37) JUN 2020

52.222-40, Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496).(38) (DEC 2010)

(39)

52.222-50, Combating Trafficking in Persons (22 U.S.C. chapter 78 and E.O. 13627).(i) (NOV 2021)

Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(ii) (MAR 2015)

(40) 52.222-54, Employment Eligibility Verification (Executive Order 12989). (Not applicable to the acquisition of commercially (JAN 2025) available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

(41)

52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not (i) applicable to the acquisition of commercially available off-the-shelf items.)

Alternate I of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf (ii) (MAY 2008) items.)

52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (42 U.S.C. 7671, ).(42) (MAY 2024) et seq.

52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (42 U.S.C. 7671, (43) (MAY 2024) et seq.

52.223-20, Aerosols (42 U.S.C. 7671, ).(44) (MAY 2024) et seq.

52.223-21, Foams (42 U.S.C. 7671, ).(45) (MAY 2024) et seq.

52.223-23, Sustainable Products and Services (MAR 2025) (DEVIATION 2025-O0004)) (7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, (46) and 42 U.S.C. 7671l).

(47)

52.224-3 Privacy Training (5 U.S.C. 552 a).(i) (JAN 2017)

Alternate I of 52.224-3.(ii) (JAN 2017)

(48)

52.225-1, Buy American-Supplies (41 U.S.C. chapter 83).(i) (OCT 2022)

Alternate I of 52.225-1.(ii) (OCT 2022)

(49)

52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, (i) (NOV 2023)

19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

Alternate I [Reserved].(ii)

Alternate II of 52.225-3.(iii) (JAN 2025)

Alternate III of 52.225-3.(iv) (FEB 2024)

Alternate IV (Oct 2022) of 52.225-3.(v)

52.225-5, Trade Agreements (19 U.S.C. 2501, ., 19 U.S.C. 3301 note).(50) (NOV 2023) et seq

52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and statutes administered by the Office of Foreign (51) (FEB 2021) Assets Control of the Department of the Treasury).

52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the (52) National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).(53)

52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (42 U.S.C. 5150).(54) (NOV 2007)

52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (E.O. 13513).(55) (MAY 2024)

52.229-12, Tax on Certain Foreign Procurements .(56) (FEB 2021)

52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. (57) (NOV 2021) 3805).

52.232-30, Installment Payments for Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. 3805).(58) (NOV 2021)

52.232-33, Payment by Electronic Funds Transfer-System for Award Management (31 U.S.C. 3332).(59) (OCT2018)

52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).(60)

52.232-36, Payment by Third Party (31 U.S.C. 3332).(61) (MAY 2014)

52.239-1, Privacy or Security Safeguards (5 U.S.C. 552a).(62) (AUG 1996)

52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign (63) Entities (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).(NOV 2024)

52.242-5, Payments to Small Business Subcontractors (15 U.S.C. 637(d)(13)).(64) (JAN 2017)

(65)

52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (46 U.S.C. 55305 and 10 U.S.C. 2631).(i) (NOV 2021)

Alternate I of 52.247-64.(ii) (APR 2003)

Alternate II of 52.247-64.(iii) (NOV 2021)

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ ]Contracting Officer check as appropriate.

52.222-41, Service Contract Labor Standards (41 U.S.C. chapter67).(1) (AUG 2018)

52.222-42, Statement of Equivalent Rates for Federal Hires (29 U.S.C. 206 and 41 U.S.C. chapter 67).(2) (MAY 2014)

52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (3) (AUG (29 U.S.C. 206 and 41 U.S.C. chapter 67).2018)

52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.(4) C. chapter 67).

52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of (5) Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (6) (MAY 2014) (41 U.S.C. chapter 67).

52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 .(7) (JAN 2022)

52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706).(8) (JAN 2022)

52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).(9)

52.247-69, Reporting Requirement for U.S.-Flag Air Carriers Regarding Training to Prevent Human Trafficking (49 U.S.C. (10) (JAN 2025) 40118(g)).

(d) . The Contractor shall comply with the provisions of this paragraph (d) if this contract was Comptroller General Examination of Record awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)

Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any (1)

FAR clause, other than those in this paragraph (e)(1), in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509).(NOV 2021)

(ii) 52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712).(NOV 2023)

(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (DEC (Section 1634 of Pub. L. 115-91).2023)

(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section (NOV 2021) 889(a)(1)(A) of Pub. L. 115-232).

(vi) 52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328).(JUN 2023)

(vii)

52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub. L. 115-390, title II).(A) (DEC 2023)

(B) Alternate I of 52.204-30.(DEC 2023)

(viii) 52.219-8, Utilization of Small Business Concerns (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further ( )JAN 2025 subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(ix) [Reserved]

(x) [Reserved]

(xi) 52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212).(JUN 2020)

(xii) 52.222-36, Equal Opportunity for Workers with Disabilities (29 U.S.C. 793).(JUN 2020)

(xiii) 52.222-37, Employment Reports on Veterans (38 U.S.C. 4212).(JUN 2020)

(xiv) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496). Flow down required in (DEC 2010) accordance with paragraph (f) of FAR clause 52.222-40.

(xv) 52.222-41, Service Contract Labor Standards (41 U.S.C. chapter 67).(AUG 2018)

(xvi)

52.222-50, Combating Trafficking in Persons (22 U.S.C. chapter 78 and E.O 13627).(A) (NOV 2021)

(B) Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(MAR 2015)

(xvii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

(xviii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (MAY (41 U.S.C. chapter 67).2014)

(xix) 52.222-54, Employment Eligibility Verification (E.O. 12989).(JAN 2025)

(xx) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 .(JAN 2022)

(xxi) 52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706).(JAN 2022)

(xxii)

52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).(A)

(B) Alternate I of 52.224-3.(JAN 2017)

(xxiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Section 862, as amended, of the (OCT 2016) National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(xxiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (42 U.S.C. 1792). Flow down required in accordance (JUN 2020) with paragraph (e) of FAR clause 52.226-6.

(xxv) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.

(xxvi) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).(NOV 2024)

(xxvii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (46 U.S.C. 55305 and 10 U.S.C. 2631). Flow (NOV 2021) down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.217-8 Option to Extend Services. (Nov 1999)

Option to Extend Services (Nov 1999)

The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within .1-Day

(End of clause)

52.217-9 Option to Extend the Term of the Contract. (Mar 2000)

Option to Extend the Term of the Contract (Mar 2000)

(a) The Government may extend the term of this contract by written notice to the Contractor within ; provided that the Government gives the 3 Days Contractor a preliminary written notice of its intent to extend at least before the contract expires. The preliminary notice does not commit the 10 Days Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed .1 Year

(End of clause)

Additional Regulation or Supplemental Clauses Incorporated by Full Text

C-227-H006 DATA REQUIREMENTS (NAVSEA) (OCT 2018) (Oct 2018)

The data to be furnished hereunder shall be prepared in accordance with the Contract Data Requirements List, DD Form 1423, Exhibit(s) A001, attached hereto.

(End of Text)

E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) (Oct 2018)

Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423.

(End of Text)

G-242-H001 GOVERNMENT CONTRACTADMINISTRATION POINTS-OF-CONTACT AND

RESPONSIBILITIES (NAVSEA) (OCT 2023)

(Oct 2023)

G-242-H001 GOVERNMENT CONTRACT ADMINISTRATION POINTS-OF-CONTACT AND RESPONSIBILITIES (NAVSEA) (OCT 2018)

(a) The Government reserves the right to administratively substitute any of the points of contact listed below at any time.

(b) The contracting officer is the only person authorized to change this contract, or orders issued thereunder. The Contractor shall not comply with any order, direction or request of Government personnel - that would constitute a change - unless it is issued in writing and signed by the Contracting Officer or is pursuant to specific authority otherwise included as part of this contract. If, in the opinion of the contractor, an effort outside the existing scope of this contract is requested, the contractor shall promptly comply with the Notification of Changes clause of this contract.

(c) The points of contact are as follows:

(i) The Procuring Contracting Officer (PCO) is:

Name: Barbaraann K Witz Address: 904 Corporate Lane, Chesapeake, VA 23220 Phone: (757) 402-1409 E-mail: barbaraann.k.witz.civ@us.navy.mil

(ii) The Contract Specialist is:

Name: Michael S Brodie Address: 904 Corporate Lane, Chesapeake, VA 23220 Phone: (757) 600-8579 E-mail: michael.s.brodie7.civ@us.navy.mil

(d) The Technical Point of Contact (TPOC) is the contracting officer’s representative for technical matters when a COR is not appointed. The TPOC is responsible for technical issues of contract administration, such as providing all items of Government Furnished Information (GFI), Government Furnished Material (GFM) and Government Furnished Equipment (GFE) if specified in the contract as well as the inspection and acceptance of all contract deliverables.

The Technical Point of Contact (TPOC) is:

Name: TBD At Contract Award

Phone:

E-mail:

(End of text)

List of Contract Documents, Exhibits, or Attachments

Attachments:

Number Attachment Name Attachment Description Reference Identifier

Date

A001 DD Form 1423 Peening

Contract Data Requirements List (CDRL) 19 Mar

Performance Work Statement (PWS)

Performance Work Statement 19 Mar

A001 DI-MGMT-

81911 Work Manag Plan

Data item submittals under CDRLS, not elsewhere listed

19 Mar

05 GFP List 19 Mar

Solicitation Provisions

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7005 Representation Relating to Compensation of Former DoD Officials. Sep 2022 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls. Oct 2016 252.204-7024 Notice on the Use of the Supplier Performance Risk System. Mar 2023 252.225-7055 Representation Regarding Business Operations with the Maduro Regime. May 2022

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region- Representation.

Jun 2023

FAR Clauses Incorporated by Full Text

52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.

(Nov 2021)

REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT

(NOV 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services- Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Products or Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) As used in this provision-Definitions.

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

.(b) Prohibition

Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an (1) executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to-

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to-

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for Procedures.

entities excluded from receiving federal awards for "covered telecommunications equipment or services".

(d) The Offeror represents that-Representation.

(1) It will, will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that-

It does, does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) (1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment-

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services-

(A) If the service is related to item maintenance: A description of all covered telecommunications…