CERTIFICATE OF COMPLIANCE.pdf

E-246-W002 CERTIFICATE OF COMPLIANCE (NAVSEA) (OCT 2018)

(a) A certification of material shall be provided by the Contractor, one (1) copy to accompany the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.

(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following:

This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.

(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.

(d) The certificate shall read as follows:

I certify that on ______ [insert date], the ____ [insert Contractor’s name] furnished the supplies called for by the Order/Contract No._____ via ____ [Carrier] on ________ [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.

Date of Execution: ________________________________ Signature: _______________________________________ Typed Name: ____________________________________ Title: ___________________________________________

CERTIFICATE OF COMPLIANCE

SOLICITATION # N4215826QE028

COMPANY NAME

MATERIAL IDENTIFICATION (COMPLETE APPLICABLE ITEMS)

CONTRACT NO. ____________________ ORDER NO ___________

ITEM NO. _______________________

NATIONAL/LOCAL STOCK NUMBER NSN/LSN ________________________

MANUFACTURER’S PART NO. ____________________________

MANUFACTURER’S SERIAL NO. __________________________

DRAWING AND PIECE NO. ______________________________

MANUFACTURER’S LOT/HEAT NOS. AS MARKED ON THE MATERIAL:

I ATTEST ALL ITEMS FURNISHED ON THIS CONTRACT ARE IN FULL COMPLIANCE WITH

ALL CONTRACT REQUIREMENTS.

SIGNATURE _________________________________ DATE _______

QUALITY ASSURANCE OFFICIAL

TITLE _________________________________

THE INSPECTION AND TEST REPORTS (AS APPLICABLE) PROVIDED REPRESENT THE

ACTUAL ATTRIBUTES OF THE ITEMS FURNISHED ON THIS CONTRACT AND INDICATE FULL

COMPLIANCE WITH ALL CONTRACT REQUIREMENTS.

REQ’D N/A

[ ] [ X ]

SIGNATURE _________________________________ DATE _________

QUALITY ASSURANCE OFFICIAL

TITLE ________________________________

“NOTE”: WHEN ITEM(S) HAVE BEEN SHIPPED, PLEASE COMPLETE CERTIFICATION(S) AND

RETURN. THIS WILL EXPEDITE RECEIPT AND PAYMENT.

MAIL TO:

NORFOLK NAVAL SHIPYARD

ATTN: CODE 2305.6, EXPEDITING SECTION

BLDG. 297

PORTSMOUTH, VA 23709-5000

DELIVER ONE (1) COPY WITH MATERIAL

ENCLOSURE (1)