CDRL_A002.pdf
PDF 239 KB Posted
- Attached to
- Traverse Servo Amplifier Assembly Federal contract opportunity
- Solicitation number
- FA820625Q0109
About this file
This is a Contract Data Requirements List (CDRL) Form DD 1423-1 for data item A002, which requires a First Article Test/Inspection Procedures and Report (FAT/IPR) for a Traverse Servo Amplifier Assembly contract (FD20202500109-00).
The contractor must deliver the FAT/IPR within 45 calendar days after the test and inspection event, with the government having 90 calendar days for review and comments. The final copy is due within 14 calendar days of receiving government comments. The report must demonstrate that the item meets requirements in drawings 3201125020 (Servo Amplifier Assembly - Traverse) and 33307-90114 (Servo Amplifier - Traverse), including engineering orders and parts lists. The report requires specific formatting, including listing all dimensions and tolerances with corresponding inspection readings in separate columns, and certification of material processing and finish requirements. The document is marked Distribution Statement D (limited to DoD and DoD contractors) and requires submission in both PDF and native format (Excel or Word) to specified Air Force personnel at the 414 SCMS/GUEA office.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA8206-25-Q-0109.pdf | ||
| FOREIGN_DISCLOSURE.pdf | ||
| CDRL_A001.pdf | ||
| IUID.pdf | ||
| FA_REPORT_260.pdf | ||
| EDL_REPORT.pdf | ||
| _BIDSET_REPORT.pdf | ||
| PKGRQMT_REPORT_158.pdf | ||
| PACKAGING SOW.pdf | ||
| ITMDESC_REPORT.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 1423-1, FEB 2001
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
PREVIOUS EDITION MAY BE USED.
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP ________ TM _______ OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE
4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
7. DD 250 REQ
8. APP CODE
9. DIST STATEMENT
REQUIRED
10. FREQUENCY
11. AS OF DATE
12. DATE OF FIRST SUBMISSION
13. DATE OF SUBSEQUENT
SUBMISSION
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
Draft Final
Reg Repro
15. TOTAL
16. REMARKS
17. PRICE GROUP
18. ESTIMATED
TOTAL PRICE
G. PREPARED BY H. DATE I. APPROVED BY J. DATE
Page of Pages
X
NSN: 5996-01-462-3656AH FD20202500109-00
A002 First Article Test/Inspection Procedures and Report (FAT/IPR)
DI-NDTI-82326 414 SCMS/GUEA
DD
A D
ONE/R
N/A
Block 16
Block 16 Block 16 1 1
1 1 0
Changes to addressees, when necessary, shall be made by letter through the CO/ACO without further revision to this CDRL.
This CDRL is for 3201125020 (Altered Item Drawing) and 33307-90114 (Vendor Item Drawing).
BLOCK 4:
Test report shall show the item meets requirements in drawings 3201125020 (Servo Amplifier Assembly - Traverse) and 33307-90114 (Servo Amplifier - Traverse), including applicable engineering orders (EOs) and parts lists.
The following items are added to the requirements of DI-NDTI-82326, Section 3.12:
(c) All dimensions and tolerances specified in the drawings shall be listed in one column, with the actual corresponding reading obtained from the inspection of the part listed in another column.
(d) Material processing and finish requirements utilized in the manufacture of "First Article" item shall be identified and certified as conforming to applicable requirements.
BLOCK 9:
Report shall be marked with the following statement on the cover page:
DISTRIBUTION STATEMENT D: Distribution authorized to Department of Defense and U.S. DoD contractors only, Administrative or Operational Use & Export Controlled:
[specify date]. Other requests for this document shall be referred to AFNWC/NMSM.
WARNING: This document contains technical data whose export is restricted by Federal Law. Dissemination of this document is controlled under DoD Directive 5230.25.
DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.
BLOCKS 10, 11, 12, & 13:
The contractor shall deliver the FAT/IPR NLT 45 calendar days after the test and inspection event. The government shall have 90 calendar days to review and provide comments. The contractor shall deliver the final copy NLT 14 calendar days following the receipt of government comments.
Continued on page 2.
NSP
0.00
ARMENDARIZ.ALFREDO.15375
50470
Digitally signed by
ARMENDARIZ.ALFREDO.1537550470
Date: 2024.11.07 08:50:26 -07'00'
07-Nov-2024 ELLINGTON.ERIC.A.102845
Digitally signed by
ELLINGTON.ERIC.A.1028455433
Date: 2024.11.07 13:43:33 -07'00'
7 Nov 2024
1 2 Adobe Professional 8.0
A
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP ________ TM _______ OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
16. REMARKS (Continued)
DD FORM 1423-1, FEB 2001 Page of Pages
X
NSN: 5996-01-462-3656AH FD20202500109-00
BLOCK 14:
Document submission shall be delivered in PDF and native format (Excel or Word) via email. Email submission shall be made to the following persons:
Alfredo Armendáriz - Mechanical Engineer, 414 SCMS - alfredo.armendariz.1@us.af.mil Eric Ellington - Logistics Management Specialist, 414 SCMS - eric.ellington.2@us.af.mil
2 2
A
File details come from the government source that posted it. Updated .