Carpet Tile_and accessories Spec.pdf
PDF 78 KB Posted
- Attached to
- Commercial Flooring Materials Furnish & Deliver
- Solicitation number
- 64648
- Issued by
- Goochland County, Virginia
About this file
This document contains the technical specifications for tile carpeting for a construction project at the Beaumont Correctional Center in Virginia. The project is being managed by the Virginia Department of Corrections and has the state project code 799-B1799-010. The specifications detail the requirements for the carpet tile products, including size, thickness, color, fiber content, flammability ratings, and installation methods. The project also includes the procurement of associated accessories such as subfloor filler, edge strips, and adhesives.
The related state and local contract opportunity is for the furnish and delivery of commercial flooring materials, including the carpet tile products specified, to Goochland County, Virginia. This is a single-award contract, with the purpose of obtaining quotes from bidders to select a responsive and responsible contractor to provide the required materials.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Resilient Flooring_and accessories-VCT Spec.pdf | ||
| Porcelian Tile_and accessories Spec.pdf | ||
| Flooring BID DOC.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Copeland Building Renovations - Beaumont Correctional Center Virginia Department of Corrections - Beaumont, Virginia
State Project Code: 799-B1799-010
Tile Carpeting 096813 - 1
SECTION 096813
TILE CARPETING
PART 1 GENERAL
1.01 SUBMITTALS
A. See Section 013000 - Administrative Requirements, for submittal procedures.
B. Product Data: Provide data on specified products, describing physical and performance characteristics; sizes, patterns, colors available, and method of installation.
C. Samples: Submit two carpet tiles illustrating color and pattern design for each carpet color selected.
D. Manufacturer's Installation Instructions: Indicate special procedures and perimeter conditions requiring special attention .
E. Installer's Qualification Statement.
F. Maintenance Data: Include maintenance procedures, recommended maintenance materials, and suggested schedule for cleaning.
1.02 FIELD CONDITIONS
A. Store materials in area of installation for minimum period of 24 hours prior to installation.
PART 2 PRODUCTS
2.01 MANUFACTURERS
A. Tile Carpeting:
1. Mannington Commercial.
2. Interface, Inc.
3. Milliken & Company.
4. Bentley Mills
5. Substitutions: See Section 016000 - Product Requirements.
2.02 MATERIALS
A. Tile Carpeting: Tufted, manufactured in one color dye lot.
1. Carpet Tile - C-Tile-A
a. Product: Cryptogram manufactured by Mannington Commercial .
b. Tile Size: 18 inches by 36 inches inch , nominal.
c. Thickness: .091 inch .
d. Color: As selected by Architect from manufacturers full range. .
e. Fiber Content: Antron Lumena Type 6,6 Nylon
f. Critical Radiant Flux: Minimum of 0.45 watts/sq cm, when tested in accordance with
ASTM E648 or NFPA 253.
g. Surface Flammability Ignition: Pass ASTM D2859 (the "pill test").
h. Gauge: 5/64 inch .
i. Stitches: 10.17 per inch .
j. Primary Backing Material: Infinity 2 Modular .
k. Total Weight: 18 oz/sq yd.
2. Carpet Tile - C-Tile-B
Jonathan Pence Cross-Out
Jonathan Pence Cross-Out
State Project Code: 799-B1799-010
Tile Carpeting 096813 - 2
a. Product: Ruffian II manufactured by Mannington Commercial .
b. Tile Size: 24 inches by 24 inches inch , nominal.
c. Thickness: .155 inch .
d. Color: As selected by Architect from manufacturers full range. .
e. Fiber Content: Type 6,6 Nylon
f. Critical Radiant Flux: Minimum of 0.45 watts/sq cm, when tested in accordance with
ASTM E648 or NFPA 253.
g. Gauge: 5/32 inch .
h. Stitches: 9 per inch .
2.03 ACCESSORIES
A. Subfloor Filler: Type recommended by flooring material manufacturer.
B. Edge Strips: Embossed aluminum , color as selected by Architect .
C. Adhesives:
1. Compatible with materials being adhered; maximum VOC content of 50 g/L; CRI (GLP) certified; in lieu of labeled product, independent test report showing compliance is acceptable.
D. Carpet Tile Adhesive: Recommended by carpet tile manufacturer; releasable type.
PART 3 EXECUTION
3.01 EXAMINATION
A. Verify that subfloor surfaces are smooth and flat within tolerances specified for that type of work and are ready to receive carpet tile.
B. Verify that wall surfaces are smooth and flat within the tolerances specified for that type of work, are dust-free, and are ready to receive carpet tile.
C. Verify that subfloor surfaces are dust-free and free of substances that could impair bonding of adhesive materials to subfloor surfaces.
3.02 PREPARATION
A. Remove existing carpet tile.
B. Prepare floor substrates as recommended by flooring and adhesive manufacturers.
C. Remove subfloor ridges and bumps. Fill minor or local low spots, cracks, joints, holes, and other defects with subfloor filler.
D. Apply, trowel, and float filler to achieve smooth, flat, hard surface. Prohibit traffic until filler is cured.
E. Vacuum clean substrate.
3.03 INSTALLATION
A. Starting installation constitutes acceptance of subfloor conditions.
B. Install carpet tile in accordance with manufacturer's instructions.
C. Blend carpet from different cartons to ensure minimal variation in color match.
D. Cut carpet tile clean. Fit carpet tight to intersection with vertical surfaces without gaps.
E. Lay carpet tile in Monolithic Vertical Ashlar pattern, with pile direction parallel to next unit, set parallel to building lines .
State Project Code: 799-B1799-010
Tile Carpeting 096813 - 3
F. Fully adhere carpet tile to substrate.
G. Trim carpet tile neatly at walls and around interruptions.
H. Complete installation of edge strips, concealing exposed edges.
3.04 CLEANING
A. Remove excess adhesive without damage, from floor, base, and wall surfaces.
B. Clean and vacuum carpet surfaces.
END OF SECTION
File details come from the government source that posted it. Updated .