C12_Att_01_-_Material_Equipment_In_Place_List.xlsx

XLSX spreadsheet 24 KB Posted

Attached to
Bldg 81 Repair Awning Federal contract opportunity
Solicitation number
N0025325Q0013
Issued by
Department of the Navy Naval Sea Systems Command

About this file

Written by GovTribe AI ·

The file is an Excel spreadsheet (C12_Att_01_-_Material_Equipment_In_Place_List.xlsx) detailing installed equipment for a naval facility project. The document lists specific equipment and materials, including two breathing air filters from Atlas Copco (model FTX345BU) and carpet installation in rooms 116, 117, and 118, with associated details such as asset numbers, quantities, replacement costs, manufacturers, serial numbers, and installation dates.

This equipment list corresponds to the Naval Undersea Warfare Center Division (NUWC) Keyport solicitation (N0025325Q0013) for Building 81 awning repair. The project involves removing and replacing a 100' existing awning with two smaller awnings, removing old piping/conduit, installing new conduit and exterior lighting, and repairing penetrations. The solicitation is 100% set aside for small businesses, with a government estimate between $35,000 and $75,000, targeting a contract award on September 3, 2025, using Low Price Technically Acceptable evaluation factors.

View the file

Other files for this federal contract opportunity

Other files attached to Bldg 81 Repair Awning, newest first.
File Type Posted
CUI Bldg. 81 Repair Awning Photos.pdf PDF
C11B_Att_02_WD_WA20250109_20250627.pdf PDF
N0025325Q0013-00001.docx DOCX document
C12_Att_09_PPI_Form.docx DOCX document
25Q0013_Bldg81_RFQ.pdf PDF
C11B_Att_02_WD_WA20250109_20250307.pdf PDF
C12_Att_05_OPSEC_Guide_for_Defense_Contractors.pdf PDF
C12_Att_06_Schedule_of_Values.xlsx XLSX spreadsheet
C11d_Att_07_Past_Performance_References.docx DOCX document
C12_Att_08_Bid_Form.xlsx XLSX spreadsheet
C12_Att_03_Safety_Requirements_for_Contractors_and_Subcontractors.pdf PDF
C12_Att_04_Kpt_EV_Guide_for_Contractors_Jan_2025.pdf PDF
C12_Att_10_Safety_Data_Sheet.docx DOCX document
C12_Att_11_OSHA_Calculating_Injury_and_Illness_Incident_Rate.pdf PDF
Show all 14

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Installed Equipment

Contract No:
Project Title:Bldg. 81 Repair Awning
Asset NumberDescriptionLong DescriptionBuilding No.Room No.Asset QtyUOMReplacement CostSupplier/VendorManufactureModel No.Serial No.Manufacture Warranty Expiration DateInstallation DateEquipment Removed
New Asset Number
(Note 4)Description of Equipment or materials Installed
(Note 3)Additional Relevant Information (e.g. size, capacity, limits, etc…)Building #Room Number of installed equipmentQuantity
(Note 1)Standard Unit of Measure for asset installedCost (material and labor to remove (if applicable) and install asset
(Note 2)Name/Address/Email/
Phone NumberManufacturerModel number of installed equipmentSerial number of installed equipmentMM/DD/YYYY
(Where no Manufacture Warranty use Contract Warranty Date)MM/DD/YYYY
Asset Number of removed asset

(if no label present on asset this column is Not Applicable) (Note 3)

Notes:
1. When installing assets with a unit of issue of "EACH", there must be a separate line item for each asset.
2. Costing data is to include the cost (labor and material) of removing the old asset and installing the new asset.
3. Enter equipment installed in column B and equipment removed in column O.
4. This column is not necessary for the final submittal from the contrator. FMS will create asset number when they receive the spreadsheet from the government.

Example

Contract No:NXXXXX-21-C-XXXX
Project Title:Replace Breathing Air Filters and Install Carpet
Asset NumberDescriptionLong DescriptionBuilding No.Room No.Asset QtyUOMReplacement CostSupplier/VendorManufactureModel No.Serial No.Manufacture Warranty Expiration DateInstallation DateEquipment Removed
New Asset Number
(Note 4)Description of Equipment or materials Installed
(Note 3)Additional Relevant Information (e.g. size, capacity, limits, etc…)Building #Room Number of installed equipmentQuantity
(Note 1)Standard Unit of Measure for asset installedCost (material and labor to remove (if applicable) and install asset
(Note 2)Name/Address/Email/
Phone NumberManufacturerModel number of installed equipmentSerial number of installed equipmentMM/DD/YYYY
(Where no Manufacture Warranty use Contract Warranty Date)MM/DD/YYYY
Asset Number of removed asset

(if no label present on asset this column is Not Applicable) (Note 3)

Breathing Air Filterlocated behind cabinet next to AHU-1 op switch50941011EA$2,400.00Atlas - 1234 Street Way, America WA 98383 atlas@msn.com/
360-123-4567Atlas CopcoFTX345BUSTB00043563/12/213/12/175094-0-101-154A-40-1H
Breathing Air Filterlocated behind cabinet next to AHU-1 op switch50941011EA$2,400.00Atlas - 1234 Street Way, America WA 98383 atlas@msn.com/
360-123-4567Atlas CopcoFTX345BUSTB00043573/12/213/12/175094-0-101-154A-40-1J
CARPET5094116, 117, 118300SQFT$4,200.00Carpets - 156 Lumber Way,

Bert WA 98317 carpets@msn.com

360-266-0154MohawkMOHAWH - STRBUN/A3/21/193/12/17N/A
Notes:
1. When installing assets with a unit of issue of "EACH", there must be a separate line item for each asset.
2. Costing data is to include the cost (labor and material) of removing the old asset and installing the new asset.
3. Enter equipment installed in column B and equipment removed in column O.
4. This column is not necessary for the final submittal from the contrator. FMS will create asset number when they receive the spreadsheet from the government.

File details come from the government source that posted it. Updated .