C07 - Description and QTY.pdf
PDF 347 KB Posted
- Solicitation number
- N61331-26-Q-JK19
About this file
This document is a Statement of Objectives describing supplies required to meet an agency's needs for MYCO Brand trailers.
The solicitation requires two (2) MG40XXXHTR hot dipped galvanized triple axle trailers with 5th wheel fixed frames and a gross vehicle weight rating of 37,000 lbs. Each trailer features a welded steel channel frame, three 10,000 lb. Dexter brand straight axles with slipper spring suspension, seven 17.5 x 6.75" HC forged aluminum wheels with 235/75R17.5 load range J radial tires, and hydraulic disc brakes with air/hydraulic actuation and emergency break-away application. Additional components include a 50,000 lb. two-speed landing gear, 5,000 lb. electric winch with cable, 12V Group 31 battery, two aluminum tool/storage boxes, aluminum wheel fenders and ladder, and a bunk hull support system with pressure-treated wood and UHMW-PE skids. The trailers are equipped with submersible waterproof LED lights compatible with 12V and 24V systems, J560 7-pin and MS75021 military 12-pin electrical connectors, eight pivoting D-ring tie-down provisions rated at 10,000 lbs. with destructive test certificates, lifting provisions rated at 10,000 lbs. each with factor of safety five, and eight nylon ratchet straps with snap hooks. The trailers comply with Federal Motor Vehicle Safety Standards 49CFR393 and 49CFR571, support internal air transport (IAT) with C-17 and C-5 aircraft compatibility including 16° rearward approach angle limits and 2.5" clearance above C-17 ramp hinge, accommodate RORO maritime ramp clearance with 16° approach/exit angles, and enable ramp launch/recovery on maximum 15° double crest and 11° single crest boat ramps. Deliverables include operators manuals, data plates with center of gravity and weight information per A-A-5027, and compliance with Naval Sea Systems Command drawing 8664033 Rev A. Quotations must include an Authorized Resellers letter from MYCO Brand, and delivery is required to Port Hueneme, CA. A lift proof test is required prior to delivery.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| C10 - Redacted Brand Name Justification.pdf | ||
| C07 - Clauses-Supply.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A description of the supplies or services required to meet the agency’s needs. MYCO Trailer
** Authorized distributors and resellers of MYCO Brand. Provide Authorized Resellers letter with your quote
1.
Qty.: 2 Item: MG40XXXHTR, Hot dipped galvanized triple axle, 5th wheel, fixed frame.
Gross Vehicle Weight Rating: 37,000 lbs.
Gross Axle Weight Rating: 30,000 lbs.
Empty Trailer Weight: 7,850 lbs.
Maximum Vertical Hitch Load: 7,000 lbs.
Maximum Capacity: 29,150 lbs.
Craft Weight: 20,000 lbs.
Axle Load: 23,100 lbs.
Vertical Hitch Load: 4,850 lbs. (17.4% of gross load).
Keel Height: 25.5” loaded.
Additional Features:
Welded steel channel frame, 5th wheel, fixed one-piece, non-articulating. Hot dipped galvanized.
2” SAE King pin. 48.5” height above road surface and clearance for commercial semi-tractor prime movers with single or tandem drive axles.
Three (3) 10,000 lb. straight axles. Commercial duty Dexter brand. Sandblasted, epoxy primer, urethane topcoat. Slipper spring equalizing suspension w/rubber eye bushings.
5,000 lb. each. Sandblasted, epoxy primed and urethane top coated. 38” axle spacing.
30,000 lbs. axle creep capacity.
Seven (7) 17.5 x 6.75” HC forged aluminum wheels, hub piloted, 6,000 lbs. capacity each.
Seven (7) 235/75R17.5 load range J radial tires. 6005 lb. capacity each @ 125 PSI.
Hubs, 5,000 lbs. capacity, 8 on 6.5” BC, 5/8” stud, 4.77” hub piloted. Grease lubrication. Screw in polycarbonate hub cap. “Air-Tight” positive pressure bearing protection system.
Mount, Spare tire.
Brakes, all road wheels. Hydraulic disc, stainless steel calipers, pistons, safety wired guide bolts. Steel Dacromet coated steel rotors and mounting bracket. Ceramic friction pads.
Brake lines, rigid. Stainless steel with double flared ends, ½” minimum bend radius.
Brake lines, flex. Rubber hose with Kevlar cord, brass fittings, Meets SAE J1401 requirements. Each hose, time duration pressure tested.
Air/hydraulic brake actuation w/emergency break-away application. Two boosters with rubber diaphragm sealed reservoirs. Dot 5 (silicone) brake fluid.
Brake system strain relief. Automatically actuated when “Glad-hands” are disconnected from prime mover. Does not require manual bleed down of air tank.
Commercial red & blue “Glad-hand” air brake connectors.
Tool/storage boxes. Two, 6.0 cubic foot aluminum boxes, with lockable toggle latch.
Suitable for storing tools, tie down devices and lifting devices.
Winch, electric, 5,000 lbs. capacity with cable and safety snap hook. Doubling block with safety snap hook included.
Battery, winch power supply. 12V Group 31 with aluminum box. Wired for charging from prime mover J560 circuit.
Landing gear. 50,000 lbs. two speed commercial with sand shoes. 150,000 lb. static capacity.
Fenders, wheel. Aluminum 12” wide, double radius.
Ladder. Aluminum, forward side mounted, craft boarding.
Bunk hull support system. 3-pair longitudinal, pressure treated wood with ½” thick
UHMW-PE skids. 2” x 12” inner, 2” x 8” mid and 2” x 6” outer pairs. Self-centering, non-adjustable, hull contouring. Forward and aft sling lift openings. All stainless-steel fasteners, through bolted.
Bow stop, “Y” style with two grey rubber “D” blocks.
Electrical system. Submersible waterproof LED lights, 10-30V DC suitable for 12V and
24V prime mover connection. Groundless wiring without ring terminals. All connections, heat shrink insulation with heat activated sealant.
Electrical connectors. One J560 7-pin 12V commercial receptacle and one MS75021 military 12-pin 28V receptacle with door. Inter-vehicular cables not included.
Reflective 2” red/white conspicuity tape.
Lifting Provisions. Four (4) “Trailer only lift” pivoting “D” ring lift rated provisions, 10,000 lbs. capacity each, factor of safety five (5), evenly located about trailer center of gravity. Meets all MIL-STD-209K, strength, sizing and labeling requirements. No “Proof Load” testing.
Lifting Provisions. Four (4) “Craft with trailer lift” pivoting “D” ring, lift rated provisions, 10,000 lbs. capacity each, factor of safety five (5). Includes destructive test sample certificate. Meets all MIL-STD-209K, strength, sizing and labeling requirements.
No “Proof Load” testing.
Lifting Devices. “Craft with trailer lift”, four (4) adjustable length turnbuckles, 10,000 lbs. lift rating capacity each, factor of safety five (5). Four (4) Sling, eyeless Type 5, 1” wide, 2-ply w/two chafe guards. 12,400 lbs. basket lift capacity with factor of safety five (5). Sewn in tag labeling WLL.
Tie Down Provisions. Eight (8) pivoting “D” ring, 10,000 lbs. capacity with factor of safety (4.6). Suitable for OTR, IAT and maritime ship transport. Includes destructive test sample certificate. Meets all MIL-STD-209K, strength, sizing and labeling requirements.
Quantity and locations, positioned to requirements of MIL-HDBK-1791, internal aerial delivery in fixed wing aircraft. MIL-STD-1366E, CONUS highway and Maritime transport.
Tie Down Devices. Eight (8), 3” wide nylon ratchet straps with safety snap hooks and chafe guards. 5,000 lbs. rating, factor of safety three (3). Sewn in tag labeling WLL.
Eight (8), eyeless Type 5, 1” wide, 2-ply w/two chafe guards. 12,400 lbs. basket capacity with factor of safety five (5). Sewn in tag labeling WLL.
Stainless steel fasteners w/locking nuts on all components, except suspension, COTS components and safety devises, requiring high strength or specialized fasteners.
Tools. Jack, 6-ton hydraulic bottle. Lug wrench, lug wrench handle.
Wheel chocks. Four (4).
Data Plates, Shipping. Attached to trailer, containing, CG, weight, axle loads, axle ratings, hitch load, hitch rating, dimensions, provision locations, capacities for conforming to A-A-5027.
Trailer complies with Federal Motor Vehicle Safety Standards 49CFR393 and 49CFR571, with use of wheel chocks as parking brakes.
IAT (internal air transport) capabilities. The craft on trailer with Commercial 6 x 4 Class 8 prime mover can be backed into C-17 and C-5 cargo aircraft without the use of approach, step-up shoring, or ground support equipment. Craft with trailer shall have a 16° rearward approach angle limit and ground clearance between trailer and prime mover axles that provides 2.5” clearance above C-17 ramp hinge.
RORO Maritime ramp clearance. Craft with trailer shall have a 16° rearward approach/exit angle limit.
Ramp launch/recovery. Craft with trailer shall have the ability to ramp launch and recover on a maximum 15° boat ramp with double crest and maximum 11° boat ramp with single crest.
Manual, operators.
Additional Requirements:
Lift Proof test.
Delivery to Port Hueneme, CA.
The Trailer shall meet or exceed the specifications detailed in Naval Sea Systems
Command drawing 8664033 Rev A.
** Authorized distributors and resellers of MYCO Brand. Provide Authorized Resellers letter with your quote
File details come from the government source that posted it. Updated .