C04c Attachment 3 Drawings 1240LT26Q0077.pdf
PDF 6 MB Posted
- Attached to
- GAOA Stock Program Fence Work Federal contract opportunity
- Solicitation number
- 1240LT26Q0077
- Issued by
- Department of Agriculture Forest Service
About this file
This is a set of construction and maintenance plans for the Custer Gallatin National Forest Admin Stock Facility Fence Improvements project, issued by the U.S. Department of Agriculture Forest Service, Northern Region. The project encompasses three admin stock facilities located in the Beartooth, Gardiner, and Yellowstone Ranger Districts across Stillwater County and Park County, Montana.
The construction project includes fence removal and replacement work at four primary locations: Deep Creek Trailhead, Deep Creek Continuous Panel Corral, Hayes McPherson, and Meyers Creek facilities. At Deep Creek Trailhead, approximately 500 linear feet of fence will be removed and replaced with wildlife-friendly smooth wire and metal posts, with two metal stock gates (18 feet and 6 feet) installed. The Deep Creek Continuous Panel facility requires construction of a 52' x 40' corral system with continuous rail panels and steel pipe posts, including three 12-foot metal gates and one 16-foot metal gate, with approximately 720 feet of existing corral removed and 1,000 feet of new continuous panel fence constructed. At Hayes McPherson, approximately 9,880 linear feet of fence will be removed and replaced with wildlife-friendly fencing across multiple pastures, with five wood pole rail gates constructed and one 16-foot metal gate installed. At Meyers Creek, approximately 14,840 linear feet of wildlife-friendly barbed wire fence and wood or metal posts will be installed, with wire gate replacements and one 12-foot metal gate option. The plans include detailed specifications for materials, post spacing, wire gauge, gate construction, and temporary fencing requirements. All materials including posts, rails, and wire must be pressure-treated, with field treatment of cuts using copper naphthenate solution. The government will provide staking for specific contract items, while the contractor is responsible for protecting and reestablishing all construction staking during the project.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| C05a RFI QA 1240LT26Q0077.docx | DOCX document | |
| C05 SF30 1240LT26Q0077-0001.pdf | ||
| C04a Attachment 1 SOW 1240LT26Q0077.pdf | ||
| C04h Attachment 8 RFI Form 1240LT26Q0077.docx | DOCX document | |
| C04f Attachment 6 Deep Creek Hayes McPhersion Facilities Map 1240LT26Q0077.pdf | ||
| C04b Attachment 2 Specifications 1240LT26Q0077.pdf | ||
| C04j Attachment 10 GENERAL FIRE SAFETY REQUIREMENTS 1240LT26Q0077.pdf | ||
| C04g Attachment 7 SOI 1240LT26Q0077.xlsx | XLSX spreadsheet | |
| C04e Attachment 5 Meyers Creek Facility Map 1240LT26Q0077.pdf | ||
| C04i Attachment 9 General Decision MT20260080 06042026.pdf | ||
| C04d Attachment 4 Drawings Signature Page 1240LT26Q0077.pdf | ||
| C04 SF1442 1240LT26Q0077.pdf |
Show all 12
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
HELENA
HARDIN
GREAT FALLS
HARDIN
MISSOULA
BILLINGS
KALISPELL
LIBBY
EUREKA
LIVINGSTON
BOZEMAN
BIG TIMBER
NO. DATEBYREVISION DESCRIPTION
SHEET NO.
SET NO.
PROJECT:
DATE:
SHEET INDEX
CONSTRUCTION PLANS
SHEET 1 TITLE
SHEET 2 DEEP CREEK TRAILHEAD FENCE SITE PLAN
SHEET 3 DEEP CREEK CONTINUOUS PANEL FENCE SITE PLAN
SHEET 4 HAYES McPHERSON FENCE SITE PLAN
SHEET 5 MEYERS CREEK FENCE SITE PLAN
SHEET 6 GENERAL NOTES & ESTIMATED QUANTITIES
SHEET 7 DEEP CREEK TRAILHEAD FENCE DETAILS
SHEET 8 DEEP CREEK CONTINUOUS PANEL FENCE DETAILS
SHEET 9 HAYES McPHERSON FENCE DETAILS
SHEET 10 HAYES McPHERSON GATE DETAILS
SHEET 11 MEYERS CREEK BARB WIRE FENCE METAL GATE DETAILS
SHEET 12 MEYERS CREEK BARB WIRE FENCE WIRE GATE DETAILS
'Date'
'Number'
CUSTER GALLATIN NATIONAL FOREST
ADMIN STOCK FACILITY FENCE IMPROVEMENTS
CONSTRUCTION / MAINTENANCE PLANS FOR
U.S. DEPARTMENT OF AGRICULTURE
FOREST SERVICE
REGION ONE
CUSTER GALLATIN NATIONAL FOREST
BEARTOOTH / GARDINER / YELLOWSTONE RANGER DISTRICTS
STILLWATER COUNTY / PARK COUNTY
AREA MAP
MONTANA INDEX MAP
PROJECT LOCATIONS
APPROVED BY:
FOREST SUPERVISOR
CUSTER GALLATIN NATIONAL FOREST
APPROVED BY:
FOREST ENGINEER
CUSTER GALLATIN NATIONAL FOREST
DISTRICT RANGER
YELLOWSTONE RANGER DISTRICT
RECOMMENDED BY:
DISTRICT RANGER
BEARTOOTH RANGER DISTRICT
RECOMMENDED BY:
RECOMMENDED BY:
DISTRICT RANGER
GARDINER RANGER DISTRICT
Meyers Creek Facility
Deep Creek Facility
Hayes McPherson Facility
Livingston
Nye
Gardiner
AutoCAD SHX Text C:\Users\AdamDeutsch\Box\01. adam.deutsch Workspace\Project Folders\25 Stock Program\Stock Facility Fence\DWG\StockAdminSite Fence.dwg
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text
NOT TO SCALE
DWG SHEET NO.
OF
SHEET
9/2 8/1
8 0 7:
M
AR
KL
F
CA
D
ST
AN
DA
RD
S\
AG
EN
CY
S
TA
ND
AR
DS
\F
OR
ES
T
SE
RV
IC
E\
NF
S-
CT
B.
DW
G;
CHECKEDDESIGNERDATE
DRAWING TITLE
'Project Name'
United States Department of Agriculture Forest Service
NO. DATEBYREVISION DESCRIPTION
NORTHERN REGION
CUSTER GALLATIN NATIONAL FOREST
ADMIN STOCK FACILITY ROAD MAINTENANCE
CUSTER GALLATIN NATIONAL FOREST
BEARTOOTH/YELLOWSTONE RANGER DISTRICT
DEEP CREEK TRAILHEAD
FENCE SITE PLAN
10 DEC 2024 ARD SLA
C-1
REMOVE AND REPLACE WITH
WILDLIFE FRIENDLY FENCE
EXISTING FENCE WEST AND NORTH
BOUNDARY LEAVE UNDISTURBED
REMOVE AND REPLACE WITH
WILDLIFE FRIENDLY FENCE
REMOVE AND REPLACE GATE
WITH 18 FOOT METAL STOCK GATE
SMOOTH WIRE W/ METAL POSTS
REMOVE AND REPLACE GATE
WITH 6 FOOT METAL STOCK GATE
WITH END BRACE
SMOOTH WIRE WITH METAL T-POSTS
WITH 2 WAY GATE LATCH
APPROX 500 FEET
LEGEND
TIE INTO EXISTING FENCE
LEAVE EXISTING FENCE
UNDISTURBED
LEAVE EXISTING FENCE
UNDISTURBED
WITH END BRACE
TIE INTO EXISTING FENCE
WOOD POST BRACES
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
E
SHEET
9/2 8/1
8 0 7:
M
AR
KL
F
CA
D
ST
AN
DA
RD
S\
AG
EN
CY
S
TA
ND
AR
DS
\F
OR
ES
T
SE
RV
IC
E\
NF
S-
CT
B.
DW
G;
CHECKEDDESIGNERDATE
DRAWING TITLE
'Project Name'
United States Department of Agriculture Forest Service
NO. DATEBYREVISION DESCRIPTION
NORTHERN REGION
CUSTER GALLATIN NATIONAL FOREST
ADMIN STOCK FACILITY ROAD MAINTENANCE
CUSTER GALLATIN NATIONAL FOREST
BEARTOOTH/YELLOWSTONE RANGER DISTRICT
DEEP CREEK CONTINUOUS
PANEL FENCE SITE PLAN
10 DEC 2024 ARD SLA
C-2
REMOVE AND REPLACE WITH
CONTINUOUS RAIL PANELS
EXISTING FENCE WEST BOUNDARY
LEAVE UNDISTURBED
CONSTRUCT CONTINUOUS PANEL
CORRAL SYSTEM FENCE
52' X 40'
INSTALL 16 FT METAL GATE
52' X 40'
52' X 40'
INSTALL 12 FT METAL GATES
12 FT METAL
GATES
TEMPORARY FENCE PROVIDE
1FT EAST OF EXISTING FENCE
CONSTRUCT CONTINUOUS PANELS
REMOVE EXISTING CORRAL
UNDISTURBED
LEAVE ROUND PEN
WEST SIDE BOUNDARY FENCE
AND INSTALL METAL STOCK
APPROX
APPROX
APPROX
52'
40'
TEMPORARY FENCE
PROVIDE 12 FOOT PANELS
WITH 6" DIA X 8' WOOD POSTS
PANELS WITH WOOD POSTS
INSTALL 12 FT METAL GATE
LEGEND
SYSTEM FENCE
LEAVE UNDISTURBED
WEST FENCE
(APPROX 1000 FEET)
(APPROX 720 FEET)
INSTALL
w/ STEEL PIPE POSTS
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
SHEET
9/2 8/1
8 0 7:
M
AR
KL
F
CA
D
ST
AN
DA
RD
S\
AG
EN
CY
S
TA
ND
AR
DS
\F
OR
ES
T
SE
RV
IC
E\
NF
S-
CT
B.
DW
G;
CHECKEDDESIGNERDATE
DRAWING TITLE
'Project Name'
United States Department of Agriculture Forest Service
NO. DATEBYREVISION DESCRIPTION
NORTHERN REGION
CUSTER GALLATIN NATIONAL FOREST
ADMIN STOCK FACILITY ROAD MAINTENANCE
CUSTER GALLATIN NATIONAL FOREST
BEARTOOTH/YELLOWSTONE RANGER DISTRICT
HAYES McPHERSON FENCE
SITE PLAN
10 DEC 2024 ARD SLA
C-3
EXISTING METAL GATES
REMOVE AND REPLACE ALL FENCE
w/WILDLIFE FRIENDLY FENCE
REHANG METAL GATE
CONSTRUCT 14'
NO WORK REQUIRED
FRIENDLY FENCE
CONSTRUCT NEW WILDLIFE
PASTURE 1
REMOVE AND REPLACE SECTION
w/WILDLIFE FRIENDLY FENCE
PASTURE 3
POLE RAIL GATE
NEW 16' METAL GATE
EXISTING FENCE
REMOVE AND REPLACE WITH
WILDLIFE FRIENDLY FENCE
FRIENDLY FENCE
CONSTRUCT NEW WILDLIFE
CROSS
CROSS FENCE 2
REMOVE AND REPLACE FENCE
w/WILDLIFE FRIENDLY FENCE
PASTURE 2
CONSTRUCT 14'
POLE RAIL GATES
PASTURE 3
388 FEET APPROX
5234 FEET APPROX
2530 FEET APPROX
1602 FEET APPROX INCLUDES X FENCE 1
OPTION 1
REMOVE AND STOCKPILE
5297 FT APPROX
EXISTING FENCE
REMOVE AND STOCKPILE
REMOVE AND REPLACE WITH
WILDLIFE FRIENDLY FENCE
OPTION 1
CONSTRUCT 14'
POLE RAIL GATES
OPTION 2
OPTION 1
FENCE 1
DESIGNATED AREAS OF
OPTION 2
PASTURE 1
PASTURE 3
PASTURE 2
PASTURE 3
PASTURE 1
PASTURE 2
PASTURE 3
BASE BID
BASE BID
BASE BID
BASE BID
BASE BID
BASE BID
BASE BID
BASE BID
BASE BID
LEGEND
EXISTING FENCE
REMOVE AND STOCKPILE
5297 FT APPROX
OPTION 2
ALL FENCE TO BE REMOVED
WILL BE STOCKPILED ON SITE
AS DESIGNATED BY CO
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
SHEET
9/2 8/1
8 0 7:
M
AR
KL
F
CA
D
ST
AN
DA
RD
S\
AG
EN
CY
S
TA
ND
AR
DS
\F
OR
ES
T
SE
RV
IC
E\
NF
S-
CT
B.
DW
G;
CHECKEDDESIGNERDATE
DRAWING TITLE
'Project Name'
United States Department of Agriculture Forest Service
NO. DATEBYREVISION DESCRIPTION
NORTHERN REGION
CUSTER GALLATIN NATIONAL FOREST
ADMIN STOCK FACILITY ROAD MAINTENANCE
CUSTER GALLATIN NATIONAL FOREST
BEARTOOTH/YELLOWSTONE RANGER DISTRICT
MEYERS CREEK FENCE SITE
PLAN
10 DEC 2024 ARD SLA
C-4
REMOVE AND REPLACE FENCE WITH
WILDLIFE FRIENDLY BARB WIRE AND
SOUTH PASTURE
REMOVE AND REPLACE FENCE WITH
START OF MAIN RUN NORTH PASTURE
REMOVE AND REPLACE FENCE WITH
WILDLIFE FRIENDLY BARB WIRE FENCE AND
REMOVE AND REPLACE FENCE WITH
WILDLIFE FRIENDLY BARB WIRE FENCE AND
NORTH PASTURE
SOUTH PASTURE
REMOVE WIRE GATE
REPLACE WIRE GATE WITH
12' METAL GATE
WOOD LINE POSTS
WILDLIFE FRIENDLY BARB WIRE AND
WOOD LINE POSTS
OPTION 1
WOOD LINE POSTS, METAL CORNER BRACE
POSTS OPTION 1
OPTION 1
BASE BID
BASE BID
POSTS BASE BID
WOOD LINE POSTS, METAL CORNER BRACE
REPLACE WIRE GATE WITH
NEW WIRE GATE
OPTION 1
WILDLIFE FRIENDLY BARB WIRE AND
REMOVE AND REPLACE FENCE WITH
END OF MAIN RUN NORTH PASTURE
WOOD LINE POSTS
BASE BID
WITH WILDLIFE FRIENDLY BARB WIRE AND
REMOVE AND REPLACE EXISTING FENCE
ALONG EDGE OF TERRAIN FEATURE
METAL LINE T-POSTS
BASE BID
NORTH PASTURE INTERMITTENT FENCE
(5 LOCATIONS, APPROX 260 FEET TOTAL)
WILDLIFE FRIENDLY BARB WIRE AND
REMOVE AND REPLACE FENCE WITH
NORTH PASTURE REMAINING FENCE
WOOD LINE POSTS
BASE BID
(APPROX 520 FEET)
(APPROX 10240 FEET FOR MAIN RUN)
HOLDING PENS NO WORK THIS CONTRACT
NORTH SOUTH HAYFIELD NO WORK THIS CONTRACT
LEGEND
(APPROX 4600 FEET)
MEYERS CREEK FACILITY
REPLACE WIRE GATE WITH
NEW WIRE GATE
BASE BID
NORTH HAY FIELD
SOUTH HAY FIELD
HOLDING PENS
NORTH PASTURE
SOUTH
PASTURE
APPROXIMATE LOCATIONS
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
SHEET
9/2 8/1
8 0 7:
M
AR
KL
F
CA
D
ST
AN
DA
RD
S\
AG
EN
CY
S
TA
ND
AR
DS
\F
OR
ES
T
SE
RV
IC
E\
NF
S-
CT
B.
DW
G;
CHECKEDDESIGNERDATE
DRAWING TITLE
'Project Name'
United States Department of Agriculture Forest Service
NO. DATEBYREVISION DESCRIPTION
NORTHERN REGION
CUSTER GALLATIN NATIONAL FOREST
ADMIN STOCK FACILITY ROAD MAINTENANCE
CUSTER GALLATIN NATIONAL FOREST
BEARTOOTH/YELLOWSTONE RANGER DISTRICT
GENERAL NOTES &
ESTIMATED QUANTITIES
10 DEC 2024 ARD SLA
GENERAL NOTES
SPECIFICATIONS:
CONSTRUCTION: MATERIALS AND EXECUTION OF THIS
CONTRACT SHALL BE IN ACCORDANCE WITH THE
SPECIFICATIONS INCLUDED IN THIS CONTRACT PACKAGE.
STAKING: THE GOVERNMENT WILL STAKE REQUIRED
CONTRACT ITEMS FOR PASTURE 3 AT THE HAYES
McPHERSON FACILITY AND CORRAL SYSTEM AT THE DEEP
CREEK FACILITY, ALL OTHER FENCE AT THESE LOCATIONS
AND FENCE AT OTHER FACILITIES WILL BE INSTALLED IN
THE EXISTING FENCE LOCATION AFTER ITS REMOVAL.. IT IS
THE CONTRACTORS RESPONSIBILITY TO PROTECT AND
REESTABLISH ALL CONSTRUCTION STAKING DURING THE
PROJECT.
HOLES IN THE GROUND LEFT FROM FENCE REMOVAL
SHALL BE FILLED IN AND COMPACTED TO PREVENT
SETTLEMENT.
ALL POSTS, POLES/RAILS, WOOD STAYS SHALL BE
PRESSURE TREATED. ANY CUTS MADE IN WOOD POSTS,
POST/RAILS ETC. SHALL BE FIELD TREATED WITH COPPER
NAPHTHENATE SOLUTION.
ALL BARBED AND BARBLESS WIRE FOR WIRE FENCE TO BE
12 1/2 GAUGE RED BRAND WIRE OR APPROVED EQUAL.
T-POSTS WILL BE 1.33 LBS/FT, FACTORY PAINTED, WITH
ANCHOR PLATE.
C-5
** INFORMATIONAL ONLY - NOT FOR BIDDING PURPOSES - REFER TO BID SCHEDULE
* ITEMS TO BE MEASURED AS CONTRACT QUANTITY (CQ) - REFER TO BID SCHEDULE
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
SHEET
9/2 8/1
8 0 7:
M
AR
KL
F
CA
D
ST
AN
DA
RD
S\
AG
EN
CY
S
TA
ND
AR
DS
\F
OR
ES
T
SE
RV
IC
E\
NF
S-
CT
B.
DW
G;
CHECKEDDESIGNERDATE
DRAWING TITLE
'Project Name'
United States Department of Agriculture Forest Service
NO. DATEBYREVISION DESCRIPTION
NORTHERN REGION
CUSTER GALLATIN NATIONAL FOREST
ADMIN STOCK FACILITY ROAD MAINTENANCE
CUSTER GALLATIN NATIONAL FOREST
BEARTOOTH/YELLOWSTONE RANGER DISTRICT
DEEP CREEK TRAILHEAD
FENCE DETAILS
10 DEC 2024 ARD SLA
D-1
12'-0"
8'-3" 8'-3"
16'-6"
10"
10"
42"
18"
18" TYP
12'-0"
54"
36" TYP
30"
60"
6" TYP
AutoCAD SHX Text 6"
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text
4" DIA BRACE MIN
AutoCAD SHX Text
BRACING
AutoCAD SHX Text
DAP BRACE INTO POST
AutoCAD SHX Text
DAP BRACE INTO POST
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text
MORTISE WIRES INTO POST
AutoCAD SHX Text
METAL STOCK GATE
AutoCAD SHX Text
STANDARD BRACE PANEL
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text
TYPE 2 OBJECT MARKER
AutoCAD SHX Text
(6"X12") EACH SIDE OF POST
AutoCAD SHX Text
ON EACH END OF GATE
AutoCAD SHX Text
FOR EACH END OF GATE AND CORNERS
AutoCAD SHX Text
GROUND LINE
AutoCAD SHX Text
MIN. 6 TIGHT WRAPS
AutoCAD SHX Text
SMOOTH WIRE FENCE
AutoCAD SHX Text
WIRE SPLICE
AutoCAD SHX Text
WIRE CLIP
AutoCAD SHX Text
FLANGE
AutoCAD SHX Text AND WILL BE EQUIPPED WITH A 2 WAY GATE LATCH SYSTEM. SEE SECTION 323120 STOCK GATE IN THE PROJECT SPECIFICATIONS.
AutoCAD SHX Text
*DRAWINGS NOT TO SCALE
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
ALL BRACE POSTS TO BE 6"-7" DIAMETER X 8'
AutoCAD SHX Text
NOTE:
AutoCAD SHX Text
SECURE WITH 3 COMPLETE
AutoCAD SHX Text
WRAPS ON END OR CORNER POSTS.
AutoCAD SHX Text
TWO STRANDS OF SMOOTH NO. 9
AutoCAD SHX Text
WIRE TWISTED TOGETHER.
AutoCAD SHX Text DEEP CREEK TRAILHEAD USE 18 FOOT WIDE METAL STOCK GATE 52 INCHES IN HEIGHT FOR ENTRANCE
AutoCAD SHX Text
ROAD, AND 6 FOOT WIDE X 52" IN HEIGHT METAL GATE FOR STOCK & HIKER ACCESS GATE.
AutoCAD SHX Text
6 FOOT STOCK AND HIKER ACCESS GATE TO INCLUDE 2 WAY GATE LATCH.
AutoCAD SHX Text
(9) ALL WIRE TO BE STRETCHED AND TENSIONED TO INDUSTRY STANDARD FOR FENCE CONSTRUCTION.
AutoCAD SHX Text
(1) STANDARD METAL STOCK GATE FOR FACILITY ENTRANCE ROAD LOCATED AT TRAILHEAD LOCATION WILL BE 18 FEET IN WIDTH, AutoCAD SHX Text
(4) STEEL POSTS SHALL BE 6 FEET LONG T-POSTS CONFORMING TO AAHSTO M 281, 1.33 POUNDS PER FOOT MINIMUM, AutoCAD SHX Text
FACTORY PAINTED, WITH ANCHOR PLATE SET AT 18" DEPTH.
AutoCAD SHX Text
(3) ALL BRACE, CORNER, AND GATE POSTS SHALL BE PRESSURE TREATED 6"-7" DIAMETER X 8' POSTS SET AT 36" DEPTH.
AutoCAD SHX Text
12 1/2 GAUGE 2 STRAND BARBLESS WIRE
AutoCAD SHX Text
SEE SPECIFICATION SECTION 323120 FOR STOCK GATE SPECIFICATIONS.
AutoCAD SHX Text
(8) SMOOTH WIRE FOR FENCE TO BE 12 1/2 GAUGE, TWO STRAND BARBLESS WIRE, RED BRAND OR APPROVED EQUAL.
AutoCAD SHX Text
(6) LIMIT FENCE RUNS TO 650 FEET BETWEEN ADJACENT CORNER BRACES, GATE BRACES, END BRACES, OR LINE BRACES.
AutoCAD SHX Text
(5) BRACE PANELS WILL BE USED ON BOTH SIDES OF ALL GATES, ALL FENCE CORNERS.
AutoCAD SHX Text
(7) SMOOTH WIRE FOR GATE CLOSURE AND BRACE PANEL TENSION WIRE TO BE 9 GAUGE ZINC-COATED WIRE.
AutoCAD SHX Text
(2) STANDARD METAL STOCK GATE FOR TRAILHEAD STOCK AND HIKER ACCESS WILL BE 6 FEET IN WIDTH, AND 52 INCHES IN HEIGHT, AutoCAD SHX Text AND 52 INCHES IN HEIGHT. SEE SECTION 323120 STOCK GATE IN THE PROJECT SPECIFICATIONS.
AutoCAD SHX Text
6' LENGTH 1.33 #/FT STEEL T-POST
AutoCAD SHX Text
SEE NOTE (4)
AutoCAD SHX Text
SEE SECTION 323160 BARBED AND BARBLESS WIRE FENCE IN THE PROJECT SPECIFICATIONS.
AutoCAD SHX Text
TWIST STICK
AutoCAD SHX Text
TREATED WOOD STAY OR
AutoCAD SHX Text
#5 REBAR 18" IN LENGTH
AutoCAD SHX Text SIDED, REFLECTORIZED, AND SECURED TO THE GATE AS SHOWN WITH GALVANIZED SMOOTH WIRE.
AutoCAD SHX Text
(11) TYPE 3 OBJECT MARKERS SHALL BE CONSTRUCTED ON A FIBERGLASS SUBSTRATE AND SHALL BE RED AND WHITE, DOUBLE
AutoCAD SHX Text
(12) ALL SIGNS AND OBJECT MARKERS REQUIRED ARE INCIDENTAL TO GATE CONSTRUCTION.
AutoCAD SHX Text
(13) ALL SIGNS AND OBJECT MARKERS SHALL MEET THE REQUIREMENTS OF THE CURRENT MANUAL ON UNIFORM TRAFFIC CONTROL DEVICES (MUTCD).
AutoCAD SHX Text
(10) ALL FIELD CUTS ON POSTS, BRACES AND POSTS SHALL BE TREATED WITH COPPER NAPTHENATE SOLUTION.
AutoCAD SHX Text (RED & WHITE 12" x 36")
AutoCAD SHX Text
TYPE 3 OBJECT MARKERS
IN LENGTH PRESSURE TREATED WOOD POSTS
SHEET
9/2 8/1
8 0 7:
M
AR
KL
F
CA
D
ST
AN
DA
RD
S\
AG
EN
CY
S
TA
ND
AR
DS
\F
OR
ES
T
SE
RV
IC
E\
NF
S-
CT
B.
DW
G;
CHECKEDDESIGNERDATE
DRAWING TITLE
'Project Name'
United States Department of Agriculture Forest Service
NO. DATEBYREVISION DESCRIPTION
NORTHERN REGION
CUSTER GALLATIN NATIONAL FOREST
ADMIN STOCK FACILITY ROAD MAINTENANCE
CUSTER GALLATIN NATIONAL FOREST
BEARTOOTH/YELLOWSTONE RANGER DISTRICT
DEEP CREEK CONTINUOUS
PANEL FENCE DETAILS
10 DEC 2024 ARD SLA
D-2
10 3/4"
58"
36" TYP 36" TYP
10'-0" 10'-0"
20'-0"
10"
60"
60" 48"
6" TYP
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text
METAL STOCK GATE
AutoCAD SHX Text
TYPE 2 OBJECT MARKER
AutoCAD SHX Text
(6"X12") EACH SIDE OF POST
AutoCAD SHX Text
ON EACH END OF GATE
AutoCAD SHX Text
GROUND LINE
AutoCAD SHX Text
CONTINUOUS PANEL FENCE
AutoCAD SHX Text
WELD CONNECTION CLIPS TO FENCE POSTS BEFORE ATTACHING CONTINUOUS RAIL PANEL
AutoCAD SHX Text WITH 10 3/4" SPACING BETWEEN RAILS.. SEE SECTION 323151 CONTINUOUS PANEL FENCE IN THE PROJECT SPECIFICATIONS.
AutoCAD SHX Text
*DRAWINGS NOT TO SCALE
AutoCAD SHX Text
GATE POSTS TO BE 4 1/2" DIAMETER X 8' IN LENGTH STEEL PIPE POSTS WITH STEEL CAPS
AutoCAD SHX Text
NOTE:
AutoCAD SHX Text DEEP CREEK FACILITY USE 12 FOOT WIDE METAL STOCK GATES 52 INCHES IN HEIGHT UNLESS OTHERWISE
AutoCAD SHX Text SHOWN IN THE PLANS. SEE SPECIFICATION SECTION 323120 FOR STOCK GATE SPECIFICATIONS.
AutoCAD SHX Text
(9) ALL SIGNS AND OBJECT MARKERS REQUIRED ARE INCIDENTAL TO GATE CONSTRUCTION.
AutoCAD SHX Text
(10) ALL SIGNS AND OBJECT MARKERS SHALL MEET THE REQUIREMENTS OF THE CURRENT MANUAL ON UNIFORM TRAFFIC CONTROL DEVICES (MUTCD).
AutoCAD SHX Text
(5) LINE POSTS SHALL BE 2 7/8" DIAMETER X 8' STEEL PIPE POSTS SET AT 36" DEPTH, AT NO MORE THAN 10 FEET SPACED INTERVAL.
AutoCAD SHX Text
AFTER POSTS ARE SET OR POSTS ARE POUNDED TO PROPER DEPTH.
AutoCAD SHX Text
(4) GATE POSTS SHALL BE 4 1/2" DIAMETER X 8' STEEL PIPE POSTS SET AT 36" DEPTH.
AutoCAD SHX Text
(7) MAXIMIZE 20 FOOT CONTINUOUS PANELS LENGTHS TO LIMIT THE NUMBER OF CUSTOM LENGTH PANELS REQUIRED.
AutoCAD SHX Text
(6) WELD PANEL CONNECTION CLIPS TO STEEL PIPE POSTS PRIOR TO CONNECTING PANEL TO POST. WELD STEEL POST CAPS ONTO POSTS
AutoCAD SHX Text
(8) POSTS SHALL BE SOLID AND PLUMB. ANY LOOSE POSTS SHALL BE REMOVED AND REINSTALLED..
AutoCAD SHX Text
(3) CONTINUOUS PANELS SHALL BE 5 RAIL WITH 1.25" THICKNESS, CONTINUOUS PANELS TO BE 48" HEIGHT X 20' LENGTH, AutoCAD SHX Text
CONTINUOUS PANELS TO BE 5 RAIL, WITH 1.25" RAIL THICKNESS, PANELS TO BE
AutoCAD SHX Text
LINE POSTS TO BE 2 7/8" DIAMETER X 8' IN LENGTH STEEL PIPE POSTS WITH STEEL CAPS
AutoCAD SHX Text
48" HEIGHT AND 20' LENGTH WITH 10 3/4 INCH SPACING BETWEEN RAILS
AutoCAD SHX Text
IN THE PROJECT SPECIFICATIONS.
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
(1) STANDARD METAL STOCK GATES FOR CORRAL SYSTEM TO BE 12 FEET IN WIDTH AND 52 INCHES IN HEIGHT, UNLESS DESIGNATED.
AutoCAD SHX Text
(2) GATES THAT ARE CONSTRUCTED WITH THE SAME MATERIALS AND MANNER AS THE CONTINUOUS PANELS MAY BE USED IN
AutoCAD SHX Text OTHERWISE IN THE PLANS, SEE SECTION 323120 STOCK GATE IN THE PROJECT SPECIFICATIONS.
AutoCAD SHX Text PLACE OF STANDARD METAL STOCK GATES IF APPROVED BY THE CO. SEE SECTION 323151 CONTINUOUS PANEL FENCE
AutoCAD SHX Text CONTINUOUS PANEL GATES MAY BE SUBSTITUTED IN PLACE OF STANDARD METAL STOCK GATES IF THE
AutoCAD SHX Text GATES ARE CONSTRUCTED WITH THE SAME MATERIALS AND MANNER AS THE CONTINUOUS PANEL FENCE
AND THE PROPOSED GATES ARE APPROVED BY THE CO.
SHEET
9/2 8/1
8 0 7:
M
AR
KL
F
CA
D
ST
AN
DA
RD
S\
AG
EN
CY
S
TA
ND
AR
DS
\F
OR
ES
T
SE
RV
IC
E\
NF
S-
CT
B.
DW
G;
CHECKEDDESIGNERDATE
DRAWING TITLE
'Project Name'
United States Department of Agriculture Forest Service
NO. DATEBYREVISION DESCRIPTION
NORTHERN REGION
CUSTER GALLATIN NATIONAL FOREST
ADMIN STOCK FACILITY ROAD MAINTENANCE
CUSTER GALLATIN NATIONAL FOREST
BEARTOOTH/YELLOWSTONE RANGER DISTRICT
HAYES McPHERSON FENCE
DETAILS
10 DEC 2024 ARD SLA
D-3
14'
10"
10"
60"
24"
16"
36" TYP
8'-3" 8'-3"
16'-6"
60"
24"
16"
14'
36" TYP
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text
SPLIT TOP RAIL & BARBLESS WIRE FENCE
AutoCAD SHX Text
MIN. 6 TIGHT WRAPS
AutoCAD SHX Text
BRACE PANEL
AutoCAD SHX Text
WIRE SPLICE
AutoCAD SHX Text
(1) STANDARD GATE WILL BE 14' WIDE (OPENING) UNLESS OTHERWISE DESIGNATED IN THE
AutoCAD SHX Text
PLANS OR SPECIFICATIONS.
AutoCAD SHX Text
*DRAWINGS NOT TO SCALE
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
SECURE WITH 3 COMPLETE
AutoCAD SHX Text
WRAPS ON END OR CORNER POSTS.
AutoCAD SHX Text
4" DIA BRACING MIN
AutoCAD SHX Text
4" DIA BRACING MIN
AutoCAD SHX Text
DAP BRACE INTO POST
AutoCAD SHX Text
DAP BRACE INTO POST
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text
MORTISE WIRES INTO POST
AutoCAD SHX Text
TWO STRANDS OF SMOOTH NO. 9
AutoCAD SHX Text
WIRE TWISTED TOGETHER.
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text
USE FOR EACH END OF GATE AND FENCE CORNERS
AutoCAD SHX Text
(2) ALL BRACE, CORNER, AND GATE POSTS SHALL BE PRESSURE TREATED 6"-7" DIAMETER X 8' POSTS SET AT 36" DEPTH.
AutoCAD SHX Text
(5) WIRE USED FOR BRACE PANEL TENSION WIRE WILL BE SMOOTH NO 9 WIRE.
AutoCAD SHX Text
12 1/2 GAUGE 2 STRAND BARBLESS WIRE
AutoCAD SHX Text
TOP RAIL TO BE 4" MIN DIA X 16' MIN LENGTH HALF ROUND RAIL
AutoCAD SHX Text
HALF ROUND RAILS.
AutoCAD SHX Text
ALL BRACE POSTS TO BE 6"-7" DIAMETER X 8' IN LENGTH
AutoCAD SHX Text
ALL LINE POSTS TO BE 5"-6" MIN DIAMETER X 8' LENGTH
AutoCAD SHX Text
AutoCAD SHX Text
(10) ALL WIRE TO BE STRETCHED AND TENSIONED TO INDUSTRY STANDARD FOR FENCE CONSTRUCTION.
AutoCAD SHX Text
(9) FENCE RUN WIRE TO BE 12 1/2 GAUGE, TWO STRAND BARBLESS WIRE, RED BRAND OR APPROVED EQUAL.
AutoCAD SHX Text
(8) SMOOTH WIRE FOR GATE CLOSURE AND BRACE PANEL TENSION WIRE TO BE 9 GAUGE ZINC-COATED WIRE.
AutoCAD SHX Text
(4) BRACE PANELS WILL BE USED ON BOTH SIDES OF ALL GATES, ALL FENCE CORNERS.
AutoCAD SHX Text
(5) LIMIT FENCE RUNS TO 650 FEET BETWEEN ADJACENT CORNER BRACES, GATE BRACES, END BRACES, OR LINE BRACES.
AutoCAD SHX Text
(3) LINE POSTS SHALL BE PRESSURE TREATED 5"-6" MIN DIAMETER X 8' POSTS SET AT 36" DEPTH.
AutoCAD SHX Text
(7) WOOD RAILS FOR GATES SHALL BE PRESSURE TREATED 4" END DIAMETER MINIMUM AND 16 FEET LENGTH MINIMUM
AutoCAD SHX Text
(6) TOP RAIL SHALL BE PRESSURE TREATED 4" END DIAMETER MINIMUM AND 16 FEET LENGTH MINIMUM, HALF ROUND RAILS, AutoCAD SHX Text TOP RAILS TO BE OVERLAPPED AND CONNECTED TO POSTS USING STRUCTURAL/CONSTRUCTION 6" LAG SCREWS.
AutoCAD SHX Text SEE SECTION 323150 POST AND POLE WITH BARBLESS WIRE FENCE IN THE PROJECT SPECIFICATIONS.
AutoCAD SHX Text
TOP RAIL SHALL BE CONNECTED TO POST UTILIZING STRUCTURAL/
AutoCAD SHX Text
CONSTRUCTION 6" MIN LENGTH LAG SCREWS.
AutoCAD SHX Text
TWIST STICK
AutoCAD SHX Text
TREATED WOOD STAY OR
AutoCAD SHX Text
#5 REBAR 18" IN LENGTH
AutoCAD SHX Text
(11) ALL FIELD CUTS ON POSTS, BRACES AND POSTS SHALL BE TREATED WITH COPPER NAPTHENATE SOLUTION.
FULL ROUND RAILS.
SHEET
9/2 8/1
8 0 7:
M
AR
KL
F
CA
D
ST
AN
DA
RD
S\
AG
EN
CY
S
TA
ND
AR
DS
\F
OR
ES
T
SE
RV
IC
E\
NF
S-
CT
B.
DW
G;
CHECKEDDESIGNERDATE
DRAWING TITLE
'Project Name'
United States Department of Agriculture Forest Service
NO. DATEBYREVISION DESCRIPTION
NORTHERN REGION
CUSTER GALLATIN NATIONAL FOREST
ADMIN STOCK FACILITY ROAD MAINTENANCE
CUSTER GALLATIN NATIONAL FOREST
BEARTOOTH/YELLOWSTONE RANGER DISTRICT
HAYES McPHERSON GATE
DETAILS
10 DEC 2024 ARD SLA
D-4
8'-3" 8'-3"
16'-6"
10"
10"
60"
24"
16"
14'
36" TYP
14'-0"
60"
48"
32"
20"
16'-0"
36" TYP
6" TYP
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text
SECURE WITH 3 COMPLETE
AutoCAD SHX Text
WRAPS ON END OR CORNER POSTS.
AutoCAD SHX Text
BRACING
AutoCAD SHX Text
4" DIA BRACING MIN
AutoCAD SHX Text
DAP BRACE INTO POST
AutoCAD SHX Text
DAP BRACE INTO POST
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text
MORTISE WIRES INTO POST
AutoCAD SHX Text
16' METAL GATE
AutoCAD SHX Text
STANDARD BRACE PANEL
AutoCAD SHX Text
TWO STRANDS OF SMOOTH NO. 9
AutoCAD SHX Text
WIRE TWISTED TOGETHER.
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text
FOR EACH END OF GATE AND CORNERS
AutoCAD SHX Text
MIN. 6 TIGHT WRAPS
AutoCAD SHX Text
WOOD POLE/RAIL GATE
AutoCAD SHX Text
WIRE SPLICE
AutoCAD SHX Text
AutoCAD SHX Text
SECURE WITH 3 COMPLETE
AutoCAD SHX Text
WRAPS ON END OR CORNER POSTS.
AutoCAD SHX Text
BRACING
AutoCAD SHX Text
BRACING
AutoCAD SHX Text
DAP BRACE INTO POST
AutoCAD SHX Text
DAP BRACE INTO POST
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text
MORTISE WIRES INTO POST
AutoCAD SHX Text
TWO STRANDS OF SMOOTH NO. 9
AutoCAD SHX Text
WIRE TWISTED TOGETHER.
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text ALL BRACE POSTS TO BE 6"-7" MIN DIAMETER x 8' LENGTH
AutoCAD SHX Text
CROSS SECTION VIEW OF GATE
AutoCAD SHX Text
GATE RAILS TO BE 4" MIN DIA X 16' MIN LENGTH FULL ROUND RAILS
AutoCAD SHX Text
DESIGNATED IN THE PLANS.
AutoCAD SHX Text
(10) ALL WIRE TO BE STRETCHED AND TENSIONED TO INDUSTRY STANDARD FOR FENCE CONSTRUCTION.
AutoCAD SHX Text
(1) STANDARD METAL STOCK GATE WILL BE 16 FEET IN WIDTH AND 52 INCHES IN HEIGHT. SEE SECTION 323120
AutoCAD SHX Text STOCK GATE IN THE PROJECT SPECIFICATIONS. WOOD RAIL GATES WILL BE 14' WIDE (OPENING) UNLESS OTHERWISE
AutoCAD SHX Text
(9) WIRE TO BE 12 1/2 GAUGE, TWO STRAND BARBLESS WIRE, RED BRAND OR APPROVED EQUAL.
AutoCAD SHX Text
TOP RAIL TO BE 4" MIN DIA X 16' MIN LENGTH HALF ROUND RAIL
AutoCAD SHX Text
PRESSURE TREATED WOOD POSTS SET AT 36" DEPTH
AutoCAD SHX Text
(8) SMOOTH WIRE FOR GATE CLOSURE AND BRACE PANEL TENSION WIRE TO BE 9 GAUGE ZINC-COATED WIRE.
AutoCAD SHX Text
ALL LINE POSTS TO BE 5"-6" MIN DIA
AutoCAD SHX Text
X 8' LENGTH PRESSURE TREATED WOOD
AutoCAD SHX Text
POSTS SET AT 36" DEPTH
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
*DRAWINGS NOT TO SCALE
AutoCAD SHX Text
(2) ALL BRACE, CORNER, AND GATE POSTS SHALL BE PRESSURE TREATED 6"-7" DIAMETER X 8' POSTS SET AT 36" DEPTH.
AutoCAD SHX Text
(4) BRACE PANELS WILL BE USED ON BOTH SIDES OF ALL GATES, ALL FENCE CORNERS.
AutoCAD SHX Text
(5) LIMIT FENCE RUNS TO 650 FEET BETWEEN ADJACENT CORNER BRACES, GATE BRACES, END BRACES, OR LINE BRACES.
AutoCAD SHX Text
(3) LINE POSTS SHALL BE PRESSURE TREATED 5"-6" MIN DIAMETER X 8' POSTS SET AT 36" DEPTH.
AutoCAD SHX Text
12 1/2 GAUGE 2 STRAND BARBLESS WIRE
AutoCAD SHX Text
TOP RAIL SHALL BE CONNECTED TO POST UTILIZING STRUCTURAL/
AutoCAD SHX Text
CONSTRUCTION 6" MIN LENGTH LAG SCREWS.
AutoCAD SHX Text ALL BRACE POSTS TO BE 6"-7" MIN DIAMETER x 8' LENGTH
AutoCAD SHX Text
PRESSURE TREATED WOOD POSTS SET AT 36" DEPTH
AutoCAD SHX Text
TWIST STICK
AutoCAD SHX Text
TREATED WOOD STAY OR
AutoCAD SHX Text
#5 REBAR 18" IN LENGTH
AutoCAD SHX Text
(12) ALL SIGNS AND OBJECT MARKERS REQUIRED ARE INCIDENTAL TO GATE CONSTRUCTION.
AutoCAD SHX Text
(13) ALL SIGNS AND OBJECT MARKERS SHALL MEET THE REQUIREMENTS OF THE CURRENT MANUAL ON UNIFORM TRAFFIC CONTROL DEVICES (MUTCD).
AutoCAD SHX Text
(11) ALL FIELD CUTS ON POSTS, BRACES AND POSTS SHALL BE TREATED WITH COPPER NAPTHENATE SOLUTION.
AutoCAD SHX Text
(6) TOP RAIL SHALL BE PRESSURE TREATED 4" END DIAMETER MINIMUM AND 16 FEET LENGTH MINIMUM, HALF ROUND RAILS, AutoCAD SHX Text TOP RAILS TO BE OVERLAPPED AND CONNECTED TO POSTS USING STRUCTURAL/CONSTRUCTION 6" LAG SCREWS.
AutoCAD SHX Text SEE SECTION 323150 POST AND POLE WITH BARBLESS WIRE FENCE IN THE PROJECT SPECIFICATIONS.
AutoCAD SHX Text
(7) WOOD RAILS FOR GATES SHALL BE PRESSURE TREATED 4" END DIAMETER MINIMUM AND 16 FEET LENGTH MINIMUM
AutoCAD SHX Text
FULL ROUND RAILS.
AutoCAD SHX Text
TYPE 2 OBJECT MARKER
AutoCAD SHX Text
(6"X12") EACH SIDE OF POST
ON EACH END OF GATE
30"
36" TYP
DWG SHEET NO.
OF
SHEET
9/2 8/1
8 0 7:
M
AR
KL
F
CA
D
ST
AN
DA
RD
S\
AG
EN
CY
S
TA
ND
AR
DS
\F
OR
ES
T
SE
RV
IC
E\
NF
S-
CT
B.
DW
G;
CHECKEDDESIGNERDATE
DRAWING TITLE
'Project Name'
United States Department of Agriculture Forest Service
NO. DATEBYREVISION DESCRIPTION
NORTHERN REGION
CUSTER GALLATIN NATIONAL FOREST
ADMIN STOCK FACILITY ROAD MAINTENANCE
CUSTER GALLATIN NATIONAL FOREST
BEARTOOTH/YELLOWSTONE RANGER DISTRICT
MEYERS CREEK BARB WIRE
FENCE METAL GATE DETAILS
10 DEC 2024 ARD SLA
D-5
8'-3" 8'-3"
16'-6"
8'-3" 8'-3"
16'-6"
8'-3" 8'-3"
16'-6"
10"
10"
42"
18"
30" TYP
54"
24"
8'-3"
60"
6" TYP
36" TYP
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text
NOTE: 12 FOOT METAL GATE 52 INCHES IN HEIGHT SEE SPECIFICATION SECTION 323120
AutoCAD SHX Text
SECURE WITH 3 COMPLETE
AutoCAD SHX Text
WRAPS ON END OR CORNER POSTS.
AutoCAD SHX Text
4" DIA BRACING MIN
AutoCAD SHX Text
BRACING
AutoCAD SHX Text
DAP BRACE INTO POST
AutoCAD SHX Text
DAP BRACE INTO POST
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text
MORTISE WIRES INTO POST
AutoCAD SHX Text
METAL STOCK GATE
AutoCAD SHX Text
STANDARD BRACE PANEL
AutoCAD SHX Text
TWO STRANDS OF SMOOTH NO. 9
AutoCAD SHX Text
WIRE TWISTED TOGETHER.
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text
TYPE 2 OBJECT MARKER
AutoCAD SHX Text
(6"X12") EACH SIDE OF POST
AutoCAD SHX Text
ON EACH END OF GATE
AutoCAD SHX Text
FOR EACH END OF GATE AND CORNER BRACE PANELS
AutoCAD SHX Text
WOOD STAY 2" MIN. DIA. OR
AutoCAD SHX Text
GROUND LINE
AutoCAD SHX Text
MIN. 6 TIGHT WRAPS
AutoCAD SHX Text
BARBED WIRE FENCE
AutoCAD SHX Text
BARBED WIRE SPLICE
AutoCAD SHX Text
1 1/2" LONG STAPLE
AutoCAD SHX Text
(TYP)
AutoCAD SHX Text
(1) STANDARD METAL STOCK GATE WILL BE 12 FEET WIDTH AND 52 INCHES IN HEIGHT SEE
AutoCAD SHX Text
SPECIFICATION SECTION 323120 FOR STOCK GATE SPECIFICATIONS.
AutoCAD SHX Text
*DRAWINGS NOT TO SCALE
AutoCAD SHX Text
BARBED WIRE
AutoCAD SHX Text
SEE NOTE (9)
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
FOR STOCK GATE SPECIFICATIONS.
AutoCAD SHX Text
WIRE STAY NO 9 WIRE
AutoCAD SHX Text
LINE POSTS TO BE PRESSURE TREATED
AutoCAD SHX Text
4" MIN DIAMETER X 7' LENGTH WOOD POSTS
AutoCAD SHX Text
SET AT 30" DEPTH
AutoCAD SHX Text
(4) WOOD STAYS WILL BE 2" MINIMUM DIAMETER, WIRE STAY WILL BE OF NO. 9 WIRE.
AutoCAD SHX Text
(5) BRACE PANELS WILL BE USED ON BOTH SIDES OF ALL GATES, ALL FENCE CORNERS.
AutoCAD SHX Text
(3) LINE POSTS SHALL BE PRESSURE TREATED 4" MIN DIAMETER X 7' WOOD POSTS SET AT 30" DEPTH.
AutoCAD SHX Text
(9) ALL WIRE TO BE STRETCHED AND TENSIONED TO INDUSTRY STANDARD FOR FENCE CONSTRUCTION.
AutoCAD SHX Text
(8) ALL BARBED-WIRE TO BE 12 1/2 GAUGE, 2-POINT, WITH BARBS 4"-5" APART, RED BRAND OR APPROVED EQUAL.
AutoCAD SHX Text
(7) SMOOTH WIRE FOR GATE CLOSURE AND BRACE PANEL TENSION WIRE TO BE 9 GAUGE ZINC-COATED WIRE.
AutoCAD SHX Text
(6) LIMIT FENCE RUNS TO 650 FEET BETWEEN ADJACENT CORNER BRACES, GATE BRACES, END BRACES, OR LINE BRACES.
AutoCAD SHX Text
SECURE WITH 3 COMPLETE
AutoCAD SHX Text
WRAPS ON END OR CORNER POSTS.
AutoCAD SHX Text
TWO STRANDS OF SMOOTH NO. 9
AutoCAD SHX Text
WIRE TWISTED TOGETHER.
AutoCAD SHX Text
LINE BRACE PANEL
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text
TWIST STICK
AutoCAD SHX Text
TREATED WOOD STAY OR
AutoCAD SHX Text
#5 REBAR 18" IN LENGTH
AutoCAD SHX Text
(11) ALL SIGNS AND OBJECT MARKERS REQUIRED ARE INCIDENTAL TO GATE CONSTRUCTION.
AutoCAD SHX Text
(12) ALL SIGNS AND OBJECT MARKERS SHALL MEET THE REQUIREMENTS OF THE CURRENT MANUAL ON UNIFORM TRAFFIC CONTROL DEVICES (MUTCD).
AutoCAD SHX Text
(10) ALL FIELD CUTS ON POSTS, BRACES AND POSTS SHALL BE TREATED WITH COPPER NAPTHENATE SOLUTION.
AutoCAD SHX Text
(2) ALL BRACE, CORNER, AND GATE POSTS SHALL BE PRESSURE TREATED 6"-7" DIAMETER X 8' POSTS SET AT 36" DEPTH.
AutoCAD SHX Text
ALL GATE, CORNER, AND LINE BRACE POSTS TO BE
AutoCAD SHX Text
6"-7" DIAMETER X 8' IN LENGTH PRESSURE TREATED
WOOD POSTS SET AT 36" DEPTH
SHEET
9/2 8/1
8 0 7:
M
AR
KL
F
CA
D
ST
AN
DA
RD
S\
AG
EN
CY
S
TA
ND
AR
DS
\F
OR
ES
T
SE
RV
IC
E\
NF
S-
CT
B.
DW
G;
CHECKEDDESIGNERDATE
DRAWING TITLE
'Project Name'
United States Department of Agriculture Forest Service
NO. DATEBYREVISION DESCRIPTION
NORTHERN REGION
CUSTER GALLATIN NATIONAL FOREST
ADMIN STOCK FACILITY ROAD MAINTENANCE
CUSTER GALLATIN NATIONAL FOREST
BEARTOOTH/YELLOWSTONE RANGER DISTRICT
MEYERS CREEK BARB WIRE
FENCE WIRE GATE DETAILS
10 DEC 2024 ARD SLA
D-6
8'-3" 8'-3"
16'-6"
8'-3" 8'-3"
16'-6"
8'-3" 8'-3"
16'-6"
10"
10"
42"
18"
24"
30" TYP
54"
30"
36" TYP
8'-3"
60"
36" TYP
AutoCAD SHX Text F
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text S
AutoCAD SHX Text T
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text V
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text P
AutoCAD SHX Text A
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text M
AutoCAD SHX Text E
AutoCAD SHX Text N
AutoCAD SHX Text T
AutoCAD SHX Text O
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text C
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text T
AutoCAD SHX Text U
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text
SECURE WITH 3 COMPLETE
AutoCAD SHX Text
WRAPS ON END OR CORNER POSTS.
AutoCAD SHX Text
4" DIA BRACING MIN
AutoCAD SHX Text
BRACING
AutoCAD SHX Text
DAP BRACE INTO POST
AutoCAD SHX Text
DAP BRACE INTO POST
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text
MORTISE WIRES INTO POST
AutoCAD SHX Text
GATE CLOSURE
AutoCAD SHX Text
CHAIN OR TWO STRANDS OF
AutoCAD SHX Text
SMOOTH, 9-GAUGE WIRE
AutoCAD SHX Text
TWISTED TOGETHER, WRAPPED
AutoCAD SHX Text
AND STAPLED TO BOTH SIDES
AutoCAD SHX Text
OF POST.
AutoCAD SHX Text
WIRE GATE
AutoCAD SHX Text
STANDARD BRACE PANEL
AutoCAD SHX Text
TWO STRANDS OF SMOOTH NO. 9
AutoCAD SHX Text
WIRE TWISTED TOGETHER.
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text
TYPE 2 OBJECT MARKER
AutoCAD SHX Text
(6"X12") EACH SIDE OF POST
AutoCAD SHX Text
ON EACH END OF GATE
AutoCAD SHX Text
FOR EACH END OF GATE AND CORNER PANELS
AutoCAD SHX Text
GROUND LINE
AutoCAD SHX Text
MIN. 6 TIGHT WRAPS
AutoCAD SHX Text
BARBED WIRE FENCE
AutoCAD SHX Text
BARBED WIRE SPLICE
AutoCAD SHX Text
1 1/2" LONG STAPLE
AutoCAD SHX Text
(1) GATES NOT IDENTIFIED IN THE PLANS TO BE REPLACED WITH METAL GATES SHALL BE REPLACED WITH WIRE GATES
AutoCAD SHX Text WITH 4 STRANDS OF BARB WIRE WITH A SPAN WIDTH THAT WILL ACCOMMODATE A 12' METAL GATE FOR FUTURE INSTALLATION.
AutoCAD SHX Text
BARBED WIRE
AutoCAD SHX Text
SEE NOTE (9)
AutoCAD SHX Text
WOOD STAY 2" MIN. DIA. OR
AutoCAD SHX Text
WIRE STAY NO 9 WIRE
AutoCAD SHX Text
*DRAWINGS NOT TO SCALE
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text NOTE: GATES NOT IDENTIFIED IN THE PLANS TO BE REPLACED WITH METAL GATES, SHALL BE REPLACED
AutoCAD SHX Text WITH WIRE GATES WITH 4 STRANDS OF BARB WIRE WITH A SPAN OPENING THAT WILL ACCOMMODATE A
AutoCAD SHX Text
WIRE GATES SHALL HAVE TWO END STAYS AND THREE STAYS EVENLY SPACED IN SPAN.
AutoCAD SHX Text
SPACING OF STAYS NOT TO EXCEED 3 FEET IN WIDER GATES.
AutoCAD SHX Text
(ANY ADDITIONAL STAYS REQUIRED MUST BE OF WIRE).
AutoCAD SHX Text
12' METAL GATE WHICH WILL BE INSTALLED AT A LATER DATE BY OTHERS.
AutoCAD SHX Text
END STAYS WILL BE 3" MIN. DIAMETER. CENTER STAYS 2" MIN DIAMETER.
AutoCAD SHX Text
LINE POSTS TO BE PRESSURE TREATED
AutoCAD SHX Text
4" MIN DIAMETER X 7' LENGTH WOOD POSTS
AutoCAD SHX Text
SET AT 30" DEPTH
AutoCAD SHX Text
ALL GATE, CORNER, AND LINE BRACE POSTS TO BE
AutoCAD SHX Text
6"-7" DIAMETER X 8' IN LENGTH PRESSURE TREATED
AutoCAD SHX Text
WOOD POSTS SET AT 36" DEPTH
AutoCAD SHX Text
SPIKE
AutoCAD SHX Text
TWIST STICK
AutoCAD SHX Text
TREATED WOOD STAY OR
AutoCAD SHX Text
#5 REBAR 18" IN LENGTH
AutoCAD SHX Text
SECURE WITH 3 COMPLETE
AutoCAD SHX Text
WRAPS ON END OR CORNER POSTS.
AutoCAD SHX Text
TWO STRANDS OF SMOOTH NO. 9
AutoCAD SHX Text
WIRE TWISTED TOGETHER.
AutoCAD SHX Text
LINE BRACE PANEL
AutoCAD SHX Text
(4) WOOD STAYS WILL BE 2" MINIMUM DIAMETER, WIRE STAY WILL BE OF NO. 9 WIRE.
AutoCAD SHX Text
(5) BRACE PANELS WILL BE USED ON BOTH SIDES OF ALL GATES, ALL FENCE CORNERS.
AutoCAD SHX Text
(3) LINE POSTS SHALL BE PRESSURE TREATED 4" MIN DIAMETER X 7' WOOD POSTS SET AT 30" DEPTH.
AutoCAD SHX Text
(9) ALL WIRE TO BE STRETCHED AND TENSIONED TO INDUSTRY STANDARD FOR FENCE CONSTRUCTION.
AutoCAD SHX Text
(8) ALL BARBED-WIRE TO BE 12 1/2 GAUGE, 2-POINT, WITH BARBS 4"-5" APART, RED BRAND OR APPROVED EQUAL.
AutoCAD SHX Text
(7) SMOOTH WIRE FOR GATE CLOSURE AND BRACE PANEL TENSION WIRE TO BE 9 GAUGE ZINC-COATED WIRE.
AutoCAD SHX Text
(6) LIMIT FENCE RUNS TO 650 FEET BETWEEN ADJACENT CORNER BRACES, GATE BRACES, END BRACES, OR LINE BRACES.
AutoCAD SHX Text SIDED, REFLECTORIZED, AND SECURED TO THE GATE AS SHOWN WITH GALVANIZED SMOOTH WIRE. A "FLEX LITE"
AutoCAD SHX Text
FLEXIBLE MARKER MAY BE SUBSTITUTED.
AutoCAD SHX Text
(12) TYPE 3 OBJECT MARKERS SHALL BE CONSTRUCTED ON A FIBERGLASS SUBSTRATE AND SHALL BE BLACK AND YELLOW, DOUBLE
AutoCAD SHX Text
(13) ALL SIGNS AND OBJECT MARKERS REQUIRED ARE INCIDENTAL TO GATE CONSTRUCTION.
AutoCAD SHX Text
(14) ALL SIGNS AND OBJECT MARKERS SHALL MEET THE REQUIREMENTS OF THE CURRENT MANUAL ON UNIFORM TRAFFIC CONTROL DEVICES (MUTCD).
AutoCAD SHX Text
(10) ALL FIELD CUTS ON POSTS, BRACES AND POSTS SHALL BE TREATED WITH COPPER NAPTHENATE SOLUTION.
AutoCAD SHX Text
(2) ALL BRACE, CORNER, AND GATE POSTS SHALL BE PRESSURE TREATED 6"-7" DIAMETER X 8' POSTS SET AT 36" DEPTH.
(11) GATE CLOSER POWDER COATED TOOL-TUFF GATE CLOSER OR APPROVED EQUAL.
| StockAdminSite Fence-TITLE.pdf |
| Sheets and Views |
| TITLE |
| Wildlife Friendly Fence |
| DEEP CREEK TRAILHEAD FENCE SITE PLAN.pdf |
| Sheets and Views |
| DEEP CREEK TRAILHEAD FENCE SITE PLAN |
| Wildlife Friendly Fence |
| DEEP CREEK CONTINUOUS PANEL FENCE SITE PLAN.pdf |
| Sheets and Views |
| DEEP CREEK CONTINUOUS PANEL FENCE SITE PLAN |
| Wildlife Friendly Fence |
| HAYES McPHERSON FENCE SITE PLAN.pdf |
| Sheets and Views |
| HAYES McPHERSON FENCE SITE PLAN |
| Wildlife Friendly Fence |
| MEYERS CREEK FENCE SITE PLAN.pdf |
| Sheets and Views |
| MEYERS CREEK FENCE SITE PLAN |
| Wildlife Friendly Fence |
| GENERAL NOTES & ESTIMATED QUANTITIES.pdf |
| Sheets and Views |
| GENERAL NOTES & ESTIMATED QUANTITIES |
| Wildlife Friendly Fence |
| DEEP CREEK TRAILHEAD FENCE DETAILS.pdf |
| Sheets and Views |
| DEEP CREEK TRAILHEAD FENCE DETAILS |
| Wildlife Friendly Fence |
| DEEP CREEK CONTINUOUS PANEL FENCE DETAILS.pdf |
| Sheets and Views |
| DEEP CREEK CONTINUOUS PANEL FENCE DETAILS |
| Wildlife Friendly Fence |
| HAYES McPHERSON FENCE DETAILS.pdf |
| Sheets and Views |
| HAYES McPHERSON FENCE DETAILS |
| Wildlife Friendly Fence |
| HAYES McPHERSON GATE DETAILS.pdf |
| Sheets and Views |
| HAYES McPHERSON GATE DETAILS |
| Wildlife Friendly Fence |
| MEYERS CREEK BARB WIRE FENCE METAL GATE DETAILS.pdf |
| Sheets and Views |
| MEYERS CREEK BARB WIRE FENCE METAL GATE DETAILS |
| Wildlife Friendly Fence |
| MEYERS CREEK BARB WIRE FENCE WIRE GATE DETAILS.pdf |
| Sheets and Views |
| MEYERS CREEK BARB WIRE FENCE WIRE GATE DETAILS |
| Wildlife Friendly Fence |
File details come from the government source that posted it. Updated .