C04_01 SOW_12444026Q0126.pdf
PDF 60 KB Posted
- Solicitation number
- 12444026Q0126
- Issued by
-
Department of Agriculture Forest Service
About this file
This is a Statement of Work (SOW) for the removal of a factory-installed pickup bed from a 2026 Chevrolet 3500 HD (Single Rear Wheel) pickup truck and installation of a replacement CM Truck Bed (Model 8'6/84/54/42). The specific vehicle is identified by VIN 1GC4KSEY1TF291258 and currently features a factory OEM bed with a backup camera.
The contractor is responsible for four primary task areas: (A) safe removal of the OEM bed including disconnection of all electrical systems, backup camera, sensors, fuel filler, and auxiliary connections without damage to the truck frame or chassis; (B) preparation of the chassis by verifying measurements and mounting compatibility, positioning wiring harnesses and fuel filler components, and providing necessary mounting hardware; (C) installation of the CM bed to manufacturer specifications including proper mounting, alignment of fuel filler neck, lighting, license plate lighting, reverse sensors, and comprehensive electrical connection and testing of brake lights, turn signals, reverse lights, and marker lights; and (D) quality assurance through full structural and electrical inspection, DOT compliance testing, and clearance verification. The deliverables are the completed OEM bed removal, fully installed CM Truck Bed, and documentation of work performed. Work begins August 1, 2026, with an estimated completion timeline of 8-12 weeks. Acceptance criteria require the bed to be mounted to manufacturer specifications, all electrical and safety systems to function correctly, absence of fault codes or warning indicators, and final inspection approval by a government or agency representative. The contractor must follow all safety protocols and industry standards, and any changes, unexpected issues, or additional parts must receive approval before proceeding.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| C04_02 WD_12444026Q0126.pdf | ||
| C04_00 solicitation template_12444026Q0126.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work (SOW) 2026 Chevrolet 3500 HD (Single Rear Wheel) OEM Bed Removal and Installation of CM Truck Bed – Model 8'6/84/54/42
1. Vehicle Information
• Make/Model: 2026 Chevrolet 3500 HD
• Configuration: Single Rear Wheel
• Current Condition: Equipped with factory-installed OEM pickup bed and back up camera on factory installed bed
• VIN: 1GC4KSEY1TF291258
2. Contractor Responsibilities The contractor shall perform the following:
A. Removal of Factory Bed
• Safely disconnect all electrical, back up camera, sensors, fuel filler, and auxiliary connections tied to the OEM pickup bed.
• Remove factory bed without damage to the truck frame, chassis wiring, or components.
• Inspect and clean mounting points on the frame after bed removal.
B. Preparation for Upfit
• Verify chassis measurements and mounting compatibility for CM model 8'6/84/54/42.
• Ensure all wiring harnesses, lighting connectors, and fuel filler components are positioned for proper integration with the new bed.
• Provide any necessary mounting hardware if not included by the manufacturer.
C. Installation of CM Truck Bed (Model 8'6/84/54/42)
• Properly mount and secure the CM bed to manufacturer specifications and torque requirements.
• Align and install fuel filler neck, rear lighting, license plate lighting, and reverse sensors (if applicable).
• Connect and test all electrical systems including brake lights, turn signals, reverse lights, and marker lights.
• Ensure the bed sits level, securely fastened, and free of vibration or interference with vehicle components.
D. Quality Check and Testing
• Perform full inspection confirming structural security, proper alignment, and correct electrical function.
• Test vehicle lighting and safety systems to ensure compliance with DOT requirements.
• Verify proper clearance between bed, tires, frame, and suspension components.
3. Deliverables
• Completed removal of OEM bed
• Fully installed CM Truck Bed (Model 8'6/84/54/42)
• Documentation of all work performed
4. Schedule
• Work to begin on: 8/1/26
• Estimated completion: 8-12 weeks
5. Acceptance Criteria The installation will be considered complete when:
• CM bed is mounted to manufacturer specifications
• All electrical and safety systems function correctly
• No fault codes or warning indicators are present
• Vehicle passes final inspection by the government/agency representative
6. Additional Requirements
• Contractor must follow all safety protocols and industry standards.
• Any changes, unexpected issues, or additional parts required must be approved before proceeding.
File details come from the government source that posted it. Updated .