Brand name or equal materials_646-14-102_Reno 2E.pdf

Page 1 of

Project: 646-14-102 Renovate B1 2E for Clinics

The following items should be Brand name or equal:

▪ Mecho 5X Dual Manual Shades

Product Description

a. Construction:

• #10 double brackets with one shade in front of the other with fascia.

• Using #1604 Sand fabric and #0803 Latte blackout fabric

b. Key features:

• Two-way communication.

• Built-in network and dry-contact control.

• Cost-effective, daisy-chained wiring.

• Simplified 3rd-party integration.

• Repeatable, pinpoint shade positioning.

• Quiet and powerful.

c. Network and Wiring:

• Cuts costs associated with using interfaces.

• Is scalable, supporting up to 250 devices on a single bus line.

• Allows control to extend up to 4,000 ft.

• Provides 104 alignment positions and 32 custom presets.

• Enables instant, two-way communication.

• Supports up to eight addresses per unit for multiple, overlapping, group-control options.

d. Support:

• Design facilitates field programming and remote, Internet-based support.

• Optional preprogramming.

• Firmware upgradable over MechoNet, allowing for future enhancements to meet the end user's evolving needs.

• For multi-banded applications, Mecho's adjustable shade coupler is included to speed the installation process and ensure precise, even and consistent shade heights and eliminate hembar misalignment.

▪ Wilsonart – High Pressure Laminate - Color Neo Walnut 7991-38

Product Description

a) Recommended Uses: Wilsonart® Laminate, types 107, 335, and 350, is suitable for use on fine quality residential and commercial furniture, fixtures and casework, and for architectural application on columns, wainscoting, valances, cornices, interior doors and divider systems.

b) General Purpose (HGS) Type 107 is most frequently used for work surfaces on counters, islands, vanities, desks and tables. Typical vertical uses include surfacing for wall panels, teller cages and the front panels of workstations, such as those in hospitals, airports and restaurants. Type 107 is produced for both horizontal and vertical interior applications where the surface must be functional, durable and decorative.

Page 2 of

c) Vertical Surface (VGP) Type 335 is the usual choice to surface cabinet walls, doors and drawer panels. It often appears on the vertical surfaces of desks, restaurants booths and maître d’ stations, and as architectural cladding. Type 335 is intended for vertical applications where a functional, durable, decorative surface must absorb somewhat less impact than a comparable horizontal surface. VGP surfaces may be postformed to achieve radius edges.

d) Postforming (HGP) Type 350 adds the decorative capability of a soft edge to any typical laminate use. Common applications of postforming laminates are formed edges for counters, desktops, cabinet doors and drawer panels. Type 350 is intended for use on vertical and horizontal interior surfaces where it is necessary or desirable to roll the laminate on a simple radius over the edge of the substrate. This eliminates seams and leaves an attractive surface.

e) Wilsonart® HD® finishes feature Antimicrobial Protection that helps inhibit the growth of stain and odor causing bacteria, mold, and mildew on your countertop or surface. Wilsonart’s Antimicrobial Protection won’t wash away or wear off. Premium and Standard finishes are available with Antimicrobial Protection upon request during the ordering process.

f) Product Composition

a. Decorative surface papers impregnated with melamine resins are pressed over Kraft paper core sheets impregnated with phenolic resin. These sheets are then bonded at pressures greater than 1000 pounds per square inch at temperatures approaching 300°F (149°C). Finished sheets are trimmed, and the backs are sanded to facilitate bonding.

g) Basic Limitations

a. Wilsonart® Laminate is for interior use only and is not recommended for direct application to plaster, concrete walls, or gypsum wallboard. It is not structural material and must be bonded to a suitable substrate. Do not subject Wilsonart® Laminate to extremes in humidity or temperatures higher than 275°F (135°C) for substantial periods of time, or intense, continuous, direct sunlight.

h) Patterns & Colors

a. Available in a full range of solid colors, stones, marbles, woodgrains, leathers and patterns. See all designs at www.wilsonart.com. Please see actual sample before specifying.

i) Finishes

a. #01 High Gloss - Premium A mirror sheen finish, which gives a smooth, brilliant appearance. #01-High Gloss finish also features AEON™ Enhanced Scratch & Scuff- Resistant Performance Technology. Can be used for horizontal applications such as countertops and light-to-medium commercial applications. Excellent for vertical applications. Nominal Glossometer Reading = 110

b. #05 Timbergrain - Premium An overall finish with dimensional low-sheen, realistic ticking and natural variation across the sheet, looks very much like the surface of natural wood veneer. #05 finish features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications.

Nominal Glossometer Reading = 4.5

c. #07 Textured Gloss - Premium A textured finish which reproduces the high sheen of waxed wood furniture. #07 finish features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications.

Nominal Glossometer Reading = 42

d. #12 SoftGrain - Premium A dense wood grain structure that is low gloss and soft to the touch. Subtle highlights of reflectivity randomly occur within the embossed grains, creating a sophisticated raw wood look. #12 finish features AEON™ Enhanced Scratch &

Page 3 of

Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 8

j) #16 Casual Rustic - Premium A woodgrain texture with a blend of grain variations ranging from linear to subtle movement with random, irregular features. The overall low gloss surface is accented with higher sheen woodgrain ticking and random highlights. #16 finish features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 6

k) #18 Linearity - Premium A directional texture running the length of the sheet, having a narrow, random and matte-gloss linear quality. It is complementary to linear woodgrains, and linear patterns (such as the “Satin” series), and provides dimension and visual movement to solid colors. #18 finish features AEON™ Enhanced Scratch & Scuff Resistant Performance Technology.

Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 18

l) #19 Leno Weave – Premium Random intersecting horizontal and vertical lines create a geometric weave with a matte-gloss finish. Recommended for horizontal and vertical applications. #19 finish features AEON™ Enhanced Scratch & Scuff Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 15

m) #21 Soft Silk – Premium A smooth, ultra-matte finish with a silky, soft touch. This minimalist finish gives the surface a genuine stone feel. Recommended for horizontal and vertical applications. #21 finish features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 8

n) #22 Antique - Premium A mixture of varying low gloss features combined with organic movement, indicative of the surface of an aged stone or an antique metal. Antique features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 9

o) #28 Gloss Line - Premium A linear woodgrain texture with varied widths of narrow grain structures in an alternating mix of matte and gloss surfaces areas. Gloss Line features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 5

p) #35 Mirage-Wilsonart® HD® Subtle variations in matte and gloss finish connect to nature’s own finishes: rough and weathered, smooth and polished. #35 finish features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Gloss Reading = 50

q) #38 Fine Velvet Texture A smooth textured finish with moderate reflective value. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 14 #52 Quarry - Premium Premium finish emulating the “pitted” look of polished natural stone. #52 features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 55

r) #55 Glaze-Wilsonart® HD® A layering of matte features over a semi-gloss glaze, creates this timeworn effect. #55 finish features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical application. Nominal Gloss Reading = 25

s) #57 Aligned Oak – Wilsonart® HD® Authentic realism is brought to the surfaces using synchronized texture as each elegantly aged oak design exhibits the natural dimension and feel or real world. #57 finish features AEON™ Enhanced Scratch & Scuff Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossmeter Reading = 7

Page 4 of

t) #60 Matte - Standard Textured finish with a moderate reflective quality. Recommended for horizontal and vertical applications. Nominal Glossmeter Reading = 10

u) #78 Fine Grain - Premium The Fine Grain premium finish features the polish and luxe of a real wood veneer, with a subtle, narrow grain structure that runs the length of the sheet. #78 finish features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossmeter Reading = 38

v) #79 Ridgewood – Premium An overall matte finish with ridged dimensional features creating a linear woodgrain effect. #79 finish features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossmeter Reading = 4.5

NOTE: Nominal Glossmeter readings are made at a 60° angle of incidence.

▪ Tarkett IQ Granit SD Homogeneous Vinyl Flooring - Color 329 Clay

Product Description

A. Construction

a. Homogeneous construction with carbon veining and carbon coated backing for consistent conductivity.

B. Performance, wear, and repair characteristics:

a. permanently static dissipative to add safety for people and equipment.

b. unique surface restoration technology that requires no floor finish—ever. For the life of the floor, surfaces are continuously restored to their original appearance with a simple dry buffing.

C. Size

a. 6' 6” (2m) wide x 75’6” linear feet (23m) per roll

D. Wearlayer Thickness

a. .080 inches (2.00 mm)

E. Overall Thickness

a. .080 inches (2.0 mm)

F. Pattern Repeat

a. Random Repeat, Reverse Sheet for Seaming

G. Product Performance and Technical Data

a. Sheet material meets ASTM F1913 Vinyl Sheet Floor Covering Without Backing

b. Tile material meets performance requirements of ASTM F 1700, Class I, Type A performance for Solid Vinyl Tile

c. Static coefficient of friction (ASTM D 2047): ≥ 0.5 SCOF

d. Resistance to Light (ASTM F1515): Δ ≤ 8

e. Static Load Limit (ASTM F 970): 250 psi ≤ 0.005”

i. *Modified 2000 psi: ≤ 0.005”

f. Flammability (ASTM E648): Class 1 (>0.45 W/cm2)

g. Electrostatic Testing:

i. ASTM F150 (Electrical Resistance): 106 to 109 ohms

ii. ANSI/ESD S7.1 (Protection of Electrostatic Discharge of Susceptible Items

– Flooring Material): 106 to 109 ohms

iii. ANSI/ESD STM 97.1 (Resistance to Ground): < 109 ohms

iv. ANSI/ESD STM 97.2 (Body Voltage Generation): < 100 volts

h. CAN/ULC S102.2: FSR 155 / SDC 240

Page 5 of

H. Roll Adhesive:

a. Tarkett 925 Adhesive Coverage:

b. Porous Substrate: 250-300 sq. ft./gal.

c. Non-porous Substrate: 250-300 sq. ft. per gallon

I. Tarkett 906 Conductive Adhesive Coverage (Apply to copper strips only):

a. Porous Substrate: 165-225 sq. ft. per gallon

J. Copper Ground 100’ Coil:

a. Product number: 1256727

▪ Stonhard Flooring – Stontec TRF

PRODUCT DESCRIPTION

a) Stontec TRF is a nominal 3/16 in./5 mm thick durable floor system with a decorative, stain-resistant surface. Its troweled base provides superior impact resistance and allows Stontec

TRF to be applied over rough substrates. It is comprised of: Urethane Mortar A four-component, troweled, high-solids, urethane mortar system that is applied at 1/8 in./3 mm.

TRF Undercoat A two-component, high-solids, epoxy bonding coat. A colored coat that accepts the flakes. Stontec Flakes Brightly-colored flakes Stonseal CA7 A two-component, UV-resistant, aliphatic polyaspartic urethane sealer.

▪ Sherwin Williams Paint 1.) Super Paint - Air Purifying

a. used in Patient Rooms and Staff Areas

b. Contributes to better indoor air quality

c. SuperPaint® Air Purifying Technology* Helps reduce volatile organic compounds (VOCs) from potential sources like carpet, cabinets and fabrics

d. Odor eliminating technology helps reduce common household odors like cooking, smoking and pets

e. Anti-microbial agents help inhibit the growth of mold and mildew

f. Available in a wide variety of colors that create balance, including 540 inspired hues from the Living Well™ collection

g. Available in flat, satin and semi-gloss finishes

2.) Super Paint – Sanitizing Technology

a. used in Patient Rooms and Staff Areas

b. Keeps walls sanitized 24/7

c. Remains effective in killing 90% of certain bacteria* even after repeated contamination for up to four years when the integrity of the surface is maintained

d. Helps prevent the spread of bacteria on painted surfaces

e. EPA-registered microbicidal paint that kills 99.9% of staph and E. coli on painted surfaces within 2 hours of exposure

f. Goes on fast and easy

g. Available in a wide variety of colors that create balance, including 540 inspired hues from the Living Well™ collection

h. Available in satin sheen

Page 6 of

3.) Pro Industrial™ Water Based Catalyzed Epoxy Eg-Shel, B73-300 Series

a. used in high traffic areas

b. Chemical resistance

c. Impact and abrasion resistance

d. Wash and scrub resistance

e. Flash rust resistance

f. Corrosion resistance

g. Early moisture resistance

h. Gold Standard for Chemical Emissions – low VOCs

4.) Pro Industrial™ Acrylic Semi-Gloss, B66-650 Series

a. used on door frames and miscellaneous metals

b. Abrasion resistance for optimal performance in heavy-use spaces

c. Chemical resistance

d. Outstanding early moisture resistance

e. Flash rust/early rust resistance

f. withstands the repetitive cleaning of public spaces

g. Fast dry for quicker return to service

h. Gold Standard for Chemical Emissions – low VOCs

▪ Nora Environcare

Product Description

A. Construction

a. Electrostatically dissipative (ESD) rubber sheet and tile flooring

B. Performance, wear, and repair characteristics:

a. Homogeneous rubber compound with a random scattered design

b. nora® vulcanized rubber compound 948 with environmentally compatible color pigments that are free of toxic heavy metals like lead, cadmium, or mercury C. Size

a. Sheet: 49.21’ x 48” (15 m x 1.22 m)

b. Tile: 24.015” x 24.015” (610mm x 610)

D. Wearlayer Thickness

a. .080 inches (2.00 mm)

E. Overall Thickness

a. .080 inches (2.0 mm)

F. Pattern Repeat

a. Random Repeat, Reverse Sheet for Seaming

G. Product Performance and Technical Data H. Technical Data

Flammability (E648/NFPA 253): ≥

0.45 watts/sq. cm for Class 1 is required

NBSIR 75 950, 1.0

Smoke Density (ASTM E662/NFPA 258): < 450 is required

NBS, 81 (flaming) and 122 (non-flaming)

Surface Burning (CAN/ULC-S102.2): FSC1 of 60 and SD of 550

Page 7 of

Slip Resistance (ASTM D2047): ≥

0.5 is required

Static coefficient of friction, Neolite dry 0.92 Neolite wet 0.89

Bacteria Resistance (ASTM

E2180/ASTM G21):

Resistant to bacteria, fungi, and micro-organism activity

Sound Absorption (ISO 10140-3): ΔLw 6dB (compare only Δ values) Hardness (ASTM D2240): ≥ 85 is required

Shore type “A”, 92

Static Load (ASTM F970): ≤ 0.005 inches with 250 lbs. is required

Residual compression of 0.003 inches with 800 lbs.

Rolling Load Limit (ASTM F2753): ≤ 450 lbs. / sq. inch; no forklift traffic Abrasion Resistance (ASTM D3389):

≤ 0.035 oz. (1.0g) is required

1.1 lbs. (500g) load on H-18 wheel with 1000 cycles,

0.002 oz. (0.07g) weight loss

Oil & Grease Resistance (EN/ISO 26978):

Pass

Static Generation (ANSI ESD S97.2):

< 20 Volts

Decay Time (FTM 101 C 4046): < 0.25 (sec) Conductivity (ASTM F150): 106 < 109 (ohm

A. Environmental Attributes

a. Carbon: All flooring products 3rd party verified carbon neutral throughout their entire life cycle through the Interface Carbon Neutral FloorsTM program. Learn more at www.interface.com/carbonneutral.

b. Indoor Air Quality: GREENGUARD Gold Certified for low VOC emissions in compliance with CDPH 01350

c. Material Composition: Free of added formaldehyde, heavy metals and ortho-phthalates, fluorinated chemicals (PFAS), and halogenated flame retardants

d. Production Plant Certifications: ISO 9001:2000, ISO 140

B. WARRANTIES

a. Limited 10-year conductivity warranty and 15-year warranty

▪ Mapei – Ultacolor Plus FA Grout

DESCRIPTION

a. Ultracolor Plus FA with DropEffect™ technology is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from

1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s

High-Hydrated Cement Technology (HCT™) to eliminate the common problems related to

Portland-cement grout, such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.

b. FEATURES AND BENEFITS

• Fine aggregate (FA) allows for narrow joint widths and improved cleanability.

• No efflorescence (free of Portland cement)

• Easy to install and stain-resistant

Page 8 of

• No sealer required INDUSTRY STANDARDS AND APPROVALS

• ISO 13007: Classification CG2WAF

• ANSI: Meets or exceeds A118.6 and A118.7 industry standards

c. WHERE TO USE

• Commercial and residential construction suitable for both interior and exterior installations

• For grouting dimensional stone, slate, granite, stone agglomerates and most types of ceramic, ceramic mosaic, quarry, brick paver, porcelain, glass and clay tiles

• When installing in submerged jobsites (swimming pools, spas, water features and fountains), allow 72 hours of curing.

• For use where grout will be exposed to foot traffic within 3 to 4 hours

• For joint widths from 1/16" to 3/4" (1.5 to 19 mm)

d. LIMITATIONS

• Sealing is not required. However, a high-performance penetrating grout sealer may still be applied from MAPEI’s UltraCare ® family of sealers, which includes Penetrating Plus Stone, Tile & Grout Sealer; and Penetrating Plus SB Stone & Porcelain Tile Sealer. Follow the directions provided in the UltraCare Maintenance Guide.

• Do not use when a highly chemical-, impact- and stain-resistant grout is required or in heavy industrial tile installations. Instead, use an appropriate MAPEI epoxy grout (see the respective Technical Data Sheet [TDS] for details).

• When grouting in temperatures above 80°F (26°C), see the technical bulletin “Installing tile in hot weather” at www.mapei.com or consult MAPEI’s Technical Services Department.

• Consult MAPEI’s Technical Services Department for installation recommendations regarding substrates and conditions not listed.

e. LOCATION COLOR USE:

• Wall Tile – Bathroom: Chocolate #07

• Wall Tile – Fireplace wall: Chocolate #07

• Kitchen Backsplash Tile: Ivory #39

▪ Tarkett IQ Eminent Homogeneous Vinyl Flooring - color 905 Brick

Interface LVT

A. Construction

a. Homogeneous construction

B. Performance, wear, and repair characteristics:

a. Abrasion Resistant

b. No Wax

c. unique surface restoration technology that requires no floor finish—ever. For the life of the floor, surfaces are continuously restored to their original appearance with a simple dry buffing.

C. Size

a. 6' 5” (2m) wide x 75’5” linear feet (23m) per roll

D. Wearlayer Thickness

a. .080 inches (2.00 mm)

E. Overall Thickness

a. .080 inches (2.0 mm)

Page 9 of

F. Pattern Repeat

a. Random Repeat, Reverse Sheet for Seaming

G. Product Performance and Technical Data

a. Sheet material meets ASTM F1913 Vinyl Sheet Floor Covering Without Backing

b. Tile material meets performance requirements of ASTM F 1700, Class I, Type A performance for Solid Vinyl Tile

c. Polyurethane Reinforced (ASTM F410): Yes

d. Tile Squareness (ASTM F20550: Passes

e. Tile Dimensional Stability (ASTM F2199): Passes

f. Flexibility (ASTM F137): Passes

g. Total Thickness (ASTM F386): 0.080 in. (2mm)

h. Static Load Limit (ASTM F 970): 250 psi ≤ 0.005”

i. *Modified 2000 psi: ≤ 0.005”

i. Resistance to Heat (ASTM F1514): ΔE ≤ 8

j. Resistance to Light (ASTM F1515): ΔE ≤ 8

k. Slip resistance (ASTM D2047): SCOF ≤ 0.5

l. Fire Performance (ASTM E648 Flooring radiant Panel): Class 1

m. CAN/ULC S102.2: FSR 20/ SDC 155

WARRANTIES: Limited 20-year warranty

INSTALLATION

a. See homogeneous sheet or tile flooring installation instructions for complete details for manufacture.

b. Roll Adhesive:

i. Tarkett 925 Adhesive Coverage:

ii. Porous Substrate: 250-300 sq. ft./gal.

iii. Non-porous Substrate: 250-300 sq. ft. per gallon

c. Tarkett 975 Two-Part Urethane Adhesive Coverage: Porous & Non-porous Substrate: 225- 250 sq. ft. per gallon

d. Tarkett 996 Two-Part Epoxy Adhesive Coverage: Porous & Non-porous Substrate: 225-250

sq. ft. per gallon

e. Tarkett RollSmart Adhesive Coverage: Porous & Non-porous Substrate: 350 - 400 sq. ft. per gallon (3/8" Nap Paint Roller used with a paint tray)

f. Tarkett Cold Weld Liquid Coverage: 175 – 200 lf. per. 4.5oz. tube

▪ Acrovyn Privacy Curtain Track 1062N

a. Cubicle Tracks: CS Cubicle Curtains #NL6062 Narrowline surface-mounted tracks of heavy extruded aluminum alloy 6063-T5, 29/32" x 11/16", slotted to receive roller carriers, complete with accessories and components required for complete and secure installations including splices, end caps and corner bends.

b. Corner Bends: Corner bends up to 36” radius are to be fabricated in one continuous “L” shape. Radiuses above 36” to be continuous or spliced based on room condition.

c. Finish:

a. Anodized aluminum

d. White powder coat

Page 10 of

▪ Interface Luxury Vinyl Tile in the following Series: Studio Set / Brushed

Lines / Natrive Fabric A. Construction

a. High Performance Luxury Vinyl Tile

b. Free of Ortho Phthalates, Added Formaldehyde and Heavy Metal Stabilizers

B. Performance, wear, and repair characteristics:

a. Carbon Neutral Flooring

b. Noise Reduction Biophilic Design

C. Size

a. Tile: 25 cm x 1 m (9.845 in x 39.38 in

D. Wearlayer Thickness

a. 22 mil

E. Overall Thickness

a. 4.5mm

F. Pattern Repeat

a. No Repeat – Installation direction as shown on flooring plans.

G. Technical Data

a. IIC Sound Rating ASTM E492-09 64IIC

b. Slip Resistance ASTM D2047 >0.55 wet/dry, ADA Compliant

c. Static Load Limit ASTM F970 1500 psi

d. Flexibility ASTMF137 Passes

e. Resistance to Heat ASTM F1514 Passes

f. Resistance to Light ASTM F1515 Passes

g. Radiant Flux ASTM E648 Class I

h. Smoke Density ASTM E-662 <450

i. Thickness ASTM F386 Passes

j. Residual Indentation ASTM F925 Passes

k. Resistance to Chemicals ASTM F925 Passes

H. Environmental Attributes A. Embodied Carbon 9.2 Kg Co2/M2 B. Full Life Cycle Carbon Emissions – Carbon Neutral Floors C. Total Recycled Content (Pre Consumer) 39% D. Indoor Air Quality: Floor Score SCS-FS-04366 / CPDH 01350 compliant – Gold

I. WARRANTIES: Limited 15-year warranty

▪ Johnsonite TightLock Wall Base - color Either Ore

a. Construction: Tarkett TightLock Carpet wall base is a wedge-shaped toe-less base specifically designed to be installed prior to traditional, direct, or double glue down carpet installations. TightLock Resilient Topset wall base is specifically designed for resilient installations. Where there is a transition from resilient flooring to carpet. All TightLock profiles are available in a rubber formulation, which meets the performance requirements of ASTM F 1861, Type TP (Thermoplastic Rubber), Group 1 (solid) Standard Specification for Resilient Wall Base.

b. Styles: TightLock for Carpet (Straight profile)

Page 11 of

i. TDC-XX (Rubber) TightLock for Carpet (Straight profile without spacer)

ii. TTDC-XX (Rubber) TightLock for Resilient Top Set (Coved profile) TDCR-XX

(Rubber)

c. Physical Characteristics: TightLock for Carpet (Straight profile)

i. Thickness: 1/4" (6.35 mm) thick wedge-shaped profiles

ii. Heights: 3-1/4" (8.26 cm), 4-1/2" (11.43 cm), and 6-1/2" (16.51 cm)

iii. Lengths/Packaging: 4' (1.22 m) straight lengths, 25 pc/carton or 75' (22.9 m) coiled lengths

iv. Profile design: 1/4" (6.35 mm) hidden spacer for the carpet (also available without spacer), with a 3" (7.62 cm), 4-1/4" (10.8 cm), and 6-1/4" (15.88 cm) exposed face surfaces respectively

v. Available Corners: Flexible inside/outside corner design for TightLock Carpet, outside corner available for TightLock Resilient (Inside corner not available), 4" (10.16 cm) returns, and packaged 25 per carton TightLock for Resilient Topset (Coved):

vi. Thickness: 1/4" (6.35 mm) thick wedge-shaped profile with toe (Coved)

vii. Heights: 3-1/8" (7.94 cm), 4-3/8" (11.11 cm), and 6-3/8" (16.19 cm)

Lengths/Packaging: 4' (1.22 m) straight lengths, 25 pc/carton or 75' (22.9 m) coiled lengths Available Corners: Flexible inside/outside corner design for TightLock Carpet, outside corner available for TightLock Resilient (Inside corner not available), 4" (10.16 cm) returns, and packaged 25 per carton

d. PRODUCT PERFORMANCE AND TECHNICAL DATA

i. Meets or exceeds the performance requirements for resistance to heat/light aging, chemicals, and dimensional stability when tested to the methods, as described, in ASTM F-1861.

e. Flexibility: Will not crack, break, or show any signs of fatigue when bent around a 1/4" (6.4 mm) diameter cylinder.

f. Chemical resistance (ASTM F 925): Passes – 5% acetic acid, 70% isopropyl alcohol, mineral oil, 5% sodium hydroxide solution, 5% hydrochloric acid solution, 5% sulfuric acid solution, 5% household ammonia solution, and 5.25% household bleach solution

g. Resistance to light (ASTM F 1515): ΔE< 8 2.5.

h. Fire Resistance: ASTM E 648 (NFPA 253): Critical Radiant Flux – Class I

▪ Johnsonite Perceptions Wall Base in color Either ore ASI Lockers

a. Construction: Tarkett Designer Wall Base is manufactured from a proprietary rubber and vinyl formulation designed specifically to meet the performance and dimensional requirements of ASTM F-1861, TP (Thermoplastic Rubber), Group 1 (solid), Style A, Standard Specification for Resilient Wall Base.

b. Styles & Physical Characteristics:

i. Recess (RWDC) with angled toe or RWDCT for straight: 0.125" (3.17 mm) thickness, 4-1/4" (10.8 cm) height, available in 120' (36.58 m) coiled lengths (or special order 4' straight lengths)

ii. Flex (RWDC-XX-F with toe)

iii. Contour (RWDC-XX-G with toe)

iv. Royale (RWDC-XX-E with toe): 0.125" (3.17 mm) thickness, 4-1/4" (10.8 cm) height, Page 12 of

120' (36.58 m) coiled lengths (or special order 4' straight lengths).

v. Inside and Outside Corners available with 4" (10.16 cm) returns packaged 25 per carton, add LIC (Inside corners) or LOC (Outside corners)

c. PRODUCT PERFORMANCE AND TECHNICAL DATA 2.1. Meets or exceeds the performance requirements for resistance to heat/light aging, chemicals, and dimensional stability when tested to the methods, as described, in ASTM F-1861.

i. Flexibility: Will not crack, break, or show any signs of fatigue when bent around a 1/4" (6.4 mm) diameter cylinder.

ii. Chemical resistance (ASTM F 925): Passes – 5% acetic acid, 70% isopropyl alcohol, mineral oil, 5% sodium hydroxide solution, 5% hydrochloric acid solution, 5% sulfuric acid solution, 5% household ammonia solution, and 5.25% household bleach solution

iii. Resistance to light (ASTM F 1515): ΔE< 8

iv. Fire Resistance:

v. CAN/ULC-S102.2: FSR 165 / SDV 345

d. ASTM E 648 (NFPA 253): Critical Radiant Flux – Class I

▪ Johnsonite Millwork Systems Wall Base - color Either Ore

a. Construction: Tarkett Millwork Resilient Wall Base is manufactured from a proprietary thermoplastic rubber formulation designed specifically to meet the performance and dimensional requirements of ASTM F-1861 Standard Specification for Resilient Wall Base, Type TP, and Group 1.

b. PRODUCT PERFORMANCE AND TECHNICAL DATA 2.2. Millwork Wall Base meets or exceeds the performance requirements for resistance to heat/light aging, chemicals, and dimensional stability when tested to the methods, as described, in ASTM F-1861.

2.3. Flexibility: Will not crack, break, or show any signs of fatigue when bent around a 1/4" (6.4 mm) diameter cylinder. 2.4. Chemical resistance (ASTM F 925): Passes – 5% acetic acid, 70% isopropyl alcohol, mineral oil, 5% sodium hydroxide solution, 5% hydrochloric acid solution, 5% sulfuric acid solution, 5% household ammonia solution, and 5.25% household bleach solution 2.5. Resistance to light (ASTM F 1515): ΔE< 8 2.6.

Fire Resistance: ASTM E 84 Flame/Smoke (NFPA 255): Class B, ≤ 450 ASTM E 648 Critical Radiant Flux (NFPA 253): Class I

▪ ASI Storage Solutions – Phenolic Lockers

Product Description:

a. Fire rating is a must of Class ‘A’. Construction of the product in its entirety is as follows:

b. 1/2" face, 10 colors, Black Core Phenolic

c. 1/2" tops, bottoms and shelves, speckle tone Black Core Phenolic

d. 3/8" sides and back, speckle tone Black Core Phenolic

e. Black powder coat 120 degree opening stop hinge

f. Black recessed vertical acting handle for safety and security with padlock hasp, accepts built-in locks

g. Self-latching door

h. 10-year warranty

Page 13 of

i. Full perimeter ventilation

j. Fully assembled single unit construction

k. Slope tops, finished (colored) end panels and fillers available

▪ Acrovyn Handrail in Natural Peregrine-1607Acrovyn Corner Guard

a. Construction: Acrovyn Handrail is

i. Engineered PETG: Extruded material should be high impact Acrovyn 4000 with shadowgrain texture, nominal .078" (1.98mm) thickness. Chemical and stain resistance should be per ASTM D543 standards as established by the manufacturer. Colors to be indicated in the finish schedule from one of manufacturer’s standard color range.

ii. Aluminum: Extruded aluminum should be 6063-T6 alloy, nominal .062" (1.57mm) thick crash rail retainer. Minimum strength and durability properties as specified in ASTM B221.

iii. Stainless Steel: Handrail to be type 304 alloy with #4 satin finish, nominal ¼" (6.35mm) thickness. Cast brackets to be type 304 alloy with #4 satin finish.

iv. Fasteners: All fasteners to be non-corrosive and compatible with aluminum retainers. All necessary fasteners to be supplied by the manufacturer.

b. Styles:

i. Surface mounted

c. Physical Characteristics:

a. Engineered PETG Handrails to be Acrovyn 4000 by Construction Specialties:

i. Surface mounted handrail and crash rail configuration with color matched end caps returning to the wall and mounting brackets spaced as indicated on C/S installation instructions.

ii. Attachment hardware shall be appropriate for wall construction.

b. Model P-RSAN 6 3/8" h (161.9mm) handrail/crash rail configuration consisting of a round stainless-steel handrail and engineered PETG crash rail with matching end caps returning to the wall. Dual cantilevered mounting brackets to be stainless steel; optional powder coating available in (8) finishes. Select crash rail from one of (64)* Acrovyn solid colors or (18)* Chameleon patterned colorways, which include (16) woodgrains and (2) metals. (*Specifier note: refer to color selectors to determine which colors and patterns are MBDC Cradle to Cradle® Certified Gold or Silver for Acrovyn wall guards.)

Finishes A. General: Comply with NAAMM “Metal Finishes Manual” for recommendations relative to applications and designations of finishes.

PRODUCT PERFORMANCE AND TECHNICAL DATA

a. Installer qualifications: Engage an installer who has no less than 3 years experience in installation of systems similar in complexity to those required for this project.

b. Manufacturer’s qualifications: Not less than 5 years experience in the production of specified products and a record of successful in-service performance.

c. Code compliance: Assemblies should conform to all applicable codes including IBC, UBC, SBCCI, BOCA, Life Safety and CA 01350.

Page 14 of

d. Fire performance characteristics: Provide engineered PETG wall protection system components with UL label indicating that they are identical to those tested in accordance with ASTM E84 for class 1 characteristics listed below:

a. Flame spread: 25 or less

b. Smoke developed: 450 or less

e. Impact Strength: Provide assembled wall protection units that have been tested in accordance with the applicable provisions of ASTM F476.

f. Chemical and stain resistance: Provide wall protection system components with chemical and stain resistance in accordance with ASTM D543.

g. Color match: Provide wall protection components that are color matched in accordance with the following:

a. Delta Ecmc of no greater than 1.0 using CIELab color space. (Specifier note: Construction Specialties' colors are matched under cool white, fluorescent lighting and computer controlled within manufacturing tolerances. Color may vary if alternate lighting sources are present).

b. Single source responsibility: Provide all components of the wall protection system manufactured by the same company to ensure compatibility of color, texture and physical properties.

▪ Acrovyn Corner Guard in color Brushed Stainless (exterior Corners) & Irish

Cream 997 (All other corners)

a. Construction: Acrovyn Corner Guard is self-adhesive with a nose radius 3/32” (2mm)

b. Engineered PETG: Extruded material should be high impact Acrovyn 4000 with shadow grain texture, nominal .078" (1.98mm) thickness. Chemical and stain resistance should be per ASTM D543 standards as established by the manufacturer.

Colors to be indicated in the finish schedule from one of manufacturer’s standard color range.

c. Recycled PETG: PVC-free regrind retainer.Fasteners: All fasteners to be non-corrosive and compatible with aluminum retainers. All necessary fasteners to be supplied by the manufacturer.

d. Styles:

i. 90-degree angle only

ii. Odd-degree angles

iii. 1-1/2” Wing Size

iv. 3-1/2” Wing Size

e. Physical Characteristics:

i. Engineered PETG Corner Guards to be Acrovyn 4000 by Construction

Specialties: Surface mounted guards consisting of a continuous retainer with snap-on Acrovyn 4000 cover.

ii. Color matched end caps to be provided for both partial and full height applications. Attachment hardware shall be appropriate for wall construction.

Page 15 of

PRODUCT PERFORMANCE AND TECHNICAL DATA

i. Installer qualifications: Engage an installer who has no less than 3 years experience in installation of systems similar in complexity to those required for this project.

ii. Manufacturer’s qualifications: Not less than 5 years experience in the production of specified products and a record of successful in-service performance.

iii. Code compliance: Assemblies should conform to all applicable codes including IBC, UBC, SBCCI, BOCA, Life Safety and CA 01350.

iv. Fire performance characteristics: Provide engineered PETG wall protection system components with UL label indicating that they are identical to those tested in accordance with ASTM E84 for class 1 characteristics listed below:

1. Flame spread: 25 or less

2. Smoke developed: 450 or less

v. Impact Strength: Provide assembled wall protection units that have been tested in accordance with the applicable provisions of ASTM F476.

vi. Chemical and stain resistance: Provide wall protection system components with chemical and stain resistance in accordance with ASTM D543.

vii. Color match: Provide wall protection components that are color matched in accordance with the following:

1. Delta Ecmc of no greater than 1.0 using CIELab color space. (Specifier note:

viii. Construction Specialties' colors are matched under cool white, fluorescent lighting and computer controlled within manufacturing tolerances. Color may vary if alternate lighting sources are present).

ix. Single source responsibility: Provide all components of the wall protection system manufactured by the same company to ensure compatibility of color, texture and physical properties.

Project Conditions

i. Materials must be acclimated in an environment of 65°-75°F (18°-24°C) for at least 24 hours prior to beginning the installation.

ii. Installation areas must be enclosed and weatherproofed before installation commences.

▪ Acrovyn – Honeycomb core Door

a. Fire rating is a must of Class ‘A’. Construction of the product in its entirety is as follows:

b. 1-3/4” Regend(RI) Honeycomb Core 16 GA. Will not delaminate with water or steam. Resistant to corrosion, soaps, detergents, and mildew.

c. Door Latch: Stainless Steel surface mounted. (Product Standard)

d. Meets ADA safety/accessibility requirements for emergency access with slotted

“keeper” and gravity hinge.

e. Brackets: Continuous Stainless Steel (stability and durability)

f. Hinges: Continuous Stainless Steel (durability and gravity, self-closing)

g. Door Strike: Continuous Stainless Steel (privacy)

h. Finish: Fossil Teak - 1352