Boelter Dish Room Equip Price List 3-01-24.pdf

TABLE OF CONTENTS

HOBARTGENER AL INFORM ATION

HOBART PRODUCTS & INFORMATION

GENERAL INFORMATION

Contact Information & Website. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Freight Claims Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Shipping Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Terms & Conditions of Sale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Warranty & Return Goods Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #

GENERAL PRODUCT INFORMATION

Ampere Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Extended Warranty — Terms & Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . # Extended Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Shipping Weights and Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #

SCALES

Scale, Digital Receiving (HBR302). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Scale, Mechanical Scales (PR30 and PR309). . . . . . . . . . . . . . . . . . . . . . . . . . . # Scale, Price Computing & Portion Control (PS40). . . . . . . . . . . . . . . . . . . . . . # Scale, Service (HTi Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Scale, Service (HTs Series). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #

FOOD PREP

CENTERLINE PRODUCTS

Mixers — Table Top. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Slicers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #

BERKEL PRODUCTS

Slicers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Specialty — Bread Slicers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Specialty — Flywheel Slicers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Specialty — Vaccum Packaging Machines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . #

DEALER’S CHOICE PRODUCTS

Fat Percent Measuring Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Food Cutters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Food Processors — Bowl Style. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Food Processors — Continuous Feed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Meat Choppers — 4812 & 4822. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Meat Choppers — Knives & Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Meat Choppers — Stuffing Horns. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Mixers, Classic Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Mixers, Legacy® Attachments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Mixers, Legacy® — Table Top. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Mixers, Legacy® — Floor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Peelers – Small. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Power Drive Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Salad Dryers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Slicers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Tenderizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #

SPEC-LINE PRODUCTS

Cutter Mixer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Food Processors — Continuous Feed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Grinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Meat Choppers — 4732 & 4732A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Meat Saws. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Mixer-Grinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Mixers, Legacy® — Floor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Mixers, Spiral. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Peelers — Medium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #

WAREWASHING & WASTE

CENTERLINE PRODUCTS

Commercial Dishwashers — Door-Style. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Commercial Dishwashers — Undercounter. . . . . . . . . . . . . . . . . . . . . . . . . . . #

DEALER’S CHOICE PRODUCTS

Commercial Dishwashers — Undercounter & Glass Washer . . . . . . . . . . . . # Commercial Dishwashers — High & Low Temp Door-Style. . . . . . . . . . . . . . # Commercial Dishwashers — Two-level Door-Style. . . . . . . . . . . . . . . . . . . . . # Foodwaste Disposers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #

SPEC-LINE PRODUCTS

Commercial Dishwashers — Flight-Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Commercial Dishwashers — Conveyor Type. . . . . . . . . . . . . . . . . . . . . . . . . . . # Industrial Washers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Pot & Pan Washer — Turbowash II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Prep Washer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . # Waste Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #

4-5

4-5

6-7

9-11 12-14

19-22

48-51

42-43

37-39 40-41

46-47

68-70

75-76 61-66

86-90

101-102 95-100

104-106

27-28 29-30

83-85

92-94

31-32

701 S. Ridge Avenue Troy, OH 45373

PLEASE VISIT www.hobartcorp.com

OR CALL HOBART AT 1-937-332-3000

TERMS & CONDITIONS OF SALE

HOBARTGENER AL INFORM ATION

This limited price catalog is for making a quick, accurate selection of the correct equipment and prices for orders and quotations. It includes data on the most popular equipment configurations and related accessories.

Refer to your Hobart catalog and spec sheets (available at www.hobartcorp.com) when more detailed information is required. Please do not hesitate to call your local Hobart representative or Hobart Customer Care Department if you need further help.

QUOTATIONS

Written quotations are only valid in writing and for 30 days from the date of the quotation. All quotations are subject to change or withdrawal without prior notice to purchaser.

REQUIREMENTS FOR PROCESSING QUOTES:

1) End User information (name, city, state, and zip code).

2) Machine specifics such as door hinging, voltages, direction of operation, and serial numbers for replacements, if available.

3) Complete Specs, drawings, consultant contact, and coversheet(s).

TO ASSURE PROMPT HANDLING OF YOUR

ORDER, INCLUDE COMPLETE DATA ON THE

FOLLOWING:

Complete “Ship To” address.

“Want-date” indicating when the equipment is to be delivered to the ship-to-address.

End user’s name, address and phone number (unless equipment is being ordered for display plan/stock plan dealership).

PO REQUIREMENTS FOR

PROCESSING ORDERS

1) Your company information (logo) and individual placing the order.

Ellis in credit services for your terms.

5) If the Purchase Order is from a quotation, please reference the quote reference number and date of quote or attached a copy of the quotation.

6) Complete ship to address is with contact name and number if drop shipped.

7) Need by Date – This is the date you wish the order to leave arrive at your location.

8) End-user address to include Country of Final Destination if outside of the US (unless equipment is being ordered for display plan/ stock plan dealership).

11) Detail product information – Model number, voltage, special features, and accessories.

by assigning a Market Segment Code. This information will be very helpful in future product offerings and will not be shared with any outside companies.

SPECIFICATION DATA REQUIRED

(Conveyor dishmachines & refrigeration may require additional information) For ALL Machines

Model Number Electrical Spec Attachments and Accessories

ORDER ACCEPTANCE POLICY

Hobart‘s acceptance of any purchase order con taining any term, provision or condition which is inconsistent with any of the provisions herein shall be of no force and effect and shall not be binding upon Hobart.

FREIGHT CLAIMS

INFORMATION

AT TIME SHIPMENT IS RECEIVED:

■ Observe entire shipment for visible damage and correct amount of pieces. Make notation of shortage or damage on all copies of the freight bill.

■ Count and sign for the number of pieces received.

■ Unpack cartons immediately to check their contents for possible damage.

■ Notify Customer Care at (800) 333-7447 of any damages.

CONCEALED DAMAGE, NOT VISIBLE AT

TIME OF DELIVERY:

■ Call the carrier’s local terminal immediately to report (note time/date and who you spoke to).

■ Carrier must be notified within 5 business days of receipt.

■ Keep all original packaging materials for inspection.

■ Do not move from delivery location, modify, or install equipment.

■ Notify Foodservice Customer Care at (800) 333-7447 for each shipment destination.

Unless customer has made third-party transportation arrangements, Hobart will initiate the carrier claims process once the damage has been assessed and any inspections completed.

HOBART SHIPPING

INFORMATION

All machine prices herein are F.O.B. shipping point, shipping charges prepaid For delivery situations that require additional delivery services due to circumstances such as oversized commodities, insufficient delivery facilities, etc., additional fees will apply. Oversized equipment is defined as any piece of equipment crated dimension with a length of 72" or more and/or a height of 90" or more.

For customer initiated reconsignment, a $250 reconsignment fee is applicable for each shipment.

Customer responsible for shipping charges from US West Coast for Alaska and Hawaii. Always specify your forwarder to be used and give complete address of the forwarder.

Accessory only orders are F.O.B. shipping point, shipping charges prepaid and add.

State and local taxes are not included in the price.

CONDITIONS FOR EXPORT

PRICING

Hobart reserves the right to apply additional charges for equipment for specifications other than those stated in this price book. Please contact Export Customer Care at telephone (937) 332-2154 or fax (937) 332-2976 for details.

COUNTRY OF DESTINATION

Hobart reserves the right to sell specific products for export if after-sales service cannot be provided in the country of destination.

Please contact Export Customer Care at telephone

(937) 332-2154 or fax (937) 332-2976 for details

EXPORT CONTROL STATEMENT

ITW Food Equipment Group complies with all applicable U.S. export control laws and regulations, specifically including, but not limited to, the requirements of the Arms Export Control Act including the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR). All business with ITW Food Equipment Group must comply accordingly.

COMPLIANCE WITH LAW

Customer shall comply, and shall assist ITW FEG in its efforts to comply, with all statutes, laws, rules and regulations of the Unites States (federal and state) and any other countries which may be applicable to Customer, ITW FEG and/or the activities contemplated under this Agreement, including without limitation the United States export controls, the United States Foreign Corrupt Practices Act and the United States anti-boycott laws. Customer shall not take or fail to take any action that would cause ITW FEG to be in violation of any such statute, law, rule or regulation.

https://www.hobartcorp.com https://www.hobartcorp.com

TERMS & CONDITIONS OF SALE

CENTERLINE by Hobart

TERMS & CONDITIONS OF SALE

BERKEL

GENER AL INFORM ATION

GENER AL INFORM ATION

• To qualify for the 5 and 10-piece quantities, each order must contain a minimum of said quantities and products can be mixed and matched.

Accessories do not count toward quantity levels.

Note: Only Centerline™ by Hobart models can be mixed and matched to meet quantity thresholds.

• Centerline Program Rebate: Dealer will receive a 5% functional rebate on net billings for a minimum quantity of 5 or more pieces on a single order.

• Split shipments are allowed. Partial shipments are not allowed.

• Free freight applies to all serialized Centerline items purchased.

Accessories purchased without a serialized item will be charged freight (see Hobart’s Freight Policy for additional details).

• Free liftgate. Oversized products with crated dimensions of 72" or more in length and/or 90" or more in height may be subject to liftgate fees.

• Standard Hobart payment terms apply.

• Returns are not available for Centerline quantity buys of five (5) or more.

• All Centerline by Hobart products are subject to the current Hobart MAP policy.

• Redistribution of Centerline products is not allowed.

NOTE: Centerline branded equipment comprises a separate family of products and cannot be included as part of any Hobart Dealer’s Choice programs.

If not specified above in the “Terms” section, refer to Hobart Price List for General Information (Terms & Conditions of Sale, Return Goods Policy & Warranty Statement and Legal Terms & Conditions)

Simply designed. To be the best. For you.

centerlinefoodequipment.com 701 S. Ridge Avenue Troy, OH 45373

• To qualify for the 5 and 10-piece quantities, each order must contain a minimum of said quantities and products can be mixed and matched.

Accessories do not count toward quantity levels.

Note: Only Berkel models can be mixed and matched to meet quantity thresholds.

• Centerline Program Rebate: Dealer will receive a 5% functional rebate on net billings for a minimum quantity of 5 or more pieces on a single order.

• Split shipments are allowed. Partial shipments are not allowed.

• Free freight applies to all serialized Berkel items purchased. Accessories purchased without a serialized item will be charged freight (see Hobart’s Freight Policy for additional details).

• Free liftgate. Oversized products with crated dimensions of 72" or more in length and/or 90" or more in height may be subject to liftgate fees.

• Standard Hobart payment terms apply.

• Returns are not available for Berkel quantity buys of five (5) or more.

• All Berkel products are subject to the current MAP policy.

• Redistribution of Berkel products is not allowed.

NOTE: Berkel branded equipment comprises a separate family of products and cannot be included as part of any Hobart Dealer’s Choice programs.

If not specified above in the “Terms” section, refer to Hobart Price List for General Information (Terms & Conditions of Sale, Return Goods Policy & Warranty Statement and Legal Terms & Conditions)

Simple, Practical Performance.

QUALITY SLICERS SINCE 1898

berkelequipment.com 701 S. Ridge Avenue Troy, OH 45373 https://www.centerlinefoodequipment.com https://www.berkelequipment.com

LEGAL TERMS AND CONDITIONS

HOBART SERVICEGENER AL INFORM ATION

1. ACCEPTANCE.

These terms and conditions (“Terms”) and any Service Product Quotation, Equipment Installation Quotation, any other Quotation issued by Hobart Service, Hobart Product Guidelines, or any agreement signed by an authorized representative of each party (each, a “Service Contract”) to which these Terms are attached or referenced, any Hobart Service acknowledgment or invoice, and all documents incorporated by reference herein or therein (“Hobart Service Documents” and together with these Terms and the relevant Service Contract, the “Agreement”), constitute the complete terms governing the sale of services (“Services”) and repair, replacement and/or spare parts (“Parts”) by Hobart Service, a division of ITW Food Equipment Group LLC (“Hobart Service”) to customer purchasing from Hobart Service (“Customer”). Hobart Service may update these Terms at any time without notice. For the current version of these Terms, visit https://www.hobartservice.com/terms. The current version of these Terms shall apply to all Service Contracts executed (or, if no Service Contract is executed, for all Services performed and Parts delivered) after such website has been updated. HOBART SERVICE HEREBY REJECTS ANY ADDITIONAL OR DIFFERENT TERMS OR CONDITIONS PROPOSED BY CUSTOMER, WHETHER OR NOT CONTAINED IN ANY OF CUSTOMER’S BUSINESS FORMS OR ON CUSTOMER’S WEBSITE, AND SUCH ADDITIONAL OR DIFFERENT TERMS WILL BE OF NO EFFECT. No site usage agreement or any other click through agreement required to access a website or on a website will have any binding effect whether or not Hobart Service clicks on an “ok,” “I accept,” or similar acknowledgment. Terms contained or referenced in Customer facility sign-in logs, safety waivers or other similar documentation are hereby rejected and shall not have any binding effect on Hobart Service or its employees. Customer's order of any Services or acceptance of delivery of any Parts manifests Customer's assent to, and acceptance of, the Agreement. Additional or different terms applicable to a particular sale may be specified in the body of a Hobart Service Document or agreed to in writing by the parties in a Service Contract. In the event of a conflict, the following order of precedence will apply: (a) Service Contract; (b) Hobart Service Document terms; (c) these Terms.

2. SERVICES.

Hobart Service will perform Services and sell Parts as set forth in the applicable Service Contract through its branch office (“Branch Office”) local to the applicable Customer location (the “Site”). Hobart Service will perform the Services during the days and hours listed on the Service Contract (“Business Hours”). For each Call (as defined below), Customer shall pay Hobart Service for all time, travel and mileage charges, and all other fees associated with such Call, at the Hobart Rates (as defined below).

Unless otherwise set forth in the Service Contract, additional charges apply to (i) Services provided to Customer locations further than 50 miles from the closest Branch Office, (ii) Services and travel time performed at Customer’s request outside of Hobart’s regular business hours, (iii) installation, inspections and proactive maintenance Services, (iv) taxes, tolls, and business licenses and permits applicable to Hobart Service’s operation as a business, and (v) any other Services not included in the Service Contract which Hobart Service performs for Customer. For such instances, Customer shall pay Branch Office at the Hobart Rates. “Hobart Rates” means (a) for Services, the service time, travel time, mileage charges and other fees at Hobart Service’s then current national rates for labor, travel, mileage and fees, and (b) for Parts, Hobart Service’s list price for such parts in effect when such Parts are used by Hobart Service or shipped to Customer. For Services that require use of specialized forms of transportation other than by conventional motor vehicles, Customer shall pay for all transportation, food, and lodging expenses incurred by Hobart Service. Permits required for performance of the Services are the responsibility of the Customer or the applicable third-party contractor. For Services that include the installation of new equipment, when any removal and/or disposal services are listed Hobart Service’s quotation, Hobart Service will remove and dispose of the existing equipment being replaced by the new equipment. Such existing equipment shall become property of Hobart Service upon removal. Customer waives all claims related to any such existing equipment removed and/or disposed of by Hobart Service, and such equipment cannot be returned to Customer under any circumstances.

“Call” means a visit by Hobart Service to Customer’s location during which Hobart Service services a single piece of Customer’s equipment. Hobart Service may complete a Call in one trip or multiple trips.

Should Services be performed on multiple pieces of equipment within the same visit, each piece is considered a separate Call.

3. PARTS.

Hobart Service will sell Parts for equipment covered in an applicable Service Contract at the Hobart Rates, subject to the availability of such Parts. Hobart Service may provide new or reconditioned Parts.

Replaced parts and assemblies become property of Hobart Service upon removal. For Parts installed by Hobart Service, title and risk of loss transfers to Customer upon installation. For Parts shipped to Customer, title and risk of loss passes to Customer upon receipt by the carrier. Should Customer request expedited freight, Hobart Service will expedite the Parts at Customer’s cost. If Parts are damaged in transit, Customer must file a claim with the carrier, and Hobart Service is not liable for such damage.

Concealed damage and shorted shipments must be reported to Hobart Service’s Parts Department within 5 days of delivery. Hobart Service will only install genuine OEM replacement parts. Hobart Service will not install parts provided by Customer that were not purchased from Hobart Service.

4. RETURNS.

Customer may only return Parts with Hobart Service’s written authorization, in Hobart Service’s sole discretion. Return requests must include the item and invoice number and reason for return. Customer will be responsible for any applicable restocking fees. No return requests will be accepted for any customer orders or after 90 days from the date of invoice. All returned Parts must be unused, in saleable condition, and in the original packaging. Except to the extent prohibited by law, Customer is responsible for shipping return Parts to Hobart Service’s designated location. Hobart Service will issue a credit or a refund at its election after the returned Part has been received and inspected. Failure to comply with this section will result in any credit being withheld or reduced accordingly in Hobart Service’s discretion.

The following items are not eligible for return: non-stock parts, hazardous materials with a shelf life, electronic boards or electronic components that have been opened, commercial standard items (e.g., nuts, bolts, screws), and multiple quantity items if less than the original quantity is returned.

5. PRICING AND PAYMENT.

Prices and rates are in U.S. dollars and are subject to change without notice, unless otherwise set forth in a Service Contract. All payments are due within 30 days of the invoice date with approved terms (and COD if no credit terms have been offered by Hobart Service in writing). Hobart Service may withhold Services and Parts if Customer has any past-due invoices. Customer is limited to $25,000 annually in credit card payments in the aggregate, and all other payments must be made by ACH, wire or check. If this Service Contract automatically renews, the fees for any renewal term will be those contained in the “Renewal Invoice” provided to Customer by Hobart Service. Shipping charges will be applied based on the delivery method chosen by Customer. Shipping times are estimates only. Customer will be charged the amount of all applicable taxes (federal, state, provincial and/or local) based on the shipping address. Customer is responsible for all other taxes related to any purchases hereunder. Overdue invoices will incur interest at the rate of 1.5% per month or, if lower, the maximum rate allowed by law.

Customer shall reimburse Hobart Service for all expenses, fees and/or costs (including attorney’s fees) incurred by Hobart Service while attempting to collect any overdue balances.

6. QUOTATIONS.

Quotations must be in writing and are only valid for 30 days for Service Product Quotations and 90 days for Equipment Installation Quotations. All quotations are subject to change or withdrawal without prior notice to Customer. Quotations are made subject to approval of Customer’s credit. Hobart Service may refuse orders and has no obligation to supply Parts or Services unless Hobart Service issues an order acknowledgement or upon the shipment of Parts or commencement of Services.

7. SITE SURVEY.

Hobart Service may conduct a Site survey, which is intended to identify problems which can be readily identified through visual inspection. However, Customer is solely responsible for the state of the Site (including electrical and plumbing lines). During a survey, Hobart Service is under no obligation to excavate or move any equipment, or otherwise disassemble or remove any component or accessory.

Should problems be identified during the survey or during performance of Services, Customer shall remedy such problems at its own cost before Hobart Service continues performing any Services.

8. TERM; CANCELLATION.

Unless otherwise specified in a Service Contract, the term of this Agreement shall begin on the date of Customer’s acceptance and shall continue until the end of the Call to which the Agreement covers.

Hobart Service may immediately terminate this Service Contract for cause if Customer becomes past-due on any invoices.

9. INDEMNITY.

Hobart Service agrees to indemnify Customer, its directors, officers, and employees from third-party claims, damages and expenses (including reasonable attorneys’ fees) to the extent those losses were directly caused by (i) the gross negligence or willful misconduct of Hobart Service or its employees,

(ii) Hobart Service’s failure to comply with applicable laws, or (iii) Hobart’s infringement of any third-party intellectual property rights. Notwithstanding the foregoing, Hobart Service shall have no duties under this Section where the Services or Parts have been modified by any party other than Hobart Service. Hobart Service does not indemnify Customer for any claims, damages or expenses (or legal expenses) to the extent caused by Customer’s (or its agent’s or employees’ or any third party’s) fault.

The above obligations are contingent upon (i) Customer supplying Hobart Service written notice of such claim immediately after the Customer has notice of such claim, (ii) Customer diligently cooperating with Hobart Service in the defense and settlement of such claim; and (iii) Customer allowing Hobart Service the full right to defend and settle such claim.

10. INSURANCE.

Hobart Service carries the following insurance: i) worker’s compensation meeting statutory requirements, ii) employer’s liability with limits of $1,000,000 per accident/ per disease, per employee/ per disease, policy limits, iii) commercial general liability including products and completed operations of $2,000,000 per occurrence, $4,000,000 aggregate, $4,000,000 products and completed operations aggregate with Customer as an additional insured per form U GL 11 75 D CW or replacement thereof,

iv) commercial auto liability with combined single limits of $1,000,000 per accident for owned, hired and non-owned vehicles. Hobart Service will provide evidence of insurance upon request of Customer.

Hobart Service may self-insure any coverage.

(Continue to next page) https://www.hobartservice.com/terms

LEGAL TERMS AND CONDITIONS

HOBART SERVICEGENER AL INFORM ATION

11. WARRANTY.

a. Hobart Service warrants to Customer that (i) it will perform the Services in a timely, competent and professional manner and in accordance with industry standards, (ii) during the Warranty Period, the Services shall conform to any specifications included in the Commercial Terms, (iii) the Parts shall be free of any liens, and (iv) during the Warranty Period, the Parts shall be free of material defects in workmanship and material.

b. “Warranty Period” means (i) with respect to Services defects, 24 Hours from completion of the Services with respect to any Services defect, and (ii) with respect to Parts defects, (x) other than in connection with Equipment installation, 90 days from original Part installation if installed by Hobart Service or from shipment if such Part is not installed by Hobart Service and (y) in connection with Equipment installation, 30 days from completion of the installation Services.

Delays in Equipment startup shall not extend any Warranty Period.

c. For new Equipment (excluding Parts): New equipment purchases are subject to separate terms and conditions as provided by the original equipment manufacturer. Hobart Service is not responsible for any claims related to the new equipment itself.

d. The above warranties (the “Warranty”) apply directly to Customer and may not be assigned.

Customer’s exclusive remedy, and Hobart Service ’s sole obligation, for a breach of the Warranty is for Hobart Service, at its option, to re-perform the Services, repair or replace the Parts, or credit Customer’s account for such defective Services or Parts. Hobart Service’s obligations herein are contingent upon (i) Customer making any claim under this Warranty during the Warranty Period,

(ii) such claim including detailed explanation of any alleged deficiencies, (iii) Hobart Service being given a reasonable opportunity to investigate all claims; and (iv) Hobart Service’s examination of such Parts or Services confirming the alleged deficiencies and that the deficiencies were not caused by accident, misuse, neglect, improper installation (other than by Hobart Service), unauthorized alteration or repair, or improper testing by Customer or a third party. EXCEPT AS SET FORTH ABOVE, HOBART SERVICE MAKES NO WARRANTY OR REPRESENTATION OF ANY KIND, EXPRESS OR IMPLIED (INCLUDING NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR

PURPOSE).

12. EXCLUSIONS.

Unless otherwise specified in a Service Contract, the following is not included in the scope of coverage and will be subject to additional charges at Hobart Rates: any repair costs (including labor, parts and travel expense) required due to (i) damage by fire, water, burglary, accident, abuse, intentional acts of destruction, acts of God or acts of terrorism, (ii) Customer’s failure to operate or maintain equipment in conformity with Hobart Service’s the manufacturer’s recommended operating and maintenance instructions, (iii) Customer’s inappropriate or improper use or improper cleaning, improper water conditions, Customer’s failure to maintain water treatment equipment, and the inappropriate or improper use or service by any third party and/or (iv) relocation, adjustment, repair, maintenance or service of the equipment by any Customer personnel or any third party without Hobart Service’s supervision or prior consent. Hobart Service shall have no obligation to provide Service or Parts for any equipment that is damaged due to any of the above causes until such equipment is repaired by Hobart Service and paid for by Customer at Hobart Rates. In addition, the following are not included and will be subject to additional charges: (a) Customer requested calibrations and/or adjustments to alter temperature or product appearance; (b) attachments; (c) accessories such as bowls, adapters, bowl trucks, attachment shelves, agitators (beaters, whips, dough hooks, etc.), splash covers and extension rings; (d) expendable items such as plastic flight links, curtains, blades, slicer knives, sharpening devices, pulley wipes, shredder plates, fryer baskets, customer removable seals, door gaskets; (e) consumable components or ordinary wear items including but not limited to; rinse arm strainers, final rinse nozzles, filters (including water filters), wash arm end caps, lower arm bushing, rollers, retaining rings, wash arm plugs, dish-limit rubber bumper, lamps, dish racks; (f) consumable items, such as paper supplies, filters, printing materials, and dishwashing and sanitizing compounds; (g) certain refrigeration Parts, such as condenser and evaporator coils, ice machine plates, refrigeration or HVAC motors 1hp or larger and compressors 1hp or larger, Flight Type dish machine conveyer assembly, refrigeration gasses (< lbs. or heat exchangers, (h) water related issues; (i) feature upgrades, including firmware, software, label format, or graphics; (j) welding services; (k) wireless DPAC network assembly; and (l) Customer network related issues for connected devices. Loaner equipment is not included but may be provided by local Branch Offices at additional cost based on availability. Repair, but not replacement, of fryer tanks, boiler and booster tanks that are subject to ITW/Hobart/Traulsen original manufacturer equipment is covered. Additionally, notwithstanding anything to the contrary contained herein or any Service Contract, Hobart Service reserves the right to refuse to provide replacement parts for or provide any Services with respect to any Equipment, or parts or components for Equipment, that is beyond its standard or recommended useful life (as determined by Hobart Service) (such date, the “End of Life”).

Hobart Service is not responsible for any losses, claims, damages or expenses related to Customer’s continued use of any Equipment, parts and/or components after its End of Life.

13. CONFIDENTIALITY.

Each party may obtain information that is of a proprietary or confidential nature of the other (“Confidential Information”). The recipient (“Recipient”) shall maintain the confidentiality of all Confidential Information of the provider (“Provider”). Recipient shall not disclose Provider’s Confidential Information except to its employees, affiliates or agents to the extent necessary for the performance of this Agreement. Such employees, affiliates and agents must be bound to a duty of confidentiality and non-use substantially similar to the one contained herein. Recipient shall be responsible for any breach by its employees, affiliates and agents. Each party further agrees not to use any of Provider’s Confidential Information other than in connection with the performance of this Agreement. “Confidential Information” does not include any information that: (a) is or becomes generally available to the general public (other than through breach of this section); (b) was known to Recipient prior to its receipt from Provider; (c) Recipient obtained from an independent third party who Recipient reasonably believes does not have an obligation of confidentiality to Provider; (d) is independently developed by Recipient without reference to the Confidential Information of Provider; or (e) is required to be disclosed pursuant to court order or other similar legal or governmental process. Upon Provider’s written request, Recipient shall destroy or return all Confidential Information and any copies thereof, except for digital copies that cannot be readily deleted and which are automatic back-up or archival server copies which shall be deleted in Recipient’s ordinary course of business, provided such digital copies shall remain subject to the terms herein until such destruction occurs. The parties agree that, in addition to any other relief allowed under this Agreement, by law or in equity, the Provider may seek injunctive relief in any court of competent jurisdiction for any breach of this section. The obligations of confidentiality and non-use contained herein will survive the Term for a period of 5 years.

14. CUSTOMER RESPONSIBILITIES.

For any on-Site Service, Customer shall (a) prepare the Site for the Services (and if the Site is not so prepared, Hobart Service may charge Customer for any delay and/or travel time at the Hobart Rates;

and if, in Hobart Service’s opinion, performance of Services would pose a safety risk, Hobart Service may refuse, without any liability, to provide Services and suspend Services or vacate all personnel from any Site and Customer shall be responsible for payment of the cost of any delay and/or travel time at Hobart Rates); (b) provide Hobart Service with at least 30 days’ written notice of any rules, laws and/or requirements applicable to the Services, including any required permits and licenses, that are applicable to Customer’s local jurisdiction; (c) provide at least 1 business day notice of cancellation of any Service order (and if no such notice is provided, Customer is responsible for any costs incurred by Hobart Service caused by such cancellation); and (d) remain liable for all damages or injuries caused by or contributed to by the negligent acts or willful misconduct of Customer, its employees, agents, invitees, and representatives that may occur on the site and indemnify Hobart Service for the same.

15. LIMITATION OF LIABILITY.

NEITHER PARTY WILL BE LIABLE FOR INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, OR FOR DOWN TIME, LOST PROFITS OR COMMERCIAL LOSSES, WHETHER OR NOT BASED UPON A PARTY’S NEGLIGENCE OR BREACH OF WARRANTY OR STRICT LIABILITY IN TORT OR ANY OTHER CAUSE OF ACTION. IN NO EVENT WILL EITHER PARTY’S LIABILITY UNDER THESE TERMS OR IN CONNECTION WITH THE SALE OF PARTS OR SERVICES EXCEED THE PURCHASE PRICE OF THE SPECIFIC PARTS OR SERVICES AS

TO WHICH THE CLAIM IS MADE.

16. HOBART SERVICE PERSONNEL.

Customer will not solicit or hire, directly or indirectly, any of Hobart’s employees that interacted with Customer while Hobart Service provides Services and/or Parts and for a period of 12 months after the conclusion of such Services. A Hobart Service employee’s response to a general advertisement not specifically targeting employees of Hobart Service shall not be deemed a violation of this Section.

17. MISCELLANEOUS.

(a) Additional terms from the local Branch Office may also apply to the Service Contract, and if applicable will be provided by the local Branch Office prior to sale. (b) Except for payment obligations, neither party will be responsible for failure to perform in a timely manner under the Agreement when such failure results from events beyond its reasonable control (each an “Event of Force Majeure”), including acts of God, acts of war, blockades, pandemic, labor disputes and Part shortages. For each Event of Force Majeure, the affected party’s time for performance will extend for such time as reasonably necessary to enable that party to perform. (c) Nothing in the Agreement or the course of dealing of the parties may be construed to create a partnership, joint venture, or agency or as authorizing either party to obligate the other in any manner. (d) The Agreement may not be assigned or transferred by Customer without Hobart Service’s prior written consent. (e) Any dispute related to the Agreement will be governed by and construed according to the laws of the state of Illinois and litigated exclusively in the state or federal courts of the state of Illinois. The parties hereto expressly release and waive any and all rights to a jury trial. The parties agree that the UN CISG will not apply to the Agreement. In any action concerning any provision of this Agreement, the prevailing party is entitled, in addition to the relief granted, to a reasonable sum for their reasonable and documented attorneys’ fees incurred, provided that if each party prevails in part, such fees will be allocated in the manner as the court determines to be equitable in view of the relative merits and amounts of the parties’ claims. (f) If any provision herein is held to be unlawful or unenforceable, the remaining provisions herein will remain in effect. (g) The Agreement constitutes the entire agreement between the parties and any of their affiliates with respect to the Services and Parts covered by the Agreement, and supersedes any prior agreements, understandings, representations and quotations with respect thereto.

RETURN GOODS POLICY & WARRANTY STATEMENT

HOBARTGENER AL INFORM ATION

RETURN GOODS POLICY

Hobart reserves the right to accept or reject return for credit requests for any Hobart items shipped as ordered. Any units or accessories accepted for return are subject to the prevailing restocking, reconditioning and freight charges in effect at time return is authorized. Absolutely no units or accessories will be accepted without formal authorization by the Company. Address all requests in writing to the Customer Care Department, Hobart, 701 S Ridge Avenue, Troy, Ohio 45374-0001.

WARRANTY

ITW Food Equipment Group LLC (“ITW FEG”) warrants new Hobart-branded products and certain other products sold by ITW FEG under other brand names whose specifications or other product documentation expressly reference this Warranty (collectively, the “Products”) to the original end-user of such Product (“Owner”) when installed within the United States, against defective material and workmanship for one (1) year from the date of original installation (the “Warranty Period”). In no event shall the Warranty Period commence later than 3 months from the date of initial delivery of the Product to the common carrier by ITW FEG unless otherwise agreed upon by ITW FEG in writing. ITW FEG will, as ITW FEG’s sole liability hereunder, and as the Owner’s exclusive remedy, during normal working hours, through one of its branches or authorized servicing outlets, repair or replace, at its option, including service and labor, all parts and/or components found to be defective and subject to this Warranty.

This Warranty is subject to reasonable travel limitations and costs as periodically updated by ITW FEG. Certain parts and components within the Products, expendable by nature and that need to be replaced frequently, are not covered by this Warranty. Any necessary repairs and/or replacements of these expendable parts are the Owner’s sole responsibility and cost.

This Warranty is conditioned upon ITW FEG receiving notice of any non-conformance subject to this Warranty within thirty (30) days of its discovery by Owner.

This Warranty does not apply to damage resulting from fire, water, burglary, accident, abuse, misuse, acts of God, attempted repairs or improper installation by unauthorized persons. Failure to follow use, care, or maintenance instructions in the Product’s Instruction Manual or in any other product documentation provided with the Product will automatically void this Warranty.

THIS WARRANTY EXCLUDES ALL ORAL, STATUTORY, EXPRESS OR IMPLIED WARRANTIES

WHICH MAY BE APPLICABLE TO ITW FEG, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED

WARRANTY OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE. ITW FEG

SHALL NOT BE LIABLE, AND OWNER WAIVES ALL CLAIMS AGAINST ITW FEG, FOR INDIRECT,

INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, DOWN TIME, LOST PROFITS

OR COMMERCIAL LOSSES, WHETHER OR NOT BASED UPON ITW FEG’s NEGLIGENCE OR

BREACH OF WARRANTY OR STRICT LIABILITY IN TORT OR ANY OTHER CAUSE OF ACTION.

ITW FEG WILL NOT BE LIABLE TO OWNER FOR ANY LOSS, DAMAGE, OR INJURY TO PERSONS

OR PROPERTY RESULTING FROM THE HANDLING, STORAGE, TRANSPORTATION, RESALE,

OR USE OF ITS PRODUCTS. IN NO EVENT WILL ITW FEG’s LIABILITY UNDER THIS WARRANTY

OR IN CONNECTION WITH ITS PRODUCTS OR SERVICES EXCEED THE PURCHASE PRICE

OF THE SPECIFIC PRODUCTS OR SERVICES AS TO WHICH THE CLAIM IS MADE. ITW FEG

neither assumes nor authorizes anyone else to assume for it any obligation or liability in connection with the Product, its sale, operation, or use, other than as stated herein.

EXCLUDED WARRANTY SERVICE

The following are not included in this Warranty, and ITW FEG shall have no obligation to Owner or anyone else for repair, replacement or refund with regard to any of the following.

Should someone request, and ITW FEG choose to provide such, services, additional charges shall apply. If Owner requests replacement parts and/or repair services under this Warranty and ITW FEG determines that such request is not covered hereunder (or fits under one of the following exclusions), Owner agrees to pay ITW FEG (or its affiliates or subcontractors) for all reasonable fees incurred in connection therewith at ITW FEG’s (or such affiliate’s or subcontractor’s) standard rates and charges as in effect at that time.

1. Expendable Parts. Parts and components that are expendable by nature or listed or referenced in any “Expendable Parts” table or list in any product documentation accompanying the Product are not covered by this Warranty, and any labor and/or travel charges related to the replacement of such parts are Owner’s responsibility.

2. Expedited Parts. For necessary replacement parts that are not available with the service technician at the time a warranty service call is made, ITW FEG will acquire such parts through ground freight. Owner may request expedited parts at its cost through next-day air shipment.

3. Accidental Damages. Calls resulting from physical damage by operators are not covered by this Warranty.

4. Water Quality Related Damages. Calls resulting from damage due to improper water conditions are not covered by this Warranty. Failures due to not properly cleaning the unit are not covered by this Warranty. Failure of Owner to provide proper water quality or water pressure to the Product as required by Product’s specifications and/ or Instructions Manual is not covered by this Warranty. Failure of Owner to maintain water treatment equipment is not covered by this Warranty.

5. After Hours and Weekend Emergency Coverage. This Warranty provides for replacement parts and repair services during normal business hours with commercially reasonable response times by ITW FEG. Owner is responsible for all fees stemming from emergency Calls received by ITW FEG on weekends, holidays, or Monday through Friday, between 5pm-8am local time.

6. Maintenance Inspections. Preventative or preemptive calls that identify potential service problems on a unit prior to occurrence are not covered by this Warranty.

7. Supply Lines. Opening or closing of, supply lines, valves, or switching of electrical supply current is not covered by this Warranty.

8. Adjustments. Adjustments to Product appearance requested by Owner are not covered by this Warranty.

9. Customer Feature Upgrades. Feature upgrades, including (nonmandatory) firmware, software, label format, or graphics, are not covered by this Warranty.

10. Customer Network. Customer network related issues for connected devices (when applicable) are not covered by this Warranty.

11. Commercial Use Only. ITW FEG does not recommend or authorize the use of any Product in a non-commercial application, including, but not limited to, residential use. This Warranty does not apply to, and shall not cover, any Product that is installed or used in any way in any residential or non-commercial application. No warranties, express or implied, are provided to any residential, consumer or non-commercial purchaser or owner of the Products.

EXPORT WARRANTY

Hobart’s standard warranty does not apply to Export Sales. Rather, for a period of one (1) year from date of original installation not to exceed eighteen (18) months from date of shipment from factory, Hobart:

n will replace, F.O.B. shipping point, shipping charges prepaid and add, any defective parts normally subject to warranty.

n will not cover the cost of any packing, freight, or labor; such costs being the sole responsibility of Dealer.

n There are no oral, statutory or implied warranties applicable to Hobart, including but not limited to any implied warranty of merchantability or fitness for any particular purpose which extend beyond the description on the face hereof.

n Dealer agrees to assume full responsibility for the installation and correction of Hobart products purchased for Export Sales, including all expenses.

EXTENDED WARRANTY CONTRACTS

WEIGHING & WRAPPING EQUIPMENTGENER AL INFORM ATION

EXTENDED WARRANTY CONTRACT IS EFFECTIVE JANUARY 1, 2024 (NOT APPLICABLE IN ALASKA OR HAWAII) For Extended Warranty Contracts to be applicable, contract must be purchased at the time of equipment sale.

For Extended Warranty Contract Terms and Conditions see page 13

MODEL ANNUAL

AMOUNT

HTI

HTi $317.00 HTiP $317.00

RETURN GOODS POLICY & WARRANTY STATEMENT

HOBART

6-7

FOOD PREPARATION EQUIPMENTGENER AL INFORM ATION

EXTENDED WARRANTY CONTRACT IS EFFECTIVE JANUARY 1, 2024 (NOT APPLICABLE IN ALASKA OR HAWAII) For Extended Warranty Contracts to be applicable, contract must be purchased at the time of equipment sale.

For Extended Warranty Contract Terms and Conditions see page 13

MODEL ANNUAL

AMOUNT

MIXERS

N50 $699.00

HL120 $699.00

HL200 $699.00

HL300 $699.00

HL400 $699.00

HL600 $1,043.00

HL662 $1,043.00

HL800 $1,043.00

HL1400 $1,043.00

MIXER ACCESSORIES

VS9 $567.00

SPIRAL MIXERS

HSL180 $868.00

HSL220 $868.00

HSL300 $868.00

HSL350 $868.00

HSU440 $868.00

FOOD CUTTERS

84145 $621.00 84186 $621.00

FOOD PROCESSORS

HCM61 $491.00

HCM62 $491.00

FP41 $491.00

FP100 $634.00

FP150 $634.00

FP250 $634.00

FP350 $634.00

FP400i $634.00

TENDERIZER

403 $515.00

PEELERS

6115 $1,134.00 6430 $1,134.00 6460 $1,134.00 6460M $1,134.00

CBT N/A

MODEL ANNUAL

AMOUNT

SALAD DRYERS

SDPE $604.00

SDPS $604.00

SLICERS

HS6 / HS6N $600.00

HS6-1PS $757.00

HS7 / HS7N $1,050.00

HS7-1PS $1,207.00

HS8 / HS8N $600.00

HS9 / HS9N $1,050.00

MEAT SAWS

6614 $824.00 6801 $824.00

6801-18IP $824.00

CUTTER MIXER

HCM450 $966.00

CHOPPERS

4812 $608.00 4822 $608.00 4732 $608.00 4732A $608.00

GRINDERS

4146 $639.00

MIXER GRINDERS

4246 $1,098.00

MG1532 $1,098.00

MG2032 $1,098.00