Bid Schedule.pdf

ATTACHMENT 2:

BID SCHEDULE

CLIN DESCRIPTION QUANTITY UNIT UNIT PRICE TOTAL

COST

0001 Remove Carpet Glue Down.

Remove existing product and prepare surface for application of new product in accordance with manufacturer’s specifications.

Dispose materials off base.

1 Each

0002 Remove Rubber Cove Base.

Remove existing product and prepare surface for application of new product in accordance with manufacturer’s specifications.

Dispose materials off base.

1 Each

0003 Remove Carpet Cove Base.

Remove existing product and prepare surface for application of new product in accordance with manufacturer’s specifications.

Dispose materials off base.

1 Each

0004 Remove Vinyl Tile.

Remove existing product and prepare surface for application of new product in accordance with manufacturer’s specifications.

Dispose materials off base.

1 Each

0005 Remove Sheet Vinyl.

Remove existing product and prepare surface for application of new product in accordance with manufacturer’s specifications.

Dispose materials off base.

1 Each

0006 Remove Double Stick Pad.

Remove existing product and prepare surface for application of new product in accordance with manufacturer’s specifications.

1 Each

Dispose materials off base.

0007 Remove Wood Base Board.

Remove existing product and prepare surface for application of new product in accordance with manufacturer’s

Each

0008 Remove Laminate Floor.

Remove existing product and prepare surface for application of new product in accordance with manufacturer’s

0009 Remove Ceramic Floor Tile and prepare surface for application of new product in accordance with manufacturer’s

0010 Remove Ceramic Cove Base and prepare surface for application of new product in accordance with manufacturer’s

0011 Remove Carpet Squares and prepare surface for application of new product in accordance with manufacturer’s

0012 Remove Commercial Stair Tread and prepare surface for application of new product in accordance with manufacturer’s

0013 Remove Commercial Stair Riser and prepare surface for application of new product in accordance with manufacturer’s specifications.

Dispose materials off base.

0014 Remove Commercial Stair Stringers Remove existing product and prepare surface for application of new product in accordance with manufacturer’s

0015 Broadloom Carpet Installation (Labor Only) Refer to AF IDIQ Carpet Ordering Guide for purchase of carpet material.

0016 Carpet-Broadloom Self Padded Installation (Labor Only) Refer to AF IDIQ Carpet Ordering Guide for purchase of carpet material.

0017 Carpet Squares Installation (Labor Only) Refer to Attachment 2 AF IDIQ Carpet Ordering Guide for

0018 Carpet Indoor/Outdoor Installed (Labor Only) Refer to AF IDIQ Carpet Ordering Guide for purchase of carpet material.

0019 Vinyl Composite Tile 12" X 12" Installed Armstrong Imperial Texture Standard Excelon or equal. 12 in Wide x 12 in Length Gauge: 1/8” ASTM F 1066 Class 2 - through-pattern ASTM E 648 Critical Radiant Flux Class I - 0.45 or more watts/cm2 ASTM E 662 Smoke Developed 450 or less Static Load Limit: ASTM F 970 125 psi

0020 Tile Grout Sealer Applied Apply DuPont™ StoneTech® Professional Grout Sealer or equal to grout joints in floor tile, taking care to protect baseboards and other adjacent surfaces. Clean excess sealer from tile surfaces.

0021 Quarry Tile Installed Quarry tile for floor and base will be domestic, standard grade, slip resistant by American Olean, Dal-Tile, Crossville, or Summitville Specification: ANSI A137.1.

ADAAG slip resistance coefficient of 0.6 on static surfaces and 0.8 on ramps, Thickness: ½” thickness Base will be cove, bull nose top 6" x 5" x ½" to match floor.

0022 Laminate Floor Installed Pergo Commercial Grade “Select” or equal Wear Resistant Rating: AC5 Resistance to Staining: Class 5 Laminate Thickness: 0.7 mm. Total Plank Thickness: 10mm.

0023 Laminate Trim Finish Sticks 8' Installed Install transitions, reducers, and other accessories needed to complete installation of laminate floor using products from the same manufacturer as the floor surface.

0024 Sheet Vinyl Installed Mannington Custom Spec II or equal Gauge: Overall Nominal Thickness -

- .085" Wear layer Thickness: .020" Average Weight: 3.8 lbs/s.y. Width:

12' Recommended Load Limit: Static Load Limit -- 100 p.s.i.

Reference Specifications: ASTM F- 1303-97 - Type I, Grade 1, Class A Traffic: Moderate Warranty: CustomSpec II Limited 5- Year Commercial Warranty. Limited 5-Year AquaLoc® Moisture Protection Warranty against Discoloration Caused by Alkali and Mildew.

0025 Cove Base Rubber 4" Installed Installation of rubber cove base on vertical surfaces, measured in linear feet. Unit price includes accessories items for inside and outside corners from same manufacturer.

Roppe 700 Series Rubber Wall Base or equal Type: TP Thermoplastic Rubber TPR 700 Series Base ASTM Specification: F- 1861 Height: 4” Thickness: 1/8”

0026 Binding Carpet Cove Base, 4" Installed (Labor Only) Refer to Attachment 2 AF IDIQ

0027 Ceramic Wall base Bullnose Installed 6" x 5" X 1/2" Install Wall base matching product used for floor area, with appropriate accessories at inside and outside corners.

0028 Stair Nosing Metal/Rubber Installed Roppe #204/206 or Equal Undercut/Double undercut stair nose Description: Heavy-duty for 1/4" and 5/16" carpet Type: TP Thermoplastic Rubber

0029 Wood Base Board 3"1/4 Installed Install Trimco Millwork Oak TM444 or equal on walls after installation of floor covering. Paint or stain to match.

0030 Wood 1/4 Round Installed Install Trimco Millwork Oak 3/4”x3/4” quarter round on walls, cabinets after installation of floor covering. Paint or stain to match.

0031 Carpet Plush, Installation (Labor

Refer to Attachment 2 AF IDIQ

0032 Reducer/ Metal or Rubber Installed Install Armstrong Commercial Floor products VT0 1/4" Carpet to 1/8" Tile Reducer or equal to provide a smooth transition between different height floor finishes.

0033 Thresholds Metal Installed

0034 Knapp Lock Metal Installed Install M-d Products 1-3/8" Aluminum Floor & Carpet Gripper With Teeth, Model #: 43886 or equal to provide a finished transition between carpet and other floor surfaces

0035 Commercial Stair Tread Installed Install Armstrong Floor Products STAIR TREAD, or equal, ASTM F 2169 Type TS, Class 2 (Supersedes FS RR-T-650 Composition A, Type 2) Low profile raised elements that have chamfered shoulders with sharply defined edges at the top. The solid color is uniform throughout the entire thickness of the tread, risers and tile.

Color pigments are insoluble in water, resistant to cleaning agents, and light.

0036 Commercial Stair Stringers Installed Install Roppe commercial grade stair stringer material of same thickness as risers, height and length after cutting to fit risers and treads and to cover stair stringers; produced by same manufacturer as treads and recommended by manufacturer for installation with treads.

0037 Carpet Border Installation (Labor

Refer to Attachment 2 AF IDIQ Carpet Ordering Guide for purchase of carpet material.

0038 Carpet Border Installation (Labor

Refer to Attachment 2 AF IDIQ Carpet Ordering Guide for purchase of carpet material.

0039 Trim Doors Trim bottom of wood/metal door, taking care to protect finish, to allow for thickness of new floor covering

0040 General Labor/ Floor Prep etc.

Provide labor proficient in the required tasks to perform tasks necessary to facilitate installation of new floor coverings.

0041 Burnish/Polish New VCT Prepare tile surface, apply manufacturer’s recommended commercial grade polish, and mechanically buff to a high gloss finish 0042 Moving light Furniture

Move and replace items such as lamps, trash cans, chairs, etc. under 75 lbs.

0043 Moving Heavy Furniture Move and replace items such as desks, bookcases, credenzas, etc.

over 75 lbs.

0044 Moving Systems Furniture Lift and replace one cubicle/workspace of systems furniture

0045 Cove Base Rubber 6" Installed Refer to Attachment 2 AF IDIQ

0046 Electrostatic Dissipative Tile 12" x 12" x 1/8" Armstrong Imperial Texture Standard Excelon or equal.

12 in Wide x 12 in Length Gauge:

1/8” ASTM F 1066 Class 2 - through-pattern