Bid No. 27-01 - Drawings - Church Corners Inn Abatement.pdf

PDF 4 MB Posted Jul 31, 2026

Attached to: Fitness Court
Solicitation number: 38268
Issued by: Connecticut

About this file

Written by GovTribe AI · Aug 3, 2026

This document consists of architectural drawings prepared by Christopher Williams Architects for the Town of East Hartford, Connecticut, detailing the abatement and limited interior demolition of the Church Corners Inn located at 860 Main Street, East Hartford, CT 06108. The project scope encompasses selective demolition work across five floors of the existing building, including removal of interior wall finishes, ceiling systems, flooring materials, radiators, and associated piping while preserving structural elements, exterior walls, and specific architectural features. The drawings include floor-by-floor demolition plans for the basement, first through fourth floors, and roof level, with detailed notations regarding which walls, finishes, and systems are to be removed or remain intact. The project is identified as Phase 1 of a larger renovation initiative, with drawings dated May 26, 2026, and prepared under Project No. 2508. The total building area encompasses approximately 27,997 square feet across all levels, with specific demolition areas quantified for plaster removal (68,618 square feet across interior and exterior walls) and floor and ceiling demolition (21,249 square feet total across all floors).

The drawings establish comprehensive demolition protocols requiring coordination with hazardous materials (HAZMAT) abatement specialists, with specific attention to the removal and proper disposal of pipe insulation, flue cement, gypsum board, ceiling tiles, and pipe gaskets in accordance with environmental regulations. The contractor is responsible for field verification of existing conditions prior to work commencement, temporary barricades and dust abatement measures, and off-site disposal of all demolition debris. The documents specify that electrical demolition must be performed by a state-licensed Connecticut electrician and that temporary OSHA-compliant lighting and power must be provided throughout the building during construction. Structural damage caused by demolition is the contractor's responsibility to repair at no additional cost to the owner. Key consultants include Bemis Associates (MEP Engineer), E2 Engineers (Structural Engineer), and Tight & Bond, with design coordination across multiple engineering disciplines documented on the cover sheet.

View the file

Other files

File	Type	Posted
28 Abbe Road Fitness Court Letter.pdf	PDF	Jul 31, 2026
38268_Aug_3_26_solicitation_doc.pdf	PDF	Jul 31, 2026
28 Abbe Road Fitness Court.pdf	PDF	Jul 31, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

CHRISTOPHER WILLIAMS ARCHITECTS

85 Willow Street New Haven, CT 06511 203 776 0184 cwarchitectsllc.com

ARCHITECTOWNER CIVIL ENGINEER &

ENVIRONMENTAL

CONSULTANTS

TOWN OF EAST HARTFORD

740 Main Street East Hartford, CT 06106

MEP ENGINEER

185 Main Street Farmington, CT 06032 860 667 3233 bemisassociates.com

BEMIS ASSOCIATES

210 Court Street Middletown, CT 06457 860 704 4760 tighebond.com

STRUCTURAL ENGINEER

488 Montauk Ave New London, CT 06320 860 437 3259 e2engineers.com

E2 ENGINEERSTIGHT & BOND

6/29/2026 1:14:24 PMAutodesk Docs://2508 East Hartford Church Corner Inn/2508 East Hartford Church Corner Inn - R24 - V2.rvt

5/26/2026

ABATEMENT & LIMITED

INTERIOR DEMOLITION

860 MAIN STREET

EAST HARTFORD, CT 06108

RENOVATION OF CHURCH CORNERS INN

CWA PROJECT NO: 2508

SHEET LIST

NO. SHEET NAME DE

O P

PHASE 1 COVER SHEET ●

G001 GENERAL ABBREVIATIONS & SYMBOLS ●

AD001 EXISTING CONST ASSEMBLIES ●

AD100 BASEMENT FLOOR DEMOLITION PLAN ●

AD101 FIRST FLOOR DEMOLITION PLAN ●

AD102 SECOND FLOOR DEMOLITION PLAN ●

AD103 THIRD FLOOR DEMOLITION PLAN ●

AD104 FOURTH FLOOR DEMOLITION PLAN ●

AD105 ROOF DEMOLITION PLAN ●

REF-1 ABATEMENT PLANS - BASEMENT, 1ST & 2ND FLOORS ●

REF-2 ABATEMENT PLANS - 3RD, 4TH FLOORS & ROOF ●

STANDARD ARCHITECTURAL ABBREVIATIONS

A A/C

AAP

ABAN

ABRSV

ACC

ACP

ACS DR

ACS PNL

ACSR

ACST

ACT

ACP

ADA

ADC

ADDL

ADJ

AFF

AFG

AFS

AHR

AHU

ALT

ALUM

ANOD

ANT

APC

APPROX

APT

ARCH

ARF

ASPH

ATC

ATCH

AUTO

AUX

AVG

AWN

AWT

BAF

BALC

BAT

BBR

BCL

BDRY

BEV

BFF

BITUM

BIT PVG

BKBD

BLDG

BLKHD

BLR

BLST

BLT

BLW

BOS

BOT

BRDG

BRG

BRLP

BRZ

BSMT

BTWN

BUR

C TO C

C&P

CAB

CAN

CANTIL

CATW

CAV

CBB

CCTV

CCW

CER

CFLG

CHBD

CHFR

CHMBR

CIR

CIRC

CISP

C.J.

CKBD

CLG

CLL

CLO

CLR

CLRM

CLT

CMU

Amphere Air Conditioning Alarm Annunciator Panel Anchor Bolt Abandon Abrasive Asphaltic Concrete, Alternating Current Accessible Asphaltic Concrete Paving Access Door Access Panel Aluminum Cable Steel Reinforced Acoustic Acoustical Ceiling Tile Acoustical Ceiling Panel Area Drain Americans with Disabilities Act Automatic Door Closer Additional Adjustable, Adjacent, Adjoining Above Finish Floor Above Finished Grade Above Finished Slab Anchor Air Handling Unit Alternate Aluminum Anodize Antenna Acoustic Panel Ceiling Approximate Apartment Architectural Architectural Finish Asphalt(ic) Acoustical Tile Ceiling Attachment Automatic Auxiliary Audio/Visual Average Architectural Woodwork Awning Acoustical Wall Treatment

Bottom of Bright Annealed Baffle Balcony Batten, Battery Baseboard, Bulletin Board Baseboard Radiator Between Centers, Bookcase Boom Closet Board Boundary Bevel Both Faces, Bottom Face Below Finish Floor Bituminous Bituminous Paving Backboard Baseline, Building Line Building Bulkhead Boiler Ballast Borrowed Light Below Beam, Benchmark Bottom of Steel Bottom Bedroom Bridging Bearing Burlap Bronze Both Sides Basement Bathtub Between Built-Up Built-Up Roofing Both Ways

Channel Center to Center Carpet and Pad Cabinet Canopy Cantilever Catwalk Cavity Catch Basin Cementitious (Backer) Board Closed Circuit Television Counterclockwise Ceramic Cubic Foot Counterflashing Corner Guard Chalk Board Chamfer Chamber Cast Iron, Cubic Inch Circle Circular Cast Iron Soil Pipe Control Joint Chalkboard Centerline Ceiling Contract Limit Line Closet Clear. Clearance Classroom Cleat Centimeter(s) Concrete Masonry Unit

CNCL

CND

CNR

CNTR

CNVR

COL

CONC

CONF

CONSTR

CONT

CONTR

COORD

COP

CORN

CORR

COV

COVPL

CPRS

CPT

CPVC

CRCMF

CRN

CRS

CSB

CSG

CSK

CSMT

CTSTN

CTD

CTR

CUB

CUH

CURT

DAP

DAT

DBL

DEG

DEMO

DEPT

DES

DET

DIA

DIAG.

DIAM

DIFF

DIM

DIR

DISC

DISP

DIV

DMPF

DMPR

DOM

DRCL

DRFR

DRLV

DSBL

DSPL

DTCH

DUPL

DWG

DWH

DWL

DWR

DWTR

ECC

EFS

EGB

EGSB

EHD

EIFS

ELAST

ELEC

ELEV

EMER

ENCL

ENTR

EOS

EPDM

EQUIP

ESC

ESCAL

ESMT

ETC

EWC

EWS

EXC

EXIST

EXP

EXT

Concealed Conduit Corner Counter Conveyor Cased Opening, Cleanout, Cut Out Column Concrete Conference Construction Continuous, Continue Contract, Contractor Coordinate Coping Cornice Corridor, Correct Cover Cover Plate Compressible Carpet Chlorinated Polyvinyl Chloride Circumference Crown Cold Rolled Steel Cast Stone Concrete Splashback Casing Countersunk Casement

Ceramic Tile, Connecticut Cut Stone Coated Center, Contour Copper, Cubic Cubicle Cabinet Unit Heater Curtain Clockwise, Cold Water Cubic Yard

Deep Duct Access Panel Datum Double Direct Current Degree Demolish, Demolition Department Designation Detail Drinking Fountain Double Hung Diameter Diagonal Diameter Diffuser Dimension Direction Disconnect Dispenser Divide Double Joist Dampproofing Damper Down Domestic

Dining Room, Door, Drain Door Closer Door Frame Door Louver Disable Disposal Drain Tile Detach Duplicate Dishwasher Drawing Domestic Water Heater Dowel(s) Drawer Dumbwaiter

East, Modulus of Elasticity Each Eccentric Each End Each Face, Exterior Finish Exterior Finish System Exterior Gypsum Board Exterior Gypsum Sheathing Board Electric Heater Electric Hand Dryer Exterior Insulation and Finish System Expansion Joint Elevation, Easement Line Elastomeric Electric, Electrical Elevator Emergency Enclosure Entrance Edge of Slab Electrical Panel, Panelboard Ethylene Propylene Diene Monomer Equal Equipment Escape, Escutcheon Escalator Easement And So Forth Each Way Electric Water Cooler Eye Wash Station Excavate Existing Expansion Exterior

F F/

FAAP

FAB

FCBRK

FCO

FDC

FDTN

FEC

FGL

FHC

FIG

FIN

FIXT

FLASH

FLDG

FLEX

FLMT

FLR

FLUOR

FOC

FOF

FOM

FOS

FOTK

FOW

FPL

FRA

FRMG

FRTW

FRZ

FTG

FTR

FURN

FUT

GALV

GDISP

GDR

GEN

GLZ

GMU

GRAN

GRDN

GROM

GRTG

GRV

GSB

GSU

GWT

GYM

GYP

GYP BD

GYP PLAS

HAZ

HCWD

HDR

HGR

HDWD

HDWR

HMD

HNDRL

HORIZ

HPDL

HST

HVAC

HVY

HYD

INCAN

INCL

IND

INSUL

INT

JAN

J.F.

JST

KIT

KPL

KWY

Female Face of Fire Alarm Fire Alarm Annunciator Panel Fabric Fire Code, File Cabinet Face Brick Floor Cleanout Floor Drain Fire Department Connection Foundation Fire Extinguisher Fire Extinguisher Cabinet Finish Floor (or) Face Fiberglass Fire Hose Cabinet Figure Finish, Finished Fixture Floorline Flashing Folding Flexible Flush Mount Floor Fluorescent Fence Finished Opening Face of Concrete Face of Finish Face of Masonry Face of Stud Fuel Oil Tank Face of Wall Fireproof, Flagpole Fireplace Fire Rating, Fire Resistant, Frame Fire Rated Assembly Framing Fire Rated Treated Wood Freezer Feet, Foot Footing Fin Tube Radiation Furnace, Furnish, Furniture Future

Gage, Gauge Galvanic, Galvanized Grab Bar, Gas Bibb Garbage Disposal Guard Rail Generator. General Galvanized Iron Glass Glazing, Glazed Glass Masonry Unit Granite Garden Grommet Grating Groove Gypsum Sheathing Board Glazed Structural Unit Grease Trap, Grout Glazed Wall Tile Gymnasium Gypsum Gypsum Board Gypsum Plaster

High Hazard Hose Bibb Handicap, Hollow Core, Heavy Duty Hollow Core Wood Door Header Hanger Hardwood Hardware Hollow Metal Hollow Metal Door Handrail Horizontal Heat Pump, Horse Power High Pressure Decorative Hand Sink, High Strength Hoist Height Heating, Ventilation, Air Conditioning Heavy Hydrant

Moment of Inertia Inside Diameter, Inside Dimension Inside Face Incandescent Included Independent Insulate, Insulation Interior Inside Radius Insect Screen, Island

Janitor Janitor's Closet Joint Filler Joist Joint

Knee Brace Kiln Dried, Knock Down Kitchen Knock Out Kickplate Keyway

L L&P

LAB

LAM

LAQ

LAT

LAU

LAV

LBS

LBL

LCL

LTG

LVR

MACH

MAINT

MAX

MBR

MDO

MED

MEMB

MEZZ

MFR

MIC

MID

MIN

MIRR

MISC

MIT

ML&P

MLDG

MLWK

MOD

MON

MTD

MTG

MTL

MULL

MULT

MWP

NAT

NCA

NIC

NICOP

NKL

NLB

NOM

NPL

O.C.

OF/CI

OFF

OPH

OPNG

OPP

OPQ

ORD

ORG

ORIG

ORN

PAF

PAR

PARG

PCC

PCCP

PCF

PCP

PED

PEJ

PERF

PERIM

PIV

PKG

PLAS

PLAT

PLBG

PLF

PLG

PLL

PLYWD

PMET

PNEU

Angle Lath and Plaster Laboratory Laminated Lacquer Lateral Laundry Lavatory Pounds Label Laundry Chute Linen Closet Living Room Light Lighting Low Voltage Louver

Meter Machine Maintenance Maximum Mail Box Master Bedroom Moment Connection Medium Density Overlay Medium, Medical Membrane Mezzanine Mill Finish Manufacturer Manhole Microwave Middle Minimum Mirror Miscellaneous Miter Metal Lath, Monolithic Metal Lath and Plaster Molding Millwork Millimeter Masonry Opening Modify, Module, Modular Monument (prop. line marker) Moisture Resistant Mop Sink Mounted Mounting Metal Mullion Multiple Microwave Membrane Waterproofing

North, New Not Applicable Natural Nickel Copper Alloy Not in Contract Nickel Copper Nickel Night Light Non-Loadbearing Number Nominal Nameplate, Nickel Plated No Scale

Overall On Center Outside Diameter, Outside Dimension Outside Face Owner Furnished/ Contractor Installed Office Overhang Opposite Hand Opening Opposite Opaque Outside Radius Overflow Roof Drain Organic Original Ornamental Ounce

Pole Public Address Power Actuated Fastener Parallel Parging Panel Board Precast, Portland Cement Precast Concrete Precast Concrete Pavement Pounds per Cubic Foot Portland Cement Plaster Photoelectric Pedestal Premolded Expansion Joint Perforated Perimeter Penthouse, Phase, Acid/alkaline Scale Pivot, Pivoted Package Property Line Plaster, Plastic Platform Plumbing Pounds per Linear Foot Piling Project Limit Line Plywood Painted Metal Part Number Pneumatic

PLN

POL

PORT

PRCST

PREFAB

PREFIN

PREFMD

PRI

PRIN

PRKG

PRMLD

PROP

PSI

PSF

PTD

PTN

PTR

PVC

PVG

PWR

QTB

QTR

QTY

RAB

RAD

RADN

RBM

RBR

RCP

RCPTN

REC

REF

REFR

REG

REINF

REM

REPL

REPRO

REQD

RESIL

REST

RET

REV

RFG

RFL

RHR

RLG

RND

ROW

RSD

RVL

RWL

SALV

SAN

SBSTR

SCHED

SCP

SCRN

SCT

SCWD

SDBL

SDG

SDL

SECT

SEP TNK

SGL

SHFT

SHR

SHRD

SHT

SHTHG

SHTR

SHV

SIM

SKLT

SLDG

SLNT

SLV

SLVT

SMLS

SMP

SND

SNDU

S&R

SNSR

SP EL

SPCL

SPH

SPKR

SPL

SST

STAG

STD

STIF

Panel Polished Portable Pair, Pipe Rail Precast Prefabricate Prefinished Preformed Primary Principal Parking Premolded Property Pounds per square Inch Pounds per square Foot Post Tensioned, Pressure Treated Painted, Paper Towel Dispenser Partition Paper Towel Receptacle Polyvinyl Chloride Paving Pass Window Power

Quarry Tile Quarry Tile Base Quarter Quantity

Radius, Riser Rabbeted Radiator Radiation Resilient Base Reinforced Brick Masonry Rubber Reflected Ceiling Plan Reception Road, Roof Drain Recessed Reference Refractory, Refrigeration Register Reinforce Removable Replace Reproduce Required Resilient Restroom Return Revision, Revised Roofing Reflected Right Hand, Roof Hatch Right Hand Reverse Roof Leader Railing Room Round Rough Opening Right of Way Rolling Steel Door Roof Ventilator Reveal Rainwater Leader

South, Supply Salvage Sanitary Splash Block Substrate Solid Core Schedule Scupper Screen Structural Clay Tile Solid Core Wood Door Smoke Detector, Soap Dispenser, Storm Drain Sandblast Siding Saddle Section Septic Tank Square Foot Single Shingles, Single Hung Shaft Shower Shower Drain Sheet Sheathing Shutter Shelf, Shelving Similar Skylight Sliding Sealant Sleeve Solvent Sheet Metal, Small, Smooth Seamless Sump Pump Sanitary Napkin Dispenser Sanitary Napkin Disposal Unit Supply & Return Sensor Sump Pit Spot Elevation Special Space Heater Speaker Spline Square Service Sink Stainless Steel Stairs, Street Staggered Standard Stiffener

STIR

STN

STOR

STR

STRM

STRUCT

SUB FL

SURF

SURV

SUSP

SVCE

SWR

SYM

SYMM

SYNTH

SYS

T T/O T&B T&G T/S

TAN

TDR

TEJ

TEL

TEMP

TER

TFF

THD

THK

THRESH

THRU

THROUT

TKBD

TMPD

TNL

TOB

TOC

TOFF

TOF

TOJ

TOM

TOP

TOS

TOW

TPD

TPH

TRANS

TRMBKL

TRTD

TYP

UCD

UGND

U/G

UNEX

UNFIN

UNIF

UNO

UTIL

VAN

VAR

VCO

VCT

VEH

VERT

VEST

VID

VIF

VNR

VOL

VAR

VRFY

VRNDA

VYL

W W/

W/O W/W

WBL

WBS

WCLR

WDF

WDP

WFAB

WFR

WFS

WGL

WSCT

WTR

WWF

Stirrup Strainer Storage Straight, Strike, Stringer Storeroom Structural Sub Floor Surface Survey Suspend, Suspended Service Sewer Symbol Symmetrical Synthetic System

Tread Top of Top and Bottom Tongue and Groove Tub and Shower Tangent Through Bolt, Towel Bar Terra Cotta Towel Dispenser, Trench Drain Towel Dispenser/ Receptacle Top Elevation Transverse Expansion Joint Telephone Temporary, Temperature Terrazzo Top of Finish Floor Thread Thickness Threshhold Through Throughout Tack Board Tempered True North Tunnel Top of_ Top of Beam Top of Concrete (or) Curb Top of Finish Floor Top of Frame Top of Joist Top of Masonry Top of Pavement, Top of Parapet Top of Slab (or) Steel Top of Wall Toilet Paper Dispenser Toilet Paper Holder Towel Rack Transom, Transparent Turnbuckle Treated Television Typical

Undercut Undercut Door Underground Underground Unit Heater Unexcavated Unfinished Uniform Unless Noted Otherwise

Utility Pole Urinal Utility Ultraviolet

Volt Vanity Varies Vacuum Cleaner Outlet Vinyl Composition Tile Vehicle Vertical Vestibule Video Verify in Field V Joint Veneer Volume Veneer Plaster, Vapor Retarder Verify Veranda Vinyl

West, Wall, Waste, Wide With Without Wall to Wall Wood Base Wood Blocking Wrought Brass Wall Covering, Water Closet Water Cooler Wood, Wood Door Wood Door and Frame Wood Paneling Wide Flange Wall Fabric Wood Frame Wood Furring Strips Wire Glass Wall Hung, Weep Hole Wrought Iron Where Occurs Waterproof, Weatherproof Weatherstrip Wainscot Watertight, Weight Water Welded Wire Fabric

TAG IDENTIFICATION

Access Doors & Frames

Access Flooring

Acoustic Ceiling Panels

Acoustical Ceiling Tiles

Architectural Woodwork Hardware, Finishes and Accessories

Conveying Equipment

Cold-Formed Metal Framing

Carpet Tile

Cast Stone Masonry

Ceramic Tile

Display Cases

Decorative Metal

Damp Proofing and Waterproofing

Equipment

Exterior Stone Cladding

Exterior Specialties

Fluid Applied Flooring

Furnishings

Fiberglass Reinforced Plastic

Food Service Equipment

Flashing and Sheetmetal

Fire and Smoke Protection

Gypsum Board Assemblies

Glazing

Gypsum Plastering

Gypsum Shaft Wall Assemblies

Glass Unit Masonry

Gypsum Veneer Plastering

Glazed Wall Systems

High Performance Coatings

Joint Protection

Linoleum Flooring

Manufactured Casework

Metal Fabrications

Membrane Roofing

Painting

Bases, Ballests and Paving

Portland Cement Plastering

Plumbing Fixtures

Planting

Plaster Restoration Systems

Partitions

Rugs and Mats

Resilient Floor Tile

Resilient Molding Accessories

Roof Specialties and Accessories

Resilient Stair Accessories

Resilient Sheet Flooring

Roofing and Siding Panels

Resilient Wall Base

Roof Windows and Skylights

Sheet Carpet

Specialty Doors and Frames

Stone Flooring

Site Improvements

Fixed Sound Absorbitve Panels

Acoustic Ceiling Suspension System

Safety Specialties

Staining & Transparent Finishing

Storage Specialties

Unit Masonry

Visual Display Surfaces

Wall Covering

Wall and Door Protection

Weather Barriers

Wood Flooring

Wood Products for Finish Carpentry and Architectural Woodwork

Window Treatments

ACCESS DOORS & FRAMES SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

HARDWARE, FITTINGS & ACCESSORIES

FOR ARCHITECTURAL WOODWORK SCHEDULE

EQUIPMENT SCHEDULE

COLD-FORMED METAL FRAMING SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

MASONRY PRODUCTS SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

SPECIALTIES SCHEDULE

METAL PRODUCTS SCHEDULE

THERMAL & MOISTURE PROTECTION SCHEDULE

EQUIPMENT SCHEDULE

MASONRY PRODUCTS SCHEDULE

SPECIALTIES SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

FURNISHINGS SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

FOOD SERVICE EQUIPMENT SCHEDULE

THERMAL & MOISTURE PROTECTION SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

GLAZING SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

MASONRY PRODUCTS SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

GLAZED WALL SYSTEMS SCHEDULE

MASONRY PRODUCTS SCHEDULE

THERMAL & MOISTURE PROTECTION SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

MANUFACTURED CASEWORK SCHEDULE

METAL PRODUCTS SCHEDULE

THERMAL & MOISTURE PROTECTION SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

EXTERIOR IMPROVEMENTS SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

PLUMBING FIXTURES & FITTINGS SCHEDULE

PLANTINGS SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

SPECIALTIES SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

THERMAL & MOISTURE PROTECTION SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

THERMAL & MOISTURE PROTECTION SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

ROOF WINDOWS AND SKYLIGHTS SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

SPECIALTY DOORS AND FRAMES SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

EXTERIOR IMPROVEMENTS SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

SPECIALTIES SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

SPECIALTIES SCHEDULE

MASONRY PRODUCTS SCHEDULE

SPECIALTIES SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

SPECIALTIES SCHEDULE

THERMAL & MOISTURE PROTECTION SCHEDULE

ARCHITECTURAL FINISHES SCHEDULE

FINISH CARPENTRY & ARCHITECTURAL

WOODWORK FINISH SCHEDULE

SPECIALTIES SCHEDULE

TAG TAG DESCRIPTION SCHEDULE

AD-X

AF-X

AP-X

ACT-X

AW-X

CE-X

CFM-X

CSM-X

CT-X

DC-X

DM-X

DWP-X

EQ-X

ESC-X

EXS-X

FAF-X

FRN-X

FRP-X

FSE-X

FSM-X

FSP-X

GB-X

GL-X

GP-X

GSW-X

GUM-X

GVP-X

GWS-X

HPC-X

JP-X

LF-X

P-X

PR-X

PT-X

RM-X

RS-X

WT-X

WP-X

WF-X

WB-X

WC-X

UM-X

SS-X

SF-X

SC-X

MCW-X

MP-X

MR-X

PAV-X

PCP-X

PF-X

PLT-X

RAM-X

RFT-X

RSA-X

RSF-X

RFP-X

RWB-X

RWS-X

SDF-X

SI-X

SOP-X

SSP-X

STF-X

SSP-X

VDS-X

WDP-X

CPT-X

DRAWING BLOCK IDENTIFIER

0' 4' 8' 12' drawing block scale when sheet is printed full size graphic scale drawing block location on sheet: 1st character (letter) and 2nd character (number) corresponds to letters running vertically and numbers running horizontally on sides of drawing area border

DIMENSION TYPES

GRAPHIC SYMBOLS

ANNOTATION

1 1/4" 1 1/4" VIF

architectural tick (slash) type terminators typically indicate dimensions to corners, edges such as faces of concrete, masonry, framing, casework, etc

CL type terminators typically indicate dimensions to centerlines of walls, columns, openings (doors etc), fixtures and equipment

Verify Dimension in Field -dimension is dependent on existing conditions, product or equipment size, etc.

IRON OR STEEL ALUMINUM

CONCRETE UNIT

MASONRY

RUBBER OR

PLASTIC (RESILIENT

MATERIALS AND

SPECIALTIES)

EARTH (FILL) SAND, GROUT,

STONE, DUST OR

ENGINEERED FILL

BLANKET

INSULATION

STRUCTURAL &

MISCELLANEOUS

CARPENTRY, WOOD

BLOCKING

FINISH WOOD

SHAPES

VENEER CORE

PLYWOOD

METAL

EARTH

(UNDISTURBED)

CONCRETE

UNIT

MASONRY

CLAY UNIT

MASONRY,

STONE, STONE

TILE, CERAMIC

TILE

BRASS OR

BRONZE

RIGID

INSULATION

BLANKET

INSULATION

FINISH WOOD

SHAPES

GLASS

GYPSUM

BOARD

PARTICLE BOARD

AND PARTICLE

CORE PLYWOOD

MDF OR HDF

SHEET, MDF OR

HDF CORE

PLYWOOD

ACOUSTIC

PANELS

PORTLAND

CEMENT OR

GYPSUM PLASTER

lath where applicable

GYPSUM

BOARD

veneer plaster substrate

LAMINATED

VENEER LUMBER

STRUCTURAL AND

MISCELLANEOUS

CARPENTRY, WOOD

BLOCKING

single diagonal line inidicates intermittent element

EXTRUDED

SHAPE: METAL

outline with solid black hatch

EXTRUDED

SHAPE: PLASTIC

OR RUBBER

outline with solid grey hatch

HATCH PATTERNS - PLANS AND SECTIONS

GRAPHIC SYMBOLS

MATERIALS

NEW CONCRETE

OR PORTLAND

CEMENT PLASTER

NEW GYPSUM

PLASTER OR

GYPSUM

BOARD

RIGID INSULATION

GRAVEL OR

POROUS BASE

(used where required for clarity)

FINISH

CARPENTRY OR

ARCHITECTURAL

WOODWORK

(used where required for clarity)

- or -

ACOUSTIC

PANEL OR TILE

CEILING

SYSTEM

suspension grid

ACOUSTIC

PANEL OR TILE

CEILING

SYSTEM

EXISTING

ACOUSTIC

PANEL OR TILE

CEILING SYSTEM

existing suspension grid

NEW ACOUSTIC

PANEL OR TILE

CEILING SYSTEM

existing suspension grid

CLAY UNIT

MASONRY OR

GENERIC NEW

MASONRY

STONE,

REFRACTORIES,

STONE OR

CERAMIC TILE

GLASS OR

MIRROR

TACK BOARDS

OR FABRIC

COVERED

PANELS

CONCRETE

HATCH PATTERNS - DETAILS

GRAPHIC SYMBOLS SITE

EXISTING SPOT ELEVATION

SPOT ELEVATION, BOTTOM OF

CURB

SPOT ELEVATION

BOTTOM OF WALL

MATCH EXISTING GRADE

PARKING TURNING ARROW

STRAIGHT DIRECTION ARROW

STRAIGHT AND TURN ARROW

CATCH BASIN

ROUND CATCH BASIN

SANITARY CLEANOUT

CORE DRILL HOLE DRILLED

CORE DRILL HOLE UNDRILLED

STORM DRAINAGE MANHOLE

FUEL OIL METER

FUEL OIL MANHOLE

FUEL OIL VAULT

GREASE TRAP

GRIT CHAMBER

GAS METER

NATURAL GAS MANHOLE

GAS RECIEVER

GAS TRAP

GAS VALVE VAULT

HANDICAP SYMBOL

HYDRANT

US HIGHWAY SYMBOL

STATE HIGHWAY SYMBOL

MONITORING WELL

PHOTO CONTROL POINT

POST INDICATOR VALVE

PUMP STATION

REGULATOR VALVE

RAIL SIGNAL

SIGN

SANITARY MANHOLE

SANITARY METER

SANITARY VALVE VAULT

SEPTIC TANK

STEAM PIT

TIDE GAGE

TIRE TREDDLE

TANK (BELOW GROUND)

VERTICAL CONTROL POINT

WATER HANDHOLE

WATER METER

WATER SOFTENER

WATER VALVE VAULT

LIGHT POLE

UTILITY POLE

PARKING METER

SPOT ELEVATION, BOTTOM OF

STEPS

SPOT ELEVATION, TOP OF

FINISH FLOOR

SPOT ELEVATION, TOP OF CURB

SPOT ELEVATION, TOP OF STEPS

SPOT ELEVATION, TOP OF WALL

HORIZONTAL CONTROL POINT

HORIZONTAL VERTICAL CONTROL

POINT

INTERSTATE HIGHWAY SYMBOL

SANITARY PRESSURE VESSEL

TANK (HORIZONTAL ABOVE GROUND)

TANK (VERTICAL ABOVE GROUND)

TRAFFIC ARM WITH CARD READER

TRAFFIC ARM MECHANICAL SWING

INDUSTRIAL WASTE WATER METER

INDUSTRIAL WASTE WATER MANHOLE

X (0.00) x 0.00 xBC 0.00 xBS 0.00 xBW 0.00 xFF 0.00 xMEG xTC 0.00 xTS 0.00 xTW 0.00

R R

OWNER

SHEET TITLE

CHK'D BY:

DRAWN BY:

PROJECT NO:

CWA PROJECT NO.:

ARCHITECT

5 4 3 2 1

CHRISTOPHER WILLIAMS ARCHITECTS, LLC

85 Willow Street 203 776 0184

New Haven, CT 06511 www.cwarchitectsllc.com

ENGINEERS

5 4 3 2 1

860 MAIN STREET

EAST HARTFORD,

CT 06108

Autodesk Docs://2508 East Hartford Church Corner Inn/2508 East Hartford Church Corner Inn - R24 - V2.rvt 6/29/2026 1:23:39 PM

G001

GENERAL

ABBREVIATIONS &

SYMBOLS

ABATEMENT & LIMITED INTERIOR

DEMOLITION

5/26/2026

RENOVATION OF

CHURCH

CORNERS INN

MARK DATE DESCRIPTION

REMOVE PLASTER ON WD LATH (ACTUAL

THICKNESS VARIES)

EXIST 4" WD STUDS ASSUME SPACING

16" OC

BASE

TOP

REMOVE AND SALVAGE EXIST WD BASE

EXIST BASE/FLR CONDITIONS VARY- 2X

CONT WD PLATE TO REMAIN

EXIST CLG VIF 2X TOP PLATE TO REMAIN

REMOVE WD LATH

EXIST 8" THICK MULTI-WYTHE BRICK

WALL TO REMAIN

BASE

TOP

REMOVE PLASTER ON WD LATH (ACTUAL

THICKNESS VARIES)

REMOVE 7/8" THICK WD FURRING STRIPS

REMOVE AND SALVAGE EXIST WD BASE

REMOVE GYP BD OVERLAY-EXTENT &

THICKNESS VARIES

EXIST WD FLR JOISTS ACTUAL

SIZE & SPACING VARIES TO

REMAIN

EXIST T&G WD SUBFLOOR TO

REMAIN

REMOVE FIN FLOORING & UNDERLAYMENT DOWN

TO SUBLOOR. FLOORING SYSTEMS INCLUDE:

1 TONGUE & GROOVE STRIP FLRG APPLIED

DIRECTLY TO THE SUBFLOOR.

2. TONGUE & GROOVE FLOORING ON SUBFLOOR

WITH PLYWD UNDERLAYMENT WITH CARPET OR

RESILIENT FINISH FLOORING.

3. CERAMIC TILE ON MORTAR SETTING BED ON

SUBFLOOR.

REMOVE CEILING FINISHES DOWN TO STRUCTURE.

CEILING FINISHES INCLUDE THE FOLLOWING:

1. WOOD FURRING, WOOD LATH & PLASTER, WITH

OR WITHOUT GYP BD OVERLAY

2. WOOD LATH & PLASTER WITH OR WITHOUT GYP

BD OVERLAY.

3. GYP BD, 1 OR 2 LAYERS APPLIED DIRECTLY TO

THE WOOD FLOOR JOISTS

APPLY 1/4" GYP BD OVERLAY

PER CONST DWGS

EXIST BRICK EXTERIOR WALL

7/8" WD FURRING STRIPS TO REMAIN

EXIST PLASTER ON WD LATH FIN TO REMAIN

EXIST WD BASE TO BE REMOVED AND

REINSTALLED ON 1/4" GYP

REMOVE FLR FIN TO SUBFLR PER

CONST DWGS

EXIST WD FLR JOISTS TO REMAIN

ALTERATION & DEMOLITION NOTES

1. THE FOLLOWING NOTES APPLY TO ALL WORK AND DRAWINGS IN PROJECT SCOPE.

2. EXERCISE CARE NOT TO DAMAGE EXISTING BUILDING ELEMENTS AND FINISHES TO REMAIN DURING CONSTRUCTION. IN THE EVENT THAT DAMAGE DOES OCCUR PATCH/REPAIR OR REPLACE DAMAGED

ELEMENTS OR FINISHES IN KIND AND/OR TO MATCH EXISTING.

3. PROVIDE TEMPORARY BARRICADES, ENCLOSURES, AND DUST ABATEMENT AS REQUIRED BY OWNER

ABATEMENT DOCUMENTS.

4. THE PREMISES SHALL BE KEPT FREE FROM ACCUMULATION OF TRASH AND CONSTRUCTION DEBRIS AT ALL TIMES. DISPOSE OF EXCESS TRASH AND DEBRIS OFF-SITE IN A SAFE, ACCEPTABLE MANNER.

5. FIELD VERIFY EXISTING CONDITIONS AND DIMENSIONS PRIOR TO COMMENCEMENT OF WORK. REPORT

ANY DISCREPANCIES TO ARCHITECT PRIOR TO PROCEEDING.

6. DIMENSIONS INDICATED ON DRAWINGS ARE TO BE USED FOR CONSTRUCTION. DO NOT SCALE DRAWINGS

EXCEPT FOR ESTIMATING & APPROXIMATION PURPOSES.

7. FIELD VERIFY ALL (±) AND (V.I.F) DIMENSIONS PRIOR TO START OF WORK. REPORT ANY DISCREPANCIES

THAT WILL AFFECT NEW WORK TO ARCHITECT PRIOR TO PROCEEDING.

8. IF INFORMATION ON DRAWINGS IS UNCLEAR OR ADDITIONAL DIMENSIONS ARE REQUIRED, NOTIFY

ARCHITECT PRIOR TO PROCEEDING WITH WORK.

9. THE TERM "TYPICAL" OR "TYP" INDICATED ON THE CONTRACT DOCUMENTS SHALL MEAN THAT THE

CONDITION IS THE SAME OR SIMILAR THROUGHOUT UNLESS OTHERWISE INDICATED.

10. COORDINATE WITH AUTHORITIES HAVING JURISDICTION AND PROVIDE ALL REQUIRED TEMPORARY FIRE

AND LIFE SAFETY PROVISIONS DURING CONSTRUCTION.

11. PROVIDE PORTABLE FIRE EXTINGUISHERS DURING CONSTRUCTION AS REQUIRED BY CODE AND

AUTHORITY HAVING JURISDICTION. THESE NOTES APPLY TO ALL CONTRACT DRAWINGS.

12. UNLESS INDICATED OTHERWISE, KEYNOTES INCLUDED ON THE DEMOLITION DRAWINGS ARE TYPICAL AND

APPLY TO ALL SIMILAR CONDITIONS THROUGHOUT.

13. REMOVAL INCLUDES FASTENERS, EMBEDMENTS, ACCESSORIES ETC. ASSOCIATED WITH THE PARTICULAR

ITEM INDICATED TO BE REMOVED OR DEMOLISHED.

14. UPON REMOVALS, INSPECT FOR SUBSTRATE DAMAGE, WHETHER PRE-EXISTING OR CAUSED BY DEMOLITION. DOCUMENT, MEASURE AND REPORT SUBSTRATE DAMAGE TO THE ARCHITECT/OWNER.

15. REPAIR ANY SUBSTRATE OR STRUCTURAL DAMAGE. DAMAGE CAUSED BY DEMOLITION AT NO ADDITIONAL

COST TO THE OWNER.

16. REMOVAL AND DEMOLITION INCLUDES THE LEGAL OFF-SITE DISPOSAL OF ALL PRODUCTS OF DEMOLITION

AND REMOVALS.

17. NOTWITHSTANDING THE NOTE ABOVE, ALL ELECTRICAL DEMOLITION AND REMOVALS SHALL BE MADE

SAFE BY A STATE OF CT. LICENSED ELECTRICIAN.

18. THE ELECTRICAL CONTRACTOR SHALL PROVIDE OSHA & CODE COMPLIANT TEMPORARY LIGHTING

THROUGHOUT THE BUILDING DURING THE ENTIRE COURSE OF CONSTRUCTION.

19. THE ELECTRICAL CONTRACTOR SHALL PROVIDE OSHA & CODE COMPLIANT TEMPORARY POWER WITHIN THE BUILDING DURING THE ENTIRE COURSE OF CONSTRUCTION. COORDINATE LOCATIONS & CAPACITY

WITH THE PRIME CONTRACTOR.

20. THE GENERAL CONTRACTOR SHALL COORDINATE DEMOLITION & REMOVALS WORK WITH HAZMAT

ABATEMENT. THE SCOPE IS DEFINED IN THE HAZMAT SPECIFICATIONS.

OWNER

SHEET TITLE

CHK'D BY:

DRAWN BY:

PROJECT NO:

CWA PROJECT NO.:

ARCHITECT

5 4 3 2 1

CHRISTOPHER WILLIAMS ARCHITECTS, LLC

85 Willow Street 203 776 0184

New Haven, CT 06511 www.cwarchitectsllc.com

ENGINEERS

5 4 3 2 1

860 MAIN STREET

EAST HARTFORD,

CT 06108

Autodesk Docs://2508 East Hartford Church Corner Inn/2508 East Hartford Church Corner Inn - R24 - V2.rvt 6/29/2026 1:16:50 PM

AD001

EXISTING CONST

ASSEMBLIES

ABATEMENT & LIMITED INTERIOR

DEMOLITION

5/26/2026

RENOVATION OF

CHURCH

CORNERS INN

1 1/2" = 1'-0"D2 TYP EXISTING INTERIOR PARTITION DEMO

1 1/2" = 1'-0"C2 EXISTING INTERIOR MAS PARTITION DEMO

1 1/2" = 1'-0"B2 EXIST FLOOR ASSEMBLY DEMO

1 1/2" = 1'-0"A2 EXIST EXT WALL DEMO

0' 2'6" 1'

A201 C5

A201A5

A202

F2.01

F2.03

F2.03 F2.03

F2.03

F2.03 F2.03 F2.03 F2.03

F2.03

F2.02

012A Room

STOR

S011

STAIR

STOR

BOILER RM

STOR

S01

STAIR

STOR

ELECTRICAL

STOR

UNASSIGNED

STOR

1. REFER TO HAZARDOUS MATERIALS (HAZMAT) DRAWINGS AND ALL APPLICABLE

ENVIRONMENTAL REPORTS FOR ABATEMENT PROTOCOLS PRIOR TO THE START OF

DEMOLITION.

2. THESE NOTES AND DRAWINGS ARE BASED ON VISUAL OBSERVATIONS FROM A 3D

SCAN CONDUCTED ON 5/23/2025. CURRENT FIELD CONDITIONS MAY VARY.

3. INTERIOR WALLS: DEMOLISH AND REMOVE ALL INTERIOR WALL FINISHES DOWN TO

THE BARE STUDS.

4. EXTERIOR WALLS: THE INTERIOR FINISHES ON THE INSIDE FACE OF ALL EXTERIOR

PERIMETER WALLS ARE TO REMAIN INTACT. PROTECT DURING INTERIOR

DEMOLITION. CUT AWAY INTERIOR WALL FINISHES FROM EXTERIOR WALLS WITH A

STRAIGHT, NEAT CUT ON THE INSIDE CORNER.

5. CEILINGS: DEMOLISH AND REMOVE ALL CEILING FINISHES AND FURRING, DOWN TO

THE EXPOSED OVERHEAD JOISTS.

6. FLOORS: DEMOLISH AND REMOVE FLOORING FINISHES AND UNDERLAYMENT IN

THEIR ENTIRETY, DOWN TO SUBFLOORING. UNDERLAYMENT AND EXIST FLOORING

CONDITIONS VARY THROUGHOUT THE BUILDING (MAY INCLUDE PLYWOOD, TONGUE

AND GROOVE WOOD FLOORING, VINYL TILE, ETC.). WHERE FLOOR DEMOLITION IS

INDICATED IN SPECIFIC ROOMS, THE INTENT IS TO REMOVE THE VISIBLE TOP LAYER

OF FLOORING ALONG WITH ALL CONCEALED UNDERLAYMENT LAYERS DOWN TO THE

EXISTING SUBFLOOR.

7. RADIATORS: DEMOLISH AND REMOVE ALL RADIATORS AND ASSOCIATED PIPING.

CONTRACTOR SHALL VERIFY EXACT QUANTITIES IN THE FIELD; ALLOW FOR A 20%

VARIANCE IN TOTAL QUANTITY UP OR DOWN.

8. MATERIAL KEYNOTES IN EACH ROOM MAY VARY FROM ACTUAL FIELD CONDITIONS.

ALL REMOVALS AND DEMOLITION SHALL BE INCLUDED IN THIS WORK.

SELECTIVE DEMOLITION NOTES

WALL TO REMAIN-REMOVE FINISHES

AND BASEBOARD

WALL TO BE DEMOLISHED UNDER LATER

PHASE-REMOVE ALL FINISHES &

BASEBOARD

REMOVE DOOR & FRAME

DEMO LEGEND

OWNER

SHEET TITLE

CHK'D BY:

DRAWN BY:

PROJECT NO:

CWA PROJECT NO.:

ARCHITECT

5 4 3 2 1

CHRISTOPHER WILLIAMS ARCHITECTS, LLC

85 Willow Street 203 776 0184

New Haven, CT 06511 www.cwarchitectsllc.com

ENGINEERS

KEYNOTES

1. The intent of the Contract Documents is to include all items necessary for the proper execution and completion of all Work by the Contractor. The Contract Documents are complementary, and what is required by one shall be as binding as if required by all. Where a conflict within the Contract Documents exists, the Contractor shall provide the better quality or greater quantity of work in accordance with the Architect's resolution without any increase in the Contract sum.

Organization of the Specifications into divisions, sections and articles, and arrangement of sheets shall not control the Contractor in dividing the work among subcontractors, or in establishing the extent of Work to be performed by any trade.

2. REFERENCE KEY NOTES and SHEET KEY NOTES are intended to indicate and clarify the extent and requirements of the Work; they do not indicate every location or occurence of required Work. The lack of a key note to an individual item of Work will not relieve the Contractor of responsibility to execute that Work as part of the Contract when the requirement for that Work can be logically inferred by other parts of the Contract Documents

3. Do not scale drawings, except for estimation and approximation purposes.

4. This is an existing building; all conditions and critical dimensions must be field verified.

5 4 3 2 1GENERAL NOTES

860 MAIN STREET

EAST HARTFORD,

CT 06108

Autodesk Docs://2508 East Hartford Church Corner Inn/2508 East Hartford Church Corner Inn - R24 - V2.rvt 6/29/2026 1:17:52 PM

AD100

BASEMENT FLOOR

DEMOLITION PLAN

ABATEMENT & LIMITED INTERIOR

DEMOLITION

5/26/2026

RENOVATION OF

CHURCH

CORNERS INN

1/8" = 1'-0"A5 BASEMENT DEMOLITION PLAN TRUE

0' 4' 8' 16' 24'

F2.01 REMOVE AND DISPOSE PIPE INSULATION. REFER

TO HAZMAT DOCUMENTATION.

F2.02 REMOVE AND DISPOSE FLUE CEMENT. REFER TO

HAZMAT DOCUMENTATION.

F2.03 REMOVE AND DISPOSE GYPSUM BOARD. REFER

TO HAZMAT DOCUMENTATION.

MARK DATE DESCRIPTION

GROSS AREA PER FLR

LEVEL AREA

BASEMENT 5183 SF

FIRST FLOOR 6436 SF

SECOND FLOOR 5364 SF

THIRD FLOOR 5505 SF

FOURTH FLOOR 5509 SF

27997 SF

FLOOR AREAS ARE MEASURED TO THE INSIDE FACE OF

EXTERIOR WALLS.

PLASTER DEMO AREAS

TYPE OF WALL

AREA

(SF)

# OF PLASTER

SIDES

TOTAL AREA

(SF)

BASEMENT

INTERIOR WALL 2884 SF 2 5768 SF

FIRST FLOOR

CHASE WALL 603 SF 1 603 SF

EXTERIOR WALL 2908 SF 1 2908 SF

INTERIOR WALL 4757 SF 2 9515 SF

SECOND FLOOR

CHASE WALL 73 SF 1 73 SF

EXTERIOR WALL 3626 SF 1 3626 SF

INTERIOR WALL 6417 SF 2 12834 SF

THIRD FLOOR

CHASE WALL 96 SF 1 96 SF

EXTERIOR WALL 3562 SF 1 3562 SF

INTERIOR WALL 6571 SF 2 13143 SF

FOURTH FLOOR

CHASE WALL 97 SF 1 97 SF

EXTERIOR WALL 3540 SF 1 3540 SF

INTERIOR WALL 6427 SF 2 12853 SF

41561 SF 68618 SF

FLOOR AND CEILING DEMO AREA

FLOOR AREA SF COMMENT

BASEMENT 496 SF CEILING ONLY

FIRST FLOOR 5689 SF FLR & CEILING

SECOND FLOOR 5133 SF FLR & CEILING

THIRD FLOOR 5308 SF FLR & CEILING

FOURTH FLOOR 5023 SF FLR & CEILING

UP DN

MEN'S RESTROOM

CORRIDOR

VESTIBULE

UNASSIGNED

TOILET

101B

UNASSIGNED

BAR

CORRIDOR

105B

STOR

LOUNGE

104A

JAN

KITCHEN

WOMEN'S RESTROOM

190S

STAIR

191S

STAIR

192S

STAIR

UNASSIGNED

105A

STOR

TOILET

101A

VESTIBULE

BAR

A201 C5

A201A5

A202

F2.04

F2.06

F2.11

F2.10

C4.02

C4.01

C4.02

C4.05

C4.01

C4.05 C4.03

C4.05

C 4.

02 C 4.

C 4.

C4.05

C4.02

C 4.

C4.02

C4.05

C4.02 C4.02

1. REFER TO HAZARDOUS MATERIALS (HAZMAT) DRAWINGS AND ALL APPLICABLE

ENVIRONMENTAL REPORTS FOR ABATEMENT PROTOCOLS PRIOR TO THE START OF

DEMOLITION.

2. THESE NOTES AND DRAWINGS ARE BASED ON VISUAL OBSERVATIONS FROM A 3D

SCAN CONDUCTED ON 5/23/2025. CURRENT FIELD CONDITIONS MAY VARY.

3. INTERIOR WALLS: DEMOLISH AND REMOVE ALL INTERIOR WALL FINISHES DOWN TO

THE BARE STUDS.

4. EXTERIOR WALLS: THE INTERIOR FINISHES ON THE INSIDE FACE OF ALL EXTERIOR

PERIMETER WALLS ARE TO REMAIN INTACT. PROTECT DURING INTERIOR

DEMOLITION. CUT AWAY INTERIOR WALL FINISHES FROM EXTERIOR WALLS WITH A

STRAIGHT, NEAT CUT ON THE INSIDE CORNER.

5. CEILINGS: DEMOLISH AND REMOVE ALL CEILING FINISHES AND FURRING, DOWN TO

THE EXPOSED OVERHEAD JOISTS.

6. FLOORS: DEMOLISH AND REMOVE FLOORING FINISHES AND UNDERLAYMENT IN

THEIR ENTIRETY, DOWN TO SUBFLOORING. UNDERLAYMENT AND EXIST FLOORING

CONDITIONS VARY THROUGHOUT THE BUILDING (MAY INCLUDE PLYWOOD, TONGUE

AND GROOVE WOOD FLOORING, VINYL TILE, ETC.). WHERE FLOOR DEMOLITION IS

INDICATED IN SPECIFIC ROOMS, THE INTENT IS TO REMOVE THE VISIBLE TOP LAYER

OF FLOORING ALONG WITH ALL CONCEALED UNDERLAYMENT LAYERS DOWN TO THE

EXISTING SUBFLOOR.

7. RADIATORS: DEMOLISH AND REMOVE ALL RADIATORS AND ASSOCIATED PIPING.

CONTRACTOR SHALL VERIFY EXACT QUANTITIES IN THE FIELD; ALLOW FOR A 20%

VARIANCE IN TOTAL QUANTITY UP OR DOWN.

8. MATERIAL KEYNOTES IN EACH ROOM MAY VARY FROM ACTUAL FIELD CONDITIONS.

ALL REMOVALS AND DEMOLITION SHALL BE INCLUDED IN THIS WORK.

SELECTIVE DEMOLITION NOTES

WALL TO REMAIN-REMOVE FINISHES

AND BASEBOARD

WALL TO BE DEMOLISHED UNDER LATER

PHASE-REMOVE ALL FINISHES &

BASEBOARD

REMOVE DOOR & FRAME

DEMO LEGEND

OWNER

SHEET TITLE

CHK'D BY:

DRAWN BY:

PROJECT NO:

CWA PROJECT NO.:

ARCHITECT

5 4 3 2 1

CHRISTOPHER WILLIAMS ARCHITECTS, LLC

85 Willow Street 203 776 0184

New Haven, CT 06511 www.cwarchitectsllc.com

ENGINEERS

KEYNOTES

3. Do not scale drawings, except for estimation and approximation purposes.

4. This is an existing building; all conditions and critical dimensions must be field verified.

5 4 3 2 1GENERAL NOTES

860 MAIN STREET

EAST HARTFORD,

CT 06108

Autodesk Docs://2508 East Hartford Church Corner Inn/2508 East Hartford Church Corner Inn - R24 - V2.rvt 6/29/2026 1:18:30 PM

AD101

FIRST FLOOR

DEMOLITION PLAN

ABATEMENT & LIMITED INTERIOR

DEMOLITION

5/26/2026

RENOVATION OF

CHURCH

CORNERS INN

TRUE

0' 4' 8' 16' 24'

1/8" = 1'-0"A5 FIRST FLOOR DEMOLITION PLAN

C4.01 REMOVE EXISTING TONGUE AND GROOVE WOOD

FLOORING. REMOVE ALL VARYING

UNDERLAYMENT LAYERS IN THEIR ENTIRETY

DOWN TO THE EXPOSED SUBFLOOR.

C4.02 REMOVE EXISTING CERAMIC TILE FLOORING AND

GROUT. REMOVE ALL VARYING UNDERLAYMENT

LAYERS IN THEIR ENTIRETY DOWN TO THE

EXPOSED SUBFLOOR.

C4.03 REMOVE EXISTING CARPET FLOORING. REMOVE

ALL VARYING UNDERLAYMENT LAYERS IN THEIR

ENTIRETY DOWN TO THE EXPOSED SUBFLOOR.

C4.05 REMOVE EXISTING RESILIENT FLOORING. REMOVE

ALL VARYING UNDERLAYMENT LAYERS IN THEIR

ENTIRETY DOWN TO THE EXPOSED SUBFLOOR.

F2.04 REMOVE AND DISPOSE CEILING TILES. REFER TO

HAZMAT DOCUMENTATION.

F2.06 REMOVE AND DISPOSE OF PIPE GASKET IN WALL

CAVITIES. REFER TO HAZMAT DOCUMENTATION.

F2.10 REMOVAL OF ROOFING SYSTEM SHALL BE

EXECUTED AT A LATER DATE AND IS NIC IN THIS

SCOPE

F2.11 EXTERIOR STAIRS AND FIRE ESCAPES SHALL

REMAIN DURING PHASE 1 DEMOLITION /

ABATEMENT. MAINTAIN ACCESS DURING

CONSTRUCTION

MARK DATE DESCRIPTION

GROSS AREA PER FLR

LEVEL AREA

BASEMENT 5183 SF

FIRST FLOOR 6436 SF

SECOND FLOOR 5364 SF

THIRD FLOOR 5505 SF

FOURTH FLOOR 5509 SF

27997 SF

FLOOR AREAS ARE MEASURED TO THE INSIDE FACE OF

EXTERIOR WALLS.

PLASTER DEMO AREAS

TYPE OF WALL

AREA

(SF)

# OF PLASTER

SIDES

TOTAL AREA

(SF)

BASEMENT

INTERIOR WALL 2884 SF 2 5768 SF

FIRST FLOOR

CHASE WALL 603 SF 1 603 SF

EXTERIOR WALL 2908 SF 1 2908 SF

INTERIOR WALL 4757 SF 2 9515 SF

SECOND FLOOR

CHASE WALL 73 SF 1 73 SF

EXTERIOR WALL 3626 SF 1 3626 SF

INTERIOR WALL 6417 SF 2 12834 SF

THIRD FLOOR

CHASE WALL 96 SF 1 96 SF

EXTERIOR WALL 3562 SF 1 3562 SF

INTERIOR WALL 6571 SF 2 13143 SF

FOURTH FLOOR

CHASE WALL 97 SF 1 97 SF

EXTERIOR WALL 3540 SF 1 3540 SF

INTERIOR WALL 6427 SF 2 12853 SF

41561 SF 68618 SF

FLOOR AND CEILING DEMO AREA

FLOOR AREA SF COMMENT

BASEMENT 496 SF CEILING ONLY

FIRST FLOOR 5689 SF FLR & CEILING

SECOND FLOOR 5133 SF FLR & CEILING

A201 C5

A201A5

A202

F2.06

F2 .0

F2.11

F2.10

F2.11

F2.10

ROOF BELOW

C2.01

C4.05C4.03

C4.03

C4.03 C4.01

C4.03C4.03

C4.03

C4.01

C4.03

C4.01

C4.05

C4.01 C4.01

C4.01

C4.03

C4.05 C4.01

C4.03

C4.02

C4.01

C4.02

C4.01 C4.01

C4.03 C4.02

C4.02

C4.05 C4.02

C4.02

CORR

BEDROOM

KITCHEN

UNASSIGNED

BED ROOM

202A

CLOS

290A

CORR

BEDROOM

221A

CLOS

BEDROOM

291B

BATH

LIVING ROOM

215A

CLOS

CORR

BEDROOM

KITCHEN

BEDROOM

CORRIDOR

LIVING ROOM

292S

STAIR

293S

STAIR

UNASSIGNED

BEDROOM

LIVING ROOM

KITCHEN

227B

CLOS

BEDROOM

290S

STAIR

CORR

BDRM

201A

CLOS

BEDROOM

203A

CLOS

205A

CLOS

225A

BATH

227A

BATH

LIVING ROOM

213A

CLOS

BATHROOM

KITCHEN

BEDROOM

291A

BATH

291S

STAIR

293B

BATH

293A

BATH

225B

CLOS

206A

CLOS

BEDROOM

223A

CLOS

1. REFER TO HAZARDOUS MATERIALS (HAZMAT) DRAWINGS AND ALL APPLICABLE

ENVIRONMENTAL REPORTS FOR ABATEMENT PROTOCOLS PRIOR TO THE START OF

DEMOLITION.

2. THESE NOTES AND DRAWINGS ARE BASED ON VISUAL OBSERVATIONS FROM A 3D

SCAN CONDUCTED ON 5/23/2025. CURRENT FIELD CONDITIONS MAY VARY.

3. INTERIOR WALLS: DEMOLISH AND REMOVE ALL INTERIOR WALL FINISHES DOWN TO

THE BARE STUDS.

4. EXTERIOR WALLS: THE INTERIOR FINISHES ON THE INSIDE FACE OF ALL EXTERIOR

PERIMETER WALLS ARE TO REMAIN INTACT. PROTECT DURING INTERIOR

DEMOLITION. CUT AWAY INTERIOR WALL FINISHES FROM EXTERIOR WALLS WITH A

STRAIGHT, NEAT CUT ON THE INSIDE CORNER.

5. CEILINGS: DEMOLISH AND REMOVE ALL CEILING FINISHES AND FURRING, DOWN TO

THE EXPOSED OVERHEAD JOISTS.

6. FLOORS: DEMOLISH AND REMOVE FLOORING FINISHES AND UNDERLAYMENT IN

THEIR ENTIRETY, DOWN TO SUBFLOORING. UNDERLAYMENT AND EXIST FLOORING

CONDITIONS VARY THROUGHOUT THE BUILDING (MAY INCLUDE PLYWOOD, TONGUE

AND GROOVE WOOD FLOORING, VINYL TILE, ETC.). WHERE FLOOR DEMOLITION IS

INDICATED IN SPECIFIC ROOMS, THE INTENT IS TO REMOVE THE VISIBLE TOP LAYER

OF FLOORING ALONG WITH ALL CONCEALED UNDERLAYMENT LAYERS DOWN TO THE

EXISTING SUBFLOOR.

7. RADIATORS: DEMOLISH AND REMOVE ALL RADIATORS AND ASSOCIATED PIPING.

CONTRACTOR SHALL VERIFY EXACT QUANTITIES IN THE FIELD; ALLOW FOR A 20%

VARIANCE IN TOTAL QUANTITY UP OR DOWN.

8. MATERIAL KEYNOTES IN EACH ROOM MAY VARY FROM ACTUAL FIELD CONDITIONS.

ALL REMOVALS AND DEMOLITION SHALL BE INCLUDED IN THIS WORK.

SELECTIVE DEMOLITION NOTES

WALL TO REMAIN-REMOVE FINISHES

AND BASEBOARD

WALL TO BE DEMOLISHED UNDER LATER

PHASE-REMOVE ALL FINISHES &

BASEBOARD

REMOVE DOOR & FRAME

DEMO LEGEND

OWNER

SHEET TITLE

CHK'D BY:

DRAWN BY:

PROJECT NO:

CWA PROJECT NO.:

ARCHITECT

5 4 3 2 1

CHRISTOPHER WILLIAMS ARCHITECTS, LLC

85 Willow Street 203 776 0184

New Haven, CT 06511 www.cwarchitectsllc.com

ENGINEERS

KEYNOTES

3. Do not scale drawings, except for estimation and approximation purposes.

4. This is an existing building; all conditions and critical dimensions must be field verified.

5 4 3 2 1GENERAL NOTES

860 MAIN STREET

EAST HARTFORD,

CT 06108

Autodesk Docs://2508 East Hartford Church Corner Inn/2508 East Hartford Church Corner Inn - R24 - V2.rvt 6/29/2026 1:19:02 PM

AD102

SECOND FLOOR

DEMOLITION PLAN

ABATEMENT & LIMITED INTERIOR

DEMOLITION

5/26/2026

RENOVATION OF

CHURCH

CORNERS INN

1/8" = 1'-0"A5 SECOND FLOOR DEMOLITION PLAN TRUE

0' 4' 8' 16' 24'

GROSS AREA PER FLR

LEVEL AREA

BASEMENT 5183 SF

FIRST FLOOR 6436 SF

SECOND FLOOR 5364 SF

THIRD FLOOR 5505 SF

FOURTH FLOOR 5509 SF

27997 SF

FLOOR AREAS ARE MEASURED TO THE INSIDE FACE OF

EXTERIOR WALLS.

C2.01 STAIR TO REMAIN

C4.01 REMOVE EXISTING TONGUE AND GROOVE WOOD

FLOORING. REMOVE ALL VARYING

UNDERLAYMENT LAYERS IN THEIR ENTIRETY

DOWN TO THE EXPOSED SUBFLOOR.

C4.02 REMOVE EXISTING CERAMIC TILE FLOORING AND

GROUT. REMOVE ALL VARYING UNDERLAYMENT

LAYERS IN THEIR ENTIRETY DOWN TO THE

EXPOSED SUBFLOOR.

C4.03 REMOVE EXISTING CARPET FLOORING. REMOVE

ALL VARYING UNDERLAYMENT LAYERS IN THEIR

ENTIRETY DOWN TO THE EXPOSED SUBFLOOR.

C4.05 REMOVE EXISTING RESILIENT FLOORING. REMOVE

ALL VARYING UNDERLAYMENT LAYERS IN THEIR

ENTIRETY DOWN TO THE EXPOSED SUBFLOOR.

F2.06 REMOVE AND DISPOSE OF PIPE GASKET IN WALL

CAVITIES. REFER TO HAZMAT DOCUMENTATION.

F2.10 REMOVAL OF ROOFING SYSTEM SHALL BE

EXECUTED AT A LATER DATE AND IS NIC IN THIS

SCOPE

F2.11 EXTERIOR STAIRS AND FIRE ESCAPES SHALL

REMAIN DURING PHASE 1 DEMOLITION /

ABATEMENT. MAINTAIN ACCESS DURING

CONSTRUCTION

MARK DATE DESCRIPTION

PLASTER DEMO AREAS

TYPE OF WALL

AREA

(SF)

# OF PLASTER

SIDES

TOTAL AREA

(SF)

BASEMENT

INTERIOR WALL 2884 SF 2 5768 SF

FIRST FLOOR

CHASE WALL 603 SF 1 603 SF

EXTERIOR WALL 2908 SF 1 2908 SF

INTERIOR WALL 4757 SF 2 9515 SF

SECOND FLOOR

CHASE WALL 73 SF 1 73 SF

EXTERIOR WALL 3626 SF 1 3626 SF

INTERIOR WALL 6417 SF 2 12834 SF

THIRD FLOOR

CHASE WALL 96 SF 1 96 SF

EXTERIOR WALL 3562 SF 1 3562 SF

INTERIOR WALL 6571 SF 2 13143 SF

FOURTH FLOOR

CHASE WALL 97 SF 1 97 SF

EXTERIOR WALL 3540 SF 1 3540 SF

INTERIOR WALL 6427 SF 2 12853 SF

41561 SF 68618 SF

FLOOR AND CEILING DEMO AREA

FLOOR AREA SF COMMENT

BASEMENT 496 SF CEILING ONLY

FIRST FLOOR 5689 SF FLR & CEILING

SECOND FLOOR 5133 SF FLR & CEILING

A201A5

A202

F2.06

F2 .0

F2.11

C4.02

C4.05C4.03

C4.03

C4.02

C4.01 C4.05

C4.02

C4.03

C4.01

C4.03 C4.03

C4.01C4.01

C4.05

C4.01

C4.03

C4.01

C4.03

C4.01

C4.03

C4.05

C4.01

C4.01C4.05

C4.05 C4.03

C4.03

C4.01

C4.03

C4.01 C4.01 C4.01

C4.03

C4.01

C4.05

C4.03

301A

BATH

302A

BATH

BEDROOM

302B

CLOS

BEDROOM

319A

BATH

318A

BATH

BDRM

403F

BATH

403E

BATH

KITCHEN

BATH

LIVING RM

391S

STAIR

BDRM

BEDROOM

KITCHEN

BEDROOM

UNASSIGN

Room

LIVING ROOM322

BEDROOM

BDRM

327B

BATH

325B

BATH326

KITCHEN

BDRM

BEDROOM 403D

Room 327

KITCHEN

LIVING ROOM

CORRIDOR

390B

BATH

390A

BATH

LIVING ROOM

CORR

320A

CLOS

321A

CLOS

CORR

327A

CLOS

313A

CLOS

303A

CLOS

BEDROOM

390S

STAIR

326A

CLOS

322A

CLOS

392S

STAIR

1. REFER TO HAZARDOUS MATERIALS (HAZMAT) DRAWINGS AND ALL APPLICABLE

ENVIRONMENTAL REPORTS FOR ABATEMENT PROTOCOLS PRIOR TO THE START OF

DEMOLITION.

2. THESE NOTES AND DRAWINGS ARE BASED ON VISUAL OBSERVATIONS FROM A 3D

SCAN CONDUCTED ON 5/23/2025. CURRENT FIELD CONDITIONS MAY VARY.

3. INTERIOR WALLS: DEMOLISH AND REMOVE ALL INTERIOR WALL FINISHES DOWN TO

THE BARE STUDS.

4. EXTERIOR WALLS: THE INTERIOR FINISHES ON THE INSIDE FACE OF ALL EXTERIOR

PERIMETER WALLS ARE TO REMAIN INTACT. PROTECT DURING INTERIOR

DEMOLITION. CUT AWAY INTERIOR WALL FINISHES FROM EXTERIOR WALLS WITH A

STRAIGHT, NEAT CUT ON THE INSIDE CORNER.

5. CEILINGS: DEMOLISH AND REMOVE ALL CEILING FINISHES AND FURRING, DOWN TO

THE EXPOSED OVERHEAD JOISTS.

6. FLOORS: DEMOLISH AND REMOVE FLOORING FINISHES AND UNDERLAYMENT IN

THEIR ENTIRETY, DOWN TO SUBFLOORING. UNDERLAYMENT AND EXIST FLOORING

CONDITIONS VARY THROUGHOUT THE BUILDING (MAY INCLUDE PLYWOOD, TONGUE

AND GROOVE WOOD FLOORING, VINYL TILE, ETC.). WHERE FLOOR DEMOLITION IS

INDICATED IN SPECIFIC ROOMS, THE INTENT IS TO REMOVE THE VISIBLE TOP LAYER

OF FLOORING ALONG WITH ALL CONCEALED UNDERLAYMENT LAYERS DOWN TO THE

EXISTING SUBFLOOR.

7. RADIATORS: DEMOLISH AND REMOVE ALL RADIATORS AND ASSOCIATED PIPING.

CONTRACTOR SHALL VERIFY EXACT QUANTITIES IN THE FIELD; ALLOW FOR A 20%

VARIANCE IN TOTAL QUANTITY UP OR DOWN.

8. MATERIAL KEYNOTES IN EACH ROOM MAY VARY FROM ACTUAL FIELD CONDITIONS.

ALL REMOVALS AND DEMOLITION SHALL BE INCLUDED IN THIS WORK.

SELECTIVE DEMOLITION NOTES

WALL TO REMAIN-REMOVE FINISHES

AND BASEBOARD

WALL TO BE DEMOLISHED UNDER LATER

PHASE-REMOVE ALL FINISHES &

BASEBOARD

REMOVE DOOR & FRAME

DEMO LEGEND

OWNER

SHEET TITLE

CHK'D BY:

DRAWN BY:

PROJECT NO:

CWA PROJECT NO.:

ARCHITECT

5 4 3 2 1

CHRISTOPHER WILLIAMS ARCHITECTS, LLC

85 Willow Street 203 776 0184

New Haven, CT 06511 www.cwarchitectsllc.com

ENGINEERS

KEYNOTES

3. Do not scale drawings, except for estimation and approximation purposes.

4. This is an existing building; all conditions and critical dimensions must be field verified.

5 4 3 2 1GENERAL NOTES

860 MAIN STREET

EAST HARTFORD,

CT 06108

Autodesk Docs://2508 East Hartford Church Corner Inn/2508 East Hartford Church Corner Inn - R24 - V2.rvt 6/29/2026 1:20:09 PM

AD103

THIRD FLOOR

DEMOLITION PLAN

ABATEMENT & LIMITED INTERIOR

DEMOLITION

5/26/2026

RENOVATION OF

CHURCH

CORNERS INN

1/8" = 1'-0"A5 THIRD FLOOR DEMOLITION PLAN TRUE

0' 4' 8' 16' 24'

C4.01 REMOVE EXISTING TONGUE AND GROOVE WOOD

FLOORING. REMOVE ALL VARYING

UNDERLAYMENT LAYERS IN THEIR ENTIRETY

DOWN TO THE EXPOSED SUBFLOOR.

C4.02 REMOVE EXISTING CERAMIC TILE FLOORING AND

GROUT. REMOVE ALL VARYING UNDERLAYMENT

LAYERS IN THEIR ENTIRETY DOWN TO THE

EXPOSED SUBFLOOR.

C4.03 REMOVE EXISTING CARPET FLOORING. REMOVE

ALL VARYING UNDERLAYMENT LAYERS IN THEIR

ENTIRETY DOWN TO THE EXPOSED SUBFLOOR.

C4.05 REMOVE EXISTING RESILIENT FLOORING. REMOVE

ALL VARYING UNDERLAYMENT LAYERS IN THEIR

ENTIRETY DOWN TO THE EXPOSED SUBFLOOR.

F2.06 REMOVE AND DISPOSE OF PIPE GASKET IN WALL

CAVITIES. REFER TO HAZMAT DOCUMENTATION.

F2.11 EXTERIOR STAIRS AND FIRE ESCAPES SHALL

REMAIN DURING PHASE 1 DEMOLITION /

ABATEMENT. MAINTAIN ACCESS DURING

CONSTRUCTION

MARK DATE DESCRIPTION

GROSS AREA PER FLR

LEVEL AREA

BASEMENT 5183 SF

FIRST FLOOR 6436 SF

SECOND FLOOR 5364 SF

THIRD FLOOR 5505 SF

FOURTH FLOOR 5509 SF

27997 SF

FLOOR AREAS ARE MEASURED TO THE INSIDE FACE OF

EXTERIOR WALLS.

PLASTER DEMO AREAS

TYPE OF WALL

AREA

(SF)

# OF PLASTER

SIDES

TOTAL AREA

(SF)

BASEMENT

INTERIOR WALL 2884 SF 2 5768 SF

FIRST FLOOR

CHASE WALL 603 SF 1 603 SF

EXTERIOR WALL 2908 SF 1 2908 SF

INTERIOR WALL 4757 SF 2 9515 SF

SECOND FLOOR

CHASE WALL 73 SF 1 73 SF

EXTERIOR WALL 3626 SF 1 3626 SF

INTERIOR WALL 6417 SF 2 12834 SF

THIRD FLOOR

CHASE WALL 96 SF 1 96 SF

EXTERIOR WALL 3562 SF 1 3562 SF

INTERIOR WALL 6571 SF 2 13143 SF

FOURTH FLOOR

CHASE WALL 97 SF 1 97 SF

EXTERIOR WALL 3540 SF 1 3540 SF

INTERIOR WALL 6427 SF 2 12853 SF

41561 SF 68618 SF

FLOOR AND CEILING DEMO AREA

FLOOR AREA SF COMMENT

BASEMENT 496 SF CEILING ONLY

FIRST FLOOR 5689 SF FLR & CEILING

SECOND FLOOR 5133 SF FLR & CEILING

A201A5

A202

F2.11

C4.03

C4.05

C4.03

C4.03 C4.03

C4.05C4.05

C4.05

C4.03

C4.01

C4.03

C4.02

C4.03 C4.05

C4.05 C4.03

C4.03

C4.05

C4.02

C4.03

C4.01

C4.05C4.05

C4.05

C4.01

C4.01 C4.01

C4.01

C4.03

C4.01 C4.05

C4.05

C4.05C4.03

401A

BATH

402A

BATH

BEDROOM

402B

CLOS

BEDROOM

419A

BATH

418A

BATH

BEDROOM

493A

BATH

493B

BATH

KITCHEN

BATH

LIVING ROOM

491S

STAIR

BEDROOM

KITCHEN

BEDROOM

UNASSIGNED

BEDROOM

LIVING ROOM422

BEDROOM

427B

BATH

426B

BATH426

KITCHEN

BEDROOM

BEDROOM 425

LIVING ROOM 427

KITCHEN

LIVING ROOM

CORRIDOR

490B

BATHROOM

490A

BATHROOM

BEDROOM

CORRIDOR

420A

CLOS

421A

CLOS

CORRIDOR

426A

CLOS

427A

CLOS

414A

CLOS

490S

STAIR

492S

STAIR

403A

CLOS

405A

CLOS

BDRM

423A

CLOS

1. REFER TO HAZARDOUS MATERIALS (HAZMAT) DRAWINGS AND ALL APPLICABLE

ENVIRONMENTAL REPORTS FOR ABATEMENT PROTOCOLS PRIOR TO THE START OF

DEMOLITION.

2. THESE NOTES AND DRAWINGS ARE BASED ON VISUAL OBSERVATIONS FROM A 3D

SCAN CONDUCTED ON 5/23/2025. CURRENT FIELD CONDITIONS MAY VARY.

3. INTERIOR WALLS: DEMOLISH AND REMOVE ALL INTERIOR WALL FINISHES DOWN TO

THE BARE STUDS.

4. EXTERIOR WALLS: THE INTERIOR FINISHES ON THE INSIDE FACE OF ALL EXTERIOR

PERIMETER WALLS ARE TO REMAIN INTACT. PROTECT DURING INTERIOR

DEMOLITION. CUT AWAY INTERIOR WALL FINISHES FROM EXTERIOR WALLS WITH A

STRAIGHT, NEAT CUT ON THE INSIDE CORNER.

5. CEILINGS: DEMOLISH AND REMOVE ALL CEILING FINISHES AND FURRING, DOWN TO

THE EXPOSED OVERHEAD JOISTS.

6. FLOORS: DEMOLISH AND REMOVE FLOORING FINISHES AND UNDERLAYMENT IN

THEIR ENTIRETY, DOWN TO SUBFLOORING. UNDERLAYMENT AND EXIST FLOORING

CONDITIONS VARY THROUGHOUT THE BUILDING (MAY INCLUDE PLYWOOD, TONGUE

AND GROOVE WOOD FLOORING, VINYL TILE, ETC.). WHERE FLOOR DEMOLITION IS

INDICATED IN SPECIFIC ROOMS, THE INTENT IS TO REMOVE THE VISIBLE TOP LAYER

OF FLOORING ALONG WITH ALL CONCEALED UNDERLAYMENT LAYERS DOWN TO THE

EXISTING SUBFLOOR.

7. RADIATORS: DEMOLISH AND REMOVE ALL RADIATORS AND ASSOCIATED PIPING.

CONTRACTOR SHALL VERIFY EXACT QUANTITIES IN THE FIELD; ALLOW FOR A 20%

VARIANCE IN TOTAL QUANTITY UP OR DOWN.

8. MATERIAL KEYNOTES IN EACH ROOM MAY VARY FROM ACTUAL FIELD CONDITIONS.

ALL REMOVALS AND DEMOLITION SHALL BE INCLUDED IN THIS WORK.

SELECTIVE DEMOLITION NOTES

WALL TO REMAIN-REMOVE FINISHES

AND BASEBOARD

WALL TO BE DEMOLISHED UNDER LATER

PHASE-REMOVE ALL FINISHES &

BASEBOARD

REMOVE DOOR & FRAME

DEMO LEGEND

OWNER

SHEET TITLE

CHK'D BY:

DRAWN…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Aug 3, 2026.