Attachment 5 - CDRLs

CONTRACT DATA REQUIREMENTS LIST (1 Data Item) Form Approval OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................:

A

C. CATEGORY..............................:

FORMDROPDOWN

D. SYSTEM/ITEM........:

LEAMR

E. CONTRACT/PR NO.:

F. CONTRACTOR.........:

6. REQUIRING OFFICE..............:

AFRL/RDLE

7. DD250 REQ................................:

FORMDROPDOWN

8. APP CODE.................................:

N

9. DIST. STATEMENT REQUIRED......:

See 16

10. FREQUENCY......................................:

See 16

11. AS OF DATE........................................:

See 16

12. DATE OF FIRST SUBMISSION:

See 16

13. DATE OF SUBSEQUENT SUBM.:

See 16

14. DISTRIBUTION

16. REMARKS

Blk 4: Tailoring of DID Requirements. Computer Software Product End Items shall include appropriate documentation, source code and executable as well as operation guidance. Documentation must be compatible with Microsoft Office 2010 or later version. Contractor shall submit to the Government PM a CD-R.

Blk 9: All documentation shall be marked I.A.W. DoDD 5230.24 with “Distribution Statement “F” and EXPORT CONTROL WARNING:

DISTRIBUTION STATEMENT: Further dissemination only as directed by Air Force Research Laboratory/RDLE, 17 March 2014 or higher DoD authority.

Distribution Statements may be changed after they are submitted to the Government.

EXPORT CONTROL WARNING: All Technical data must be marked as follows: “WARNING – This document contains technical data whose export is restricted by the Arms Export Control Act (title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C., App. 2401, et. seq.). Violations of these export law are subject to severe criminal penalties. Disseminate in accordance with the provisions of DoD Directive 5230.25.”

DESTRUCTION NOTICE—For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Blks 10-13: The contractor shall submit the draft source code, executables, and associated documentation 10 days after completion of development effort. The government will provide comments within 10 days of receipt. The contractor shall provide the final version 15 days after completion.

17. PRICE GROUP:

18. ESTIMATED TOTAL PRICE :

H. DATE: 21 Mar 14

J. DATE: 24 Mar 2014

DD Form 1423-1, SEP 97 (EG) (Computer Generated)

PREVIOUS EDITIONS ARE OBSOLETE

Page 1 of 1 Pages

CONTRACT DATA REQUIREMENTS LIST (1 Data Item) Form Approval OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................:

A

C. CATEGORY..............................:

FORMDROPDOWN

D. SYSTEM/ITEM........:

LEAMR

E. CONTRACT/PR NO.:

F. CONTRACTOR.........:

6. REQUIRING OFFICE..............:

AFRL/RDLE

7. DD250 REQ................................:

FORMDROPDOWN

8. APP CODE.................................:

A

9. DIST. STATEMENT REQUIRED......:

See 16

10. FREQUENCY......................................:

See 16

11. AS OF DATE........................................:

See 16

12. DATE OF FIRST SUBMISSION:

See 16

14. DISTRIBUTION

16. REMARKS

Blk 4: Tailoring of DID Requirements. A test plan shall be delivered for each test measurement series and coordinated with Government PM. Must be compatible with Microsoft Office 2010 or later version.

Blk 9: All documentation shall be marked I.A.W. DoDD 5230.24 using the DISTRIBUTION STATEMENT “F” and EXPORT CONTROL WARNING:

DISTRIBUTION STATEMENT: Further dissemination only as directed by Air Force Research Laboratory/RDLE, 17 March 2014 or higher DoD authority.

Distribution Statements may be changed after they are submitted to the Government.

EXPORT CONTROL WARNING: All Technical data must be marked as follows: “WARNING – This document contains technical data whose export is restricted by the Arms Export Control Act (title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C., App. 2401, et. seq.). Violations of these export law are subject to severe criminal penalties. Disseminate in accordance with the provisions of DoD Directive 5230.25.”

Electronic versions must be submitted in a manner consistent with protecting export control and limited information. Submission via unencrypted or unsecure email is not permitted.

DESTRUCTION NOTICE—For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Blks 10, 11, 12 &13 Draft should be completed within 30 days of Test Readiness Review (TRR). Final due 15 days prior to TRR.

17. PRICE GROUP:

18. ESTIMATED TOTAL PRICE :

H. DATE: 21 Mar 14

J. DATE: 24 Mar 2014

Page 2 of 12 Page CONTRACT DATA REQUIREMENTS LIST (1 Data Item) Form Approval OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................:

A

C. CATEGORY..............................:

FORMDROPDOWN

D. SYSTEM/ITEM........:

LEAMR

E. CONTRACT/PR NO.:

F. CONTRACTOR.........:

6. REQUIRING OFFICE..............:

AFRL/RDLE

7. DD250 REQ................................:

FORMDROPDOWN

8. APP CODE.................................:

A

9. DIST. STATEMENT REQUIRED......:

See 16

10. FREQUENCY......................................:

See 16

11. AS OF DATE........................................:

See 16

12. DATE OF FIRST SUBMISSION:

See 16

14. DISTRIBUTION

16. REMARKS

Blk 4: Tailoring of DID Requirements. For each unique hardware system evaluated. The Contractor shall deliver one (1) set of design drawings and associated lists. In addition, the contractor shall supply an electronic version of the drawing package in a format compatible with Solidworks (most recent version). Documentation must be compatible with Microsoft Office 2010 or later version.

Blk 9: All documentation shall be marked I.A.W. DoDD 5230.24 using the DISTRIBUTION STATEMENT “F” and EXPORT CONTROL WARNING:

DISTRIBUTION STATEMENT: Further dissemination only as directed by Air Force Research Laboratory/RDLE, 17 March 2014 or higher DoD authority.

Distribution Statements may be changed after they are submitted to the Government.

EXPORT CONTROL WARNING: All Technical data must be marked as follows: “WARNING – This document contains technical data whose export is restricted by the Arms Export Control Act (title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C., App. 2401, et. seq.). Violations of these export law are subject to severe criminal penalties. Disseminate in accordance with the provisions of DoD Directive 5230.25.”

Electronic versions must be submitted in a manner consistent with protecting export control and limited information. Submission via unencrypted or unsecure email is not permitted.

DESTRUCTION NOTICE—For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Blks 10, 11, 12 & 13: Draft shall be completed within 30 day of final government recommendation. Final due 10 days after presentation of recommendation.

17. PRICE GROUP:

18. ESTIMATED TOTAL PRICE :

H. DATE: 21 Mar 14

J. DATE: 24 Mar 2014

Page 3 of 12 Page

CONTRACT DATA REQUIREMENTS LIST (1 Data Item) Form Approval OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................:

A

C. CATEGORY..............................:

FORMDROPDOWN

D. SYSTEM/ITEM........:

LEAMR

E. CONTRACT/PR NO.:

F. CONTRACTOR.........:

6. REQUIRING OFFICE..............:

AFRL/RDLE

7. DD250 REQ................................:

FORMDROPDOWN

8. APP CODE.................................:

N/A

9. DIST. STATEMENT REQUIRED......:

See 16

10. FREQUENCY......................................:

See 16

11. AS OF DATE........................................:

See 16

12. DATE OF FIRST SUBMISSION:

See 16

14. DISTRIBUTION

AFRL/RDLE (PM)

15. TOTAL:

16. REMARKS

Blk 4: Tailoring of DID Requirements. The contractor shall provide project status updates for incorporation into Program Management Reviews/Technical Interchange Meetings (PMR/TIMs). This update shall include providing the manpower, skills and resources required to plan, organize, coordinate, direct, accomplish, and document technical efforts and track funding requirements, use an effective cost, schedule, and technical performance control systems, and implement an efficient organizational structure flexible to the changing requirement and workloads. The Contractor shall provide the status of deliverables against schedule, track expenditures against both the budget and approved activities, and report technical progress on ongoing activities. The Contractor shall provide this information on a monthly basis with information being provided no later than the 10th of the following month. The format shall be determined by the government. Must be compatible with Microsoft Office 2010 or later version Blk 9: All documentation shall be marked I.A.W. DoDD 5230.24 using the DISTRIBUTION STATEMENT “F” and EXPORT CONTROL WARNING:

DISTRIBUTION STATEMENT: Further dissemination only as directed by Air Force Research Laboratory/RDLE, 17 March 2014 or higher DoD authority.

Distribution Statements may be changed after they are submitted to the Government.

EXPORT CONTROL WARNING: All Technical data must be marked as follows: “WARNING – This document contains technical data whose export is restricted by the Arms Export Control Act (title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C., App. 2401, et. seq.). Violations of these export law are subject to severe criminal penalties. Disseminate in accordance with the provisions of DoD Directive 5230.25.”

Electronic versions must be submitted in a manner consistent with protecting export control and limited information. Submission via unencrypted or unsecure email is not permitted.

DESTRUCTION NOTICE—For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Blks 10, 11, 12 & 13: Draft due 5 days after closing of accounting period. Final due 10 days after Government review and comment.

17. PRICE GROUP:

18. ESTIMATED TOTAL PRICE :

H. DATE: 21 Mar 14

J. DATE: 24 Mar 2014

Page 4 of 12 Page

CONTRACT DATA REQUIREMENTS LIST (1 Data Item) Form Approval OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................:

A

C. CATEGORY..............................:

FORMDROPDOWN

D. SYSTEM/ITEM........:

LEAMR

E. CONTRACT/PR NO.:

F. CONTRACTOR.........:

6. REQUIRING OFFICE..............:

AFRL/RDLE

7. DD250 REQ................................:

FORMDROPDOWN

8. APP CODE.................................:

N/A

9. DIST. STATEMENT REQUIRED......:

See 16

10. FREQUENCY......................................:

See 16

11. AS OF DATE........................................:

See 16

12. DATE OF FIRST SUBMISSION:

See 16

14. DISTRIBUTION

AFRL/RDLE (PM)

AFRL/RDL (COR)

15. TOTAL:

16. REMARKS

Blk 4: Tailoring of DID Requirements. The Contractor shall report all activities at the WBS level III (work package level). Technical and cost status information shall be included in this report. Contractor shall use a format acceptable to the Government. In addition, the contractor shall prepare labor reports at the Work Unit level and provide a line item report of all commitments, obligations, and expenditures within each project. Must be compatible with Microsoft Office 2010 or later.

BLOCK 7: In preparing the DD250, code the shipment number with a “Z”. A final status report covering all open work units is due 30 days after the completion of the contract. All other status reports will be submitted via a letter of transmittal. Send the DD250 and letter of transmittal to the designated Government Program Manager.

Blk 9: All documentation shall be marked I.A.W. DoDD 5230.24 using the DISTRIBUTION STATEMENT “F” and EXPORT CONTROL WARNING:

DISTRIBUTION STATEMENT: Further dissemination only as directed by Air Force Research Laboratory/RDLE, 17 March 2014 or higher DoD authority.

Distribution Statements may be changed after they are submitted to the Government.

EXPORT CONTROL WARNING: All Technical data must be marked as follows: “WARNING – This document contains technical data whose export is restricted by the Arms Export Control Act (title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C., App. 2401, et. seq.). Violations of these export law are subject to severe criminal penalties. Disseminate in accordance with the provisions of DoD Directive 5230.25.”

Electronic versions must be submitted in a manner consistent with protecting export control and limited information. Submission via unencrypted or unsecure email is not permitted.

DESTRUCTION NOTICE—For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

BLOCKS 10, 12, and 13: The contractor shall deliver the first Status Report within 15 calendar days after completion of the first full contractor accounting month. The subsequent status reports and the line item reports (see BLOCK 4 above) shall be delivered within 15 calendar days after the end of each subsequent accounting month (monthly) thereafter through technical completion.

BLOCK 14A: One copy of the Status Report shall go to the Government Project Officer identified in the SOW and COR.

BLOCK 16: Unclassified reports may be submitted by e-mail to the Government Project Officer and COR only if the contractor has an IECA/ECA PKI program that allows for secure communications with the DoD. E-mail encryption capability based on a PGP platform is not acceptable.

17. PRICE GROUP:

18. ESTIMATED TOTAL PRICE :

H. DATE: 21 Mar 14

J. DATE: 24 Mar 2014

Page 5 of 12 Page

CONTRACT DATA REQUIREMENTS LIST (1 Data Item) Form Approval OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................:

A

C. CATEGORY..............................:

FORMDROPDOWN

D. SYSTEM/ITEM........:

LEAMR

E. CONTRACT/PR NO.:

F. CONTRACTOR.........:

6. REQUIRING OFFICE..............:

AFRL/RDLE

7. DD250 REQ................................:

FORMDROPDOWN

8. APP CODE.................................:

NO

9. DIST. STATEMENT REQUIRED......:

See 16

10. FREQUENCY......................................:

See 16

11. AS OF DATE........................................:

See 16

12. DATE OF FIRST SUBMISSION:

See 16

14. DISTRIBUTION

16. REMARKS

Blk 4: Tailoring of DID Requirements. Contractor format. This report shall document interim studies/services as requested by Government PM. Must be compatible with Microsoft Office 2010 or later version Blk 9: All documentation shall be marked I.A.W. DoDD 5230.24 using the DISTRIBUTION STATEMENT “F” and EXPORT CONTROL WARNING:

DISTRIBUTION STATEMENT: Further dissemination only as directed by Air Force Research Laboratory/RDLE, 17 March 2014 or higher DoD authority.

Distribution Statements may be changed after they are submitted to the Government.

EXPORT CONTROL WARNING: All Technical data must be marked as follows: “WARNING – This document contains technical data whose export is restricted by the Arms Export Control Act (title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C., App. 2401, et. seq.). Violations of these export law are subject to severe criminal penalties. Disseminate in accordance with the provisions of DoD Directive 5230.25.”

Electronic versions must be submitted in a manner consistent with protecting export control and limited information. Submission via unencrypted or unsecure email is not permitted.

DESTRUCTION NOTICE—For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Blk 10, 11, 12 & 13: Draft due 30 days after an analysis is completed.

Blk 14: Submit an electronic version along with one hard copy to the Program Manger. Final report due 10 days after government review.

17. PRICE GROUP:

18. ESTIMATED TOTAL PRICE :

H. DATE: 21 Mar 14

J. DATE: 24 Mar 2014

Page 6 of 12 Page

CONTRACT DATA REQUIREMENTS LIST (1 Data Item) Form Approval OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................:

A

C. CATEGORY..............................:

FORMDROPDOWN

D. SYSTEM/ITEM........:

LEAMR

E. CONTRACT/PR NO.:

F. CONTRACTOR.........:

6. REQUIRING OFFICE..............:

AFRL/RDLE

7. DD250 REQ................................:

FORMDROPDOWN

8. APP CODE.................................:

A

9. DIST. STATEMENT REQUIRED......:

See 16

10. FREQUENCY......................................:

See 16

11. AS OF DATE........................................:

See 16

12. DATE OF FIRST SUBMISSION:

See 16

14. DISTRIBUTION

16. REMARKS

THE REPORT WILL BE PUBLISHED WITH THE DEFENSE TECHNICAL INFORMATION CENTER (DTIC) BY AFRL STINFO OFFICE. Under no circumstances shall the contractor submit either the final report or the camera-ready technical report to DTIC. Must be compatible with Microsoft Office 2010 or later version.

Blk 4: Tailoring of DID Requirements.

GUIDANCE FOR PREPARATION OF THE REPORT: The Scientific and Technical Report shall be prepared I.A.W. the most current AFRL ANSI/NISO Standard Z39.18-2005, or other most current report preparation guidance, located at: http://www.kirtland.af.mil/prs.

The contractor shall complete and submit an SF 298 Report Documentation Page, with the final report. The SF 298 is available at: http://www.kirtland.af.mil/prs. The contractor shall complete the following blocks of the SF298: Blocks 2-5a, 6, 7, 8 and 13 (if applicable), 14-16c.

The contractor shall complete and sign the most current AFRL Form 25, AFRL Quality Final Technical Report Checklist, and submit it with the final report as part of the report deliverable. The checklist is available at: http://www.kirtland.af.mil/prs. If the completed and signed AFRL Form 25 does not accompany the final report, the deliverable is considered incomplete. Incomplete final reports will be immediately returned to the contractor. Following AFRL technical and STINFO reviews, any revisions required will be returned to the contractor.

The contractor shall deliver two editable electronic copies of the final report. The electronic copies shall be an editable .pdf file and the most current version of Microsoft Word. A CD-ROM (CD-R) is the acceptable media for submittal. (CD-RWs are not acceptable.) Electronic media shall be marked IAW the AFRL ANSI/NISO Standard Z39.18-2005 guidelines. Submission via unencrypted or unsecure email is not permitted.

Blk 7: Submit Final Report with letter of transmittal and the DD 250 to the designated project manager. In preparing the final DD 250 for the contract, code the shipment number with a “Z”.

Blk 9: All technical data (including electronic media/CD-R) shall be marked I.A.W. DoDD 5230.24 with Distribution Statement F and and other required markings shown indented below:

Further dissemination only as directed by Air Force Research Laboratory/RDLE, or higher DoD authority [contractor fill in date of report (ddmmmyy)] . (ADD THIS ENTIRE DISTRIBUTION STATEMENT TO THE BOTTOM OF EVERY PAGE OF THE REPORT EXCEPT THE SF FORM 298.

Distribution Statements may be changed after they are submitted to the Government.

WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec. 2751, et seq.) or the Export Administration Act of 1979, as amended. Title 50 U.S.C. App 2401 et seq. Violations of these export laws are subject to severe criminal penalties. Disseminate I.A.W. the provisions of the DoD Directive 5230.25. (ADD “WARNING: EXPORT CONTROLLED” TO THE BOTTOM OF EVERY PG OF THE REPORT EXCEPT THE SF FORM 298s.)

DESTRUCTION NOTICE—For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Blks 10 - 13: The contractor shall deliver the Scientific and Technical Report, in final format, no later than the date specified in the Schedule, «CLIN 0003». The USAF will review and, if necessary, return the final report with comments no later than the date specified in the Schedule, «CLIN 0003». If the report is returned to the contractor with comments, the contractor shall deliver the camera-ready copy of the report no later than the date specified in the Schedule, «CLIN 0003».

NOTE: Headings in Block 14B, Copies, have been changed. “Draft” is changed to “Final” and “Final” (in second column) is changed to “CRC” (camera-ready copy).

17. PRICE GROUP:

18. ESTIMATED TOTAL PRICE :

H. DATE: 21 Mar 14

J. DATE: 24 Mar 2014

Page 7 of 12 Page

CONTRACT DATA REQUIREMENTS LIST (1 Data Item) Form Approval OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................:

A

C. CATEGORY..............................:

FORMDROPDOWN

D. SYSTEM/ITEM........:

LEAMR

E. CONTRACT/PR NO.:

F. CONTRACTOR.........:

6. REQUIRING OFFICE..............:

AFRL/RDLE

7. DD250 REQ................................:

FORMDROPDOWN

8. APP CODE.................................:

N

9. DIST. STATEMENT REQUIRED......:

See 16

10. FREQUENCY......................................:

See 16

11. AS OF DATE........................................:

See 16

12. DATE OF FIRST SUBMISSION:

See 16

14. DISTRIBUTION

16. REMARKS

Blk 4: Tailoring of DID Requirements. Computer Programming Manual. For each piece of software developed, new version released, or significant updates performed. Must be compatible with Microsoft Office 2010 or later version.

(This CDRL A008 is added to supplement CDRL A001—“Computer S/W Product End Items”)

Blk 9: All documentation shall be marked I.A.W. DoDD 5230.24 with “Distribution Statement “F” and EXPORT CONTROL WARNING:

DISTRIBUTION STATEMENT: Further dissemination only as directed by Air Force Research Laboratory/RDLE, 17 March 2014 or higher DoD authority.

Distribution Statements may be changed after they are submitted to the Government.

EXPORT CONTROL WARNING: All Technical data must be marked as follows: “WARNING – This document contains technical data whose export is restricted by the Arms Export Control Act (title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C., App. 2401, et. seq.). Violations of these export law are subject to severe criminal penalties. Disseminate in accordance with the provisions of DoD Directive 5230.25.”

DESTRUCTION NOTICE—For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Blks 10-13: The contractor shall submit the draft manual 30 days after completion of major model upgrade. Final due 10 days after AFRL/RDLE review of draft.

17. PRICE GROUP:

18. ESTIMATED TOTAL PRICE :

H. DATE: 21 Mar 14

J. DATE: 24 Mar 2014

Page 8 of 12 Page

CONTRACT DATA REQUIREMENTS LIST (1 Data Item) Form Approval OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................:

A

C. CATEGORY..............................:

FORMDROPDOWN

D. SYSTEM/ITEM........:

LEAMR

E. CONTRACT/PR NO.:

F. CONTRACTOR.........:

6. REQUIRING OFFICE..............:

AFRL/RDLE

7. DD250 REQ................................:

FORMDROPDOWN

8. APP CODE.................................:

N

9. DIST. STATEMENT REQUIRED......:

See 16

10. FREQUENCY......................................:

See 16

11. AS OF DATE........................................:

See 16

12. DATE OF FIRST SUBMISSION:

See 16

14. DISTRIBUTION

16. REMARKS

Blk 4: Tailoring of DID Requirements. Software User’s Manual. For each piece of software developed, new version released, or significant updates performed. Must be compatible with Microsoft Office 2010 or later version.

(This CDRL is added to supplement CDRL A001 —“Computer S/W Product End Items”)

Blk 9: All documentation shall be marked I.A.W. DoDD 5230.24 with “Distribution Statement “F” and EXPORT CONTROL WARNING:

DISTRIBUTION STATEMENT: Further dissemination only as directed by Air Force Research Laboratory/RDLE, 17 March 2014 or higher DoD authority.

Distribution Statements may be changed after they are submitted to the Government.

EXPORT CONTROL WARNING: All Technical data must be marked as follows: “WARNING – This document contains technical data whose export is restricted by the Arms Export Control Act (title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C., App. 2401, et. seq.). Violations of these export law are subject to severe criminal penalties. Disseminate in accordance with the provisions of DoD Directive 5230.25.”

DESTRUCTION NOTICE—For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document

Blks 10-13: The contractor shall submit the draft manual 30 days after completion of major model upgrade. Final due 10 days after AFRL/RDLE review of draft.

17. PRICE GROUP:

18. ESTIMATED TOTAL PRICE :

H. DATE: 21 Mar 14

J. DATE: 24 Mar 2014

Page 9 of 12 Page

CONTRACT DATA REQUIREMENTS LIST (1 Data Item) Form Approval OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................:

A

C. CATEGORY..............................:

FORMDROPDOWN

D. SYSTEM/ITEM........:

LEAMR

E. CONTRACT/PR NO.:

F. CONTRACTOR.........:

3. SUBTITLE..................................:

6. REQUIRING OFFICE..............:

AFRL/RDLE

7. DD250 REQ................................:

FORMDROPDOWN

8. APP CODE.................................:

NO

9. DIST. STATEMENT REQUIRED......:

See 16

10. FREQUENCY......................................:

See 16

11. AS OF DATE........................................:

See 16

12. DATE OF FIRST SUBMISSION:

See 16

14. DISTRIBUTION

16. REMARKS

Blk 9: All documentation shall be marked I.A.W. DoDD 5230.24 using the DISTRIBUTION STATEMENT “F” and EXPORT CONTROL WARNING:

DISTRIBUTION STATEMENT: Further dissemination only as directed by Air Force Research Laboratory/RDLE, 17 March 2014 or higher DoD authority.

Distribution Statements may be changed after they are submitted to the Government.

EXPORT CONTROL WARNING: All Technical data must be marked as follows: “WARNING – This document contains technical data whose export is restricted by the Arms Export Control Act (title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C., App. 2401, et. seq.). Violations of these export law are subject to severe criminal penalties. Disseminate in accordance with the provisions of DoD Directive 5230.25.”

Electronic versions must be submitted in a manner consistent with protecting export control and limited information. Submission via unencrypted or unsecure email is not permitted.

DESTRUCTION NOTICE—For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Blk 10, 11, 12 & 13: Draft due 30 days after Test/Inspections is completed. Final due 10 days after government review.

Blk 14: Submit an electronic version to the Program Manger.

17. PRICE GROUP:

18. ESTIMATED TOTAL PRICE :

H. DATE: 21 Mar 14

J. DATE: 24 Mar 2014

Page 10 of 12 Page

CONTRACT DATA REQUIREMENTS LIST (1 Data Item) Form Approval OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................:

A

C. CATEGORY..............................:

FORMDROPDOWN

D. SYSTEM/ITEM........:

LEAMR

E. CONTRACT/PR NO.:

F. CONTRACTOR.........:

6. REQUIRING OFFICE..............:

AFRL/RDLE

7. DD250 REQ................................:

FORMDROPDOWN

8. APP CODE.................................:

NO

9. DIST. STATEMENT REQUIRED......:

See 16

10. FREQUENCY......................................:

See 16

11. AS OF DATE........................................:

See 16

12. DATE OF FIRST SUBMISSION:

See 16

14. DISTRIBUTION

16. REMARKS

Blk 4: Tailoring of DID Requirements. The CDRL shall include the following: Instrumentation, Test Hardware, and Test Article Fabrication Documentation. Inclusive with the test hardware will be a report that shall include complete design documentation of the prototype device developed under this contract. This document must include operation, installation, and preventative maintenance instructions. Required data includes safety considerations, interconnection diagrams, logical diagrams, operating procedures, parts and components list, material types, test print list, and normal operating parameters. Format must be compatible with latest version of Solidworks and Microsoft 2010 or later version. Report shall not be submitted electronically.

Blk 9: All documentation shall be marked I.A.W. DoDD 5230.24 using the DISTRIBUTION STATEMENT “F” and EXPORT CONTROL WARNING:

DISTRIBUTION STATEMENT: Further dissemination only as directed by Air Force Research Laboratory/RDLE, 17 March 2014 or higher DoD authority.

Distribution Statements may be changed after they are submitted to the Government.

EXPORT CONTROL WARNING: All Technical data must be marked as follows: “WARNING – This document contains technical data whose export is restricted by the Arms Export Control Act (title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C., App. 2401, et. seq.). Violations of these export law are subject to severe criminal penalties. Disseminate in accordance with the provisions of DoD Directive 5230.25.”

Electronic versions must be submitted in a manner consistent with protecting export control and limited information. Submission via unencrypted or unsecure email is not permitted.

DESTRUCTION NOTICE—For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Blk 10, 11, 12 & 13: Draft due 30 days after Test/Inspections is completed. Final due 10 days after government review.

Blk 12 & 13: The final “as built” design documentation package(s) shall be delivered along with hardware.

17. PRICE GROUP:

18. ESTIMATED TOTAL PRICE :

H. DATE: 21 Mar 14

J. DATE: 24 Mar 2014

Page 11 of 12 Page

CONTRACT DATA REQUIREMENTS LIST (1 Data Item) Form Approval OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................:

A

C. CATEGORY..............................:

FORMDROPDOWN

D. SYSTEM/ITEM........:

LEAMR

E. CONTRACT/PR NO.:

F. CONTRACTOR.........:

6. REQUIRING OFFICE..............:

AFRL/RDLE

7. DD250 REQ................................:

FORMDROPDOWN

8. APP CODE.................................:

NO

9. DIST. STATEMENT REQUIRED......:

See 16

10. FREQUENCY......................................:

See 16

11. AS OF DATE........................................:

See 16

12. DATE OF FIRST SUBMISSION:

See 16

14. DISTRIBUTION

AFRL/RDLE (PM)

afrl/rdl (cor)

ACO

LT

det 8 afrl/rvkdp

LT

15. TOTAL:

16. REMARKS

Blk 4 Tailoring of DID Requirements

Para 2. Submit using Microsoft Office products or methods approved by the designated technical project officer

Para 2.1 – 2.10 Remove/Reorder/Rename fields for UID data elements:

Para 2.1 UID of item delivered that contains the embedded Subassemblies, Components or Parts (SCPs)

Para 2.1 UID of embedded SCPs

Para 2.3 UID type

Para 2.4 Issuing agency code

Para 2.5 Enterprise identifier

Para 2.6 Original part number

Para 2.7 Serial number

Para 2.8 Unit of measure

Para 2.9 Description

Para 2.10 through 2.15, not used, deleted in their entirety

Blk 9: All documentation shall be marked I.A.W. DoDD 5230.24 using the DISTRIBUTION STATEMENT “F” and EXPORT CONTROL WARNING:

DISTRIBUTION STATEMENT: Further dissemination only as directed by Air Force Research Laboratory/RDLE, 17 March 2014 or higher DoD authority.

Distribution Statements may be changed after they are submitted to the Government. EXPORT CONTROL WARNING: All Technical data must be marked as follows: “WARNING – This document contains technical data whose export is restricted by the Arms Export Control Act (title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C., App. 2401, et. seq.). Violations of these export law are subject to severe criminal penalties. Disseminate in accordance with the provisions of DoD Directive 5230.25.”

Electronic versions must be submitted in a manner consistent with protecting export control and limited information. Submission via unencrypted or unsecure email is not permitted.

DESTRUCTION NOTICE—For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Blks 10-13: Delivery shall be concurrent with associated end item delivery

17. PRICE GROUP:

18. ESTIMATED TOTAL PRICE :

H. DATE: 21 Mar 14

J. DATE: 24 Mar 2014

Page 12 of 12 Page

CONTRACT DATA REQUIREMENTS LIST (1 Data Item) Form Approval OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.:

B. EXHIBIT....................................:

A

C. CATEGORY..............................:

FORMDROPDOWN

D. SYSTEM/ITEM........:

LEAMR

E. CONTRACT/PR NO.:

F. CONTRACTOR.........:

6. REQUIRING OFFICE..............:

AFRL/RDLE

7. DD250 REQ................................:

FORMDROPDOWN

8. APP CODE.................................:

NO

9. DIST. STATEMENT REQUIRED......:

See 16

10. FREQUENCY......................................:

See 16

11. AS OF DATE........................................:

See 16

12. DATE OF FIRST SUBMISSION:

See 16

14. DISTRIBUTION

15. TOTAL:

16. REMARKS

Blk 4: Tailoring of DID Requirements. Contractor format is preferred. Must be compatible with Microsoft Office 2010 or later version.

The Contractor shall work with the AFRL/RDLE Task Order Officer (TOO) to develop a program plan that will describe the following:

· Program schedule with key milestones, participants and justification why these individuals have been…