B08_Solicitation-SOW-Handrail_Drawings-Specifications.pdf
PDF 131 KB Posted
- Attached to
- PIRO FABRICATE AND INSTALL HANDRAIL IAW SOW
- Solicitation number
- 140P6426Q0127
About this file
This document contains architectural construction drawings for a wood-framed structure with ramp and stair access. The drawings depict a boathouse structure with detailed specifications for framing, decking, railing systems, and structural connections.
The first sheet shows the framing plan for the primary structure, featuring treated lumber posts (2x12) anchored into concrete, arranged in a grid pattern with 12-foot and 4-foot spacing intervals. Posts connect to horizontal members forming deck bays, with DBL 2x12 carriage bolts securing posts to a ramp landing area. The second sheet illustrates ramp and stair elevations, with railing details including 1.5-inch steel pipe welded to structural supports with 5-0-inch spacing between intermediate posts for accessibility compliance. The railing system incorporates 3/4-inch steel guardrail members spaced to meet ADA standards. The third sheet provides an interior rail elevation showing a seven-bay railing system running approximately 39 feet in length, with rails comprised of 1.5-inch O.D. steel pipe for horizontal and vertical components. Construction notes specify field verification prior to shop drawing production, treatment standards for lumber, flange-based connections for steel railings, and offset requirements (3 inches minimum, 4 inches maximum) from existing walls to prevent interference with flanges and avoid tripping hazards on level floors.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Service_ComboSynop_140P6426Q0127_0001.pdf | ||
| Sol_140P6426Q0127_Amd_0001.pdf | ||
| B08_Solicitation-Price_Schedule.xlsx | XLSX spreadsheet | |
| Sol_140P6426Q0127.pdf | ||
| B03_DOL_Wage_Determination.pdf | ||
| B08_Solicitation-SOW.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AutoCAD SHX Text 6X6 POST TO SIMPSON POST ANCHORS INTO 12" DIA. CONCRETE IN SONOTUBE TO FROST, TYP ALL POSTS
AutoCAD SHX Text 2X12X12' TREATED LUMBER, TYP. ANCHOR TO 2X12 HEADER JOISTS WITH SIMPSON Z-MAX JOIST HANGERS
AutoCAD SHX Text
2X12 BLOCKING, TYP.
AutoCAD SHX Text
DBL 2X12 CARRIAGE BOLTED TO POSTS WITH LOCK WASHER AND BOLTED CONNECTION
AutoCAD SHX Text
2X12 STAIR STRINGER WITH SOLID 2X12 OUTER BOARD
AutoCAD SHX Text
RAMP LANDING
AutoCAD SHX Text DBL. 6X6X12' TIMBERS STACKED AND LAGGED TOGETHER TO RECEIVE 2X12 JOISTS BY HANGERS. COUNTERSINK BELOW GRADE TO CREATE A FLUSH DECK BOARD TO GRADE
AutoCAD SHX Text
BOATHOUSE
AutoCAD SHX Text
DBL 2X12 SIMPSON STAIR JOIST HANGER
AutoCAD SHX Text
DBL 2X12 CARRIAGE BOLTED TO POSTS WITH LOCK WASHER AND BOLTED CONNECTION
AutoCAD SHX Text
POST CENTER OT CENTER
AutoCAD SHX Text
POST CENTER OT CENTER
AutoCAD SHX Text
POST CENTER OT CENTER
POST CENTER OT CENTER
3'-8 "+/- F.V.12"+/- F.V.
AutoCAD SHX Text
EXISTING WOOD RAMP, STEPS, AND PORCH/DECK
AutoCAD SHX Text
EXISTING WOOD RAMP, STEPS, AND PORCH/DECK
AutoCAD SHX Text
BOATHOUSE
AutoCAD SHX Text
RAMP RAILING ELEVATION
AutoCAD SHX Text
DECK AND STAIR ELEVATION
AutoCAD SHX Text
ENLARGED RAILING ELEVATION
AutoCAD SHX Text RAILING ELEVATIONS SHOWN AS BASIS OF DESIGN TO EXISTING RAMP, DECK, AND STAIR. THE CONTRACTOR SHALL SUBMIT FULL SHOP DRAWINGS TO THE COR FOR REVIEW AND WRITTEN APPROVAL TO DEMONSTRATE UNDERSTANDING OF DIMENSIONS AND FABRICATION DETAILS TO FIT TO EXISTING WOOD STRUCTURES RAILING DIMENSIONS FOR HEIGHTS, SPACING OF MEMBERS, AND STEEL DIAMETER REQUIREMENTS SHALL MEET THE ARCHITECTURAL BARRIER ACT ACCESSIBLITY STANDARDS (ABAAS)
AutoCAD SHX Text
3'-2" TOP OF RAIL
AutoCAD SHX Text 1'-0"
AutoCAD SHX Text
EXTEND RAILING 1'-0" BEYOND END OF RAMP
AutoCAD SHX Text 1'-10"
AutoCAD SHX Text 4 "12"
AutoCAD SHX Text 20'-1"+/- F.V.
AutoCAD SHX Text
EQUALLY SPACE INTERMEDIATE POSTS, 5'-0" - 6'-0" MAX, TYP.
AutoCAD SHX Text 2'-6"
AutoCAD SHX Text BEGIN 3'-6" GUARDRAIL HEIGHT AND 3/4" INTERMEDIATE STEEL RODS SPACED 4" O.C. AT POINT WHERE DECKING SURFACE ABOVE GRADE IS 2'-6"
AutoCAD SHX Text 10'-10 "+/- F.V.12"+/- F.V.
AutoCAD SHX Text 1 1/2" STEEL PIPE RAILING WELDED CONSTRUCTION WITH FLANGE BASE TO LAG SCREW TO WOOD FRAMING.
AutoCAD SHX Text 3'-6"
AutoCAD SHX Text NOTE - PLACE HANDRAIL LOWER PORTION OF RAILING TO BE CONTINUOUS IN ALIGNMENT WITH LOCATION OF HANDRAIL WITHIN GUARDRAIL CONFIGURATION. MEANING, FLANGES AND LOWER HANDRAIL TO BE INSET FURTHER IN FROM EDGES OF WOOD RAMP.
AutoCAD SHX Text LOWER RAMP HANDRAIL ALIGNMENT INSET TO ALLOW CONTINUOUS GRAB HANDRAIL ENTIRE RUN OF RAMP.
AutoCAD SHX Text 10'-10 "+/- F.V.12"+/- F.V.
AutoCAD SHX Text 3'-6"
AutoCAD SHX Text
EQUALLY SPACE INTERMEDIATE POSTS, 5'-0" - 6'-0" MAX, TYP.
AutoCAD SHX Text 2'-1"
AutoCAD SHX Text 21'-5 "+/- F.V.34"+/- F.V.
AutoCAD SHX Text 2'-11"+/- F.V.
AutoCAD SHX Text
RAMP
AutoCAD SHX Text 3'-2"
AutoCAD SHX Text 1'-0"
AutoCAD SHX Text 1 1/2" STEEL PIPE RAILING WELDED CONSTRUCTION WITH FLANGE BASE TO LAG SCREW TO WOOD FRAMING.
AutoCAD SHX Text 7'-1 "+/- F.V.58"+/- F.V.
AutoCAD SHX Text 1'-4"
AutoCAD SHX Text
1 1/2" O.D. STL. PIPE HANDRAIL
AutoCAD SHX Text
1 " CLR12" CLR
AutoCAD SHX Text 3'-6"
AutoCAD SHX Text
3'-2" TOP OF RAIL
AutoCAD SHX Text 4" O.C.
AutoCAD SHX Text 4"
AutoCAD SHX Text 1'-10"
AutoCAD SHX Text
1 1/2" O.D. STL. PIPE PRIMARY HORIZONTAL AND VERTICAL PIPES
AutoCAD SHX Text
3/4" STEEL GUARDRAIL SECONDARY MEMBERS
AutoCAD SHX Text STEEL FLANGE WELDED TO VERTICAL PIPES. LAG TO WOOD DECKING/FRAMING A MINIMUM 3 POINTS OF CONNECTION / 4 POINTS MAXIMUM.
AutoCAD SHX Text
AutoCAD SHX Text 2.5'
AutoCAD SHX Text 5'
AutoCAD SHX Text 10'
AutoCAD SHX Text
AutoCAD SHX Text 2.5'
AutoCAD SHX Text 5'
AutoCAD SHX Text 10'
NO SCALE
ENLARGED RAILING SECTION
AutoCAD SHX Text 2'-10"
AutoCAD SHX Text 4"
AutoCAD SHX Text
1 1/2" O.D. STL. PIPE PRIMARY HORIZONTAL AND VERTICAL PIPES
AutoCAD SHX Text STEEL FLANGE WELDED TO VERTICAL PIPES. LAG TO WOOD DECKING/FRAMING A MINIMUM 3 POINTS OF CONNECTION / 4 POINTS MAXIMUM.
AutoCAD SHX Text
NO SCALE
AutoCAD SHX Text
2'-10" TOP OF RAIL
AutoCAD SHX Text FIELD VERIFY PRIOR TO RAIL FABRICATION THAT OVERALL LENGTH OF RAIL WITH FLANGE DOES NOT PROJECT BEYOND THE MERGING OF SLOPED AND LEVEL FLOORS WHICH COULD BECOME A TRIPPING HAZARD
AutoCAD SHX Text OFFSET RAILING 3" MIN - 4"MAX FROM FACE OF EXISTING WALL. ENSURE MOUNTING FLANGE DOES NOT CONFLICT.
AutoCAD SHX Text 39'-7 "+/- F.V.12"+/- F.V.
AutoCAD SHX Text FIELD VERIFY PRIOR TO PRODUCING SHOP DRAWINGS THAT RAILING IS COMPRISED OF EQUALLY SPACED POSTS NOT EXCEEDING 6'-0" CENTERS (5'-8" SPACING SHOWN HERE - F.V.)
AutoCAD SHX Text
INTERIOR RAIL ELEVATION
AutoCAD SHX Text
AutoCAD SHX Text 2.5'
AutoCAD SHX Text 5'
10'
| Boathouse Deck_Framing Plan_11July25 |
| Sheets and Views |
| Model |
| BOATHOUSE EXTERIOR RAILING EXHIBIT (1) |
| Sheets and Views |
| Model |
| BOATHOUSE INTERIOR RAILING EXHIBIT |
| Sheets and Views |
| Model |
File details come from the government source that posted it. Updated .