B08_Solicitation_Attachment_B_Construction_Documents.pdf

Minute Man National Historical Park

A T T A C H M E N T B : C O N S T R U C T I O N D O C U M E N T S

National Park Service | Harpers Ferry Center | April 2026

Minute Man National Historical Park | National Park Service April 2026| Construction Documents 2

General Notes

Scale: N/A

Since its introduction in 1952, the NPS Arrowhead logo has become a well recognized symbol of the agency. Changes to the logo, adopted in 2001, helped to ensure that the Arrowhead appears more often, more consistently, and more legibly on all NPS communication materials, including signs. The UniGuide Sign Standards prescribe the use of the NPS Arrowhead on selected Park and Facility Identification signs, and on specified Roadway Signs, including Pathfinders.

The Arrowhead Symbol is to be considered all inclusive. The Arrowhead should not be altered or redrawn, nor should any element within the Arrowhead be removed, replaced, or modified.

NPS Arrowhead

Used for headers, footers, and text.

Used to indicate accessibility.

Used on parking signage.

Used on traffic signage for warning or road hazard messaging.

Used on traffic signage for prohibitive and danger messaging.

Secondary Color Palette

Brown

PMS 1615 C

CMYK 36 60 100 26

FHWA Brown

PMS 469 C

CMYK 21 70 92 70

FHWA Black PMS Black C

CMYK 100 100 100 100

Green

PMS 553 C

CMYK 36 60 100 26

Warm Gray 2 PMS Warm Gray 2 C

CMYK C6 M7 Y10 K11

Black PMS Black 6 C

CMYK 100 100 100 100

FHWA Yellow

PMS 124 CV

CMYK 6 31 100 0

ADA Blue

PMS 2945 C

CMYK 100 73 20 7

FHWA Red

PMS 187 C

CMYK 23 100 88 15

Parking Green

PMS 341 C

CMYK 62 14 91 0

White PMS White C

CMYK 0 0 0 0

Color

Primary Color Palette

Minute Man National Historical Park | National Park Service April 2026| Construction Documents 3

General Notes

Scale: N/A

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz 1234567890($?!&-—“”,.:;)

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz 1234567890($?!&-—“”,.:;)

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz 1234567890($?!&-—“”,.:;)

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz 1234567890($?!&-— “”,.:;)

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz 1234567890($?!&-—“”,.:;)

Highway Gothic – D (Regular)

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz 1234567890($?!&-—“”,.:;)

NPS Rawlinson (Bold)

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz 1234567890($?!&-— “”,.:;)

NPS Rawlinson (Book)

Highway Gothic – C (Narrow)

Frutiger 75 Black

Frutiger 65 Bold

Frutiger 57 Condensed

Typefaces

Typography These typefaces were selected because they are highly legible, contemporary, and readily available to contractors and/or sign coordinators.

Arrows

On directional signage only use arrows that point left, right, straight ahead, or straight at a 45° angle. Never use an arrow that points down as it is confusing to visitors. Everyone interprets them differently and, generally speaking, visitors do not usually need to know where they have come from (destinations behind them).

If you are faced with a situation where you need to use an arrow that faces down, it is always better to add another panel that is either on the back of or perpendicular to the first. Moving that information to a second panel will usually allow you to use a left, right, or straight (up) arrow. There is a set of arrows (shown below in the third line) for use in complex situations (e.g. when a destination is around a corner or when a visitor must turn around). These should only be used when the standards arrows can not communicate a message clearly.

Used on all vehicular signage

Used on all pedestrian signage

Correct

Incorrect

Used only in rare situations when standard arrows aren’t clear

There are two arrows used on directional signage. One is used on all vehicular signage.

This arrow is compatible with the Manual on Uniform Traffic Control Devices (MUTCD). The other arrow is used on all pedestrian signage.

Minute Man National Historical Park | National Park Service April 2026| Construction Documents

Cap Height: X”

*This measurement will vary with sign message

Scale: 1” = 1’ 0”

ST - RG-1.0 | Roadway Guide Sign (3 Lines, Arrow)

SIGN SPECIFICATIONS

02Sign Type - RG-1.0 - Roadway Guide Sign (3 Lines, Arrow) Elevation01 02Sign Type - RG-1.0 - Roadway Guide Sign (3 Lines, Arrow)

Elevation02

Sign Type - RG-1.0 - Roadway Guide Sign (3 Lines, Arrow)

Material: 1/8” Thick Aluminum

Graphics Method:

Letter Style - Highway Gothic Letter And Icon Color - PMS White Background Method - Reflective White Vinyl Background Method - Aluminum Panel with Standard PMS Black C / PMS 469 C Type III/IV Very HighIntensity or Equivalent Full Sheet Wrap, Back Painted to Match PMS 469 C Fabrication Method - 3" X 3" X 3/16" Aluminum Structural Angle Sign Support 4" X 4", 4" X 6", 4" X 8", 6" X 8"Douglas Fir, Select Grade Dimensional Timber Post Or Southern Yellow Pine Adhesive Bond Aluminum Angle To Back Of Sign Panel

8"

WIDTH OF LONGEST LINE, 10X MINIMUM3” 3”5/8" 5/8"

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

5 / 8"

5 / 8"

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

6' -0

Minute Man National Historical Park

Minute Man National Historical Park

4" 4"

1 /

2" 4"

1 /

2" 4"

1 /

2"

1 / 2"

WIDTH OF LONGEST LINE, 10X MINIMUM

2026 Update: The Black Bar with "National Park Service, US Department of the Interior" and Arrowhead have been eliminated from Roadway Guide Signs

Minute Man National Historical Park | National Park Service April 2026| Construction Documents

*This measurement will vary with sign message

Scale: 1/2” = 1’ 0”

ST - RG2.0 | Roadway Guide Sign - Directional

SIGN SPECIFICATIONS

02Sign Type - RG-2.0 - Roadway Guide Sign - Directional Elevation01 02Sign Type - RG-2.0 - Roadway Guide Sign - Directional

Elevation02

Sign Type - RG-2.0 - Roadway Guide Sign - Directional

Material: 1/8” Thick Aluminum

Graphics Method:

Letter Style - Highway Gothic Letter And Icon Color - PMS White Background Method - Reflective White Vinyl Background Method - Aluminum Panel with AStandard PMS 469 C Brown Type III/IV Very HighIntensity or Equivalent Full Sheet Wrap, Back Painted to Match PMS 469 C Brown, Fabrication Method - 3" X 3" X 3/16" Aluminum Structural Angle Sign Support 4" X 4", 4" X 6", 4" X 8", 6" X 8"Douglas Fir, Select Grade Dimensional Timber Post Or Southern Yellow Pine Adhesive Bond Aluminum Angle To Back Of Sign Panel

5'-9 1/2"

3/4" 3/4"5'-8"

7" 6" 5"

5' -0

1 / 8"

8' -0

5' -0

1 / 8"

North Bridge

Orchard House

Concord Museum

The Wayside

North Bridge

Orchard House

Concord Museum

The Wayside

1' -4

1 / 2"

3 / 4"

3 / 4"

3' -5

5 / 8"

5 /

8" 6"

7 /

8" 4"

7 /

8" 4"

3 /

4" 4"

7"8 3/8"

5'-9 1/2"

2026 Update: The overall dimensions and cap size for this type of roadway guide signs is reduced to 2 1/4" Cap size with the intent to reduce overall sign size to minimize obstructing views at intersections.

Order of destinations is Concord Museum, Orchard House, The Wayside

Minute Man National Historical Park | National Park Service April 2026 | Construction Documents

*This measurement will vary with sign message

Scale: 1/2” = 1’ 0”

ST - RG | Roadway Guide Sign

02Sign Type - RG - Roadway Guide Sign Elevation01 02Sign Type - RG - Roadway Guide Sign

Section02

Breakaway Wood Post Detail Standard .125 Aluminum Sign Front and Side Elevations

18"

4"

1-1/2 " x 1/2 " Breakaway Slot Note: Slot goes through Entire Depth of Post

PMS 469 C

Panel Back, Mounting Rail, Post Color:

4x6 Wood Posts Painted to Match PMS 469 C Brown

Breakaway or Frangible Coupling as Required by

State and Local Codes

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

1/4" Thick Aluminum Continuous “Z-Bar” Mounting Rail, Painted to Match PMS 469 C Brown

.125 Aluminum Sign Panel with 3/8" Radius Corners, Panel Back Painted to Match PMS 469 C Brown

Avery T6500 White, Type III/IV Very High Intensity or Equivalent Full Sheet Application to Aluminum Panel

Avery to Match PMS 469 C Brown PMS Black Translucent Overlay Film with Compute-Cut Graphics

Line of T-Bar Extrusion Back Welded to Panel Every 12" O.C.

For Support

Panels 96" and Taller Require Three (3) Mounting Rails

Panels 96" and Wider Require Three (3) Posts

GL

D ep en di ng o n

Si gh t Li ne s an d

Lo ca l C on di tio ns

Standard .125 Aluminum Sign Fabrication

U.

Minute Ma

National

Historical Park

*This measurement will vary with sign message

Scale: NTS

ST - RG | Roadway Guide Sign

02Sign Type - RG - Roadway Guide Sign - Aluminum Panel Details Details01

Note:

Splice Location May Need Adjusted To Prevent Disruption of Panel Graphics Horizontal Splices May Not Be Used eq eq eq eq

1"1" 1"1" 1"1" to

6"

5" 5"

4" 4"

144" to 192"

Typical .125 Aluminum Panel Details

Two (2) Splice Locations, Twelve (12) Mounting Holes

Typical .125 Aluminum Panel Details

Three (3) Splice Locations, Sixteen (16) Mounting Holes

Up to 96" to

6"

4" 4"

5" 5" eq eq

1"1"

Typical .125 Aluminum Panel Details

One (1) Splice Locations , Eight (8) Mounting Holes

Typical .125 Aluminum Panel Details

Single Sheet, Four (4) Mounting Holes

Up to

8"

5" 5"

Up to 96"

4" 4" 3/8" Radius Corners (Typ)

5/16" Mounting Holes (Typ)

Panel Back Painted To Match PMS 469 C Brown ( Typ)

5" 5" to

6"

4" 4"

96" to 144" eq eq eq

1"1" 1"1"

2026 Update: All Roadway Guide Signs in this contract are less than 48" sign height and less than 96" wide.

*This measurement will vary with sign message

Scale: NTS

ST - RG | Roadway Guide Sign

02Sign Type - RG - Roadway Guide Sign - Panel-Post Attachment Detail - Top Section Section01

Varies Based on Sign Size, See Chart

1/2"-13 Round Head, Square Neck Galvanized Steel Carriage Bolt with Flat Washer and Hex Nut (Bolt Length Based on Post Size)

4x6 Breakaway Timber Post Painted to Match PMS 469 C Brown

1/4" Thick Aluminum Continuous “Z-Bar” Mounting Rail, Paint to Match PMS 469 C Brown

2"

4" 1/4"-20 x 1" Length Large Diameter Round Head 18-8 Stainless Steel Slotted Machine Screw with Washer and Hex Nut

Note: High Bond Adhesive Tape Along Entire Length of Rail

.125 Aluminum Sign Panel with 3/8" Radius Corners, Panel Back Painted to Match PMS 469 C Brown

Panel Width

60" or smaller

62"– 70"

72"– 94"

96"– 106"

108"– 124"

126"– 166"

168" or larger

Post Inset to Panel Edge

6"

8"

10"

12"

18"

24"

30"

Panel-Post Attachment Detail - Top Section

*This measurement will vary with sign message

Scale: NTS

ST - RG | Roadway Guide Sign

02Sign Type - RG - Roadway Guide Sign - Aluminum Sign Side Section Section01

1/4" Thick Aluminum Continuous “Z-Bar” Mounting Rail, Paint to Match PMS 469 C Brown

.125 Aluminum Sign Panel with 3/8" Radius Corners, Panel Back Painted to Match PMS 469 C Brown

1" x 1" x 1/8" Thick Aluminum Continuous “T-Bar” Extrusion, Back Welded to Panel For Support

6 1/4"

5" 3 3/4"

5"

Note: Very High Bond Adhesive Tape Along Entire Length of Rail

5/16" Diameter Hole to Accept 1/4"-20 Screw

9/16" Diameter Hole to Accept

1/2"-13 Bolt

2 1/2" 2 1/2"

3"

1 1/4" 1 1/4"

1 1/4" 1 1/4"

1"

6 1/2"

Aluminum Sign Side Section

Note: Panel Back, Z-Bar Mounting Rails, and T-Bar Extrusions Painted to Match PMS 469 C Brown

“Z-Bar” Mounting Rail Detail

1/2"-13 x 7 1/2" Long, Round Head, Square Neck Galvanized Steel

Carriage Bolt with Flat Washer and

Hex Nut

4x6 Breakaway Timber Post Painted

Match PMS 469 C Brown

1/4"-20 x 1" Long Large Diameter

Round Head 18-8 Stainless Steel

Slotted Machine Screw with Washer and Hex Nut

*This measurement will vary with sign message

ST - PF-1.0D | Pathfinder Sign (1 Line, Arrow)

Scale: 1” = 1’ 0”

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

WIDTH OF LONGEST LINE, 10X MINIMUM3” 3”5/8" 5/8"

SIGN SPECIFICATIONS

02Sign Type - PF-1.0D - Pathfinder Sign (1 Line, Arrow) Elevation01 02Sign Type - PF-1.0D - Pathfinder Sign (1 Line, Arrow)

Elevation02

Sign Type - PF-1.0D - Pathfinder Sign (1 Line, Arrow)

Material: 1/8” Thick Aluminum

Graphics Method:

Letter Style - Highway Gothic Letter And Icon Color - PMS White Background Method - Reflective White Vinyl Background Method - Aluminum Panel with Standard PMS Black C / PMS 469 C Type III/IV Very HighIntensity or Equivalent Full Sheet Wrap, Back Painted to Match PMS 469 C Fabrication Method - 3" X 3" X 3/16" Aluminum Structural Angle Sign Support 4" X 4", 4" X 6", 4" X 8", 6" X 8"Douglas Fir, Select Grade Dimensional Timber Post Or Southern Yellow Pine Adhesive Bond Aluminum Angle To Back Of Sign Panel H

EI

G

H T

VA

R

IE

S

PE

R

M

ES

SA

G

E 6'

-6

1 /

8"

1 / 2"

1"

1 / 2"

Fiske Hill

Fiske Hill

4" 4"

4" 6"

8"

5 / 8"

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

1 /

4" 5 /

8"

WIDTH OF LONGEST LINE, 10X MINIMUM

2026 Update: The Black Bar with "National Park Service, US Department of the Interior" and Arrowhead have been eliminated from Pathfinder Signs

*This measurement will vary with sign message

Scale: 1” = 1’-0”

ST - PF-1.1D | Pathfinder Sign (1 Line, Arrow, Symbol)

SIGN SPECIFICATIONS

02Sign Type - PF-1.1D - Pathfinder Sign (1 Line, Arrow, Symbol) Elevation01 02Sign Type - PF-1.1D - Pathfinder Sign (1 Line, Arrow, Symbol)

Elevation02

Sign Type - PF-1.0D - Pathfinder Sign (1 Line, Arrow)

Material: 1/8” Thick Aluminum

Graphics Method:

Letter Style - Highway Gothic Letter And Icon Color - PMS White Background Method - Reflective White Vinyl Background Method - Aluminum Panel with Standard PMS Black C / PMS 469 C Type III/IV Very HighIntensity or Equivalent Full Sheet Wrap, Back Painted to Match PMS 469 C Fabrication Method - 3" X 3" X 3/16" Aluminum Structural Angle Sign Support 4" X 4", 4" X 6", 4" X 8", 6" X 8"Douglas Fir, Select Grade Dimensional Timber Post Or Southern Yellow Pine Adhesive Bond Aluminum Angle To Back Of Sign Panel

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

WIDTH OF LONGEST LINE, 10X MINIMUM3” 3”5/8" 5/8"

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

6' -6

1 /

8"

1 / 2"

1"

1 / 2" 8"

5 / 8"

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

1 /

4" 5 /

8"

Parking

Parking

4" 4"

3 /

8" 8"

WIDTH OF LONGEST LINE, 10X MINIMUM

*This measurement will vary with sign message

Scale: 1” = 1’ 0”

ST - PF-2.0D | Pathfinder Sign (2 Lines, Arrow)

8"

8"

WIDTH OF LONGEST LINE, 10X MINIMUM3” 3”5/8" 5/8"

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

SIGN SPECIFICATIONS

02Sign Type - PF-2.0D - Pathfinder Sign (2 Lines, Arrow) Elevation01 02Sign Type - PF-2.0D - Pathfinder Sign (2 Lines, Arrow)

Elevation02

Sign Type - PF-2.0D - Pathfinder Sign (2 Lines, Arrow)

Material: 1/8” Thick Aluminum

Graphics Method:

Letter Style - Highway Gothic Letter And Icon Color - PMS White Background Method - Reflective White Vinyl Background Method - Aluminum Panel with Standard PMS Black C / PMS 469 C Type III/IV Very HighIntensity or Equivalent Full Sheet Wrap, Back Painted to Match PMS 469 C Fabrication Method - 3" X 3" X 3/16" Aluminum Structural Angle Sign Support 4" X 4", 4" X 6", 4" X 8", 6" X 8"Douglas Fir, Select Grade Dimensional Timber Post Or Southern Yellow Pine Adhesive Bond Aluminum Angle To Back Of Sign Panel

1 /

8"

1 / 2"

1"

1 / 2"

5 / 8"

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

5 / 8"

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

6' -6

North Bridge Visitor Center

North Bridge Visitor Center

4" 4"

1 /

2" 4"

1 /

4"

1 / 2"

*This measurement will vary with sign message

Scale: 1” = 1’ 0”

ST - PF-2.1D | Pathfinder Sign (2 Lines, Arrow, Symbol)

8"

8"

WIDTH OF LONGEST LINE, 10X MINIMUM3” 3”5/8" 5/8"

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

SIGN SPECIFICATIONS

02Sign Type - PF-2.1D - Pathfinder Sign (2 Lines, Arrow, Symbol) Elevation01 02Sign Type - PF-2.1D - Pathfinder Sign (2 Lines, Arrow, Symbol)

Elevation02

Sign Type - PF-2.1D - Pathfinder Sign (2 Lines, Arrow, Symbol)

Material: 1/8” Thick Aluminum

Graphics Method:

Letter Style - Highway Gothic Letter And Icon Color - PMS White Background Method - Reflective White Vinyl Background Method - Aluminum Panel with Standard PMS Black C / PMS 469 C Type III/IV Very HighIntensity or Equivalent Full Sheet Wrap, Back Painted to Match PMS 469 C Fabrication Method - 3" X 3" X 3/16" Aluminum Structural Angle Sign Support 4" X 4", 4" X 6", 4" X 8", 6" X 8"Douglas Fir, Select Grade Dimensional Timber Post Or Southern Yellow Pine Adhesive Bond Aluminum Angle To Back Of Sign Panel

1 /

8"

1 / 2"

1"

1 / 2"

4" 4"

1 /

2" 4"

1 /

4"

1 / 2"

5 / 8"

7 /

8" H

EI

G

H T

VA

R

IE

S

PE

R

M

ES

SA

G

E 5 /

8"

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

6' -6

Colonel Barrett House Parking

Colonel Barrett House Parking

*This measurement will vary with sign message

Scale: 1” = 1’ 0”

ST- PF-3.0D | Pathfinder Sign (3 Lines, Arrow)

8"

8"

WIDTH OF LONGEST LINE, 10X MINIMUM3” 3”5/8" 5/8"

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

SIGN SPECIFICATIONS

02Sign Type - PF-3.0D - Pathfinder Sign (3 Lines, Arrow) Elevation01 02Sign Type - PF-3.0D - Pathfinder Sign (3 Lines, Arrow)

Elevation02

Sign Type - PF-3.0D - Pathfinder Sign (3 Lines, Arrow)

Material: 1/8” Thick Aluminum

Graphics Method:

Letter Style - Highway Gothic Letter And Icon Color - PMS White Background Method - Reflective White Vinyl Background Method - Aluminum Panel with Standard PMS Black C / PMS 469 C Type III/IV Very HighIntensity or Equivalent Full Sheet Wrap, Back Painted to Match PMS 469 C Fabrication Method - 3" X 3" X 3/16" Aluminum Structural Angle Sign Support 4" X 4", 4" X 6", 4" X 8", 6" X 8"Douglas Fir, Select Grade Dimensional Timber Post Or Southern Yellow Pine Adhesive Bond Aluminum Angle To Back Of Sign Panel

1 /

8"

1 / 2"

1"

1 / 2"

4" 4"

1 /

2" 4"

1 /

2" 4"

1 /

2"

1 / 2"

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

5 / 8"

5 / 8"

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

6' -6

Ebenezer Fiske House Site

Ebenezer Fiske House Site

*This measurement will vary with sign message

Scale: 1” = 1’

ST- PF-3.1D | Pathfinder Sign (3 Lines, Arrow, Symbol)

8"

8"

WIDTH OF LONGEST LINE, 10X MINIMUM3” 3”5/8" 5/8"

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

SIGN SPECIFICATIONS

02Sign Type - PF-3.1D - Pathfinder Sign (3 Lines, Arrow, Symbol) Elevation01 02Sign Type - PF-3.1D - Pathfinder Sign (3 Lines, Arrow, Symbol)

Elevation02

Sign Type - PF-3.1D - Pathfinder Sign (3 Lines, Arrow, Symbol)

Material: 1/8” Thick Aluminum

Graphics Method:

Letter Style - Highway Gothic Letter And Icon Color - PMS White Background Method - Reflective White Vinyl Background Method - Aluminum Panel with Standard PMS Black C / PMS 469 C Type III/IV Very HighIntensity or Equivalent Full Sheet Wrap, Back Painted to Match PMS 469 C Fabrication Method - 3" X 3" X 3/16" Aluminum Structural Angle Sign Support 4" X 4", 4" X 6", 4" X 8", 6" X 8"Douglas Fir, Select Grade Dimensional Timber Post Or Southern Yellow Pine Adhesive Bond Aluminum Angle To Back Of Sign Panel

1 /

8"

1 / 2"

1"

1 / 2"

4" 4"

1 /

2" 4"

1 /

2" 4"

1 /

2"

5 / 8"

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

5 / 8"

H

EI

G H

T

VA

R

IE

S

PE

R M

ES

SA

G E

6' -6

Fabricate To Trail Trailheadl Signage Specifications

North Bridge Visitor Center Parking

North Bridge Visitor Center Parking

*This measurement will vary with sign message

Scale: NTS

ST- PF | Pathfinder Sign

02Sign Type - PF- Pathfinder Elevation01 02Sign Type - PF- Pathfinder

Section02

Breakaway Wood Post Detail Standard .125 Aluminum Sign Front and Side Elevations

18"

4"

1-1/2 " x 1/2 " Breakaway Slot Note: Slot goes through Entire Depth of Post

PMS 469 C

Panel Back, Mounting Rail, Post Color:

Breakaway or Frangible Coupling as Required by

State and Local Codes

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

1/4" Thick Aluminum Continuous “Z-Bar” Mounting Rail, Painted to Match PMS 469 C Brown

.125 Aluminum Sign Panel with 3/8" Radius Corners, Panel Back Painted to Match PMS 469 C Brown

Avery T6500 White, Type III/IV Very High Intensity or Equivalent Full Sheet Application to Aluminum Panel

Avery to Match PMS 469 C Brown PMS Black Translucent Overlay Film with Compute-Cut Graphics

Line of T-Bar Extrusion Back Welded to Panel Every 12" O.C.

For Support

Panels 96" and Taller Require Three (3) Mounting Rails

Panels 96" and Wider Require Three (3) Posts

GL

D ep en di ng o n

Si gh t Li ne s an d

Lo ca l C on di tio ns

Standard .125 Aluminum Sign Fabrication

Fiske Hill 4x6 Wood Posts Painted to Match PMS 469 C Brown

*This measurement will vary with sign message

Scale: NTS

ST- PF | Pathfinder Sign

Note:

Splice Location May Need Adjusted To Prevent Disruption of Panel Graphics Horizontal Splices May Not Be Used eq eq eq eq

1"1" 1"1" 1"1" to

6"

5" 5"

4" 4"

144" to 192"

Typical .125 Aluminum Panel Details

Two (2) Splice Locations, Twelve (12) Mounting Holes

Typical .125 Aluminum Panel Details

Three (3) Splice Locations, Sixteen (16) Mounting Holes

Up to 96" to

6"

4" 4"

5" 5" eq eq

1"1"

Typical .125 Aluminum Panel Details

One (1) Splice Locations , Eight (8) Mounting Holes

Typical .125 Aluminum Panel Details

Single Sheet, Four (4) Mounting Holes

Up to

8"

5" 5"

Up to 96"

4" 4" 3/8" Radius Corners (Typ)

5/16" Mounting Holes (Typ)

Panel Back Painted To Match PMS 469 C Brown ( Typ)

5" 5" to

6"

4" 4"

96" to 144" eq eq eq

1"1" 1"1"

02Sign Type - PF - Pathfinder - Aluminum Panel Details Details01

2025 Update: All Pathfinder Signs in this contract are less than 48" sign height and less than 96" wide.

*This measurement will vary with sign message

Scale: NTS

ST- PF | Pathfinder Sign

02Sign Type - PF- Pathfinder - Panel-Post Attachment Detail - Top Section Section01

Varies Based on Sign Size, See Chart

1/2"-13 Round Head, Square Neck Galvanized Steel Carriage Bolt with Flat Washer and Hex Nut (Bolt Length Based on Post Size)

4x6 Breakaway Timber Post Painted to Match PMS 469 C Brown

1/4" Thick Aluminum Continuous “Z-Bar” Mounting Rail, Paint to Match PMS 469 C Brown

2"

4" 1/4"-20 x 1" Length Large Diameter Round Head 18-8 Stainless Steel Slotted Machine Screw with Washer and Hex Nut

Note: High Bond Adhesive Tape Along Entire Length of Rail

.125 Aluminum Sign Panel with 3/8" Radius Corners, Panel Back Painted to Match PMS 469 C Brown

Panel Width

60" or smaller

62"– 70"

72"– 94"

96"– 106"

108"– 124"

126"– 166"

168" or larger

Post Inset to Panel Edge

6"

8"

10"

12"

18"

24"

30"

Panel-Post Attachment Detail - Top Section

*This measurement will vary with sign message

Scale: NTS

ST- PF | Pathfinder Sign

02Sign Type - PF- Pathfinder - Aluminum Sign Side Section Details01

1/4" Thick Aluminum Continuous “Z-Bar” Mounting Rail, Paint to Match PMS 469 C Brown

.125 Aluminum Sign Panel with 3/8" Radius Corners, Panel Back Painted to Match PMS 469 C Brown

1" x 1" x 1/8" Thick Aluminum Continuous “T-Bar” Extrusion, Back Welded to Panel For Support

6 1/4"

5" 3 3/4"

5"

Note: Very High Bond Adhesive Tape Along Entire Length of Rail

5/16" Diameter Hole to Accept 1/4"-20 Screw

9/16" Diameter Hole to Accept

1/2"-13 Bolt

2 1/2" 2 1/2"

3"

1 1/4" 1 1/4"

1 1/4" 1 1/4"

1"

6 1/2"

Aluminum Sign Side Section

Note: Panel Back, Z-Bar Mounting Rails, and T-Bar Extrusions Painted to Match PMS 469 C Brown

“Z-Bar” Mounting Rail Detail

1/2"-13 x 7 1/2" Long, Round Head, Square Neck Galvanized Steel

Carriage Bolt with Flat Washer and

Hex Nut

4x6 Breakaway Timber Post Painted

Match PMS 469 C Brown

1/4"-20 x 1" Long Large Diameter

Round Head 18-8 Stainless Steel

Slotted Machine Screw with Washer and Hex Nut

Scale: 1” = 1’ 0”

ST- PLRS-1.0 | Parking Lot Regulatory Sign

SIGN SPECIFICATIONS

02Sign Type - PLRS-1.0 - Parking Lot Regulatory Sign Elevation02

02Sign Type - PLRS-1.0 - Parking Lot Regulatory Sign Elevation01

02Sign Type - PLRS-1.0 - Parking Lot Regulatory Sign Elevation03

Sign Type - PLRS-1.0 - Parking Lot Regulatory Sign

Material: 1/8” Thick Aluminum

Graphics Method:

Letter Style - Highway Gothic Letter And Icon Color - PMS White Background Method - Reflective White Vinyl Background Method - Aluminum Panel with Standar PMS 469 C Brown Type III/IV Very HighIntensity or Equivalent Full Sheet Wrap, Back Painted to Match PMS 469 C Brown, Fabrication Method - 3" X 3" X 3/16" Aluminum Structural Angle Sign Support 4" X 4", 4" X 6", 4" X 8", 6" X 8"Douglas Fir, Select Grade Dimensional Timber Post Or Southern Yellow Pine Adhesive Bond Aluminum Angle To Back Of Sign Panel

2' -3

6'

-0

Final height will be determined by the park during the installation phase

3'- 4"

3'-4"

2' -3

3'-3" 1/2"1/2"

2' -2

1 /

2" 1 /

2"

Bus and RV Parking Only

No Idling

Bus and RV Parking Only

No Idling

4" 3"

1 /

8" 3"

Bus and RV Parking Only

No Idling

2026 Update: This sign not included in fabrication contract

Scale: 1” = 1’ 0”

ST - PLRS-2.0 | Parking Lot Regulatory Sign

SIGN SPECIFICATIONS

02Sign Type - PLRS-2.0 - Parking Lot Regulatory Sign Elevation01 02Sign Type - PLRS-2.0 - Parking Lot Regulatory Sign

Elevation02

Sign Type - PLRS-2.0 - Parking Lot Regulatory Sign

Material: 1/8” Thick Aluminum

Graphics Method:

Letter Style - Highway Gothic Letter And Icon Color - PMS White Background Method - Reflective White Vinyl Background Method - Aluminum Panel with Standard PMS 469 C Brown Type III/IV Very HighIntensity or Equivalent Full Sheet Wrap, Back Painted to Match PMS 469 C Brown, Fabrication Method - 3" X 3" X 3/16" Aluminum Structural Angle Sign Support 4" X 4", 4" X 6", 4" X 8", 6" X 8"Douglas Fir, Select Grade Dimensional Timber Post Or Southern Yellow Pine Adhesive Bond Aluminum Angle To Back Of Sign Panel

2' -1

6'

-0

Final height will be determined by the park during the installation phase

3'- 0"

2' -1

1' -1

1" 1 /

2" 1 /

2"

2'-11" 1/2"1/2"

3'-0"

Parking Lot Closes at Sunset

Parking Lot Closes at Sunset

4" 3"

1 /

8" 3"

1 /

8" 3"

2026 Update: "Parking Lot Closes at Sunset" not included in fabrication contract

Scale: 1” = 1’ 0”

ST - PLRS-3.0 | Parking Lot Regulatory Sign

SIGN SPECIFICATIONS

02Sign Type - PLRS-3.0 - Parking Lot Regulatory Sign Elevation01 02Sign Type - PLRS-3.0 - Parking Lot Regulatory Sign

Elevation02

Sign Type - PLRS-3.0 - Parking Lot Regulatory Sign

Material: 1/8” Thick Aluminum

Graphics Method:

Letter Style - Highway Gothic Letter And Icon Color - PMS White Background Method - Reflective White Vinyl Background Method - Aluminum Panel with Standard PMS 469 C Brown Type III/IV Very HighIntensity or Equivalent Full Sheet Wrap, Back Painted to Match PMS 469 C Brown, Fabrication Method - 3" X 3" X 3/16" Aluminum Structural Angle Sign Support 4" X 4", 4" X 6", 4" X 8", 6" X 8"Douglas Fir, Select Grade Dimensional Timber Post Or Southern Yellow Pine Adhesive Bond Aluminum Angle To Back Of Sign Panel

1' -6

1 / 2"

6' -0

Final height will be determined by the park during the installation phase

1' -5

1 / 2"

1 / 2"

1 / 2"

2'-9 1/2" 1/2"1/2"

2'-10 1/2"

Parking on Grass

2'-10 1/2"

1' -6

1 / 2"

4" 3"

1 /

8" 3"

Parking on Grass

2026 Update: "Parking on Grass" not included in fabrication contract

Scale: 1” = 1’ 0”

ST- PLLM | Parking Lot Map

SIGN SPECIFICATIONS

02Sign Type - PLLM - Parking Lot Map Elevation01 02Sign Type - PLLM - Parking Lot Map

Elevation02

Sign Type - PLLM - Parking Lot Map

Material: 1/8” Thick Aluminum

Graphics Method:

Letter Style - Highway Gothic Letter And Icon Color - PMS White Background Method - Reflective White Vinyl Background Method - Aluminum Panel with Standard PMS 469 C Brown - Warm Gray 2 Type III/IV Very HighIntensity or Equivalent Full Sheet Wrap, Back Painted to Match PMS 469 C Brown, Fabrication Method - 3" X 3" X 3/16" Aluminum Structural Angle Sign Support 4" X 4", 4" X 6", 4" X 8", 6" X 8"Douglas Fir, Select Grade Dimensional Timber Post Or Southern Yellow Pine Adhesive Bond Aluminum Angle To Back Of Sign Panel

2' -3

1 / 2"

6' -0

Final height will be determined by the park during the installation phase

4'-4 1/2"

2' -3

1 / 2"

1 / 2"

2' -2

1 / 2"

1 / 2"

4'-3 1/2" 1/2"1/2"

4'-4 1/2"

3 /

4" 4"

3 /

4" 4"

3 /

4" 4"

For Additional Parking Use Grass Median

2026 Update: Cap size for this sign reduced to 3 inches. This sign not in fabrication contract.

Scale: 1” = 1’ 0”

ST - PD | Private Drive

Private Drive

3' -0

SIGN SPECIFICATIONS

02Sign Type - PD - Private Drive Elevation02

02Sign Type - PD - Private Drive Elevation01

Final height will be determined by the park during the installation phase

02Sign Type - PD - Private Drive Elevation03

Sign Type - PD - Private Drive

Material: 1/8” Thick Aluminum

Graphics Method:

Letter Style - Highway Gothic Letter And Icon Color - PMS White Background Method - Reflective White Vinyl Background Method - Aluminum Panel with Standard PMS 469 C Brown Type III/IV Very HighIntensity or Equivalent Full Sheet Wrap, Back Painted to Match PMS 469 C Brown Fabrication Method - 3" X 3" X 3/16" Aluminum Structural Angle Sign Support 4" X 4", 4" X 6", 4" X 8", 6" X 8"Douglas Fir, Select Grade Dimensional Timber Post Or Southern Yellow Pine Adhesive Bond Aluminum Angle To Back Of Sign Panel

1/2" 2'-1" 1/2"

1 / 2"

1' -6

1 / 2"

1 / 2"

1' -7

1 / 2"

2'-2"

Private Drive

Private Drive

Private Drive

2'-2"

1' -7

1 /

2026 Update: "Private Drive" sign not in fabrication contract

ST - RP | Reserved Parking

Scale: 3/8” = 1”

SIGN SPECIFICATIONS

02Sign Type - RP - Reserved Parking Elevation01 02Sign Type - RP - Reserved Parking

End View02 02Sign Type - RP - Secondary Panel Elevation03

1 /

2"

3/4" 5 5/8"

9"

7" 1"1"

RP Reserved Parking

Material: 1/8” Thick Aluminum

Graphics Method:

Letter Style - Highway Gothic Letter and Icon Color - PMS White Background Method - Reflective White Vinyl Background Method - Reflective PMS 341 Vinyl Background Color - PMS White

1/8"

7"

EQ

1 / 2"

1" 1 /

2" 1"

1 / 2"

Final height will be determined by the park during the installation phase

NO IDLING

TURN OFF

ENGINE

9"

Bus and RV Parking

NO IDLING

TURN OFF

ENGINE

5 / 8"

1 / 4"

5 / 8"

1' -4

1' -4

6"

1' -0

1 / 2"

EQ

3 / 4"

1"

1 /

8" 1"

3 / 4"

1" 1 /

2" 1"

2026 Update: Simplify Sign

ST - RP | Reserved Parking

Scale: 3/4” -1’ 0”

Front View

*HARDWARE SHOULD BE PLACED TO AVOID GRAPHICS

ON SIGN FACE.

Plan View

Side View

4 " X 4 " LUMBER NOM.

(3.5" X 3.5" ACTUAL)

GRAPHICS PANEL

3/8" GALV. OR SS VANDAL RESISTANT

WOOD SCREWS (HARDWARE PAINTED

TO MATCH SIGN FACE)

R 1.375"

1' -4

1' -6

7' -0

5' -6

2" 1'

-6

1 /

2"

1 / 2"

02Sign Type - RP - Reserved Parking Wood Post Attached Through Sign Face Elevation / End View01

9"

Final height will be determined by the park during the installation phase

NO IDLING

TURN OFF

ENGINE

Bus Parking

Bus and RV Parking Only

SECONDARY PANEL

2026 Update: Simplify Sign

ST - RP | Reserved Parking

Scale: NTS

CROSS SECTION A-A

4 " X 4 " LUMBER NOM. (3.5 " X 3.5" ACTUAL)

3/8" GALV. OR SS VANDAL RESISTANT WOOD SCREW

(HARDWARE PAINTED TO MATCH SIGN FACE AND

PLACED TO AVOID GRAPHICS)

GRAPHICS PANEL

CROSS SECTION C-C

3/8" GALV. OR SS VANDAL RESISTANT WOOD SCREW

(HARDWARE PAINTED TO MATCH SIGN FACE AND

PLACED TO AVOID GRAPHICS)

6 " X 6 " LUMBER NOM. (5.5 " X 5.5 " ACTUAL)

CROSS SECTION B-B GRAPHICS PANEL

GRAPHICS PANEL

4 " X 4 " LUMBER NOM. (3.5 " X 3.5" ACTUAL)

3/8" GALV. OR SS VANDAL RESISTANT WOOD SCREW

(HARDWARE PAINTED TO MATCH SIGN FACE AND

PLACED TO AVOID GRAPHICS)

02Sign Type - RP - Reserved Parking Wood Post Attached Through Sign Face Elevation01

Scale: 1” = 1’ 0”

ST - PLRS | Parking Lot Regulatory Sign

SINGLE POST

3" X 3" X 3/16" ALUMINUM

STRUCTURAL ANGLE SIGN SUPPORT

4" x 4", 4" x 6", 4" x 8", 6" x 8"

DOUGLAS FIR, SELECT GRADE

DIMENSIONAL TIMBER POST OR

SOUTHERN YELLOW PINE

ADHESIVE BOND ALUMINUM

ANGLE TO BACK OF SIGN PANEL

02Sign Type - PLRS - Parking Lot Regulatory Sign - Panel Connection and Angle Dimensions Details01 02Sign Type - PLRS - Parking Lot Regulatory Sign - Panel Connection and Angle Dimensions

End View02

ALUMINUM PANEL WITH STANDARD PMS 469 C BROWN

TYPE III/IV VERY HIGHINTENSITY OR EQUIVALENT

FULL SHEET WRAP, BACK PAINTED TO MATCH

PMS 469 C BROWN

Scale: NTS

ST - PLRS | Parking Lot Regulatory Sign

3" X 3" X 3/16" ANGLE PLAN VIEW DETAIL

3" X 3" X 3/16" ANGLE SIDE ELEVATION DETAIL

3.00" 1.5"

3.00"

3.00"

4 " x 4", 4" x 6", 4" x 8", or 6" x 8", DOUGLAS FIR, SELECT GRADE

DIMENSIONAL TIMBER POST OR

SOUTHERN YELLOW PINE

CONNECTION PLAN VIEW

A-A

CONNECTION BACK ELEVATION DETAIL

B-B

CONNECTION SIDE ELEVATION DETAIL

AA

3.00"

B

B

1/4"-20 X 4-1/2" STAINLESS

STEEL HEX HEAD CAP

SCREW WITH FLAT WASHER

AND HEX NUT

3" X 3" X 3/16" STRUCTURAL

ALUMINUM ANGLE

HIGH BOND ADHESIVE ALONG

ENTIRE LENGTH OF EACH RAIL

1.00"1.00"(4 x 4) POST (4 x 6) POST

1/8” ALUMINUM PANEL

Ø 0.38"

02Sign Type - PLRS - Parking Lot Regulatory Sign - Panel Connection and Angle Dimensions

Scale: NTS

ST - PLRS | Parking Lot Regulatory Sign

28"

20.00" 24.00" 28.00"

24"

20"

20.00" 24.00" 28.00"

1-LINE PRIMARY LEGEND 2-LINE PRIMARY LEGEND

3-LINE PRIMARY LEGEND 4-LINE PRIMARY LEGEND

SIGNS WITH 4" LEGENDS

Legend Panel Size Post Size Post HAGL Post Length Bracket Width x Height W x L (Qty) (max.) (max.) Length

1-Line 20" x 16" 4" x 4" 1 7'-0" 11'4" 14" 24" x 16" 4" x 4" 1 7'-0" 11'4" 14" 28" x 16" 4" x 4" 1 7'-0" 11'4" 14"

2-Line 20" x 20" 4" x 4" 1 7'-0" 11'8" 18" 24" x 20" 4" x 4" 1 7'-0" 11'8" 18" 28" x 20" 4" x 4" 1 7'-0" 11'8" 18"

3-Line 20" x 24" 4" x 4" 1 7'-0" 12' 22" 24" x 24" 4" x 4" 1 7'-0" 12' 22" 28" x 24" 4" x 4" 1 7'-0" 12' 22"

4-Line 20" x 28" 4" x 4" 1 7'-0" 12'4" 26" 24" x 28" 4" x 6" 1 7'-0" 12'4" 26" 28" x 28" 4" x 6" 1 7'-0" 12'4" 26"

20.00"

4.00" TYP.

24.00" 28.00"

16"

20.00" 24.00" 28.00"

1"

1"

3"

3"

"41 "8

3"

3"

"22 "61

3"

3"

"81 "21

3"

3"

10"

26"

10"

1"

1"

1"

1"

1"

1"

SEE DETAIL A-A

02Sign Type - PLRS-1.0 - Parking Lot Regulatory Sign - Assembly Reference Diagram for 4” Legends

Scale: NTS

ST - PLRS | Parking Lot Regulatory Sign

STABILIZER BLADE

Post Size Width of Screw Size Footing Size

(W) x(L) Blade (W) Length Diameter (Q) 4" x 4" 10" 5" 12" 4" x 6" 12" 7" 14" 4" x 8" 14" 9" 16" 6" x 8" 18" 9" 20"

GRADE

8.00"

13.00"

13.00"

8.00"

48.00"

42.00"

3-1/2" 5-1/2"

7-1/2" DOUBLE FLAT WASHER

3.00"

FOOTING DIAMETER

1/2"-13 X 7" GRADE 2 ZINC PLATED STEEL

HEX HEAD CAP SCREW (MC# 91236A738)

1/2"-13 X 9" GRADE 2 ZINC PLATED STEEL

HEX HEAD CAP SCREW (MC# 91236A742)

1/2"-13 X 5" GRADE 2 ZINC PLATED STEEL

HEX HEAD CAP SCREW (MC# 91236A732)

3" CRUSHED STONE OR GRAVEL

GENERAL NOTE: ALL GRAVEL BELOW BASE

TO HAVE 8 MIL POLYETHYLENE SHEET BETWEEN

GRAVEL AND CONCRETE POUR

WL

Q

Q

STABILIZER BLADE: 1/4" X 42"

GALVANIZED OR EPOXY COATED WITH

ENTIRE EMBEDED ASSEMBLY FIELD

COATED WITH BITUMINOUS ROOFING

CEMENT BEFORE EMBEDMENT (SEE

SCHEDULE FOR FOOTING DIMENSIONS)

02Sign Type - PLRS - Parking Lot Regulatory Sign - Detail, Embedment and Stabilizer Blade

Scale: 3/8” - 1”

ST - AP1.0 | Reserved Parking

SIGN SPECIFICATIONS

02Sign Type - AP2.0 - Van Accessible Elevation03 02Sign Type - AP2.0 - Van Accessible

End View0402Sign Type - AP1.0 - Reserved Parking Elevation01 02Sign Type - AP1.0 - Reserved Parking

End View02

Reserved Parking

Van Accessible

9"

1' -0

1 /

2"

1 / 2"

3/4" 5 5/8"

7" 3 /

4" 3 /

4"

7" 1"1"

1 / 2"

1" 1 /

2" 1"

1 / 2"

9"

1 /

2"

1' -0

1 /

2"

3/4"

1 / 2"

1" 1 /

2" 1"

1 / 2"

6 1/4"

AP Reserved Parking / Van Accessible

Material: 1/8” Thick Aluminum

Graphics Method:

Letter Style - Highway Gothic Letter and Icon Color - PMS White Background Method - Reflective White Vinyl Background Method - Reflective PMS 2945 Vinyl Background Color - PMS White

1/8"

1/8"

Final height will be determined by the park during the installation phase

Scale: 3/4” = 1’ 0”

ST - AP | Reserved Parking

Reserved Parking

Van Accessible

Front View

*HARDWARE SHOULD BE PLACED TO AVOID GRAPHICS

ON SIGN FACE.

Plan View

Side View

4 " X 4 " LUMBER NOM.

(3.5" X 3.5" ACTUAL)

GRAPHICS PANEL

3/8" GALV. OR SS VANDAL RESISTANT

WOOD SCREWS (HARDWARE PAINTED

TO MATCH SIGN FACE)

R 1.375"

1' -0

7' -0

5' -1

0"

2" 1'

-3 1 /

2"

1 /

2"

1 / 2"

1 /

2"

02Sign Type - AP1.0 / AP2.0 - Reserved Parking Wood Post Attached Through Sign Face Elevation / End View01

Final height will be determined by the park during the installation phase

Scale: NTS

ST - AP | Reserved Parking

CROSS SECTION A-A

4 " X 4 " LUMBER NOM. (3.5 " X 3.5" ACTUAL)

3/8" GALV. OR SS VANDAL RESISTANT WOOD SCREW

(HARDWARE PAINTED TO MATCH SIGN FACE AND

PLACED TO AVOID GRAPHICS)

GRAPHICS PANEL

CROSS SECTION C-C

3/8" GALV. OR SS VANDAL RESISTANT WOOD SCREW

(HARDWARE PAINTED TO MATCH SIGN FACE AND

PLACED TO AVOID GRAPHICS)

6 " X 6 " LUMBER NOM. (5.5 " X 5.5 " ACTUAL)

CROSS SECTION B-B GRAPHICS PANEL

GRAPHICS PANEL

4 " X 4 " LUMBER NOM. (3.5 " X 3.5" ACTUAL)

3/8" GALV. OR SS VANDAL RESISTANT WOOD SCREW

(HARDWARE PAINTED TO MATCH SIGN FACE AND

PLACED TO AVOID GRAPHICS)

02Sign Type - AP1.0 / AP2.0 - Reserved Parking Wood Post Attached Through Sign Face

Scale: 1” = 1’ 0”

ST- Accessible Signage - AP-3.0 | Additional Accessible Parking

SIGN SPECIFICATIONS

02Sign Type - Accessible Signage - AP-3.0 - Additional Accessible Parking Elevation01 02Sign Type - Accessible Signage - AP-3.0 - Additional Accessible Parking

Elevation02

Ap - Additional Accessinle Parking

Material: 1/8” Thick Aluminum

Graphics Method:

Letter Style - Cleaeview Letter And Icon Color - PMS White Background Method - Reflective White Vinyl Background Method - Aluminum Panel with Standard PMS 469 C Brown Type III/IV Very HighIntensity or Equivalent Full Sheet Wrap, Back Painted to Match PMS 469 C Brown, Fabrication Method - 3" X 3" X 3/16" Aluminum Structural Angle Sign Support 4" X 4", 4" X 6", 4" X 8", 6" X 8"Douglas Fir, Select Grade Dimensional Timber Post Or Southern Yellow Pine Adhesive Bond Aluminum Angle To Back Of Sign Panel

5'-2"

1' -9

3 / 4"

3 / 4"

1' -7

1 / 2"

3/4" 3/4"5'-0 1/2"

4" 6 3/8" 3"

4" 3"

3 /

4" 3"

5 /

8" 2"

1' -9

6'

-6

5'-2"

Additional Accessible Parking Behind Building

Left at Lot Exit Then Next Left

Additional Accessible Parking Behind Building

Left at Lot Exit Then Next Left

Scale: 1” = 1’ 0”

ST- Accessible Signage - AP-3.0 | Additional Accessible Parking

DOUBLE POST

ALUMINUM PANEL WITH STANDARD PMS 469 C BROWN

TYPE III/IV VERY HIGHINTENSITY OR EQUIVALENT

FULL SHEET WRAP, BACK PAINTED TO MATCH

PMS 469 C BROWN

3" X 3" X 3/16" ALUMINUM

STRUCTURAL ANGLE SIGN SUPPORT

4" x 4", 4" x 6", 4" x 8", 6" x 8"

DOUGLAS FIR, SELECT GRADE

DIMENSIONAL TIMBER POST OR

SOUTHERN YELLOW PINE

ADHESIVE BOND ALUMINUM

ANGLE TO BACK OF SIGN PANEL

02Sign Type - Accessible Signage - AP-3.0 - Additional Accessible Parking Elevation / End View / Plan View01 02Sign Type - Accessible Signage - AP-3.0 - Additional Accessible Parking

Elevation02

1' -9

6'

-6

5'-2"

Additional Accessible Parking Behind Building

Left at Lot Exit Then Next Left

Scale: NTS

ST- Accessible Signage - AP-3.0 | Additional Accessible Parking

3" X 3" X 3/16" ANGLE PLAN VIEW DETAIL

3" X 3" X 3/16" ANGLE SIDE ELEVATION DETAIL

3.00" 1.5"

3.00"

3.00"

4 " x 4", 4" x 6", 4" x 8", or 6" x 8", DOUGLAS FIR, SELECT GRADE

DIMENSIONAL TIMBER POST OR

SOUTHERN YELLOW PINE

CONNECTION PLAN VIEW

A-A

CONNECTION BACK ELEVATION DETAIL

B-B

CONNECTION SIDE ELEVATION DETAIL

AA

3.00"

B

B

1/4"-20 X 4-1/2" STAINLESS

STEEL HEX HEAD CAP

SCREW WITH FLAT WASHER

AND HEX NUT

3" X 3" X 3/16" STRUCTURAL

ALUMINUM ANGLE

HIGH BOND ADHESIVE ALONG

ENTIRE LENGTH OF EACH RAIL

1.00"1.00"(4 x 4) POST (4 x 6) POST

1/8” ALUMINUM PANEL

Ø 0.38"

Sign Type - Accessible Signage - AP-3.0 - Additional Accessible Parking - Panel Connection and Angle Dimensions

Scale: NTS

ST- Accessible Signage - AP-3.0 | Additional Accessible Parking

SIGNS WITH 4" LEGENDS

Legend Panel Size Post Size Posts HAGL Post Bracket Width x Height W x L (Qty.) (max.) Length Length

3-Line 40" x 48" 4" x 6" 2 7'-0" 14' 46" 48" x 48" 4" x 6" 2 7'-0" 14' 46" 56" x 48" 4" x 6" 2 7'-0" 14' 46"

4-Line 40" x 56" 4" x 6" 2 7'-0" 14'8" 54" 48" x 56" 4" x 6" 2 7'-0" 14'8" 54" 56" x 56" 4" x 8" 2 7'-0" 14'8" 54"

3-LINE PRIMARY LEGEND 4-LINE PRIMARY LEGEND

13.75"

9.75" 5.75"

1"

1"

1"

1"

3"

3"

13.33"

46" 13.33"

13.33"

3"

3"

16"

54" 16"

16"

13.75"

9.75" 5.75"

4.00" TYP.

Varies

48.00" 56.00"

Varies

40.00" 40.00" 48.00" 56.00"

SEE DETAIL A-A

02Sign Type - Accessible Signage - AP-3.0 - Additional Accessible Parking - Sign Assembly Reference Diagram for 4” Legends

Scale: NTS

ST- Accessible Signage - AP-3.0 | Additional Accessible Parking

STABILIZER BLADE FOR TRAILBLAZER SIGNS

Post Size Width of Screw Size Footing Size

(W) x(L) Blade (W) Length Diameter (Q) 4" x 4" 10" 5" 12" 4" x 6" 12" 7" 14" 4" x 8" 14" 9" 16" 6" x 8" 18" 9" 20"

GRADE

8.00"

13.00"

13.00"

8.00"

48.00"

42.00"

3-1/2" 5-1/2"

7-1/2" DOUBLE FLAT WASHER

3.00"

FOOTING DIAMETER

1/2"-13 X 7" GRADE 2 ZINC PLATED STEEL

HEX HEAD CAP SCREW (MC# 91236A738)

1/2"-13 X 9" GRADE 2 ZINC PLATED STEEL

HEX HEAD CAP SCREW (MC# 91236A742)

1/2"-13 X 5" GRADE 2 ZINC PLATED STEEL

HEX HEAD CAP SCREW (MC# 91236A732)

3" CRUSHED STONE OR GRAVEL

GENERAL NOTE: ALL GRAVEL BELOW BASE

TO HAVE 8 MIL POLYETHYLENE SHEET BETWEEN

GRAVEL AND CONCRETE POUR

WL

Q

Q

STABILIZER BLADE: 1/4" X 42"

GALVANIZED OR EPOXY COATED WITH

ENTIRE EMBEDED ASSEMBLY FIELD

COATED WITH BITUMINOUS ROOFING

CEMENT BEFORE EMBEDMENT (SEE

SCHEDULE FOR FOOTING DIMENSIONS)

02Sign Type - Accessible Signage - AP-3.0 - Additional Accessible Parking - Detail, Embedment and Stabilizer Blade

Scale: 1/2” = 1’ 0”

ST- Informational Signage INFO-M - Information Kiosk - Medium

SIGN SPECIFICATIONS

02Sign Type - Informational Signage INFO-M - Information Kiosk - Medium Elevation 01 02Sign Type - Informational Signage INFO-M - Information Kiosk - Medium

End View02

INFO-M - Information Kiosk - Medium

Graphics Method:

Insert Map - 0.5" High-Pressure Laminate (Hpl) Header Attach With Countersunk Galv. Or SS Vandal Resistant Hardware

Cabinet:

Painted PMS 469 Fabricate To Trail Information Kiosk Signage Specifications

4' -0

6"

2' -6

1' -8

7' -0

4' -0

6"

2' -6

1' -8

7' -0

5'-3"

6" 4'-3" 6" 6"

4'-0"1 1/2" 1 1/2"

1/2"1/2"

1 1/8"

3 3/4"

1 1/8"

Scale: NTS

ST- Informational Signage INFO-M - Information Kiosk - Medium

Front View

ALUMINUM FRAME

AND BACK PLATE,

REMOVABLE SIDE RAIL

MORTISE & TENON JOINT

TYPICAL, SECURE WITH

GALV. OR SS DECK SCREWS

20"

.7

5"

30"

6"

X

Y

INFORMATION KIOSK, ALUMINUM OR WOOD, MEDIUM, NO ROOF

X Y

3 FEET 3 FEET

4 FEET 4 FEET

4 FEET 6 FEET

5 FEET 5 FEET

KIOSK DIMENSIONS

EXAMPLE SHOWN

0.5" STEEL BRACKET

2 " X 4 " CROSS SUPPORT BEAMS

(WOOD OR ALUMINUM)

SS INDUSTRIAL HINGE

ON EDGE OF FRAME

6 " X 6 " POST

(ALUMINUM)

2 " X 6 " TOP CAP

(WOOD OR ALUMINUM)

0.5" HIGH-PRESSURE

LAMINATE (HPL), ATTACH

WITH ANGLE USING VANDAL

RESISTANT HARDWARE

OR SS HINGE

A A

B B

Side View Single-Sided

Side View Double-Sided

02Sign Type - Informational Signage INFO-M - Information Kiosk - Medium Elevation01 02Sign Type - Informational Signage INFO-M - Information Kiosk - Medium

End View / Section02

SS INDUSTRIAL HINGE

ALUMINUM FRAME AND BACKPLATE

Ø1 " NICAD BUTTON MAGNET

Lock Detail a-a

0.5" HIGH-PRESSURE LAMINATE

(HPL) HEADER ATTACH WITH

COUNTERSUNK GALV. OR SS

VANDAL RESISTANT HARDWARE

1.5" X 1.5" X 0.125 "

ALUMINUM ANGLE ATTACH

WITH COUNTERSUNK

GALV. OR SS VANDAL

RESISTANT HARDWARE

0.125", 2 " ALUMINUM BARSTOCK TO

SECURE THE FRAME WITH GALV. OR SS

VANDAL RESISTANT HARDWARE

6 " X 6 " POST

1.5 " X 1" X 0.125"

STEEL TUBING SPACER AND

MAGNET ATTACHMENT

1.25" X 1.25" X 0.125 "

ALUMINUM ANGLE

2 " X 4 " CROSS BEAMS

02Sign Type - Informational Signage INFO-M - Information Kiosk - Medium Section / Lock Details03

Scale: NTS

ST- Informational Signage INFO-M - Information Kiosk - Medium

Frame Connection Detail B-B Single-Sided

0.125” THICK

ALUMINUM BACKPLATE

SS INDUSTRIAL HINGE WITH

SS PIN ATTACHED TO FRAME

WITH AN 1/8” POP RIVET

1"

1"

1.5"

13.5"

24.5"

2"

1.25 " X 1.25" X 0.125 "

ALUMINUM ANGLE

1.75" X 0.75" X 0.1875 "

ALUMINUM ANGLE

REMOVABLE SIDE RAIL

0.125", 2" ALUMINUM

BARSTOCK

Ø1.0” NCAD

MAGNET

1.5" X 1 " X 0.125 "

STEEL TUBING SPACER AND

MAGNET ATTACHMENT

Frame Connection Detail Double-sided

STEP 2

REMOVE THE SIDE RAIL ON LAST FRAME, REPLACE THE PANEL,

REPLACE THE SIDE RAIL AND SWING THE FRAME CLOSED CONNECTING

WITH THE MAGNET. SECURE IT INTO PLACE WITH HARDWARE AT THE

BASE. REPEAT THE STEPS SEQUENTIALLY UNTIL FRAMES ARE CLOSED.

STEP 1

REMOVE THE ALLEN SCREWS AT THE BASE OF THE FRAME AND

CROSS SUPPORT BEAM. STARTING ON THE LEFT, SWING 1ST

FRAME OPEN. REPEAT THE STEPS SEQUENTIALLY UNTIL ALL

FRAMES ARE OPEN.

1st 2nd

02Sign Type - Informational Signage INFO-M - Information Kiosk - Medium Section / Frame Connection Detail01 02Sign Type - Informational Signage INFO-M - Information Kiosk - Medium

Section / Removable Face Detail02

Scale: 1” = 1’ 0”

ST- TH-L | Trailhead - Large - UP18x36

1'-10"

3' -0

2'

-8

1'-6"

5' -8

5' -8

SIGN SPECIFICATIONS

02Sign Type - TH-L - Trailhead - Large - UP18x36 (Typical for: Battle Road Trail) Elevation / End View01 02Sign Type - TH-L - Trailhead - Large - UP18x36 (Typical for: Battle Road Trail)

Elevation02

Sign Type - TH-L - Trailhead - Large - UP18x36 (Typical for: Battle Road Trail)

Graphics Method:

Insert Map - 0.5" High-Pressure Laminate (Hpl) Header Attach With Countersunk Galv. Or SS Vandal Resistant Hardware

Cabinet:

Painted PMS 469 Fabricate To Trail Trailhead Signage Specifications

Scale: 1” = 1’ 0”

ST- TH-S | Trailhead - Small - UP12x24

1'-4"

2' -0

2'

-8

1'-0"

4' -8

4' -8

SIGN SPECIFICATIONS

02Sign Type - TH-S - Trailhead - Small - UP12x24 (Typical for: Vernal Pool Trail, Parker’s Revenge Path, etc.)

Elevation / End View01 02Sign Type - TH-S - Trailhead - Small - UP12x24 (Typical for: Vernal Pool Trail, Parker’s Revenge Path, etc.)

Elevation02

Sign Type - TH-S - Trailhead - Small - UP12x24 (Typical for: Vernal Pool Trail, Parker’s Revenge Path, etc.)

Graphics Method:

Insert Map - 0.5" High-Pressure Laminate (Hpl) Header Attach With Countersunk Galv. Or SS Vandal Resistant Hardware

Cabinet:

Painted PMS 469 Fabricate To Trail Trailhead Signage

Scale: NTS

ST- TH | Trailhead

2 -

GL

GENERAL NOTE:

ALL BREAKFORMED STEEL

AND ALUMINUM FRAME

EDGES SHALL BE EASED TO

PREVENT SHARP EDGES AND

ALLOW PAINT ADHERENCE.

3/8"

SEE INSTALLATION

OPTIONS

3"2"

1-3/4" 1/2"-20 X 1/2", 18-8

STAINLESS STEEL, FLAT HEAD,

PHILLIPS MACHINE SCREW

NOTE: TOP OF FRAME IS

CONNECTED BY SCREWS

AND IS REMOVABLE

POST CAP WELDED

TO TOP OF POST

1/4"-20, 6061-T6

MACHINE SCREW NUT

WELDED TO

ALUMINUM ANGLE

3/8" DIAMETER,

ALUMINUM DRIVE RIVETS

NOTE: REFER TO RIVET CHART

FOR QUANTITY PER FRAME

3/16" ALUMINUM

CORE PANEL

WELDED TO

ANGLE

.090 TO .125

GRAPHIC PANEL

STANDARD NPS

3/16" ALUMINUM

“F” EXTRUSION

"4 /3

"4 /3

2" X 3" X 1/8"

TUBULAR ALUMINUM

POST

1" X 1" X 3/16"

BREAKFORMED

ALUMINUM ANGLE

1-3/4" X 3/4" X 3/16"

BREAKFORMED

ALUMINUM ANGLE

1/8" DRILLED

WEEP HOLE

NOTE: SEE WEEP

HOLE CHART

Upright Series (UP): 2" x 3" Post

Single-sided Aluminum Fabrication

02Upright Series (UP): 2" x 3" Post Upright Elevation01 02Upright Series (UP): 2" x 3" Post

Side Section Cut02

Scale: NTS

ST- TH | Trailhead

SEE WELD

CHART

1/8" UNDERCUT PANEL

1/ 8"

U N

D

ER

CU

T

PA

N

EL

"8/ 3

"4/ 3

"61/1

3/4"

1/16"

"4/3-1

STANDARD NPS 3/16"

ALUMINUM “F” EXTRUSION

3/8" DIAMETER,

ALUMINUM DRIVE RIVETS

NOTE: REFER TO RIVET CHART

FOR QUANTITY PER FRAME

1/16" GAP FOR

PANEL EXPANSION

LINE OF 3/16"

ALUMINUM FRAME

POST CAP

LINE OF 1/8" UNDERCUT

GRAPHIC PANEL

2" X 3" X 1/8" TUBULAR

ALUMINUM POSTS

3/16" ALUMINUM CORE PANEL WELDED TO

ALUMINUM ANGLE

.090 TO .125 GRAPHIC PANEL

1/16" GAP FOR PANEL EXPANSION

STANDARD NPS 3/16" ALUMINUM

“F” EXTRUSION

2" X 3" X 1/8" TUBULAR

ALUMINUM POSTS

N O

M

IN

AL

D

IM

EN

SI

O

N

/2

Upright Series (UP): 2" x 3" Post

Single-sided Aluminum Fabrication

02Frame Top Section Section02

02Frame Front Elevation Section01

ST- TH | Trailhead

Scale: NTS

02Upright Series (UP): 2" x 3" Post Upright Elevation01 02Upright Series (UP): 2" x 3" Post

Side Section Cut02

GENERAL NOTE:

ALL BREAKFORMED STEEL

AND ALUMINUM FRAME

EDGES SHALL BE EASED TO

PREVENT SHARP EDGES AND

ALLOW PAINT ADHERENCE.

SEE INSTALLATION

OPTIONS

3"2"

5/16"

"4 /3

"4 /3

2"

3/8" DIAMETER,

ALUMINUM DRIVE RIVETS

NOTE: REFER TO RIVET CHART

FOR QUANTITY PER FRAME

2-

GL

1/4"-20 X 1/2", 18-8 STAINLESS STEEL,

FLAT HEAD, PHILLIPS MACHINE SCREW

NOTE: TOP OF FRAME IS CONNECTED

BY SCREW AND IS REMOVABLE

1/4"-20 X 3/8", 18-8 STAINLESS STEEL,

FLAT HEAD, PHILLIPS MACHINE SCREW

1/4"-20, 6061-T6 NUT WELDED

TO ALUMINUM C-CHANNEL

1/4"-20, 6061-T6 NUT WELDED

TO ALUMINUM C-CHANNEL

1/4"-20, 6061-T6 NUT WELDED

TO ALUMINUM C-CHANNEL

1/4"-20, 316 STAINLESS STEEL

NUT WELDED TO STEEL ANGLE

NOTE: EASE TOP EDGE OF POST

.090 TO .125 GRAPHIC PANEL

.125" ALUMINUM CORE PANEL

.125" ALUMINUM

CORE PANEL WELDED

TO C-CHANNEL

.090 TO .125

GRAPHIC PANEL

2" X 3/4" X 1/8"

BREAKFORMED

ALUMINUM C-CHANNEL

1" X 1" X 1/8"

BREAKFORMED

ALUMINUM C-CHANNEL

2" X 3" X 1/8"

TUBULAR ALUMINUM

POST

1/8" DRILLED

WEEP HOLES

NOTE: SEE WEEP

HOLE CHART

2" X 3/4" X 1/8"

BREAKFORMED

ALUMINUM C-CHANNEL

1" X 1" X 1/8"

BREAKFORMED

ALUMINUM C-CHANNEL

Upright Series (UP): 2" x 3" Post

Double-sided Aluminum Fabrication

ST- TH | Trailhead

Scale: NTS

02Frame Top Section Section02

02Frame Front Elevation Section01

POST CAP

1/8" UNDERCUT PANEL

1/ 8"

U N

D

ER

CU

T

PA

N

EL

"61/ 5

"4/ 3

"61/1

3/4"

1/16"

LINE OF 1/8"

ALUMINUM FRAME

LINE OF 1/8" UNDERCUT

GRAPHIC PANEL

2" X 3" X 1/8" TUBULAR

ALUMINUM POSTS

N O

M

IN

AL

D

IM

EN

SI

O

N

/2

1/8" ALUMINUM CORE PANEL

.090 TO .125 GRAPHIC PANEL

1/8" ALUMINUM CORE PANEL

WELDED TO ALUMINUM C-CHANNEL

.090 TO .125 GRAPHIC PANEL

1/16" GAP FOR PANEL

EXPANSION

1" X 1" X 1/8" BREAKFORMED

ALUMINUM C-CHANNEL

2" X 3/4" X 1/8" BREAKFORMED

ALUMINUM C-CHANNEL

2" X 3" X 1/8"TUBULAR ALUMINUM POSTS

1/4"-20 X 3/8", 18-8 STAINLESS STEEL,

FLAT HEAD, PHILLIPS MACHINE SCREW

1/4"-20, 6061-T1 NUT

WELDED TO STEEL C-CHANNEL

SEE WELD

CHART

"2

1" X 1" X 1/8" BREAKFORMED

ALUMINUM C-CHANNEL

3/8" DIAMETER,

ALUMINUM DRIVE RIVETS

NOTE: REFER TO RIVET CHART

FOR QUANTITY PER FRAME

1/16" GAP FOR

PANEL EXPANSION

2" X 3/4" X 1/8" BREAKFORMED

ALUMINUM C-CHANNEL

1/4"-20, 6061-T1 NUT

WELDED TO STEEL C-CHANNEL

1/4"-20 X 3/8", 18-8

STAINLESS STEEL, FLAT HEAD,

PHILLIPS MACHINE SCREW

Upright Series (UP): 2" x 3" Post

Double-sided Aluminum Fabrication

Scale: NTS

ST- TH | Trailhead

GL GL

BASED ON SIGN SIZE

CONCRETE FOOTER

BACKFILL

GRAVEL LAYER

(FOR DRAINAGE)

2X2 OR 2X3

POST

3"

12"

M

IN

IM

UM

, 3 6"

M

AX

IM

UM

6"

Direct Embedment Section01 02Direct Embedment with Mow Ring

Section02

Scale: NTS

ST- TH | Trailhead

GL

GRAVEL LAYER

(FOR DRAINAGE)

3"

1/4" STAINLESS STEEL

THRU BOLT WITH

WASHER AND NUT

SOCKET IOUNT SLEEVE

BACKFILL

BASE POST

12"

M

IN

IM

UM

, 3 6"

M

AX

IM

UM

6"

WIDTH BASED ON SIGN SIZE

3" 3"

2- 1/

4"1- 1/

2" 3/

4" 2- 1/

4"1- 1/

2" 3/

4"

1/ 4"

1/4"

SLEEVE CAP

WELDED TO POST

BOLT HOLE

1/4" STAINLESS STEEL

THRU BOLT WITH

WASHER AND NUT

GL

02Direct Embedment with Socket Mount Section01 02Socket Cap

Front and Side Elevations03

02Socket Cap Detail

Scale: NTS

ST- TH | Trailhead

GL

3/8" BASEPLATE

WELDED TO SIGN POST

NOTE: SEE FOLLOWING

PAGES FOR BASEPLATE

DIMENSIONS

3/8" -16 X 14"

STAINLESS STEEL

J-BOLT WITH

MATCHING NUTS

AND WASHERS

NOTE: FOUR

PER FOOTING

CONCRETE FOOTER

GRAVEL BASE

(FOR DRAINAGE)

BACKFILL

12" MINIMUM

BASED ON SIGN SIZE

M

IN

IM

UM

, 3 6"

M

AX

IM

UM

6"

02Baseplate Mount: Landscape, Elevation

Scale: NTS

ST- TH | Trailhead

GL

3/8" BASEPLATE

WELDED TO SIGN POST

NOTE: SEE FOLLOWING

PAGES FOR BASEPLATE

DIMENSIONS

HARD SURFACE

GROUT

COMPACT BASE

AGGREGATE

3/8" -16 X 14"

STAINLESS STEEL

J-BOLT WITH

MATCHING NUTS

AND WASHERS

NOTE: FOUR

PER FOOTING

CONCRETE FOOTER

GRAVEL BASE

(FOR DRAINAGE)

12" MINIMUM

BASED ON SIGN SIZE

M

IN

IM

UM

, 3 6"

M

AX

IM

UM

6"

02Baseplate Mount: Hard Surface, Elevation

Scale: NTS

ST- TH | Trailhead

GL

BASED ON SIGN SIZE

M

IN

IM

UM

12"

OPTIONAL 6" X 6"

PLATE

BASE POST AND FIN

COATED WITH BASE

METAL PRIMER UP

TO 2" ABOVE GRADE

3" GRAVEL LAYER

BACKFILL

1/8" THICK STABILIZER

FIN BOLTED OR WELDED

TO BASE POST

2" M

AX

10"

02Upright Direct Embed with Stabilizer Fins

Scale: NTS

ST- TH | Trailhead

GL

SOIL

GRAVEL BASE

(FOR DRAINAGE)

1/2" X 3" ALUMINUM

BARSTOCK STABILIZER

WELDED TO POSTS

M

IN

IM

UM

6"

BASED ON SIGN SIZE

02Direct Embed with Stabilizer Bars

Scale: NTS

ST- TH | Trailhead

5"

3/4"

2 1/2"

5"

3/ 4"

2- 1/

2"

HOLE TO ACCEPT

3/8" -16 X 14"

STAINLESS STEEL

J-BOLT

02Baseplate Plan View, 2" x 3" Post

Scale: 3” = 1’ 0”

ST- PP-L | Post and Panel - 6x9

CAUTION

TUNNEL AHEAD

CAUTION

TUNNEL AHEAD

6"

9"

SIGN SPECIFICATIONS

02Sign Type - PP-L - Post and Panel - 6x9 Elevation01 02Sign Type - PP-L - Post and Panel - 6x9

Elevation02

Sign Type - PP-L - Post and Panel - 6x9

Material: 1/8” Thick Aluminum

Graphics Method:

Letter Style - Highway Gothic Letter And Icon Color - PMS White Background Method - Reflective White Vinyl Background Method - Type II Reto-Reflective Sheeting Applied Directly To Aluminum Fabrication Method - 4" X 4", 4" X 6", 4" X 8", 6" X 8"Douglas Fir, Select Grade Dimensional Timber Post Or Southern Yellow Pine Adhesive Bond Aluminum Angle To Back Of Sign Panel

3 / 4"

3 / 4"

5 / 8"

1 / 2"

3 / 8"

1 /

8"

3" 6"

9" 4'

-0

Final height will be determined by the park during the installation phase

202…