B08_Solicitation_Attachment_2_Plans.pdf

PDF 1 MB Posted Jul 25, 2025

Attached to: ACAD - INSTALL GATEHOUSES BOILERS Federal contract opportunity
Solicitation number: 140P4325R0029
Issued by: Department of the Interior National Park Service Northeast Region

About this file

Written by GovTribe AI · Jul 25, 2025

These architectural drawings detail the rehabilitation of gatehouse boilers at Jordan Pond and Brown Mountain in Acadia National Park. The seven-page plan set includes location maps, demolition plans, proposed floor plans, mechanical and electrical details, and technical schedules for multiple buildings across basement and first/second floor levels. The documents are dated 12/15/2024 and cover comprehensive renovation work including mechanical system removals, electrical updates, and structural modifications for the gatehouse facilities, with detailed technical notes and legends describing specific implementation requirements.

The drawings specify technical specifications for boiler replacements, including intake/exhaust air details, heat pump water heater schematics, boiler piping details, and performance schedules. The project is part of solicitation 140P4325R0029, with an estimated contract value between $250,000 and $500,000, involving the National Park Service's Northeast Region and focused on infrastructure upgrades at the Acadia National Park site in Bar Harbor, Maine.

View the file

Other files for this federal contract opportunity

Other files attached to ACAD - INSTALL GATEHOUSES BOILERS, newest first.
File	Type	Posted
Sol_140P4325R0029_Amd_0003.pdf	PDF	Aug 20, 2025
Sol_140P4325R0029_Amd_0002.pdf	PDF	Aug 19, 2025
Sol_140P4325R0029_Amd_0001.pdf	PDF	Aug 7, 2025
B08_Solicitation_Attachment_3_DOL_Wage_Determination_ME20250008.pdf	PDF	Jul 25, 2025
B08_Solicitation_Attachment_5_Construction_Contract_Administration_Provision.docx	DOCX document	Jul 25, 2025
Sol_140P4325R0029.pdf	PDF	Jul 25, 2025
B08_Solicitation_Attachment_1_Specifications.pdf	PDF	Jul 25, 2025
B08_Solicitation_Attachment_4__Limitations_on_Subcontracting_Report_Template.xlsx	XLSX spreadsheet	Jul 25, 2025

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

TECH. REVIEW:

AutoCAD SHX Text

SUB SHEET NO.

AutoCAD SHX Text

PMIS/PKG NO.

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

TITLE OF SHEET

AutoCAD SHX Text

STAMP:

AutoCAD SHX Text

A/E FIRM - 140P4324F0048

AutoCAD SHX Text

PRIME/CIVIL:

AutoCAD SHX Text

HEDEFINE ENGINEERING & DESIGN, INC.

AutoCAD SHX Text

ELLSWORTH, MAINE

AutoCAD SHX Text

MEP ENGINEER:

AutoCAD SHX Text

CARPENTER ASSOCIATES

AutoCAD SHX Text

OLD TOWN, MAINE

AutoCAD SHX Text

LEGEND

AutoCAD SHX Text

REHABILITATE GATEHOUSE BOILERS

AutoCAD SHX Text

JORDAN POND & BROWN MOUNTAIN

AutoCAD SHX Text

AutoCAD SHX Text 60,027

AutoCAD SHX Text

ACADIA NATIONAL PARK

AutoCAD SHX Text

ACAD339899

AutoCAD SHX Text

%%UDUCTWORK STANDARDS AND SYMBOLS

AutoCAD SHX Text

%%UDESCRIPTION

AutoCAD SHX Text %%uPIPING SERVICE LEGEND

AutoCAD SHX Text

6" HWS

AutoCAD SHX Text

%%UNEW

AutoCAD SHX Text %%uEQUIPMENT TAG LEGEND

AutoCAD SHX Text

MOTOR OPERATED DAMPER

AutoCAD SHX Text

%%UEXISTING TO REMAIN

AutoCAD SHX Text

PIPE TURNED UP

AutoCAD SHX Text

PRESSURE RELIEF VALVE

AutoCAD SHX Text

UNION

AutoCAD SHX Text

SHUT-OFF VALVE

AutoCAD SHX Text

%%UHEATING AND VENTING SYMBOLS

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text

THERMOSTAT; H-HEATING, C-COOLING

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text

EXISTING TO REMAIN

AutoCAD SHX Text

EXISTING TO BE REMOVED

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

NEW

AutoCAD SHX Text

TAG

AutoCAD SHX Text

DESIGNATION

AutoCAD SHX Text

PIPE SIZE

AutoCAD SHX Text

SERVICE DESIGNATION

AutoCAD SHX Text

PIPING LINE DESIGNATIONS

AutoCAD SHX Text

MOD

AutoCAD SHX Text L-1

AutoCAD SHX Text

LOUVER DESIGNATION

AutoCAD SHX Text

48" AFF

AutoCAD SHX Text

%%UGENERAL NOTES

AutoCAD SHX Text

1. EXISTING CONDITIONS HAVE BEEN ESTABLISHED BASED ON INFORMATION PROVIDED BY ANP AND EXISTING CONDITIONS HAVE BEEN ESTABLISHED BASED ON INFORMATION PROVIDED BY ANP AND LIMITED SITE VISITS. CONTRACTOR TO VISIT THE SITE AND VERIFY ALL EXISTING CONDITIONS PRIOR TO BIDDING. 2. PIPING SHALL BE RUN AS DIRECT AS POSSIBLE, PARALLEL TO & FORMING RIGHT ANGLES TO PIPING SHALL BE RUN AS DIRECT AS POSSIBLE, PARALLEL TO & FORMING RIGHT ANGLES TO THE LINES OF THE BUILDING, SUPPORTED FROM THE STRUCTURE, FREE FROM POCKETS & SAGS & PITCHED TO LOW POINT DRAINS. 3. LOCATE ALL VALVES FOR EASY ACCESS & OPERATION. DO NOT LOCATE VALVES W/STEMS LOCATE ALL VALVES FOR EASY ACCESS & OPERATION. DO NOT LOCATE VALVES W/STEMS BELOW HORIZONTAL. 4. ALL EXTERIOR WALL PENETRATIONS SHALL BE SEALED WEATHERTIGHT. ALL EXTERIOR WALL PENETRATIONS SHALL BE SEALED WEATHERTIGHT. 5. ALL EQUIPMENT SHALL BE INSTALLED ACCORDING TO MANUFACTURERS' RECOMMENDATIONS. ALL EQUIPMENT SHALL BE INSTALLED ACCORDING TO MANUFACTURERS' RECOMMENDATIONS. 6. WORK SHALL BE DONE IN ACCORDANCE WITH LOCAL AND STATE CODES AND REGULATIONS. WORK SHALL BE DONE IN ACCORDANCE WITH LOCAL AND STATE CODES AND REGULATIONS. 7. MECHANICAL CONTRACTOR SHALL COORDINATE WORK WITH ALL OTHER TRADES. MECHANICAL CONTRACTOR SHALL COORDINATE WORK WITH ALL OTHER TRADES. 8. ALL CUTTING AND PATCHING SHALL BE PROVIDED BY GENERAL CONTRACTOR. ALL CUTTING AND PATCHING SHALL BE PROVIDED BY GENERAL CONTRACTOR. 9. ALL PIPING SHALL BE INSULATED. ALL PIPING SHALL BE INSULATED. 10. ALL PIPING SHALL BE RUN CONCEALED AND ON WARM SIDE OF BUILDING INSULATION WHEREVER ALL PIPING SHALL BE RUN CONCEALED AND ON WARM SIDE OF BUILDING INSULATION WHEREVER POSSIBLE UNLESS NOTED OTHERWISE. 11. PIPING IS SHOWN DIAGRAMMATICALLY. EXACT LOCATION TO BE ADJUSTED AS REQUIRED TO SUIT PIPING IS SHOWN DIAGRAMMATICALLY. EXACT LOCATION TO BE ADJUSTED AS REQUIRED TO SUIT FIELD CONDITIONS. 12. ALL DIMENSIONS ARE APPROXIMATE AND ARE TO BE VERIFIED IN THE FIELD. ALL DIMENSIONS ARE APPROXIMATE AND ARE TO BE VERIFIED IN THE FIELD. 13. ALL REDUCTIONS IN NEW HOT WATER/CHILLED WATER/STEAM PIPE SIZES IN THE DIRECTION OF ALL REDUCTIONS IN NEW HOT WATER/CHILLED WATER/STEAM PIPE SIZES IN THE DIRECTION OF FLOW SHALL BE ACCOMPLISHED WITH INVERTED ECCENTRIC REDUCERS. 14. PROVIDE DRAINS AT ALL LOW POINTS IN THE WATER PIPING SYSTEM. PROVIDE DRAINS AT ALL LOW POINTS IN THE WATER PIPING SYSTEM. 15. COPPER PIPING SHALL BE TYPE 'L' OR 'K'. TYPE 'M' SHALL NOT BE USED FOR THIS PROJECT. COPPER PIPING SHALL BE TYPE 'L' OR 'K'. TYPE 'M' SHALL NOT BE USED FOR THIS PROJECT. 16. ALL HEAT PIPING RUNS SHALL BE INSULATED WITH 1" THICK, UNLESS INDICATED OTHERWISE, ALL HEAT PIPING RUNS SHALL BE INSULATED WITH 1" THICK, UNLESS INDICATED OTHERWISE, GLASS FIBER PIPE INSULATION WITH REINFORCED KRAFT - ALUMINUM FOIL JACKET. VALVES, UNIONS AND FLANGES SHALL NOT BE INSULATED. 18. CONTRACTOR SHALL ASSUME MINOR PIPE AND FITTING REPLACEMENTS SHALL BE REQUIRED AT RUNOUTS/RISER TO RADIATORS ON IN THE LPS/LPC MAINS. FOR CONTRACT PURPOSES ASSUME (2) 5' SECTIONS AND (4) FITTINGS FOR EACH PIPE SIZE IN THE SYSTEM. INCLUDE FOR PIPE SIZES RANGING FROM 1" TO 2-1/2".

AutoCAD SHX Text %%uMISCELLANEOUS ABBREVIATIONS

AutoCAD SHX Text ABOVE FINISHED FLOOR BRITISH THERMAL UNITS COOLING CONDENSATE DRAINAGE COLD WATER DOWN EQUIVALENT DIRECT RADIATION FUEL OIL SUPPLY HOT WATER LOW PRESSURE CONDENSATE LOW PRESSURE STEAM SQUARE FEET

AutoCAD SHX Text

AFF BTU CD CW DN EDR FOS HW LPC LPS SF

AutoCAD SHX Text

ABBREV.

AutoCAD SHX Text

DESIGNATION

AutoCAD SHX Text

CONNECT TO EXISTING

AutoCAD SHX Text

%%UCOMMON ABBREVIATIONS

AutoCAD SHX Text

ABBREV.

AutoCAD SHX Text

DESIGNATION

AutoCAD SHX Text

LOW PRESSURE STEAM

AutoCAD SHX Text

LPS

AutoCAD SHX Text

LPC

AutoCAD SHX Text

LOW PRESSURE CONDENSATE

AutoCAD SHX Text

LPS

AutoCAD SHX Text

LPC

AutoCAD SHX Text 12/10/2024

AutoCAD SHX Text

PIPE TURNED DOWN

AutoCAD SHX Text

EXISTING STEAM RADIATOR

AutoCAD SHX Text

XX SF EDR

12/10/24

BOILER

AutoCAD SHX Text

FFE APROX 6" HIGHER

AutoCAD SHX Text

6" STEP UP

AutoCAD SHX Text

LPC

AutoCAD SHX Text

LPS

AutoCAD SHX Text

LPS/LPC

AutoCAD SHX Text 1 1/2"

AutoCAD SHX Text 1 1/4"

AutoCAD SHX Text 2 1/2"

AutoCAD SHX Text

LPC

AutoCAD SHX Text

LPC

AutoCAD SHX Text 2 1/2"

AutoCAD SHX Text

LPS/LPC

AutoCAD SHX Text

LPC

AutoCAD SHX Text 1 1/4"

AutoCAD SHX Text 2"

AutoCAD SHX Text

LPC

AutoCAD SHX Text

LPS/LPC

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 1/2"

AutoCAD SHX Text V

AutoCAD SHX Text

LPC

AutoCAD SHX Text 1 1/4"

AutoCAD SHX Text

LPS/LPC

AutoCAD SHX Text 2 1/2"

AutoCAD SHX Text 3"

AutoCAD SHX Text V

AutoCAD SHX Text JORDAN POND GATE HOUSE BASEMENT FLOOR HEATING DEMOLITION PLAN SCALE: 3/16"=1'-0" ±

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

TECH. REVIEW:

AutoCAD SHX Text

SUB SHEET NO.

AutoCAD SHX Text

PMIS/PKG NO.

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

TITLE OF SHEET

AutoCAD SHX Text

STAMP:

AutoCAD SHX Text

A/E FIRM - 140P4324F0048

AutoCAD SHX Text

PRIME/CIVIL:

AutoCAD SHX Text

HEDEFINE ENGINEERING & DESIGN, INC.

AutoCAD SHX Text

ELLSWORTH, MAINE

AutoCAD SHX Text

MEP ENGINEER:

AutoCAD SHX Text

CARPENTER ASSOCIATES

AutoCAD SHX Text

OLD TOWN, MAINE

AutoCAD SHX Text

JP DEMOLITION PLAN

AutoCAD SHX Text

REHABILITATE GATEHOUSE BOILERS

AutoCAD SHX Text

JORDAN POND & BROWN MOUNTAIN

AutoCAD SHX Text

AutoCAD SHX Text 60,027

AutoCAD SHX Text

ACADIA NATIONAL PARK

AutoCAD SHX Text

ACAD339899

AutoCAD SHX Text

AutoCAD SHX Text JORDAN POND GATE HOUSE 1ST FLOOR EXISTING HEATING SYSTEM PLAN SCALE: 3/16"=1'-0" ±

AutoCAD SHX Text

1" UP/DN

AutoCAD SHX Text 1"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1"

AutoCAD SHX Text

2" UP/DN

AutoCAD SHX Text

45 SF EDR

AutoCAD SHX Text

56 SF EDR

AutoCAD SHX Text

43-1/4 SF EDR

AutoCAD SHX Text

20 SF EDR

AutoCAD SHX Text

12-1/3 SF EDR

AutoCAD SHX Text

18 SF EDR

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text

45 SF EDR

AutoCAD SHX Text

EXISTING STEAM RADIATOR (TYP)

AutoCAD SHX Text JORDAN POND GATE HOUSE 2ND FLOOR EXISTING HEATING SYSTEM PLAN SCALE: 3/16"=1'-0" ±

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 1"

AutoCAD SHX Text

22-1/2 SF EDR

AutoCAD SHX Text

63-3/4 SF EDR

AutoCAD SHX Text

55 SF EDR

AutoCAD SHX Text

80-3/4 SF EDR

AutoCAD SHX Text

ABBREVIATION:

AutoCAD SHX Text SF = SQUARE FEET EDR = EQUIVALENT DIRECT RADIATION. (1 SF EDR = 240 BTU/HR) DN = DOWN FFE = FINISHED FLOOR ELEVATION CW = COLD WATER EXST = EXISTING JB = JUNCTION BOX

AutoCAD SHX Text

KEY NOTES:

AutoCAD SHX Text REMOVE EXISTING WATER HEATER IN PREPARATION FOR NEW WATER HEATER, AND CONNECTION TO EXISTING WATER PIPING AND ELECTRICAL CIRCUIT. REMOVE EXISTING WEIL-MCLAIN 396 MBH GROSS OUTPUT BOILER, CLOSE BOILER STEAM PIPING, BOILER WATER FEED SYSTEM, FUEL LINE, AND ELECTRICAL WIRING BACK TO LOCAL JB IN PREPARATION FOR NEW BOILER INSTALLATION. CUT PIPING LEVEL AT FLOOR IN PREPARATION TO REROUTE CONDENSATE RETURNS. REMOVE CONDENSATE RETURN PIPING BACK TO BOILER. CUT PIPING FLUSH AT CURB IN PREPARATION FOR REROUTING/REPLACING CONDENSATE RETURN. REMOVE END OF MAIN VENTS AND PREPARE 3/4" VENT RISER FOR EXTENSION. REMOVE EXISTING CLAY FLUE LINER.

AutoCAD SHX Text

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text

STEEL SUPPORT POST

AutoCAD SHX Text

CONCRETE CEILING BEAM

AutoCAD SHX Text

CONCRETE CURB (6"X6")

AutoCAD SHX Text

HATCH LEGEND

AutoCAD SHX Text

EXISTING ELECTRICAL PANEL

AutoCAD SHX Text

BOILER TO BE REMOVED

AutoCAD SHX Text GENERAL MECHANICAL AND ELECTRICAL REMOVALS NOTES: : 1. AN ATTEMPT HAS BEEN MADE TO INDICATE ITEMS FOR REMOVAL. SOME ITEMS REQUIRING REMOVAL MAY INADVERTENTLY NOT BE AN ATTEMPT HAS BEEN MADE TO INDICATE ITEMS FOR REMOVAL. SOME ITEMS REQUIRING REMOVAL MAY INADVERTENTLY NOT BE SHOWN. REMOVE ALL ITEMS AS REQUIRED FOR NEW CONSTRUCTION UNLESS NOTED OTHERWISE. VERIFY EXISTING CONDITIONS IN THE FIELD. 2. ALL REMOVED ITEMS SHALL BECOME THE PROPERTY OF THE CONTRACTOR AND SHALL BE REMOVED FROM THE PREMISES, UNLESS ALL REMOVED ITEMS SHALL BECOME THE PROPERTY OF THE CONTRACTOR AND SHALL BE REMOVED FROM THE PREMISES, UNLESS INDICATED OTHERWISE. 3. REMOVE EXISTING HEATING SYSTEM COMPONENTS AS INDICATED AND REQUIRED TO COMPLETE NEW WORK. REMOVE EXISTING HEATING SYSTEM COMPONENTS AS INDICATED AND REQUIRED TO COMPLETE NEW WORK. 4. REMOVE EXISTING EQUIPMENT ELECTRICAL CONNECTIONS AND WIRING, ETC. AS INDICATED AND REQUIRED TO COMPLETE NEW WORK. REMOVE EXISTING EQUIPMENT ELECTRICAL CONNECTIONS AND WIRING, ETC. AS INDICATED AND REQUIRED TO COMPLETE NEW WORK. REMOVE ALL UNUSED/ABANDONED ELECTRICAL AND POWER SYSTEMS COMPONENTS.

AutoCAD SHX Text GENERAL NOTES: 1. THE CONTRACTOR SHALL CONFIRM ACTUAL CONDITIONS IN THE FIELD PRIOR TO SUBMITTING A BID. THE CONTRACTOR SHALL CONFIRM ACTUAL CONDITIONS IN THE FIELD PRIOR TO SUBMITTING A BID. 2. ALL WORK SHALL BE COMPLETED IN ACCORDANCE WITH LOCAL AND STATE CODES AND REGULATIONS. ALL WORK SHALL BE COMPLETED IN ACCORDANCE WITH LOCAL AND STATE CODES AND REGULATIONS. 3. CONTRACTOR SHALL BE RESPONSIBLE FOR ASSURING THAT ALL BOILER RELATED ELECTRICAL WORK MEETS CURRENT CODE CONTRACTOR SHALL BE RESPONSIBLE FOR ASSURING THAT ALL BOILER RELATED ELECTRICAL WORK MEETS CURRENT CODE REQUIREMENTS AS PART OF THIS WORK. 4. THE CONTRACTOR SHALL BE RESPONSIBLE FOR CONNECTIONS TO NEW AND EXISTING CONTROLS AS REQUIRED FOR A COMPLETE THE CONTRACTOR SHALL BE RESPONSIBLE FOR CONNECTIONS TO NEW AND EXISTING CONTROLS AS REQUIRED FOR A COMPLETE INSTALLATION. 5. CONTRACTOR SHALL INSTALL ALL FUEL PIPING AND REQUIRED ACCESSORIES AS INDICATED OR REQUIRED FOR COMPLETE CODE CONTRACTOR SHALL INSTALL ALL FUEL PIPING AND REQUIRED ACCESSORIES AS INDICATED OR REQUIRED FOR COMPLETE CODE COMPLIANT SYSTEM. 6. ADJUST PIPING AS NEEDED TO CONNECT TO NEW BOILER AND MAINTAIN PROPER FLOW IN EXISTING PIPE RUNS, MATCH VALVES, ADJUST PIPING AS NEEDED TO CONNECT TO NEW BOILER AND MAINTAIN PROPER FLOW IN EXISTING PIPE RUNS, MATCH VALVES, STRAINERS, CIRCUIT SETTERS, ETC. TO DESIRED FLOW AND PIPE DIAMETER. 7. THE SCOPE OF THE PROJECT SHALL INCLUDE THE INSTALLATION OF NEW PIPING, VALVES, TANKS, SENSORS, CONTROLS, BOILER, VENT THE SCOPE OF THE PROJECT SHALL INCLUDE THE INSTALLATION OF NEW PIPING, VALVES, TANKS, SENSORS, CONTROLS, BOILER, VENT PIPING, PIPING INSULATION, ETC. 8. EXISTING CONDITION SHOWN ON PLAN OBTAINED FROM HISTORICAL PLANS PROVIDED BY GOVERNMENT.EXISTING CONDITION SHOWN ON PLAN OBTAINED FROM HISTORICAL PLANS PROVIDED BY GOVERNMENT.

AutoCAD SHX Text DEMOLITION NOTES: 1. REMOVE EXISTING BOILER AND ACCESSORIES AS REQUIRED FOR INSTALLATION OF NEW BOILER. REMOVE EXISTING BOILER AND ACCESSORIES AS REQUIRED FOR INSTALLATION OF NEW BOILER. 2. CONTRACTOR IS RESPONSIBLE TO VISIT SITE AND VERIFY EXISTING CONDITIONS. CONTRACTOR IS RESPONSIBLE TO VISIT SITE AND VERIFY EXISTING CONDITIONS. 3. REMOVE EXISTING BURNER. REMOVE ANY UNUSED WIRING BACK TO ELECTRICAL PANEL. REUSE EXISTING CONDUIT AND WIRING SO FAR REMOVE EXISTING BURNER. REMOVE ANY UNUSED WIRING BACK TO ELECTRICAL PANEL. REUSE EXISTING CONDUIT AND WIRING SO FAR AS PRACTICAL AND MODIFY AS REQUIRED FOR INSTALLATION OF NEW BOILER. 4. CONTRACTOR SHALL CUT PIPING AT LOCATIONS SHOWN ON PLANS.CONTRACTOR SHALL CUT PIPING AT LOCATIONS SHOWN ON PLANS.

AutoCAD SHX Text

LEGEND:

AutoCAD SHX Text T

AutoCAD SHX Text

PIPING UP PIPING DOWN CONNECT TO EXISTING THERMOSTAT

AutoCAD SHX Text T

AutoCAD SHX Text

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1"

AutoCAD SHX Text

31.5 SF EDR

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text

35 SF EDR

AutoCAD SHX Text

35 SF EDR

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

39 SF EDR BELOW WINDOW SEAT

AutoCAD SHX Text

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

WET RETURN (LPC) IN CONCRETE. ABANDON IN PLACE

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text

EXIST CW TO BOILER.

AutoCAD SHX Text

AutoCAD SHX Text 1'-0'

AutoCAD SHX Text

AutoCAD SHX Text 6'

AutoCAD SHX Text 3'

AutoCAD SHX Text

SCALE: 3/16"=

AutoCAD SHX Text 12/10/2024

AutoCAD SHX Text

EXISTING OIL STORAGE TANK

AutoCAD SHX Text

EXISTING WATER HEATER

AutoCAD SHX Text

EXISTING WELL WATER TANK TO REMAIN

AutoCAD SHX Text

NOTE: DEMOLITION LIMITED TO BASEMENT, EXCEPT FLUE LINER.

AutoCAD SHX Text

NOTE: DEMOLITION LIMITED TO BASEMENT, EXCEPT FLUE LINER.

AutoCAD SHX Text ASBESTOS DEMOLITION NOTES: 1. THIS PROJECT WILL INCLUDE THE REMOVAL AND DISPOSAL OF ASBESTOS CONTAINING MATERIAL. THIS PROJECT WILL INCLUDE THE REMOVAL AND DISPOSAL OF ASBESTOS CONTAINING MATERIAL. 2. HAZARDOUS MATERIALS INVESTIGATION INDICATES THAT PIPE ELBOWS FITTINGS CONTAIN ASBESTOS AND THE BOILER IS PRESUMED TO HAZARDOUS MATERIALS INVESTIGATION INDICATES THAT PIPE ELBOWS FITTINGS CONTAIN ASBESTOS AND THE BOILER IS PRESUMED TO CONTAIN ASBESTOS. SEE APPENDIX A IN SPECIFICATIONS FOR MORE DETAILS. 3. ALL ASBESTOS REMOVAL ACTIVITIES SHALL BE CONDUCTED BY A MAINE DEP LICENSED ASBESTOS CONTRACTOR. ALL ASBESTOS REMOVAL ACTIVITIES SHALL BE CONDUCTED BY A MAINE DEP LICENSED ASBESTOS CONTRACTOR. 4. CONTRACTOR SHALL PROVIDE A WRITTEN WORK PLAN DETAILING THE METHODS THAT WILL BE USED TO SAFELY REMOVE, HANDLE, CONTRACTOR SHALL PROVIDE A WRITTEN WORK PLAN DETAILING THE METHODS THAT WILL BE USED TO SAFELY REMOVE, HANDLE, TRANSPORT, AND DISPOSE OF THE ASBESTOS CONTAINING MATERIAL. THE WORK PLAN SHALL BE SUBMITTED FOR REVIEW AND APPROVAL BY THE CONTRACTING OFFICER PRIOR TO THE START OF WORK. 5. ALL ASBESTOS WASTE SHALL BE TRANSPORTED TO AND DISPOSED OF IN AN APPROVED ASBESTOS WASTE LANDFILL IN ACCORDANCE ALL ASBESTOS WASTE SHALL BE TRANSPORTED TO AND DISPOSED OF IN AN APPROVED ASBESTOS WASTE LANDFILL IN ACCORDANCE WITH APPLICABLE LOCAL, STATE, AND FEDERAL REGULATIONS. 6. ALL WASTE MANIFESTS SHALL BE SUBMITTED TO THE CONTRACTING OFFICER IMMEDIATELY. FINAL PAYMENT FOR SERVICES WILL NOT BE ALL WASTE MANIFESTS SHALL BE SUBMITTED TO THE CONTRACTING OFFICER IMMEDIATELY. FINAL PAYMENT FOR SERVICES WILL NOT BE MADE UNTIL MANIFESTS ARE RECEIVED.

AutoCAD SHX Text

BOILER

AutoCAD SHX Text

FFE APROX 6" HIGHER

AutoCAD SHX Text

6" STEP UP

AutoCAD SHX Text

LPC

AutoCAD SHX Text

LPS

AutoCAD SHX Text

LPS/LPC

AutoCAD SHX Text V

AutoCAD SHX Text 1"

AutoCAD SHX Text 1 1/2"

AutoCAD SHX Text 1 1/4"

AutoCAD SHX Text

LPC

AutoCAD SHX Text

LPS/LPC

AutoCAD SHX Text

LPC

AutoCAD SHX Text 2 1/2"

AutoCAD SHX Text

LPS/LPC

AutoCAD SHX Text

LPC

AutoCAD SHX Text 1 1/4"

AutoCAD SHX Text 2"

AutoCAD SHX Text

LPC

AutoCAD SHX Text

LPS/LPC

AutoCAD SHX Text 2"

AutoCAD SHX Text 1 1/2"

AutoCAD SHX Text V

AutoCAD SHX Text

LPC

AutoCAD SHX Text 1 1/4"

AutoCAD SHX Text

LPS/LPC

AutoCAD SHX Text 2 1/2"

AutoCAD SHX Text B-2

AutoCAD SHX Text 2"

AutoCAD SHX Text 1/2"

AutoCAD SHX Text

FOS

AutoCAD SHX Text 3/8"

AutoCAD SHX Text

LPC

AutoCAD SHX Text

LPC

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text L-1

AutoCAD SHX Text T

AutoCAD SHX Text V

AutoCAD SHX Text

JORDAN POND GATE HOUSE BASEMENT FLOOR HEATING PROPOSED PLAN SCALE: 3/16"=1'-0" ±

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

TECH. REVIEW:

AutoCAD SHX Text

SUB SHEET NO.

AutoCAD SHX Text

PMIS/PKG NO.

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

TITLE OF SHEET

AutoCAD SHX Text

STAMP:

AutoCAD SHX Text

A/E FIRM - 140P4324F0048

AutoCAD SHX Text

PRIME/CIVIL:

AutoCAD SHX Text

HEDEFINE ENGINEERING & DESIGN, INC.

AutoCAD SHX Text

ELLSWORTH, MAINE

AutoCAD SHX Text

MEP ENGINEER:

AutoCAD SHX Text

CARPENTER ASSOCIATES

AutoCAD SHX Text

OLD TOWN, MAINE

AutoCAD SHX Text

JP PROPOSED PLAN

AutoCAD SHX Text

REHABILITATE GATEHOUSE BOILERS

AutoCAD SHX Text

JORDAN POND & BROWN MOUNTAIN

AutoCAD SHX Text

AutoCAD SHX Text 60,027

AutoCAD SHX Text

ACADIA NATIONAL PARK

AutoCAD SHX Text

ACAD339899

AutoCAD SHX Text

AutoCAD SHX Text JORDAN POND GATE HOUSE 1ST FLOOR EXISTING HEATING SYSTEM PLAN SCALE: 3/16"=1'-0" ±

AutoCAD SHX Text JORDAN POND GATE HOUSE 2ND FLOOR EXISTING HEATING SYSTEM PLAN SCALE: 3/16"=1'-0" ±

AutoCAD SHX Text

KEY NOTES:

AutoCAD SHX Text PROVIDE NEW HEAT PUMP WATER HEATER, TO REPLACE EXISTING WATER HEATER, EQUAL TO STATE WATER HEATERS MODEL HPX-50KHPTNE. 50 GALLON NOMINAL CAPACITY, 3.45 MINIMUM UEF, 66 GALLON FIRST HOUR RATING, AND 10 YEAR WARRANTY. INSTALL IN EXISTING LOCATION, WITH NEW DRAIN PAN ON RAISED PLATFORM, TO ALLOW DRAINAGE OF DRAIN PAN AND CONDENSATE DRAINS, TO NEW CONDENSATE PUMP. PIPE CONDENSATE PUMP TO BASEMENT SINK. CONNECT WATER HEATER TO EXISTING 30 AMP, 2 POLE CIRCUIT, AND PROVIDE NEW 15 AMP, SINGLE POLE CIRCUIT FOR CONDENSATE PUMP. PROVIDE SERVICE BALL VALVES ON INLET AND OUTLET, VACUUM BREAKER, EXPANSION TANK EQUAL TO THERM-X-TROL ST-5, THERMOSTATIC MIXING VALVE MEETING ASSE 1017, HEAT TRAP IN PIPING ON HOT WATER OUTLET, AND OTHER ITEMS AS REQUIRED FOR A COMPLETE SYSTEM. PROVIDE NEW BOILER AS SCHEDULED. PROVIDE CLOSE BOILER PIPING (RISER, HEADER, EQUALIZER, HARTFORD LOOP) PER BOILER MANUFACTURER'S REQUIREMENTS; EXCEPT PROVIDE DROP HEADER, ONE PIPE SIZE LARGER THAN MANUFACTURER'S REQUIREMENTS. PROVIDE PRIMARY AND SECONDARY PROBE-TYPE LWCO; PRIMARY PRESSURE CONTROL (SET 0.5 PSI WITH 1 PSI DIFFERENTIAL) AND SECONDARY PRESSURE CONTROL (SET TO BREAK AT 10 PSI), WITH PIGTAIL, SKIM TAPPING, PRESSURE GAUGE, DRAIN VALVE, SERVICE SWITCH, AND BAROMETRIC DRAFT. PROVIDE BOILER WATER FEEDER EQUIVALENT TO HYDROLEVEL MODEL VXT-120. PROVIDE TIGERLOOP FILTER/DEARATOR AT BURNER. SEE BOILER PIPING DETAIL ON SHEET 7, AND SPECIFICATIONS FOR ADDITIONAL REQUIREMENTS. CONNECT EXISTING LPC DROPS TO NEW FLOOR LEVEL WET RETURN. PROVIDE NEW FLOOR LEVEL CONDENSATE PIPING TO BOILER. PROVIDE NEW BACKFLOW PREVENTER EQUIVALENT TO 1/2" WATTS MODEL 9D, AND NEW BALL VALVE. CONNECT TO NEW WATER FEEDER. EXTEND VENT RISER TO THE EXTENT POSSIBLE (6" MINIMUM, 10" PREFFERED) AND PROVIDE MAIN VENT(S) SIZED TO VENT MAIN PIPING AIR VOLUME IN 3 MINUTES AT 2 OZ PRESSURE. PROVIDE NEW 8" DIAMETER FLUE PIPE FROM BOILER TO CHIMNEY. PROVIDE COPPER FUEL LINE, AT 6'-8" MIN. A.F.F., FROM EXISTING FUEL TANK TO NEW BOILER. PROVIDE 14"H x 26"W (APPROXIMATE, FIELD VERIFY) LOUVER, EQUIVALENT TO RUSKIN MODEL ELF211. COLOR TO BE CHOSEN BY CONTRACTING OFFICER FROM STANDARD KYNAR COLORS. SIZE LOUVER TO OVERLAP EXISTING WINDOW FRAME. SEAL LOUVER FLANGE TO OUTSIDE OF EXISTING FRAME WITH BUTYL GLAZING TAPE, AND CLAMP THROUGH TO ALUMINUM TABS WITH SS SCREWS THROUGH THE LOUVER FLANGE FROM OUTSIDE, ON 8" CENTERS. DO NO PENETRATE EXISTING WINDOW FRAME WITH FASTENERS. PROVIDE 12" x 24" DUCT (WITH CENTER DIVIDER) CONNECTED TO LOUVER. SEAL WATER TIGHT AND PITCH BOTTOM BACK TO LOUVER. PROVIDE 12" W x 12" H MOTOR OPERATED DAMPER (MOD-1) IN OPEN ENDED DUCT. PROVIDE MAKE-ON-RISE THERMOSTAT AT CEILING AND CONNECT TO MOD-1. PROVIDE 12" W x 12" H DUCT, TURNED DOWN TO 12" X 6" DUCT TO WITHIN 6" OF FLOOR. PROVIDE 12" x 6" MOD-2 IN DROP DUCT. INTERLOCK MOD-2 WITH BOILER OPERATION. PROVIDE ALUMINUM BLANK OFF PLATE ADJACENT TO LOUVER TO ACCOMMODATE EXISTING DRYER VENT. MATCH LOUVER FLANGE OUTER DIMENSIONS, AND CONNECT/SEAL TO LOUVER WITH BUTYL TAPE AND ALUMINUM BACKER. PAINT TO MATCH LOUVER. PROVIDE 12" STAINLESS STEEL LINER. EXISTING CLAY FLUE MAY BE IN POOR CONDITION. PROVIDE AND INSTALL 12" STAINLESS STEEL FLUE LINER.

AutoCAD SHX Text

AutoCAD SHX Text GENERAL NOTES: 1. STEAM SUPPLY PIPING TO BE REPLACED FROM BOILER TO MAIN STEAM SUPPLY MAINS. STEAM SUPPLY PIPING TO BE REPLACED FROM BOILER TO MAIN STEAM SUPPLY MAINS. 2. ALL CONDENSATE RETURN PIPING BELOW WATER LINE (WET RETURNS), TO BE REPLACED. ALL CONDENSATE RETURN PIPING BELOW WATER LINE (WET RETURNS), TO BE REPLACED. 3. PIPING FROM OIL, WATER, ETC TO BE REPLACED TO NEAREST CONNECTION, ENSURE PIPING CONNECTION POINT HAS NO PIPING FROM OIL, WATER, ETC TO BE REPLACED TO NEAREST CONNECTION, ENSURE PIPING CONNECTION POINT HAS NO CORROSION 4. CONTRACTOR SHALL INSTALL PIPING INSULATION ON ALL ASSOCIATED STEAM PIPING AND COLD WATER PIPING. CONTRACTOR SHALL INSTALL PIPING INSULATION ON ALL ASSOCIATED STEAM PIPING AND COLD WATER PIPING. 5. CONTRACTOR SHALL BE RESPONSIBLE FOR ASSURING THAT ALL BOILER RELATED WORK MEETS CURRENT CODE CONTRACTOR SHALL BE RESPONSIBLE FOR ASSURING THAT ALL BOILER RELATED WORK MEETS CURRENT CODE REQUIREMENTS AS PART OF THIS WORK. 6. CONTRACTOR SHALL BE RESPONSIBLE FOR ASSURING THAT ALL BOILER CONDITIONS, PIPING, VALVES, ETC ARE SAFE CONTRACTOR SHALL BE RESPONSIBLE FOR ASSURING THAT ALL BOILER CONDITIONS, PIPING, VALVES, ETC ARE SAFE AND IN WORKING ORDER. IF BOILER CONDITIONS, PIPING, VALVES, ETC ARE NOT SAFE, OR HAVE CORROSION, OR ARE DAMAGED, CONTRACTOR MUST CONTACT ENGINEER FOR RESOLUTION. 7. CONTRACTOR TO REPLACE ANY AND ALL CONTROLS THAT PERTAIN TO THE BOILER. VERIFY EXACT CONTROL SEQUENCE CONTRACTOR TO REPLACE ANY AND ALL CONTROLS THAT PERTAIN TO THE BOILER. VERIFY EXACT CONTROL SEQUENCE OF EXISTING BOILERS. CONFIRM WITH GOVERNMENT AND CONTRACTING OFFICER AS NEEDED 8. EXISTING CONDITION SHOWN ON PLAN OBTAINED FROM HISTORICAL PLANS PROVIDED BY GOVERNMENT. EXISTING CONDITION SHOWN ON PLAN OBTAINED FROM HISTORICAL PLANS PROVIDED BY GOVERNMENT. 9. PITCH ALL NEW STEAM MAIN PIPING AT 1" IN 20 FEET MINIMUM. CHECK EXISTING MAINS FOR PITCH AND ADJUST TO PITCH ALL NEW STEAM MAIN PIPING AT 1" IN 20 FEET MINIMUM. CHECK EXISTING MAINS FOR PITCH AND ADJUST TO ELIMINATE ANY LOW POINTS. 10. PROVIDE CONCRETE HOUSEKEEPING PAD AT BOILER. PROVIDE CONCRETE HOUSEKEEPING PAD AT BOILER. 11. BOILERS SHALL HAVE SPRINKLER HEADS INSTALLED ABOVE.BOILERS SHALL HAVE SPRINKLER HEADS INSTALLED ABOVE.

AutoCAD SHX Text 1'-0'

AutoCAD SHX Text

AutoCAD SHX Text 6'

AutoCAD SHX Text 3'

AutoCAD SHX Text

SCALE: 3/16"=

AutoCAD SHX Text

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 1"

AutoCAD SHX Text

22-1/2 SF EDR

AutoCAD SHX Text

63-3/4 SF EDR

AutoCAD SHX Text

55 SF EDR

AutoCAD SHX Text

80-3/4 SF EDR

AutoCAD SHX Text

35 SF EDR

AutoCAD SHX Text

35 SF EDR

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

39 SF EDR BELOW WINDOW SEAT

AutoCAD SHX Text

1" UP/DN

AutoCAD SHX Text 1"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1"

AutoCAD SHX Text

2" UP/DN

AutoCAD SHX Text

45 SF EDR

AutoCAD SHX Text

56 SF EDR

AutoCAD SHX Text

43-1/4 SF EDR

AutoCAD SHX Text

20 SF EDR

AutoCAD SHX Text

12-1/3 SF EDR

AutoCAD SHX Text

18 SF EDR

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text

45 SF EDR

AutoCAD SHX Text

EXISTING STEAM RADIATOR (TYP)

AutoCAD SHX Text T

AutoCAD SHX Text

31.5 SF EDR

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text

EXST ELEC PANEL

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1"

AutoCAD SHX Text

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

PROPOSED WET RETURN (LPC), BELOW STEP UP

AutoCAD SHX Text

EXIST CW

AutoCAD SHX Text

EXST WELL WATER TANK

AutoCAD SHX Text

TO BOILER

AutoCAD SHX Text

WATER FEEDER

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text

ABBREVIATION:

AutoCAD SHX Text SF = SQUARE FEET EDR = EQUIVALENT DIRECT RADIATION. (1 SF EDR = 240 BTU/HR) DN = DOWN FFE = FINISHED FLOOR ELEVATION CW = COLD WATER EXST = EXISTING JB = JUNCTION BOX

AutoCAD SHX Text

STEEL SUPPORT POST

AutoCAD SHX Text

CONCRETE CEILING BEAM

AutoCAD SHX Text

CONCRETE CURB (6"X6")

AutoCAD SHX Text

HATCH LEGEND

AutoCAD SHX Text

LEGEND:

AutoCAD SHX Text T

AutoCAD SHX Text

PIPING UP PIPING DOWN CONNECT TO EXISTING THERMOSTAT

AutoCAD SHX Text

AutoCAD SHX Text 12/10/2024

AutoCAD SHX Text

EXISTING OIL STORAGE TANK

AutoCAD SHX Text

EXISTING WATER HEATER

AutoCAD SHX Text

NOTE: NO NEW WORK ON THIS FLOOR, EXCEPT FOR CHIMNEY LINER.

AutoCAD SHX Text

NOTE: NO NEW WORK ON THIS FLOOR, EXCEPT FOR CHIMNEY LINER.

OIL STORAGE TANK

AutoCAD SHX Text

CRAWL SPACE (NOT USED)

AutoCAD SHX Text

ENCLOSED OIL STORAGE

AutoCAD SHX Text

OIL STORAGE TANK

AutoCAD SHX Text V

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text

LPC

AutoCAD SHX Text

LPC

AutoCAD SHX Text

LPS/LPC

AutoCAD SHX Text

LPC

AutoCAD SHX Text 2-1/2"

AutoCAD SHX Text 3"

AutoCAD SHX Text

LPC

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

TECH. REVIEW:

AutoCAD SHX Text

SUB SHEET NO.

AutoCAD SHX Text

PMIS/PKG NO.

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

TITLE OF SHEET

AutoCAD SHX Text

STAMP:

AutoCAD SHX Text

A/E FIRM - 140P4324F0048

AutoCAD SHX Text

PRIME/CIVIL:

AutoCAD SHX Text

HEDEFINE ENGINEERING & DESIGN, INC.

AutoCAD SHX Text

ELLSWORTH, MAINE

AutoCAD SHX Text

MEP ENGINEER:

AutoCAD SHX Text

CARPENTER ASSOCIATES

AutoCAD SHX Text

OLD TOWN, MAINE

AutoCAD SHX Text

BM DEMOLITION PLAN

AutoCAD SHX Text

REHABILITATE GATEHOUSE BOILERS

AutoCAD SHX Text

JORDAN POND & BROWN MOUNTAIN

AutoCAD SHX Text

AutoCAD SHX Text 60,027

AutoCAD SHX Text

ACADIA NATIONAL PARK

AutoCAD SHX Text

ACAD339899

AutoCAD SHX Text

LEGEND:

AutoCAD SHX Text

KEY NOTES:

AutoCAD SHX Text REMOVE EXISTING WATER HEATER IN PREPARATION FOR NEW WATER HEATER, AND CONNECTION TO EXISTING WATER PIPING AND ELECTRICAL CIRCUIT. REMOVE EXISTING THERMOSTAT. PATCH WALL TO MATCH EXISTING. REMOVE EXISTING BOILER, CLOSE BOILER STEAM PIPING, BOILER WATER FEED SYSTEM, FUEL LINE, AND ELECTRICAL WIRING BACK TO LOCAL JB IN PREPARATION FOR NEW BOILER INSTALLATION. REMOVE BOILER VENT FROM BOILER TO CHIMNEY. REMOVE FUEL OIL PIPING, VALVES AND FILTERS, FROM TANKS TO BOILER. REMOVE FUEL FILL AND VENT PIPING. EXTERIOR AND THROUGH-WALL PIPING MAY BE REUSED. CAP UNUSED FILL/VENT OUTSIDE REMOVE 275 GALLON FUEL OIL TANKS. REMOVE WATER FEED SYSTEM SUFFICIENT FOR CONNECTION TO NEW BOILER. REMOVE END OF MAIN VENT AND PREPARE 3/4" VENT RISER FOR EXTENSION. REMOVE 1-1/2" WET RETURN (LPC) FROM DROPS NEAR STAIR, TO BOILER. APPROXIMATE LIMIT FOR MAIN LPS AND LPC REMOVAL.

AutoCAD SHX Text BROWN MOUNTAIN GATE HOUSE BASEMENT FLOOR HEATING DEMOLITION PLAN SCALE: 3/16"=1'-0" ±

AutoCAD SHX Text BROWN MOUNTAIN GATE HOUSE 1ST FLOOR EXISTING HEATING SYSTEM PLAN SCALE: 3/16"=1'-0" ±

AutoCAD SHX Text BROWN MOUNTAIN GATE HOUSE 2ND FLOOR EXISTING HEATING SYSTEM PLAN SCALE: 3/16"=1'-0" ±

AutoCAD SHX Text

60 SF EDR

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

66 SF EDR

AutoCAD SHX Text

60 SF EDR

AutoCAD SHX Text

54 SF EDR

AutoCAD SHX Text

24.5 SF EDR

AutoCAD SHX Text T

AutoCAD SHX Text

59.5 SF EDR

AutoCAD SHX Text T

AutoCAD SHX Text

PIPING UP PIPING DOWN CONNECT TO EXISTING THERMOSTAT END-OF-MAIN VENT

AutoCAD SHX Text

48 SF EDR

AutoCAD SHX Text

42 SF EDR

AutoCAD SHX Text

59.5 SF EDR

AutoCAD SHX Text X"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

1-1/2" UP/DN

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text

ABBREVIATION:

AutoCAD SHX Text SF=SQUARE FEET EDR=EQUIVALENT DIRECT RADIATION. (1 SF EDR = 240 BTU/HR) DN=DOWN FFE=FINISHED FLOOR ELEVATION CW=COLD WATER EXST=EXISTING LPS=LOW PRESSURE STEAM LPC=LOW PRESSURE CONDENSATE

AutoCAD SHX Text GENERAL NOTES: 1. THE CONTRACTOR SHALL CONFIRM ACTUAL CONDITIONS IN THE FIELD PRIOR TO SUBMITTING A BID. THE CONTRACTOR SHALL CONFIRM ACTUAL CONDITIONS IN THE FIELD PRIOR TO SUBMITTING A BID. 2. ALL WORK SHALL BE COMPLETED IN ACCORDANCE WITH LOCAL AND STATE CODES AND REGULATIONS. ALL WORK SHALL BE COMPLETED IN ACCORDANCE WITH LOCAL AND STATE CODES AND REGULATIONS. 3. CONTRACTOR SHALL BE RESPONSIBLE FOR ASSURING THAT ALL BOILER RELATED ELECTRICAL WORK MEETS CURRENT CODE CONTRACTOR SHALL BE RESPONSIBLE FOR ASSURING THAT ALL BOILER RELATED ELECTRICAL WORK MEETS CURRENT CODE REQUIREMENTS AS PART OF THIS WORK. 4. THE CONTRACTOR SHALL BE RESPONSIBLE FOR CONNECTIONS TO NEW AND EXISTING CONTROLS AS REQUIRED FOR A COMPLETE THE CONTRACTOR SHALL BE RESPONSIBLE FOR CONNECTIONS TO NEW AND EXISTING CONTROLS AS REQUIRED FOR A COMPLETE INSTALLATION. 5. CONTRACTOR SHALL INSTALL ALL FUEL PIPING AND REQUIRED ACCESSORIES AS INDICATED OR REQUIRED FOR COMPLETE CODE CONTRACTOR SHALL INSTALL ALL FUEL PIPING AND REQUIRED ACCESSORIES AS INDICATED OR REQUIRED FOR COMPLETE CODE COMPLIMENT SYSTEM. 6. ADJUST PIPING AS NEEDED TO CONNECT TO NEW BOILER AND MAINTAIN PROPER FLOW IN EXISTING PIPE RUNS, MATCH VALVES, ADJUST PIPING AS NEEDED TO CONNECT TO NEW BOILER AND MAINTAIN PROPER FLOW IN EXISTING PIPE RUNS, MATCH VALVES, STRAINERS, CIRCUIT SETTERS, ETC. TO DESIRED FLOW AND PIPE DIAMETER. 7. THE SCOPE OF THE PROJECT SHALL INCLUDE THE INSTALLATION OF NEW PIPING, VALVES, TANKS, SENSORS, CONTROLS, BOILER, VENT THE SCOPE OF THE PROJECT SHALL INCLUDE THE INSTALLATION OF NEW PIPING, VALVES, TANKS, SENSORS, CONTROLS, BOILER, VENT PIPING, PIPING INSULATION, ETC. 8. CONTRACTOR TO REPLACE ANY AND ALL CONTROLS THAT PERTAIN TO BOILER CONTRACTOR TO REPLACE ANY AND ALL CONTROLS THAT PERTAIN TO BOILER 9. EXISTING CONDITION SHOWN ON PLAN OBTAINED FROM HISTORICAL PLANS PROVIDED BY GOVERNMENT.EXISTING CONDITION SHOWN ON PLAN OBTAINED FROM HISTORICAL PLANS PROVIDED BY GOVERNMENT.

AutoCAD SHX Text

STEEL SUPPORT POST

AutoCAD SHX Text

CONCRETE CEILING BEAM

AutoCAD SHX Text

CONCRETE CURB (6"X6")

AutoCAD SHX Text

HATCH LEGEND

AutoCAD SHX Text

AutoCAD SHX Text 1"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

LPC

AutoCAD SHX Text

LPS

AutoCAD SHX Text

EXST CW TO BOILER.

AutoCAD SHX Text

TANKS TO BE REPLACED

AutoCAD SHX Text

BOILER TO BE REMOVED

AutoCAD SHX Text

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

CAPPED

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

AutoCAD SHX Text V

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1"

AutoCAD SHX Text

21 SF EDR

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text

BELOW FLOOR

AutoCAD SHX Text

(NOT USED)

AutoCAD SHX Text

AutoCAD SHX Text 1'-0'

AutoCAD SHX Text

AutoCAD SHX Text 6'

AutoCAD SHX Text 3'

AutoCAD SHX Text

SCALE: 3/16"=

AutoCAD SHX Text 12/10/2024

AutoCAD SHX Text

EXISTING WATER HEATER TO BE REMOVED

AutoCAD SHX Text

NOTE: DEMOLITION LIMITED TO BASEMENT.

AutoCAD SHX Text

NOTE: DEMOLITION LIMITED TO BASEMENT.

AutoCAD SHX Text

EXISTING WELL WATER TANK TO REMAIN

AutoCAD SHX Text ASBESTOS DEMOLITION NOTES: 1. THIS PROJECT WILL INCLUDE THE REMOVAL AND DISPOSAL OF ASBESTOS CONTAINING MATERIAL. THIS PROJECT WILL INCLUDE THE REMOVAL AND DISPOSAL OF ASBESTOS CONTAINING MATERIAL. 2. HAZARDOUS MATERIALS INVESTIGATION INDICATES THAT THE BOILER IS PRESUMED TO CONTAIN ASBESTOS. SEE APPENDIX A IN HAZARDOUS MATERIALS INVESTIGATION INDICATES THAT THE BOILER IS PRESUMED TO CONTAIN ASBESTOS. SEE APPENDIX A IN SPECIFICATIONS FOR MORE DETAILS. 3. ALL ASBESTOS REMOVAL ACTIVITIES SHALL BE CONDUCTED BY A MAINE DEP LICENSED ASBESTOS CONTRACTOR. ALL ASBESTOS REMOVAL ACTIVITIES SHALL BE CONDUCTED BY A MAINE DEP LICENSED ASBESTOS CONTRACTOR. 4. CONTRACTOR SHALL PROVIDE A WRITTEN WORK PLAN DETAILING THE METHODS THAT WILL BE USED TO SAFELY REMOVE, HANDLE, CONTRACTOR SHALL PROVIDE A WRITTEN WORK PLAN DETAILING THE METHODS THAT WILL BE USED TO SAFELY REMOVE, HANDLE, TRANSPORT, AND DISPOSE OF THE ASBESTOS CONTAINING MATERIAL. THE WORK PLAN SHALL BE SUBMITTED FOR REVIEW AND APPROVAL BY THE CONTRACTING OFFICER PRIOR TO THE START OF WORK. 5. ALL ASBESTOS WASTE SHALL BE TRANSPORTED TO AND DISPOSED OF IN AN APPROVED ASBESTOS WASTE LANDFILL IN ACCORDANCE ALL ASBESTOS WASTE SHALL BE TRANSPORTED TO AND DISPOSED OF IN AN APPROVED ASBESTOS WASTE LANDFILL IN ACCORDANCE WITH APPLICABLE LOCAL, STATE, AND FEDERAL REGULATIONS. 6. ALL WASTE MANIFESTS SHALL BE SUBMITTED TO THE CONTRACTING OFFICER IMMEDIATELY. FINAL PAYMENT FOR SERVICES WILL NOT BE ALL WASTE MANIFESTS SHALL BE SUBMITTED TO THE CONTRACTING OFFICER IMMEDIATELY. FINAL PAYMENT FOR SERVICES WILL NOT BE MADE UNTIL MANIFESTS ARE RECEIVED.

AutoCAD SHX Text

CRAWL SPACE (NOT USED)

AutoCAD SHX Text

ENCLOSED OIL STORAGE

AutoCAD SHX Text 2"

AutoCAD SHX Text V

AutoCAD SHX Text 1"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

LPC

AutoCAD SHX Text

LPC

AutoCAD SHX Text

LPS/LPC

AutoCAD SHX Text

LPC

AutoCAD SHX Text 2-1/2"

AutoCAD SHX Text

FOS

AutoCAD SHX Text L-2

AutoCAD SHX Text B-1

AutoCAD SHX Text T

AutoCAD SHX Text V

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

TECH. REVIEW:

AutoCAD SHX Text

SUB SHEET NO.

AutoCAD SHX Text

PMIS/PKG NO.

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

TITLE OF SHEET

AutoCAD SHX Text

STAMP:

AutoCAD SHX Text

A/E FIRM - 140P4324F0048

AutoCAD SHX Text

PRIME/CIVIL:

AutoCAD SHX Text

HEDEFINE ENGINEERING & DESIGN, INC.

AutoCAD SHX Text

ELLSWORTH, MAINE

AutoCAD SHX Text

MEP ENGINEER:

AutoCAD SHX Text

CARPENTER ASSOCIATES

AutoCAD SHX Text

OLD TOWN, MAINE

AutoCAD SHX Text

BM PROPOSED PLAN

AutoCAD SHX Text

REHABILITATE GATEHOUSE BOILERS

AutoCAD SHX Text

JORDAN POND & BROWN MOUNTAIN

AutoCAD SHX Text

AutoCAD SHX Text 60,027

AutoCAD SHX Text

ACADIA NATIONAL PARK

AutoCAD SHX Text

ACAD339899

AutoCAD SHX Text

KEY NOTES:

AutoCAD SHX Text PROVIDE NEW HEAT PUMP WATER HEATER, TO REPLACE EXISTING WATER HEATER, EQUAL TO STATE WATER HEATERS MODEL HPX-50KHPTNE. 50 GALLON NOMINAL CAPACITY, 3.45 MINIMUM UEF, 66 GALLON FIRST HOUR RATING, AND 10 YEAR WARRANTY. INSTALL IN EXISTING LOCATION, WITH NEW DRAIN PAN ON RAISED PLATFORM, TO ALLOW DRAINAGE OF DRAIN PAN AND CONDENSATE DRAINS, TO NEW CONDENSATE PUMP. PIPE CONDENSATE PUMP TO BASEMENT SINK. CONNECT WATER HEATER TO EXISTING 30 AMP, 2 POLE CIRCUIT, AND PROVIDE NEW 15 AMP, SINGLE POLE CIRCUIT FOR CONDENSATE PUMP. PROVIDE SERVICE BALL VALVES ON INLET AND OUTLET, VACUUM BREAKER, EXPANSION TANK EQUAL TO THERM-X-TROL ST-5, THERMOSTATIC MIXING VALVE MEETING ASSE 1017, HEAT TRAP IN PIPING ON HOT WATER OUTLET, AND OTHER ITEMS AS REQUIRED FOR A COMPLETE SYSTEM. PROVIDE 7-DAY, 24-HOUR, PROGRAMMABLE THERMOSTAT. PATCH WALL WHERE EXIST THERMOSTAT WAS REMOVED TO MATCH EXISTING. PROVIDE NEW BOILER AS SCHEDULED. PROVIDE CLOSE BOILER PIPING (RISER, HEADER, EQUALIZER, HARTFORD LOOP) PER BOILER MANUFACTURER'S REQUIREMENTS; EXCEPT PROVIDE DROP HEADER, ONE PIPE SIZE LARGER THAN MANUFACTURER'S REQUIREMENTS. PROVIDE PRIMARY AND SECONDARY PROBE-TYPE LWCO; PRIMARY PRESSURE CONTROL (SET 0.5 PSI WITH 1 PSI DIFFERENTIAL) AND SECONDARY PRESSURE CONTROL (SET TO BREAK AT 10 PSI), WITH PIGTAIL, SKIM TAPPING, PRESSURE GAUGE, DRAIN VALVE, SERVICE SWITCH, AND BAROMETRIC DRAFT. PROVIDE BOILER WATER FEEDER EQUIVALENT TO HYDROLEVEL MODEL VXT-120. PROVIDE NEW 8" DIAMETER FLUE PIPE FROM BOILER TO CHIMNEY. PROVIDE NEW 3/8" SOFT L COPPER TUBE FUEL OIL LINE, IN EMT CONDUIT. PROVIDE FILTER/DEAERATOR AT BOILER; EQUIVALENT TO TIGERLOOP ULTRA MODEL S220-8. PROVIDE SCHEDULE 40 STEEL 2" DIAMETER FUEL FILL PIPING AND 1-1/2” FUEL OIL VENT, COMPLETE FUEL OIL VENT, COMPLETE WITH FILL AND VENT CAPS. EXISTING FILL AND VENT PIPING MAY BE INCORPORATED IN NEW SYSTEM. CAP UNUSED FILL AND VENT OUTDOORS. PROVIDE 275 GALLON NOMINAL CAPACITY, DOUBLE-CONTAINMENT FUEL TANKS, EQUIVALENT TO ROTH MODEL DWT 1000LH. PROVIDE BUSHINGS, VENT WHISTLES, VENT AND FILL HEADERS, DIP TUBES, LEVEL GAUGES, VISUAL LEAK INDICATORS, AND OTHER ACCESSORIES FOR A COMPLETE SYSTEM. EXISTING FILL AND VENT PIPING MAY BE INCORPORATED IN NEW SYSTEM. CAP UNUSED FILL AND VENT OUTDOORS. PROVIDE NEW BACKFLOW PREVENTER EQUIVALENT TO 1/2" WATTS MODEL 9D, AND NEW BALL VALVE. CONNECT TO NEW WATER FEEDER. EXTEND VENT RISER TO THE EXTENT POSSIBLE (6' MINIMUM, 10" PREFERRED) AND PROVIDE MAIN VENT(S) SIZED TO VENT MAIN PIPING AIR VOLUME IN 3 MINUTES AT 2 OZ PRESSURE. PROVIDE 14"H x 26"W (APPROXIMATE, FIELD VERIFY) LOUVER, EQUIVALENT TO RUSKIN MODEL ELF211. COLOR TO BE CHOSEN BY CONTRACTING OFFICER FROM STANDARD KYNAR COLORS. SIZE LOUVER TO OVERLAP EXISTING WINDOW FRAME. SEAL LOUVER FLANGE TO OUTSIDE OF EXISTING FRAME WITH BUTYL GLAZING TAPE, AND CLAMP THROUGH TO ALUMINUM TABS WITH SS SCREWS THROUGH THE LOUVER FLANGE FROM OUTSIDE, ON 8" CENTERS. DO NO PENETRATE EXISTING WINDOW FRAME WITH FASTENERS. PROVIDE 12" x 24" DUCT (WITH CENTER DIVIDER) CONNECTED TO LOUVER. SEAL WATER TIGHT AND PITCH BOTTOM BACK TO LOUVER. PROVIDE 12" W x 12" H MOTOR OPERATED DAMPER (MOD-1) IN OPEN ENDED DUCT. PROVIDE MAKE-ON-RISE THERMOSTAT AT CEILING AND CONNECT TO MOD-1. PROVIDE 12" W x 12" H DUCT, TURNED DOWN TO 12" X 6" DUCT TO WITHIN 6" OF FLOOR. PROVIDE 12" x 6" MOD-2 IN DROP DUCT. INTERLOCK MOD-2 WITH BOILER OPERATION. PROVIDE ALUMINUM BLANK OFF PLATE ADJACENT TO LOUVER TO ACCOMMODATE EXISTING DRYER VENT. MATCH LOUVER FLANGE OUTER DIMENSIONS, AND CONNECT/SEAL TO LOUVER WITH BUTYL TAPE AND ALUMINUM BACKER. PAINT TO MATCH LOUVER.

AutoCAD SHX Text

BROWN MOUNTAIN GATE HOUSE BASEMENT FLOOR HEATING PLAN SCALE: 3/16"=1'-0" ±

AutoCAD SHX Text BROWN MOUNTAIN GATE HOUSE 1ST FLOOR EXISTING HEATING SYSTEM PLAN SCALE: 3/16"=1'-0" ±

AutoCAD SHX Text BROWN MOUNTAIN GATE HOUSE 2ND FLOOR EXISTING HEATING SYSTEM PLAN SCALE: 3/16"=1'-0" ±

AutoCAD SHX Text

ABBREVIATION:

AutoCAD SHX Text

LEGEND:

AutoCAD SHX Text GENERAL NOTES: 1. STEAM SUPPLY PIPING TO BE REPLACED FROM BOILER TO MAIN STEAM MAINS. STEAM SUPPLY PIPING TO BE REPLACED FROM BOILER TO MAIN STEAM MAINS. 2. ALL CONDENSATE RETURN PIPING BELOW WATER LINE (WET RETURN), TO BE REPLACED. ALL CONDENSATE RETURN PIPING BELOW WATER LINE (WET RETURN), TO BE REPLACED. 3. PIPING FROM OIL, WATER, ETC TO BE REPLACED TO NEAREST CONNECTION, ENSURE PIPING CONNECTION POINT HAS NO PIPING FROM OIL, WATER, ETC TO BE REPLACED TO NEAREST CONNECTION, ENSURE PIPING CONNECTION POINT HAS NO CORROSION 4. CONTRACTOR SHALL INSTALL PIPING INSULATION ON ALL ASSOCIATED STEAM PIPING AND HOT WATER PIPING. CONTRACTOR SHALL INSTALL PIPING INSULATION ON ALL ASSOCIATED STEAM PIPING AND HOT WATER PIPING. 5. CONTRACTOR SHALL BE RESPONSIBLE FOR ASSURING THAT ALL BOILER RELATED WORK MEETS CURRENT CODE CONTRACTOR SHALL BE RESPONSIBLE FOR ASSURING THAT ALL BOILER RELATED WORK MEETS CURRENT CODE REQUIREMENTS AS PART OF THIS WORK. 6. CONTRACTOR SHALL BE RESPONSIBLE FOR ASSURING THAT ALL BOILER CONDITIONS, PIPING, VALVES, ETC ARE SAFE CONTRACTOR SHALL BE RESPONSIBLE FOR ASSURING THAT ALL BOILER CONDITIONS, PIPING, VALVES, ETC ARE SAFE AND IN WORKING ORDER. IF BOILER CONDITIONS, PIPING, VALVES, ETC ARE NOT SAFE, OR HAVE CORROSION, OR ARE DAMAGED, CONTRACTOR MUST CONTACT ENGINEER FOR RESOLUTION. 7. CONTRACTOR TO REPLACE ANY AND ALL CONTROLS THAT PERTAIN TO THE BOILER. VERIFY EXACT CONTROL SEQUENCE CONTRACTOR TO REPLACE ANY AND ALL CONTROLS THAT PERTAIN TO THE BOILER. VERIFY EXACT CONTROL SEQUENCE OF EXISTING BOILERS. CONFIRM WITH GOVERNMENT AND CONTRACTING OFFICER AS NEEDED 8. EXISTING CONDITION SHOWN ON PLAN OBTAINED FROM HISTORICAL PLANS PROVIDED BY GOVERNMENT. EXISTING CONDITION SHOWN ON PLAN OBTAINED FROM HISTORICAL PLANS PROVIDED BY GOVERNMENT. 9. PITCH ALL NEW STEAM MAIN PIPING AT 1" IN 20 FEET MINIMUM. CHECK EXISTING MAINS FOR PITCH AND ADJUST TO PITCH ALL NEW STEAM MAIN PIPING AT 1" IN 20 FEET MINIMUM. CHECK EXISTING MAINS FOR PITCH AND ADJUST TO ELIMINATE ANY LOW POINTS. 10. PROVIDE CONCRETE HOUSEKEEPING PAD AT BOILER. PROVIDE CONCRETE HOUSEKEEPING PAD AT BOILER. 11. BOILERS SHALL HAVE SPRINKLER HEADS INSTALLED ABOVE.BOILERS SHALL HAVE SPRINKLER HEADS INSTALLED ABOVE.

AutoCAD SHX Text

STEEL SUPPORT POST

AutoCAD SHX Text

CONCRETE CEILING BEAM

AutoCAD SHX Text

CONCRETE CURB (6"X6")

AutoCAD SHX Text

HATCH LEGEND

AutoCAD SHX Text T

AutoCAD SHX Text

PIPING UP PIPING DOWN CONNECT TO EXISTING THERMOSTAT END-OF-MAIN VENT

AutoCAD SHX Text V

AutoCAD SHX Text

AutoCAD SHX Text 1"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

LPS

AutoCAD SHX Text

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

CAPPED

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text T

AutoCAD SHX Text

59.5 SF EDR

AutoCAD SHX Text

48 SF EDR

AutoCAD SHX Text

42 SF EDR

AutoCAD SHX Text

59.5 SF EDR

AutoCAD SHX Text X"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

1-1/2" UP/DN

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1"

AutoCAD SHX Text

21 SF EDR

AutoCAD SHX Text

1-1/4" UP/DN

AutoCAD SHX Text

60 SF EDR

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text

66 SF EDR

AutoCAD SHX Text

60 SF EDR

AutoCAD SHX Text

54 SF EDR

AutoCAD SHX Text

24.5 SF EDR

AutoCAD SHX Text

BELOW FLOOR

AutoCAD SHX Text

AutoCAD SHX Text 1/2"

AutoCAD SHX Text

WATER FEEDER

AutoCAD SHX Text

TO BOILER

AutoCAD SHX Text 3/8"

AutoCAD SHX Text

(NOT USED)

AutoCAD SHX Text

AutoCAD SHX Text 1'-0'

AutoCAD SHX Text

AutoCAD SHX Text 6'

AutoCAD SHX Text 3'

AutoCAD SHX Text

SCALE: 3/16"=

AutoCAD SHX Text 12/10/2024

AutoCAD SHX Text

EXISTING WELL WATER TANK TO REMAIN

AutoCAD SHX Text

EXISTING WATER HEATER TO BE REMOVED

AutoCAD SHX Text

NOTE: WORK LIMITED TO BASEMENT.

AutoCAD SHX Text

NOTE: WORK LIMITED TO BASEMENT.

DATE:

AutoCAD SHX Text

DESIGNED:

AutoCAD SHX Text

TECH. REVIEW:

AutoCAD SHX Text

SUB SHEET NO.

AutoCAD SHX Text

PMIS/PKG NO.

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

TITLE OF SHEET

AutoCAD SHX Text

STAMP:

AutoCAD SHX Text

A/E FIRM - 140P4324F0048

AutoCAD SHX Text

PRIME/CIVIL:

AutoCAD SHX Text

HEDEFINE ENGINEERING & DESIGN, INC.

AutoCAD SHX Text

ELLSWORTH, MAINE

AutoCAD SHX Text

MEP ENGINEER:

AutoCAD SHX Text

CARPENTER ASSOCIATES

AutoCAD SHX Text

OLD TOWN, MAINE

AutoCAD SHX Text

DETAILS & SCHEDULES

AutoCAD SHX Text

REHABILITATE GATEHOUSE BOILERS

AutoCAD SHX Text

JORDAN POND & BROWN MOUNTAIN

AutoCAD SHX Text

AutoCAD SHX Text 60,027

AutoCAD SHX Text

ACADIA NATIONAL PARK

AutoCAD SHX Text

ACAD339899

AutoCAD SHX Text

EXTERIOR WALL

AutoCAD SHX Text

MOD ACCESS DOOR

AutoCAD SHX Text

MOTOR OPERATED DAMPER (MOD)

AutoCAD SHX Text M

AutoCAD SHX Text

LOUVER

AutoCAD SHX Text

PITCH TO DRAIN, SEAL JOINTS AND SEAMS WATER TIGHT

AutoCAD SHX Text

MOD CONTROLED BY "MAKE ON RISE" THERMOSTAT, SET 85°F.

AutoCAD SHX Text

INTAKE/EXHAUST AIR DETAIL (MECHANICAL ROOM) NO SCALE

AutoCAD SHX Text

CONTROL VIA BOILER CIRCUIT

AutoCAD SHX Text 14"H x 26"W DUCT DUCT OR EQUIVALENT

AutoCAD SHX Text

OED, OF LOUVER AREA12 OF LOUVER AREA

AutoCAD SHX Text

MOTOR OPERATED DAMPER (MOD)

AutoCAD SHX Text M

AutoCAD SHX Text

CONTROL VIA BOILER CIRCUIT

AutoCAD SHX Text

NEAR BOILER PIPING - DUAL SUPPLY: MODELS EC(T)-05-175-200-250

AutoCAD SHX Text

AutoCAD SHX Text 24"

AutoCAD SHX Text

AutoCAD SHX Text 32-1/4"

AutoCAD SHX Text N.W.L.

AutoCAD SHX Text

TOP OF ELBOW

AutoCAD SHX Text

FLOOR LINE

AutoCAD SHX Text

2" TO 4" BELOW NORMAL WATER LEVEL

AutoCAD SHX Text

CONDENSATE

AutoCAD SHX Text

RETURN

AutoCAD SHX Text

STEAM

AutoCAD SHX Text

SUPPLY

AutoCAD SHX Text

BOTTOM

AutoCAD SHX Text

HEADER

AutoCAD SHX Text

NORMAL

AutoCAD SHX Text

WATER LINE

AutoCAD SHX Text MANUFACTURER'S NOTES: 1. (4) NIPPLE - 2"x8" (4) NIPPLE - 2"x8" 2. (2) UNION - 2" (2) UNION - 2" 3. (2) ELBOW - 2" (2) ELBOW - 2" 4. (2) NIPPLE - 2"x14" (2) NIPPLE - 2"x14" 5. (1) REDUCING ELBOW - 2"x2-1/2" (175) (1) REDUCING ELBOW - 2"x2-1/2" (175) (1) REDUCING ELBOW - 3"x2" (200&250) 6. (1) NIPPLE - 2-1/2"x14-1/2" (175) (1) NIPPLE - 2-1/2"x14-1/2" (175) (1) NIPPLE - 3"x14-1/2" (200&250) 7. (2) NIPPLE - 2-1/2"x3-1/2" (175)\ (2) NIPPLE - 2-1/2"x3-1/2" (175)\ (2) NIPPLE - 3"x3-1/2" (200&250) 8. (1) REDUCING TEE - 2-1/2"x2-1/2"x2" (175) (1) REDUCING TEE - 2-1/2"x2-1/2"x2" (175) (1) REDUCING TEE - 3"x3"x2" (200&250) 9. (1) TEE - 2-1/2" (175) (1) TEE - 2-1/2" (175) (1) TEE - 3" (200&250) 10. (1) REDUCING ELBOW - 2-1/2"x1-1/2" (175) (1) REDUCING ELBOW - 2-1/2"x1-1/2" (175) (1) REDUCING ELBOW - 3"x1-1/2" (200&250) 11. (1) NIPPLE - 1-1/2"x12-1/2" (175) (1) NIPPLE - 1-1/2"x12-1/2" (175) (1) NIPPLE - 1-1/2"x12" (200&250) 12. (2) UNION - 1-1/2" (2) UNION - 1-1/2" 13. (1) NIPPLE - 1-1/2"x12-1/2" (1) NIPPLE - 1-1/2"x12-1/2" 14. (3) TEE - 1-1/2" (3) TEE - 1-1/2" 15.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Jul 25, 2025.