B08_-_Attachment_1_-_Specifications_-_Bridge_Decking_Boards.docx

This is a Specifications/Statement of Work document for a bridge decking supply contract with Grand Teton National Park. The National Park Service seeks to purchase bridge decking boards to replace the wearing surface on an existing bridge, requiring a minimum coverage of 1,750 square feet. The boards must meet specific dimensional requirements: minimum 3 inches thick (not exceeding 4 inches), minimum 6 inches wide (not exceeding 10 inches), and minimum 8 feet long (not exceeding 16 feet). The contractor must provide proof that the materials are suitable for bridge surfacing applications, specifically rated for a bridge with an inventory rating of 36 tons and an operational rating of 60 tons. This requirement explicitly excludes standard untreated lumber from commercial retailers and requires demonstrated past performance and use of comparable materials.

Delivery of the timber is required to Grand Teton National Park Headquarters, South District Roads Crew, located at 103 Headquarters Loop Road, Moose, Wyoming 83012. The specifications provide example quantities to illustrate acceptable configurations, such as 329 boards measuring 8 inches wide by 8 feet long, or 165 boards measuring 8 inches wide by 16 feet long, or equivalent board feet calculations. The solicitation (number 140P1426Q0102) is issued by the Department of the Interior National Park Service Intermountain Region.