B08_Attachment_02_Visitor_Center_Entrance_Doors_SOW.pdf

SPECIFICATION FOR REPLACING HORTON MODEL 4100 DOORS

I. SCOPE:

This specification details the tasks and deliverables for the procurement and installation of two

(2) sets of entryway doors, designed to replace the existing Horton Model 4100 doors.

Specifications for Replacement Doors:

1. Type: Replacement doors must be sliding and facilitate easy access.

2. Accessibility: Doors must be compliant with ADA accessibility standards.

3. Mechanics Configuration:

a. The existing mechanical components must be reconfigured.

b. Mechanics should be relocated from being situated in the ground to a position above the doorway or inside the breezeway to protect them from environmental elements.

Installation Requirements:

• The installation process must ensure that after the replacement, the new doors operate fully as intended and designed.

• Any deviations from the specified requirements will be considered unacceptable.

II. PROCURMENT OF PARTS

• Two (2) fully operational sliding entryway doors that meet the aforementioned specifications.

• All necessary adjustments and configurations to ensure compliance with ADA standards and protection from the elements.

III. REMOVAL OF PARTS

• Replace and remove old doors. Remove old operators.

IV. INSTALLATION

• The installation process must ensure that after the replacement, the new doors operate fully as intended and designed.

• Any deviations from the specified requirements will be considered unacceptable.

V. WARRANTY

The offeror shall warrant their supplied parts and all associated labor as to the specified capacities and performance, and to be free from all defects in design, material, and workmanship. All labor and defective parts shall be replaced free of cost. THIS GUARANTEE

SHALL CONTINUE FOR ONE (1) YEAR AFTER COMMENCEMENT OF ACTUAL OPERATION OF THE

EQUIPMENT. No exceptions to the guaranteed requirement will be accepted.