B08_Attachment_02_Revised_Visitor_Center_Entrance_Doors_SOW.pdf
PDF 156 KB Posted
- Attached to
- MIIN - VISITOR CENTER DOORS REPAIR AND SERVICE
- Solicitation number
- 140P8325Q0036
About this file
This document is a Specification for Replacing Horton Model 4100 Doors for the National Park Service at Minidoka National Historic Site. The specification details the procurement and installation of two sliding entryway doors to replace existing Horton Model 4100 doors, with specific requirements for door type, accessibility, and mechanical configuration. Key specifications include sliding doors that facilitate easy access, full compliance with ADA standards, and relocation of mechanical components from ground level to above the doorway or inside the breezeway for environmental protection.
The specification outlines comprehensive installation requirements, including procuring two fully operational sliding doors, removing old operators while reusing existing sprockets and chains, installing new operators, and bringing the doors back to full working condition. The offeror must provide a one-year warranty covering all parts and labor, guaranteeing the equipment's performance and being free from defects in design, material, and workmanship. Any deviations from the specified requirements will be considered unacceptable, and the warranty begins upon the commencement of actual equipment operation.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIFICATION FOR REPLACING HORTON MODEL 4100 DOORS
I. SCOPE:
This specification details the tasks and deliverables for the procurement and installation of two
(2) sets of entryway doors, designed to replace the existing Horton Model 4100 doors.
Specifications for Replacement Doors:
1. Type: Replacement doors must be sliding and facilitate easy access.
2. Accessibility: Doors must be compliant with ADA accessibility standards.
3. Mechanics Configuration:
a. The existing mechanical components must be reconfigured.
b. Mechanics should be relocated from being situated in the ground to a position above the doorway or inside the breezeway to protect them from environmental elements.
Installation Requirements:
• The installation process must ensure that after the replacement, the new doors operate fully as intended and designed.
• Any deviations from the specified requirements will be considered unacceptable.
II. PROCURMENT OF PARTS
• Two (2) fully operational sliding entryway doors that meet the aforementioned specifications.
• All necessary adjustments and configurations to ensure compliance with ADA standards and protection from the elements.
III. REMOVAL OF PARTS
• Remove old operators and, reuse the old sprockets and chains.
IV. INSTALLATION
• Install and set up new operators.
• Doors will be brought back to working condition.
• Service all internal components.
V. WARRANTY
The offeror shall warrant their supplied parts and all associated labor as to the specified capacities and performance, and to be free from all defects in design, material, and workmanship. All labor and defective parts shall be replaced free of cost. THIS GUARANTEE
SHALL CONTINUE FOR ONE (1) YEAR AFTER COMMENCEMENT OF ACTUAL OPERATION OF THE
EQUIPMENT. No exceptions to the guaranteed requirement will be accepted.
File details come from the government source that posted it. Updated .