B08_Attach_7_Existing_Equipment_Manufacturer_Specifications.pdf

Sun. Water. Life.

BERNT LORENTZ GmbH & Co. KG Kroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel. +49 (0) 4193 7548 - 0

Errors excepted and possible alterations without prior notice. Pictures may differ from actual products depending on local market requirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 70) that LORENTZ has.

To fi nd out more visit www.lorentz.de

130531

LC120-12P

High-efficiency PV Module Features

� high energy yields ensured by high conversion efficiency

� sturdy, clear-anodized aluminum frame with pre-drilled holes for quick installation

� advanced EVA encapsulation with triple-layer backsheet, meets the most stringent safety requirements for high-voltage operation

� pre-wired junction box equipped with connec-tors ”plug‘n‘play“

� reliable bypass diodes to prevent overheating (hot spot effect) and to minimise power loss by shading

� manufactured in ISO 9001:2000-certified factory

Specifications

Electrical Data

Peak power Pmax [Wp] 120

Tolerance [%] + 3/– 3

Max. power current Imp [A] 7.0

Max. power voltage Vmp [V] 17.1

Short circuit current Isc [A] 7.7

Open circuit voltage Voc [V] 21.8

Temperature co-efficient for Pmax [%/°C] -0.50

Temperature co-efficient for Voc [%/°C] -0.35

Temperature co-efficient for Isc [%/°C] 0.09

Max. system voltage [V] 1,000

All technical data at standard test condition:

AM = 1.5, E = 1,000W/m², cell temperature: 25 °C

Cells

Number of cells in series 36

Number of cells in parallel 1

Cell technology polycrystalline

Cell shape rectangular

Warranty

� Warranty: 2 years

� Performance guarantee:

up to 10 years (90% power output) up to 20 years (80% power output)

Details according to warranty issued by LORENTZ

Applications

� water pumping

� water purification systems

� remote village lighting

� solar home systems

� street and camp lights

� traffic signals

� medical facilities in remote areas

� microwave/radio repeater stations

� battery charging

� etc.

ph ot o m ay d iff er fr om a ct ua l p ro du ct

Standards

LC120-12P is certified according to IEC 61215 and 61730 by TÜV Rheinland and meets the requirements for CE.

• Quali�ed, IEC 61215

• Safety tested, IEC 61730

• Periodic Inspection

Kroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel. +49 (0) 4193 7548 - 0

Errors excepted and possible alterations without prior notice. Pictures may differ from actual products depending on local market requirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 70) that LORENTZ has.

To fi nd out more visit www.lorentz.de

130531

Electrical Performance

Physical Specifications mm [in]

1, [5

8.

4]

1, [4

7.

4]

[2 7.

7]

[3 5.

4]

8× Ø 6.6 [0.26]

2× Ø 4.2 [0.17]

35 [1.4]669 [26.3] 627 [24.7]

35 [1.4]12 [0.5]

Cell temperature [°C] Irradiance [W/m2] 0 5 10 15 20 25 -25 0 +25 +50 +75 100 0 200 400 600 800 1000 1,200 0 5 10 15 20 25

Cu rre nt [A

Cu rre nt [A

N or m al ise d

Isc , V oc a nd P m ax

N or m al ise d

Isc , V oc a nd P m ax

75°C

Isc

Isc

Voc Voc

Pmax

Pmax

25°C

50°C

80 80

100 100

120 120

140 140

60 60

40 40

20 20

0 00

Electrical Performance for different temperatures, at AM=1.5, E=1,000 W/m2

Electrical Performance for different irradiation, at 25 °C

Temperature Dependence of Isc, Voc and Pmax

Irradiation Dependence of Isc, Voc and Pmax at 25 °C

Voltage [V]

1,000 W/m2

800 W/m2

600 W/m2

400 W/m2

200 W/m2

Voltage [V]

A‘A A‘A

Weight [kg] 13.5

Dimension [mm] 669 × 1,484 × 35

Strength [N/m2] 2,400

Cable approx. 900 mm / 35 in, 4 mm2 / AWG12

Connectors MC4 PV-KBT4/6II-UR / PV-KST4/6II-UR

35 [1.4]

12 [0.5]

[1

.4

A‘A

A‘

A

A‘

A

Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel. +49 (0) 4193 8806 – 700

All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may diff er from actual products depending on local market re-quirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/ pump ends are shown to represent the wide range of pumps (over 70) that LORENTZ has.

To fi nd out more visit www.lorentz.de

Submersible Pump Systems for 4” and 6” Wells PS2 Centrifugal Solar Pump Systems pump system PS2-150 C PS2-600 C PS2-1800 C PS2-4000 C max. total dynamic head (TDH) [m] 20 30 100 160 max. flow rate [m3/h] 4.0 12 53 79 solar operation:

max. power voltage (Vmp)* [V DC] > 17 > 68 > 102 > 238 open circuit voltage (Voc) [V DC] max. 50 max. 150 max. 200 max. 375 nominal voltage [V DC] 12 – 24 48 – 72 72 – 96 168 – 192 battery operation:

nominal voltage [V DC] 12 & 24 48 96 n.a.

*PV modules at standard test condition: AM = 1.5, E = 1,000 W/m², cell temperature: 25 °C

LORENTZ PS2 centrifugal pumps are high quality products designed for higher flow drinking water supply, livestock watering, pond management and irrigation applications.

PS2 centrifugal pumps provide large volumes of water economically, without pollution, anywhere.

Benefits

� Long life expectancy and proven in service record � Designed for use in remote and harsh conditions � Smart modular design for simple and cost effective servicing and repair � Highest efficiency, pumps more water than the competition, starts earlier in the day and finishes later

� Fast and simple installation � Cost effective spare parts philosophy � Large range of pumps to closely match each application and optimise efficiency � Simple configuration, diagnostics and performance data via free LORENTZ PumpScanner Android™ App

Features

� Engineered in Germany � High quality non corrodible materials used throughout � Solar direct connect with AC connection options � MPPT technology to maximise power use from PV modules � ECDRIVE DC brushless motors, designed for solar, with over 90% efficiency � Inbuilt data logger with wireless access � Multi LED display for simple operation � Multiple analog and digital inputs and outputs for ultimate connectivity

The LORENTZ PS2 range of DC powered centri-fugal pumps have been designed specifically to pump larger volumes of water efficiently using solar power. These highly efficient pumps can achieve flow rates of 79 m3/hour.

Each system consists of a pump, pump motor and a controller. This modular concept keeps all electronics above ground providing simple servicing, ease of access and a low cost of ownership. PS2 has extensive connectivity options for sensors and switches, in built software applications and data logging to meet all of your pumping needs.

v1

Tuttle and HortonCrowley chparker Highlight chparker Highlight chparker Highlight chparker Highlight chparker Highlight chparker Highlight chparker Highlight

Head max. 80 m Flow rate max. 13 m³/h

Controller PS2-4000

▪ Controlling and monitoring

▪ Control inputs for dry running protection, remote control etc.

▪ Protected against reverse polarity, overload and overtemperature

▪ Integrated MPPT (Maximum Power Point Tracking)

▪ Integrated Sun Sensor

Power max. 4,0 kW Input voltage max. 375 V Optimum Vmp** > 238 V Motor current max. 14 A Efficiency max. 98 % Ambient temp. -40...50 °C Enclosure class IP68

Motor ECDRIVE 4000-C

▪ Maintenance-free brushless DC motor

▪ Water filled

▪ Premium materials, stainless steel: AISI 304/316

▪ No electronics in the motor Rated power 4,0 kW Efficiency max. 92 % Motor speed 900...3 300 rpm Insulation class F Enclosure class IP68 Submersion max. 150 m

Pump End PE C-SJ8-15

▪ Non-return valve

▪ Premium materials, stainless steel: AISI 304

▪ Optional: dry running protection

▪ Centrifugal pump

Standards

2006/42/EC, 2004/108/EC, 2006/95/EC

IEC/EN 61702:1995

The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements.

Pump Unit PU4000 C-SJ8-15 (Motor, Pump End) Borehole diameter min. 4,0 in Water temperature max. 50 °C

Technical Data

System Overview

**Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de

Created by LORENTZ COMPASS 3.1.0.95 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

Solar Submersible Pump System for 4" wells

PS2-4000 C-SJ8-15 Tuttle and Horton Pump and Control

H1 = H2 = W1 = W2 = W3 = D1 =

352 mm 333 mm 207 mm 170 mm 164 mm 124 mm

Controller

A = B = C = D = E = S =

1 118 mm 245 mm 873 mm 96 mm 98 mm 2 in

Pump Unit

Net weight

Controller 6,1 kg

Pump Unit 21 kg

Motor 10 kg

Pump End 11 kg

*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar irradiance, 25 °C cell temperature

Dimensions and Weights

Pump Chart Vmp* > 238 V

BERNT LORENTZ GmbH & Co. KG Siebenstuecken 24, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 8806-700, www.lorentz.de

Created by LORENTZ COMPASS 3.1.0.95 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.

Solar Submersible Pump System for 4" wells

PS2-4000 C-SJ8-15

The Solar Water Pumping Company

— 16

Technical Data

Controller Technical Data

Model PS2-150 PS2-200 PS2-600 PS2-1800 PS2-4000

Power (max) 300 W 300 W 700 W 1,800 W 4,000 W

Input voltage (max) DC Voc

50 V 100 V 150 V 200 V 375 V

Input current (max) 22 A 11 A 13 A 14 A 14 A

Output voltage PWM 3 phase

4 – 36 V 10 – 60 V 10 – 60 V 30 – 130 V 60 – 240 V

Efficiency Max 98%

Ambient temperature -38 ... 50 °C (-36...122F )

Enclosure IP 68 (NEMA 6P) outdoor housing

Pressure cast aluminum and powder coated cover Pressure cast aluminum case with integrated heat sink

ECDRIVE (motor) Technical Data

Model ECDRIVE 150 ECDRIVE 200 ECDRIVE 600 ECDRIVE 1800 ECDRIVE 4000

Power (max) 300 W 300 W 700 W 1,800 W 4,000 W

Input voltage 18 V 45 V 45 V 95 V 240 V

Physical Insulation class F, Max submersion 150 m, Enclosure class IP68, EN 1.4301/ AISI 304 stainless steel

Crowley CG Tuttle CG and Horton CG chparker Highlight chparker Highlight chparker Highlight chparker Highlight chparker Highlight chparker Highlight chparker Highlight chparker Highlight chparker Highlight chparker Highlight

17 — 200124

Pump Technical Data

Submersible pumps

Motor technology 4“ high efficiency ECDRIVE brushless DC motor

Speed 600 to 3,300 rpm – depending on pump end

Pump ends Helical Rotor

EN 1.4301/ AISI 304 cast Stainless steel stator housing Solid stainless steel rotor

Pump ends Centrifugal

Multi-stage centrifugal – premium materials, EN 1.4301/ AISI 304 stainless steel

Surface pumps

Motor technology 4“ high efficiency air cooled ECDRIVE brushless DC motor

Speed 600 to 3,300 rpm – depending on pump end

Pump ends Vertical multi-stage centrifugal premium materials, EN 1.4301/

AISI 304 stainless steel

Single stage centrifugal premium materials, cast iron body

Pool pumps

Motor technology 4“ high efficiency air cooled ECDRIVE brushless DC motor

Speed 900 to 3,300 rpm – depending on pump end

Pump ends Single stage centrifugal premium materials

The Solar Water Pumping Company

— 18

Partner Network COMPASS

Choosing and designing your system

PS2 is available from approved LORENTZ partners ac-ross 130 countries. Our sales and service partners have the local knowledge, access to the right tools and infor-mation to plan a system accurately. This high degree of certainty and real world experience removes risk from your project.

Our industry leading COMPASS system planning soft-ware gives a detailed simulation of the water delivery through the year for your exact site location. This detailed modeling application provides a high degree of confidence that your system will perform as you require it to.

To find a partner near you, visit www.lorentz.de/partners

19 — 200124

PS2-150 PS2-200 PS2-600 PS2-1800 PS2-4000

Performance flow [m³/hour] flow [US Gal./hour] lif t [ m lif t [ ft

The table below provides an indicative view of the system type that would be required to meet a specific hourly flow, and a given pumping head. Higher flow water appli-cations are also possible, please speak to a LORENTZ partner about your specific project needs.

0.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 52 54 56 58 60

450 1,475

400 1,310

350 1,150

300 985

290 950

280 920

270 885

260 855

250 820

240 785

230 755

220 720

210 690

200 655

190 625

180 590

170 560

160 525

150 490

140 460

130 425

120 395

110 360

100 330

90 295

80 260

70 230

60 195

50 165

40 130

30 100

20 65

10 35

.0

.3

.6

.8

.1

.4

.9

.7

.2

.5

0.

0.

0.

0.

1.

1.

1.

1.

2.

2.

2.

2.

3.

3.

4.

4.

5.

5.

LORENTZ is the global market leader in solar powered water pumping solutions. Founded in Germany during 1993 LORENTZ has pioneered, innovated and excelled in the engineering and manufacturing of solar powered water pumping. Today LORENTZ is active in over 130 countries through a dedicated network of professional partners.

LORENTZ technology uses the power of the sun to pump water, sustaining and enhancing the life of millions of peo-ple, their livestock and crops.

Simply – Sun. Water. Life.

About LORENTZ

LORENTZ Germany Siebenstücken 24 24558 Henstedt-Ulzburg Germany

+49 (4193) 8806 700

LORENTZ US Corp

710 S HWY 84

Slaton, TX 79364

USA

+1 (844) LORENTZ

www.lorentz.de

LORENTZ India Pvt. Ltd.

Netaji Subhash Place Pitampura 110034 New Delhi India

+ 91 (11) 4707 1009

LORENTZ China No 34 Jiuan Road Doudian Town Fangshan District 102433 Beijing China

+ 86 (10) 6345 5327

Tuttle Tank and Horton Tank

American BH Tank Works

Crowley Tank

American BH Tank Works

Attachment 8: Existing Equipment Manufacture Specifications