B08_-_140FS126Q0195_Solicitation_Package.pdf

PDF 405 KB Posted

Attached to
WA-FWS RIDGEFIELD NWR-HVAC MAINTENANCE
Solicitation number
140FS126Q0195
Issued by

About this file

This is a Request for Offers (RFO) for HVAC maintenance services at Ridgefield National Wildlife Refuge in Washington state. The solicitation number is 140FS126Q0195, issued by the Fish and Wildlife Service (FWS) on September 1, 2026, with offers due September 11, 2026 at 1300 Central Time. This is a Total Small Business Set-Aside with a firm-fixed-price contract type for commercial services under FAR Part 12. The applicable NAICS code is 238220 (Plumbing, Heating, and Air-Conditioning Contractors) with a $19 million size standard, and the PSC is J045 (Maintenance, Repair, and Rebuilding of Plumbing, Heating, and Waste Disposal Equipment).

The requirement covers HVAC maintenance for the Headquarters and Community Nature Center buildings at 28908 NW Main Avenue, Ridgefield, WA 98642. The base period runs October 1, 2026 through September 30, 2027, with four one-year option periods through September 30, 2031. Offerors must provide pricing for five line items (CLINs 00010-00050) covering the base year and four option years. The Headquarters building contains three Fan Coil Units, one VRF Heat Pump, one Ductless Split Heat Pump System, one Energy Recovery Ventilator, and six Electric Heaters. The Community Nature Center contains nine Fan Coil Units, one VRF Heat Pump, one Ductless Split Heat Pump System, and three Energy Recovery Ventilators. Services include two maintenance visits per year during the base period and Option Year 1, increasing to four visits per year for Options Years 2-4. Tasks include coil cleaning, motor and compressor inspections, thermostat checks, electrical inspections, belt replacement once annually, and filter replacement at each visit. The contractor must submit an annual schedule within five business days of award and provide post-visit reports documenting tasks performed, issues identified, parts replaced, photos, and recommendations with urgency levels. All personnel must be bonded, and the contractor shall provide all equipment, tools, materials, and supplies necessary for performance. Technical evaluation is based on pass/fail criteria including a completed bid schedule, demonstrated capability to perform the Statement of Work, and proof of required licenses and certifications. Price will be evaluated for fairness and reasonableness with best overall value as the award criterion. A site visit is available September 8, 2026, and RFIs are due September 4, 2026. Inquiries and offers should be submitted via email to Tanner Frank at Tanner_Frank@ios.doi.gov. Service Contract Act wage determinations apply, with prevailing wage rates established for the region covering Oregon and Washington counties, including Health & Welfare benefits of $5.92 per hour, paid vacation, and holidays.

View the file

Other files

File Type Posted
A04_-_Statment_of_Work.pdf PDF
Sol_140FS126Q0195.pdf PDF
B06_-_Bid_Schedule___Offer_Eval_Info.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

WOMEN-OWNED SMALL

BUSINESS (WOSB)

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NUMBER 3.AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/

OFFEROR

CODE

FACILITY

CODE

CODE

TELEPHONE NUMBER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

REQUEST

FOR QUOTE

(RFQ)

INVITATION

FOR BID

(IFB)

REQUEST

FOR

PROPOSAL

(RFP)

SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Government Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 29. AWARD OF CONTRACT: REFERENCE

. YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

10. THIS ACQUISITION IS UNRESTRICTED OR

NORTH AMERICAN

INDUSTRY CLASSIFICATION

STANDARD (NAICS):

SIZE STANDARD:

13a. THIS CONTRACT IS A

RATED ORDER UNDER

THE DEFENSE PRIORITIES

AND ALLOCATIONS

SYSTEM - DPAS (15 CFR 700)

SET ASIDE: % FOR:

11. DELIVERY FOR FREE ON

BOARD (FOB) DESTINATION

UNLESS BLOCK IS MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4.

FAR 52.212-3 AND 52.212-5 ARE ATTACHED.

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED.

8(A)

ECONOMICALLY

DISADVANTAGED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

(SDVOSB)

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

NOTE: OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30.

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH

AND DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND

ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS

SPECIFIED

DATED.

OFFER

ADDENDA

ADDENDA

140FS126Q0195

See Schedule See Schedule

FWS SAT 1

FWS, SAT Team 1 5275 Leesburg Pike Falls Church VA 22041

09/11/2026 1300 CD

0044054342

Tanner Frank 0000000000

FS1 100.00

FS1

Tanner Frank

238220

$19

09/01/2026

0011279471

ADMINISTERED BY:

FWS SAT 1

FWS, SAT Team 1

5275 Leesburg Pike

Falls Church VA 22041 US

DELIVER TO:

Continued...

STOCK RECORD (S/R)

STANDARD FORM 1449 (REV. 11/2021) BACK

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE RECEIVED (MM/DD/YYYY) 42d. TOTAL CONTAINERS

40. PAID BY

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32g. EMAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

PARTIAL FINAL

37. CHECK NUMBER

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER

36. PAYMENT

COMPLETE PARTIAL FINAL

ACCEPTED,

FWS RIDGEFIELD NWR

P.O. BOX 457

RIDGEFIELD WA 98642-0457 US

Ridgefield NWR HVAC Maintenance

Please read the entire Request for Offers (RFO) and all attachments prior to submitting an offer.

This is a Firm-Fixed-Price contract and a Total

Small Business Set-Aside. All responsible small business sources may submit an offer, which will be considered by the Government. Award will be made to the responsible offeror whose offer represents the best overall value to the

Government in accordance with the evaluation information included with this solicitation.

This solicitation is for commercial services prepared in accordance with FAR Part 12.

Solicitation number 140FS126Q0195 is for HVAC maintenance at Ridgefield National Wildlife

Refuge, Washington. The applicable NAICS code is 238220, Plumbing, Heating, and

Air-Conditioning Contractors, with a size standard of $19 million. The PSC is J045, Maintenance, Repair, and Rebuilding of

Plumbing, Heating, and Waste Disposal

Equipment.

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGES

NAME OF OFFEROR OR CONTRACTOR

SUPPLIES/SERVICES

(B)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

OPTIONAL FORM 336 (4-86)

Sponsored by GSA FAR (48 CFR) 53.110

ITEM NO.

(A)

QUANTITY

(C)

NSN 7540-01-152-8067

The requirement is for HVAC maintenance of the

Headquarters and Community Nature Center at

28908 NW Main Avenue, Ridgefield, WA 98642, in accordance with the Statement of Work. The contractor shall furnish all personnel, equipment, tools, materials, supplies, transportation, and other resources necessary to complete the work.

Period of Performance: October 1, 2026 through

September 30, 2027, with four one-year option periods through September 30, 2031.

A site visit will be available on September 8, 2026. Attendance is optional but highly encouraged and must be coordinated in advance with Carissa Callison at 541-238-4536 or carissa_callison@fws.gov. The site visit will provide an opportunity to ask technical questions and verify information necessary to submit a firm-fixed-price offer.

RFIs Due: September 4, 2026 at 1300 Central

Time. Submit questions by email to

Tanner_Frank@ios.doi.gov.

Submit offers by email to

Tanner_Frank@ios.doi.gov. The email subject line must contain "RFO 140FS126Q0195".

Telephone offers will not be accepted.

Offers Due: September 11, 2026 at 1300 Central

Time.

Tech: Eric Henson phone (360) 609-0326 email eric_henson@fws.gov

Alt: Rebecca Gomez Chuck phone (541) 238-4536 email rebecca_chuck@fws.gov

Contracting Officer: Tanner Frank email tanner_frank@ios.doi.gov

Delivery: 09/30/2027

Period of Performance: 10/01/2026 to

09/30/2031

00010 CNC/HQ BASE HVAC Maintenance

Period of Performance: 10/01/2026 to

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGES

NAME OF OFFEROR OR CONTRACTOR

SUPPLIES/SERVICES

(B)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

OPTIONAL FORM 336 (4-86)

Sponsored by GSA FAR (48 CFR) 53.110

ITEM NO.

(A)

QUANTITY

(C)

NSN 7540-01-152-8067

09/30/2027

00020 CNC/HQ HVAC Maintenance - OY1

(Option Line Item)

Anticipated Exercise Date 06/01/2027

Period of Performance: 10/01/2027 to

09/30/2028

00030 CNC/HQ HVAC Maintenance - OY2

(Option Line Item)

Anticipated Exercise Date 06/01/2028

Period of Performance: 10/01/2028 to

09/30/2029

00040 CNC/HQ HVAC Maintenance - OY3

(Option Line Item)

Anticipated Exercise Date 06/01/2029

Period of Performance: 10/01/2029 to

09/30/2030

00050 CNC/HQ HVAC Maintenance - OY4

(Option Line Item)

Anticipated Exercise Date 06/01/2030

Period of Performance: 10/01/2030 to

09/30/2031

OFFER EVALUATION INFORMATION

HVAC Maintenance - Ridgefield National Wildlife Refuge

RFO: 140FS126Q0195

RFIs Due: September 4, 2026 at 1300 Central Time Offers Due: September 11, 2026 at 1300 Central Time Submission: Email to Tanner_Frank@ios.doi.gov Format: Email the required documents as individual PDF files: Bid Schedule, SF 1449, and Technical Submission.

Submission: Email subject line must contain "RFO 140FS126Q0195".

Period of Performance: October 1, 2026 through September 30, 2027, with four one-year option periods.

Site Visit: A site visit will be available on 8 September, attendance is highly encouraged and must be coordinated in advance with Carissa Callison, phone : 541-238-4536 or email: carissa_callison@fws.gov.

The site visit will be the opportunity for vendors to ask any technical questions and verify information necessary to submit a firm-fixed-price offer. Vendors are responsible for confirming information necessary to accurately price the requirement. Completion of a site visit may be considered as part of the Government's comparative evaluation.

REQUIRED SUBMISSION DOCUMENTS

• Bid Schedule: Completed vendor information section and pricing for CLINs 1-5.

• Technical Submission: Brief information demonstrating the offeror's capability and approach to perform the

Statement of Work. Include the Quality Control Plan and proof of any required licenses, certifications, or registrations.

TECHNICAL EVALUATION: BEST OVERALL VALUE

1. BEST OVERALL VALUE

The Government will comparatively evaluate technically acceptable offers and issue a purchase order to the responsible offeror whose offer represents the best overall value to the Government. The Government may consider price and the non-price information submitted. A higher-priced offer may be selected when its advantages warrant the additional cost. Price will be evaluated for fairness and reasonableness.

2. Technical Acceptability, Pass/Fail Technical acceptability will be evaluated on a Pass/Fail basis. To receive a Pass rating, the offer must:

• Provide a completed Bid Schedule with pricing for CLINs 00010, 00020, 00030, 00040, and 00050.

• Demonstrate the capability to perform the Statement of Work.

• Provide proof of required licenses, certifications, or registrations applicable to the work.

Failure to provide the required information or meet all Pass/Fail criteria may result in a Fail rating and removal from further consideration.

mailto:carissa_callison@fws.gov

BID SCHEDULE

RIDGEFIELD NATIONAL WILDLIFE REFUGE

HVAC Maintenance

CLIN Description Qty Unit Price

00010 HVAC maintenance IAW SOW - Base Period 1 Year $____________

00020 HVAC maintenance IAW SOW - Option Year 1 1 Year $____________

00030 HVAC maintenance IAW SOW - Option Year 2 1 Year $____________

00040 HVAC maintenance IAW SOW - Option Year 3 1 Year $____________

00050 HVAC maintenance IAW SOW - Option Year 4 1 Year $____________

Total Evaluated Price (Base and All Four Options): $____________________________

Period of Performance: Base Period October 1, 2026 through September 30, 2027, plus four one-year option periods through September 30, 2031.

Notes:

The annual price shall include all labor, supervision, travel, transportation, tools, equipment, filters, materials, coordination, reporting, overhead, profit, and all other costs necessary to perform the Statement of Work. Total Evaluated Price is the sum of the base period and all four option periods.

For both the Headquarters and Community Nature Center, price two maintenance visits per year during the base period and Option Year 1, and four visits per year during Option Years 2, 3, and 4. Tasks specified in the SOW as annual remain once per year.

Vendor Information:

Company Name: ______________________________________________

SAM.gov UEI: _______________________________________________

Valid Email Address: ___________________________________________

Confirmation of Active SAM Registration (no exclusions): Yes [ ] No [ ]

Registered under the NAICS listed in the solicitation: Yes [ ] No [ ]

Required Licenses/Certifications/Registrations Attached: Yes [ ] No [ ]

Site Visit Completed: Yes [ ] No [ ]

STATEMENT OF WORK

Ridgefield National Wildlife Refuge

Headquarters and Community Nature Center HVAC Maintenance

1. Background: This is a contract to provide HVAC Maintenance for the Headquarters (HQ) and Community Nature Center (CNC) buildings at the Ridgefield National Wildlife Refuge (RNWR).

The headquarters (HQ) building is utilized nearly daily by refuge staff and volunteers.

2. Location Information: The work to be performed under this contract will be at the RNWR Headquarters site, located at 28908 NW Main Avenue Ridgefield, WA 98642.

3. Period of Performance: These services are being sought for one year, 10/01/2026 – 09/30/2027, with four option years following to be exercised at the Government’s discretion.

Normal hours during which work may be completed are Monday through Friday, 8am to 4pm but work must be scheduled in advance with the Refuge Point of Contact. In the event of emergencies, Contractor shall provide contact information.

Contractor is not required to perform services on Federal holidays (New Year’s Day, Labor Day, Martin Luther King Jr.’s Birthday, Columbus Day, President’s Day, Veteran’s Day, Memorial Day, Thanksgiving Day, Juneteenth, Christmas Day, Independence Day).

4. Scope: The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and any other items necessary to complete all services described herein. The contractor shall also complete all coordination and scheduling to assure completion of all services herein. Contractor and employees shall be bonded and a copy of the certificate filed with RNWR Office, listing all employees; only bonded employees are to work on Fish and Wildlife Service premises.

The work shall be performed in accordance with the Deliverables as described below. The contractor shall determine how much labor is needed to perform tasks, what methods will be used to complete the job and which supplies, material, and equipment are needed. All filters and parts utilized for completion of this work must meet manufacturer recommendations for the HVAC system.

5. Deliverables and Schedule:

Headquarters Building

- Building consists of Fan Coil Units (3), VRF Heat Pump (1), Ductless Split Heat Pump

System (1), Energy Recovery Ventilator (1), and Electric Heaters (6).

- Unless specified otherwise below, listed items shall be completed biannually each year

(2x/year) for years 1 and 2, then quarterly (4x/year) for following years.

o Clean condensing coils and evaporator coils once a year.

o Check and inspect operation of motors, blower, and condensing fans.

o Check and inspect airflow.

o Check and inspect operation of thermostats and controls.

o Check and inspect operation of compressors.

o Check and inspect electrical wiring.

o Check and inspect heat exchanger and ignitor systems if applicable.

o Check and inspect and clean condensate piping.

o Replace belts once a year where applicable.

o Install new pleated air filters and clean and wash the washable filters every visit.

Community Nature Center

- Building HVAC consists of Fan Coil Units (9), VRF Heat Pump (1), Ductless Split Heat Pump System (1), Energy Recovery Ventilators (3). .

- Unless specified otherwise below, listed items shall be completed biannually each year (2x/year) for years 1 and 2, then quarterly (4x/year) for following years.

o Clean condensing coils and evaporator coils once a year.

o Check and inspect operation of motors, blower, and condensing fans.

o Check and inspect airflow.

o Check and inspect operation of thermostats and controls.

o Check and inspect operation of compressors.

o Check and inspect electrical wiring.

o Check and inspect heat exchanger and ignitor systems if applicable.

o Check and inspect and clean condensate piping.

o Replace belts once a year where applicable.

o Install new pleated air filters and clean and wash the washable filters every visit.

- Documentation:

o Annual schedule for completion of contracted work submitted within five business days of the base award and period of performance start date of option years.

o Report following each visit that identifies a checklist of tasks performed, issues found, parts replaced, photos of any issues encountered and recommendations with urgency level.

6. Site Security: As needed, the Government will provide any keys required for completion of contracted work. The Contractor shall not duplicate any keys. The Contractor shall establish and implement methods of ensuring that these keys are not lost or misplaced and are not used by unauthorized persons. Keys shall be returned to the Refuge Point of Contact at the end of each service visit.

7. Safety: The Contractor shall put in place safety measures to reduce the risk of injuries during the performance of work. Should any accident or injuries arise either to a person or property, contractor shall notify the primary refuge point of contact immediately and cooperate fully in any investigation as necessary.

8. Government-Furnished Equipment (GFE) / Government-Furnished Information (GFI): The Government will provide any necessary site access codes, keys, or remotes for the duration of the contract.

9. Quality Control: The Contractor shall develop and maintain an effective quality control program to ensure services are performed in accordance with this SOW. The Contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The Contractor’s quality control program is the means by which they assure themselves that their work complies with the requirement of the contract.

10. Post Award Orientation/Periodic Check-in Meetings: The Contractor agrees to attend any post award orientation meetings and Periodic check-in meetings as required by the Government to review the Contractor’s performance. At these meetings the Government personnel will apprise the contractor of how the government views the contractor's performance and the contractor will apprise the Government of problems, if any, being experienced. Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the government.

11. Identification of Contractor Employees: All contract personnel performing services, attending meetings, and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression for the public that they are Government personnel.

SOLICITATION PROVISIONS

52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

https://www.acquisition.gov/far https://www.acquisition.gov/far-overhaul (End of provision)

52.252-5 Authorized Deviations in Provisions (NOV 2020)

(a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the provision.

(b) The use in this solicitation of any Department of the Interior Acquisition Regulation (48 CFR Chapter 14) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of provision)

Number Title Date / version

52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation

JAN 2017

52.204-7 System for Award Management—Registration NOV 2024

(DEVIATION)

52.212-1 Instructions to Offerors—Commercial Products and Commercial Services SEP 2023

(DEVIATION)

52.217-5 Evaluation of Options JUL 1990

52.240-90 Security Prohibitions and Exclusions Representations and Certifications MAR 2026

(DEVIATION)

Provisions and clauses marked (DEVIATION) incorporate the RFO text adopted by the applicable DOI class deviation identified on page 3.

CONTRACT CLAUSES

52.252-2 Clauses Incorporated by Reference (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/far https://www.acquisition.gov/far-overhaul (End of clause)

52.252-6 Authorized Deviations in Clauses (NOV 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any Department of the Interior Acquisition Regulation (48 CFR Chapter 14) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

Number Title Date / version

52.203-17 Contractor Employee Whistleblower Rights NOV 2023

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements

JAN 2017

52.204-13 System for Award Management—Maintenance OCT 2018

(DEVIATION)

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded

JAN 2025

(DEVIATION)

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations NOV 2015

(DEVIATION)

52.212-4 Terms and Conditions—Commercial Products and Commercial Services NOV 2023

(DEVIATION)

52.219-6 Notice of Total Small Business Set-Aside NOV 2020

(DEVIATION)

52.222-3 Convict Labor JUN 2003

Number Title Date / version

52.222-36 Equal Opportunity for Workers with Disabilities JUN 2020

(DEVIATION)

52.222-41 Service Contract Labor Standards AUG 2018

(DEVIATION)

52.222-43 Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts)

AUG 2018

(DEVIATION)

52.222-50 Combating Trafficking in Persons OCT 2025

(DEVIATION)

52.222-62 Paid Sick Leave Under Executive Order 13706 JAN 2022

(DEVIATION)

52.222-90 Addressing DEI Discrimination by Federal Contractors MAY 2026

(DEVIATION)

52.223-12 Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners

MAY 2024

(DEVIATION)

52.223-23 Sustainable Products MAY 2024

(DEVIATION)

52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving MAY 2024

52.232-33 Payment by Electronic Funds Transfer-System for Award Management OCT 2018

52.232-40 Providing Accelerated Payments to Small Business Subcontractors MAR 2023

52.233-3 Protest after Award AUG 1996

52.233-4 Applicable Law for Breach of Contract Claim OCT 2004

52.240-91 Security Prohibitions and Exclusions MAR 2026

(DEVIATION)

52.240-93 Basic Safeguarding of Covered Contractor Information Systems MAR 2026

(DEVIATION)

52.244-6 Subcontracts for Commercial Products and Commercial Services OCT 2025

DOI RFO authorities: DOI-AAAP-F004 (March 2026); F009 (May 2026); F012 (March 2026); F019 (January 2026); F022 (May 2026);

F023 (May 2026); F040 (March 2026); and F044 (May 2026). The original FAR clause date is retained for existing clause numbers; new clause numbers identify the DOI deviation month.

RFO clause text: https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52 DOI deviation memoranda: https://www.acquisition.gov/far-overhaul

CLAUSES IN FULL TEXT

52.217-9 Option to Extend the Term of the Contract (MAR 2000)

(a) The Government may extend the term of this contract by written notice to the Contractor within 1 day; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 30 days before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 5 years (End of clause)

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5563 Daniel W. Simms Division of | Revision No.: 30 Director Wage Determinations| Date Of Last Revision: 8/27/2026

State: Oregon, Washington

Area: Oregon Counties of Clackamas, Columbia, Multnomah, Washington and Yamhill

Washington Counties of Clark and Skamania

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 21.84 01012 - Accounting Clerk II 24.51 01013 - Accounting Clerk III 27.42 01020 - Administrative Assistant 37.86 01035 - Court Reporter 23.87 01041 - Customer Service Representative I 19.10 01042 - Customer Service Representative II 20.85 01043 - Customer Service Representative III 23.39 01051 - Data Entry Operator I 20.32 01052 - Data Entry Operator II 22.18 01060 - Dispatcher, Motor Vehicle 27.52 01070 - Document Preparation Clerk 20.04 01090 - Duplicating Machine Operator 20.04 01111 - General Clerk I 19.89 01112 - General Clerk II 21.70 01113 - General Clerk III 24.35 01120 - Housing Referral Assistant 26.62 01141 - Messenger Courier 21.95 01191 - Order Clerk I 23.15 01192 - Order Clerk II 25.26 01261 - Personnel Assistant (Employment) I 21.27 01262 - Personnel Assistant (Employment) II 23.80 01263 - Personnel Assistant (Employment) III 26.54 01270 - Production Control Clerk 29.55 01290 - Rental Clerk 22.00 01300 - Scheduler, Maintenance 21.34 01311 - Secretary I 21.34 01312 - Secretary II 23.87 01313 - Secretary III 26.62 01320 - Service Order Dispatcher 24.61 01410 - Supply Technician 37.86 01420 - Survey Worker 25.42 01460 - Switchboard Operator/Receptionist 20.98 01531 - Travel Clerk I 21.77 01532 - Travel Clerk II 24.44 01533 - Travel Clerk III 27.34 01611 - Word Processor I 19.08 01612 - Word Processor II 21.42 01613 - Word Processor III 23.97

05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 28.48 05010 - Automotive Electrician 27.50 05040 - Automotive Glass Installer 25.88 05070 - Automotive Worker 25.88 05110 - Mobile Equipment Servicer 22.79 05130 - Motor Equipment Metal Mechanic 29.06 05160 - Motor Equipment Metal Worker 25.88 05190 - Motor Vehicle Mechanic 29.06 05220 - Motor Vehicle Mechanic Helper 21.21 05250 - Motor Vehicle Upholstery Worker 24.37 05280 - Motor Vehicle Wrecker 25.88 05310 - Painter, Automotive 27.50 05340 - Radiator Repair Specialist 25.88 05370 - Tire Repairer 23.50 05400 - Transmission Repair Specialist 29.06

07000 - Food Preparation And Service Occupations 07010 - Baker 20.25 07041 - Cook I 22.02 07042 - Cook II 25.01 07070 - Dishwasher 17.91 07130 - Food Service Worker 18.62 07210 - Meat Cutter 24.99

07260 - Waiter/Waitress 18.95

09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 25.31 09040 - Furniture Handler 13.19 09080 - Furniture Refinisher 20.19 09090 - Furniture Refinisher Helper 15.57 09110 - Furniture Repairer, Minor 17.88 09130 - Upholsterer 23.00

11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 18.86 11060 - Elevator Operator 19.79 11090 - Gardener 28.32 11122 - Housekeeping Aide 19.79 11150 - Janitor 19.79 11210 - Laborer, Grounds Maintenance 22.33 11240 - Maid or Houseman 18.75 11260 - Pruner 20.39 11270 - Tractor Operator 26.36 11330 - Trail Maintenance Worker 22.33 11360 - Window Cleaner 21.67

12000 - Health Occupations 12010 - Ambulance Driver 25.01 12011 - Breath Alcohol Technician 36.00 12012 - Certified Occupational Therapist Assistant 37.81 12015 - Certified Physical Therapist Assistant 35.91 12020 - Dental Assistant 28.79 12025 - Dental Hygienist 59.18 12030 - EKG Technician 46.03 12035 - Electroneurodiagnostic Technologist 46.03 12040 - Emergency Medical Technician 25.01 12071 - Licensed Practical Nurse I 32.18 12072 - Licensed Practical Nurse II 36.00 12073 - Licensed Practical Nurse III 40.15 12100 - Medical Assistant 27.04 12130 - Medical Laboratory Technician 39.91 12160 - Medical Record Clerk 26.60 12190 - Medical Record Technician 29.76 12195 - Medical Transcriptionist 21.98 12210 - Nuclear Medicine Technologist 60.97 12221 - Nursing Assistant I 17.58 12222 - Nursing Assistant II 19.77 12223 - Nursing Assistant III 21.58 12224 - Nursing Assistant IV 24.21 12235 - Optical Dispenser 28.09 12236 - Optical Technician 22.28 12250 - Pharmacy Technician 28.17 12280 - Phlebotomist 24.85 12305 - Radiologic Technologist 50.39 12311 - Registered Nurse I 35.31 12312 - Registered Nurse II 43.19 12313 - Registered Nurse II, Specialist 43.19 12314 - Registered Nurse III 52.27 12315 - Registered Nurse III, Anesthetist 52.27 12316 - Registered Nurse IV 62.65 12317 - Scheduler (Drug and Alcohol Testing) 44.60 12320 - Substance Abuse Treatment Counselor 36.21

13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 27.80 13012 - Exhibits Specialist II 34.45 13013 - Exhibits Specialist III 42.14 13041 - Illustrator I 25.77 13042 - Illustrator II 31.93 13043 - Illustrator III 39.06 13047 - Librarian 39.49 13050 - Library Aide/Clerk 23.30 13054 - Library Information Technology Systems Administrator 35.66 13058 - Library Technician 27.21 13061 - Media Specialist I 25.73 13062 - Media Specialist II 28.78 13063 - Media Specialist III 32.10 13071 - Photographer I 20.54 13072 - Photographer II 22.98 13073 - Photographer III 28.47 13074 - Photographer IV 34.83 13075 - Photographer V 42.15 13090 - Technical Order Library Clerk 29.25 13110 - Video Teleconference Technician 27.34

14000 - Information Technology Occupations 14041 - Computer Operator I 23.27 14042 - Computer Operator II 26.03 14043 - Computer Operator III 29.02 14044 - Computer Operator IV 32.24 14045 - Computer Operator V 35.71 14071 - Computer Programmer I (see 1) 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 23.27 14160 - Personal Computer Support Technician 32.24 14170 - System Support Specialist 35.71

15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 42.21 15020 - Aircrew Training Devices Instructor (Rated) 51.09 15030 - Air Crew Training Devices Instructor

(Pilot) 61.23 15050 - Computer Based Training Specialist / Instructor 42.21 15060 - Educational Technologist 45.33 15070 - Flight Instructor (Pilot) 61.23 15080 - Graphic Artist 36.33 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 61.23 15086 - Maintenance Test Pilot, Rotary Wing 61.23 15088 - Non-Maintenance Test/Co-Pilot 61.23 15090 - Technical Instructor 30.26 15095 - Technical Instructor/Course Developer 37.02 15110 - Test Proctor 24.43 15120 - Tutor 24.43

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 19.37 16030 - Counter Attendant 19.37 16040 - Dry Cleaner 22.15 16070 - Finisher, Flatwork, Machine 19.37 16090 - Presser, Hand 19.37 16110 - Presser, Machine, Drycleaning 19.37 16130 - Presser, Machine, Shirts 19.37 16160 - Presser, Machine, Wearing Apparel, Laundry 19.37 16190 - Sewing Machine Operator 23.08 16220 - Tailor 23.98 16250 - Washer, Machine 20.30

19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 30.74 19040 - Tool And Die Maker 37.39

21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 25.06 21030 - Material Coordinator 29.55 21040 - Material Expediter 29.55 21050 - Material Handling Laborer 22.17 21071 - Order Filler 21.37 21080 - Production Line Worker (Food Processing) 25.06 21110 - Shipping Packer 23.16 21130 - Shipping/Receiving Clerk 23.16 21140 - Store Worker I 17.84 21150 - Stock Clerk 22.85 21210 - Tools And Parts Attendant 25.06 21410 - Warehouse Specialist 25.06

23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 42.45 23019 - Aircraft Logs and Records Technician 33.77 23021 - Aircraft Mechanic I 40.27 23022 - Aircraft Mechanic II 42.45 23023 - Aircraft Mechanic III 44.61 23040 - Aircraft Mechanic Helper 29.39 23050 - Aircraft, Painter 38.11 23060 - Aircraft Servicer 33.77 23070 - Aircraft Survival Flight Equipment Technician 38.11 23080 - Aircraft Worker 35.86 23091 - Aircrew Life Support Equipment (ALSE) Mechanic I 35.86 23092 - Aircrew Life Support Equipment (ALSE) Mechanic II 40.27 23110 - Appliance Mechanic 26.85 23120 - Bicycle Repairer 23.04 23125 - Cable Splicer 65.05 23130 - Carpenter, Maintenance 34.80 23140 - Carpet Layer 27.81 23160 - Electrician, Maintenance 50.53 23181 - Electronics Technician Maintenance I 40.82 23182 - Electronics Technician Maintenance II 43.38 23183 - Electronics Technician Maintenance III 45.84 23260 - Fabric Worker 32.94 23290 - Fire Alarm System Mechanic 37.56 23310 - Fire Extinguisher Repairer 30.80 23311 - Fuel Distribution System Mechanic 47.30 23312 - Fuel Distribution System Operator 37.09 23370 - General Maintenance Worker 28.25 23380 - Ground Support Equipment Mechanic 40.27 23381 - Ground Support Equipment Servicer 33.77 23382 - Ground Support Equipment Worker 35.86 23391 - Gunsmith I 30.80 23392 - Gunsmith II 34.98 23393 - Gunsmith III 39.29 23410 - Heating, Ventilation And Air-Conditioning Mechanic 31.38 23411 - Heating, Ventilation And Air Contidioning Mechanic (Research Facility) 33.08 23430 - Heavy Equipment Mechanic 37.75 23440 - Heavy Equipment Operator 38.00 23460 - Instrument Mechanic 36.77 23465 - Laboratory/Shelter Mechanic 37.18 23470 - Laborer 22.17 23510 - Locksmith 24.17 23530 - Machinery Maintenance Mechanic 37.84 23550 - Machinist, Maintenance 30.85 23580 - Maintenance Trades Helper 21.60 23591 - Metrology Technician I 36.77 23592 - Metrology Technician II 38.75 23593 - Metrology Technician III 40.73 23640 - Millwright 37.00 23710 - Office Appliance Repairer 23.34 23760 - Painter, Maintenance 25.62 23790 - Pipefitter, Maintenance 48.56 23810 - Plumber, Maintenance 45.96 23820 - Pneudraulic Systems Mechanic 39.29 23850 - Rigger 39.27

23870 - Scale Mechanic 34.98 23890 - Sheet-Metal Worker, Maintenance 38.26 23910 - Small Engine Mechanic 25.67 23931 - Telecommunications Mechanic I 35.56 23932 - Telecommunications Mechanic II 37.49 23950 - Telephone Lineman 35.31 23960 - Welder, Combination, Maintenance 29.83 23965 - Well Driller 35.36 23970 - Woodcraft Worker 39.29 23980 - Woodworker 30.80

24000 - Personal Needs Occupations 24550 - Case Manager 24.86 24570 - Child Care Attendant 19.03 24580 - Child Care Center Clerk 23.74 24610 - Chore Aide 21.55 24620 - Family Readiness And Support Services Coordinator 24.86 24630 - Homemaker 24.86

25000 - Plant And System Operations Occupations 25010 - Boiler Tender 39.40 25040 - Sewage Plant Operator 40.32 25070 - Stationary Engineer 39.40 25190 - Ventilation Equipment Tender 28.75 25210 - Water Treatment Plant Operator 40.32

27000 - Protective Service Occupations 27004 - Alarm Monitor 39.02 27007 - Baggage Inspector 20.12 27008 - Corrections Officer 42.11 27010 - Court Security Officer 41.56 27030 - Detection Dog Handler 22.51 27040 - Detention Officer 42.11 27070 - Firefighter 41.34 27101 - Guard I 20.12 27102 - Guard II 22.51 27131 - Police Officer I 42.07 27132 - Police Officer II 46.73

28000 - Recreation Occupations 28041 - Carnival Equipment Operator 22.35 28042 - Carnival Equipment Repairer 24.01 28043 - Carnival Worker 17.29 28210 - Gate Attendant/Gate Tender 25.06 28310 - Lifeguard 17.48 28350 - Park Attendant (Aide) 28.04 28510 - Recreation Aide/Health Facility Attendant 20.47 28515 - Recreation Specialist 34.73 28630 - Sports Official 22.34 28690 - Swimming Pool Operator 27.27

29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 43.10 29020 - Hatch Tender 43.10 29030 - Line Handler 43.10 29041 - Stevedore I 40.57 29042 - Stevedore II 45.80

30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 50.14 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 34.58 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 38.07 30021 - Archeological Technician I 23.60 30022 - Archeological Technician II 26.40 30023 - Archeological Technician III 32.69 30030 - Cartographic Technician 32.69 30040 - Civil Engineering Technician 40.98 30051 - Cryogenic Technician I 36.21 30052 - Cryogenic Technician II 39.99 30061 - Drafter/CAD Operator I 23.60 30062 - Drafter/CAD Operator II 26.40 30063 - Drafter/CAD Operator III 29.41 30064 - Drafter/CAD Operator IV 36.21 30081 - Engineering Technician I 19.71 30082 - Engineering Technician II 22.12 30083 - Engineering Technician III 24.75 30084 - Engineering Technician IV 30.66 30085 - Engineering Technician V 37.50 30086 - Engineering Technician VI 45.38 30090 - Environmental Technician 30.04 30095 - Evidence Control Specialist 32.69 30210 - Laboratory Technician 27.31 30221 - Latent Fingerprint Technician I 39.76 30222 - Latent Fingerprint Technician II 43.92 30240 - Mathematical Technician 34.29 30361 - Paralegal/Legal Assistant I 23.93 30362 - Paralegal/Legal Assistant II 29.64 30363 - Paralegal/Legal Assistant III 36.26 30364 - Paralegal/Legal Assistant IV 43.88 30375 - Petroleum Supply Specialist 39.99 30390 - Photo-Optics Technician 32.69 30395 - Radiation Control Technician 39.99 30461 - Technical Writer I 28.62 30462 - Technical Writer II 35.01 30463 - Technical Writer III 42.35 30491 - Unexploded Ordnance (UXO) Technician I 31.87 30492 - Unexploded Ordnance (UXO) Technician II 38.56 30493 - Unexploded Ordnance (UXO) Technician III 46.21 30494 - Unexploded (UXO) Safety Escort 31.87 30495 - Unexploded (UXO) Sweep Personnel 31.87 30501 - Weather Forecaster I 36.21

30502 - Weather Forecaster II 44.04 30620 - Weather Observer, Combined Upper Air Or Surface Programs (see 2) 29.41 30621 - Weather Observer, Senior (see 2) 32.69

31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 38.56 31020 - Bus Aide 26.61 31030 - Bus Driver 36.08 31043 - Driver Courier 21.35 31260 - Parking and Lot Attendant 18.98 31290 - Shuttle Bus Driver 20.65 31310 - Taxi Driver 16.50 31361 - Truckdriver, Light 22.94 31362 - Truckdriver, Medium 24.53 31363 - Truckdriver, Heavy 30.67 31364 - Truckdriver, Tractor-Trailer 30.67

99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 18.80 99030 - Cashier 17.58 99050 - Desk Clerk 18.73 99095 - Embalmer 29.76 99130 - Flight Follower 31.87 99251 - Laboratory Animal Caretaker I 21.97 99252 - Laboratory Animal Caretaker II 23.60 99260 - Marketing Analyst 41.62 99310 - Mortician 29.76 99410 - Pest Controller 22.84 99510 - Photofinishing Worker 24.28 99710 - Recycling Laborer 34.70 99711 - Recycling Specialist 40.96 99730 - Refuse Collector 31.69 99810 - Sales Clerk 17.95 99820 - School Crossing Guard 22.87 99830 - Survey Party Chief 36.65 99831 - Surveying Aide 21.61 99832 - Surveying Technician 29.59 99840 - Vending Machine Attendant 22.68 99841 - Vending Machine Repairer 27.67 99842 - Vending Machine Repairer Helper 22.68

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Note: Executive Order 13658 generally applies to contracts subject to the Service Contract Act that were awarded on or between January 1, 2015 and January 29, 2022, and that have not been renewed or extended on or after January 30, 2022. If a contract is subject to Executive Order 13658, the contractor must pay all covered workers at least $13.65 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract from May 1 Additional information on contractor requirements and worker protections under Executive Order 13658 is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $5.92 per hour, up to 40 hours per week, or $236.80 per week or $1,026.13 per month

HEALTH & WELFARE EO 13706: $5.42 per hour, up to 40 hours per week, or $216.80 per week, or $939.46 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 5 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Juneteenth National Independence Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: This wage determination does not apply to any individual employed in a bona fide executive, administrative, or professional capacity, as defined in 29 C.F.R. Part 541. (See 41 C.F.R. 6701(3)). Because most Computer Systems Analysts and Computer Programmers who are paid at least $27.63 per hour (or at least $684 per week if paid on a salary or fee basis) likely qualify as exempt computer professionals under 29 U.S.C. 213(a)(1) and 29 U.S.C. 213(a)(17), this wage determination may not include wage rates for all occupations within those job families. In such instances, a conformance will be necessary if there are nonexempt employees in these job families working on the contract.

Job titles vary widely and change quickly in the computer industry, and are not determinative of whether an employee is an exempt computer professional. To be exempt, computer employees who satisfy the compensation requirements must also have a primary duty that consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

Any computer employee who meets the applicable compensation requirements and the above duties test qualifies as an exempt computer professional under both section 13(a)(1) and section 13(a)(17) of the Fair Labor Standards Act. (Field Assistance Bulletin No. 2006-3 (Dec. 14, 2006)). Accordingly, this wage determination will not apply to any exempt computer employee regardless of which of these two exemptions is utilized.

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of """"wash and wear"""" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the """"Service Contract Act Directory of Occupations"""", Fifth Edition (Revision 1), dated September 2015, unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE, Standard Form 1444 (SF-1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification, wage rate, and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract, a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .