B01_Synopsis_of_Proposed_Contract_Action-Public_Request_for_SF-330_1.pdf

United States Department of the Interior

FISH AND WILDLIFE SERVICE

Request for SF 330 Submissions

General Information:

Public Announcement Number: DOIFFBO260168 Response Date: September 28, 2026, by 10:00 AM PDT Question Cutoff Date: September 11, 2026, by 10:00 AM PDT Set Aside: 100% Small Business NAICS Code: 541330 Size Standard: $16.50 Million

Description:

This is a request for SF 330 submissions. The U.S. Fish and Wildlife Service (USFWS) is seeking qualification statements from Architect-Engineering firms for construction management services which include support during solicitation of the Consolidated Projects on Midway Atoll National Wildlife Refuge (NWR), refer to the Statement of Work (SOW) for task breakdown. The project takes place on Midway Atoll NWR, which is a 2.4 sq mi atoll in the North Pacific Ocean. Midway is in the northwestern part of the Hawaiian archipelago at N 28° 12’ and W 177° 21’.

Offer Affordability: To assist A-E firms with assessing the magnitude of A-E services to be performed, the Government estimates that approximately $350,000.00 to $475,000.00 of services/level of effort are required to meet all requirements. A-E firms should not interpret this range as a price floor or ceiling; rather, this information is provided as a courtesy to prospective firms. The Government may award to a firm considered most highly qualified to perform the work, within or outside the stated range if it determines that the proposal is reasonably priced and sufficient funds are available.

Work Requirements:

Attachment 1: Statement of Work Attachment 2: Midway Design Build General Requirements

Contracting Officer/Point of Contact: All inquiries regarding this announcement must be submitted in writing via email only, by the required question deadline. No calls will be returned as all inquiries must be submitted via email.

Shanen Fox, Email: shanen_fox@ios.doi.gov

Contract Structure:

The U.S. Fish and Wildlife Service (USFWS) intends to award one firm-fixed price contract for Architect- Engineering Services.

Required Registration:

To be eligible for contract award, a firm must be registered in the System for Award Management (SAM) and active by the closing of this announcement. Failure to register in SAM.gov may render a firm ineligible for award. SAM registration is free of charge and can be completed at www.sam.gov.

In accordance with FAR 36.601-4(b), the Firm must be a registered/licensed engineering firm to be eligible for award. Provide proof that the firm is permitted by law to practice the profession of engineering (e.g. state http://www.sam.gov/ registration number, or a brief explanation of the firm’s licensing in jurisdictions that do not register firms). As part of SF 330 Section E. Resumes of Key Personnel Proposed for Team, Firms are asked to include Current Professional Registration Number(s), Registered Discipline(s), and State of Registration(s) for individuals.

Failure to submit the required proof may result in exclusion of a firm from consideration. Architects and engineers performing, supervising, or sealing A-E design work for this contract must hold current, valid professional licenses issued/held in Hawaii, Montana, or in any state that has reciprocity with either.

Because Midway Atoll has no local licensing authority, the Government requires that all stamped/signature design documents be produced and sealed in the state where the A-E professionals are licensed and where the work is performed (i.e., the A-E firm’s branch office location performing the design). Midway Atoll is not under any state’s jurisdiction, therefore project licensure must be held in Hawaii, Montana, or in any state that has reciprocity with either.

Questions and Inquiries:

Contact Shanen Fox, Contracting Officer. Contact may be made via email to shanen_fox@ios.doi.gov. All inquiries and questions shall be submitted in writing via email only by the cutoff date and time listed above.

Nothing in this request is changed unless an amendment is posted to sam.gov as an amendment prior to submission.

Instructions to Firms:

Firms that meet the requirements described herein are invited to complete a SF 330 Package. The form can be sourced from https://www.gsa.gov/portal/forms/download/116486

The only acceptable method of submission is by email to CO at shanen_fox@ios.doi.gov by the required deadline. Extensions will not be granted unless the CO determines it’s in the best interest of the Government.

See Evaluation Criteria below for specific submission requirements.

Firms must complete an SF 330 package in accordance with the following:

• Cover Page

• Table of Contents

• Acknowledgement of Amendments (if applicable)

• SF 330 form.

o Note that attachments may be prepared using MS Word or PDF

• The SF330 form must be 11-point legible font or larger.

• Submissions shall not exceed 50 typed single-sided 8.5 by 11-inch pages.

o The page limit DOES NOT include licenses or cover sheets, provided that these do not contain any substantive information submitted in response to the synopsis or intended to demonstrate the qualifications of the firm.

o Submission shall be numbered sequentially.

o Resumes shall be limited to 1 page per team member o Example projects shall be limited to 1 page per project

EVALUATION

Submissions received in response to this notice will be evaluated by a board in accordance with FAR Subpart

36.6 and PL 95-582 (The Brooks Act). Evaluation will be conducted in order to determine the most highly qualified firms to perform the required services in accordance with the evaluation factors. Failure to comply with instruction or provide complete information may affect the outcome of the firm’s evaluation or possibly disqualify the firm from further consideration.

https://www.gsa.gov/portal/forms/download/116486 mailto:shanen_fox@ios.doi.gov

EVALUATION FACTORS

The A/E firm must demonstrate qualifications and the qualifications of each key team member with respect to the following criteria:

FACTOR 1: Professional Qualifications: SF 330, Part I, Section C and E

Firms will be evaluated on Professional qualifications, competence, educational background, training, and experience of the proposed key personnel in providing services to accomplish the tasks required under this contract, including participation in example projects in the SF330, Part I, Section G. Key personnel are individuals who will have major contract or project management responsibilities and/or will provide unusual or unique expertise. Note that a professional engineering license, registration, or certification is required in the state where the firm will do work. Firms shall provide a registration number and State registration in resume or type of certification as applicable. Indicate if licensure can be achieved by reciprocity for states where the firm’s key personnel are currently registered.

Submission Requirements

Complete SF 330 Part I, Section E, for each key person who will participate in this contract with registration/licensing in the State of where the A-E work will be performed and provide resumes for each.

Midway Atoll is not under any state’s jurisdiction, project licensure must be held in Hawaii, Montana, or in any state that has reciprocity with either. Any key subcontractors shall provide resume(s) as well. The prime contractor shall utilize the same subcontractors for the duration of the contract unless the Contracting Officer approves a substitution.

Resumes are limited to one page each and should indicate: professional registration, certification, licensure and/or accreditation in appropriate disciplines; cite recent (within the past seven (7) years) project-specific experience in work relevant to the services required under this contract; and indicate proposed role in this contract. Indicate participation of key personnel in example projects in the SF330, Part I, Section G.

Substitutions of Key Personnel after award must be approved by the Contracting Officer.

FACTOR 2: Specialized Experience/Technical Competence: SF 330, Part I, Section F

On the SF 330 Part I, Section F, submit a narrative describing the A/E firm’s most relevant experience. Firms will be evaluated on the strength of submitted specialized experience narratives; the narratives shall address the following areas:

1. Specialized experience of the proposed team in design, design/submittal review and approval, construction inspection services, and as-built drawings as they relate to the scope of this A-E project.

2. Specialized experience in construction management services for successful completion of the work as described in the Statement of Work (SOW)

3. Specialized experience working with contractors during construction to document any field changes, answer questions, provide design revisions, and provide as-built drawings at the completion of the project by CAD standards.

Submission Requirements:

1. Provide a minimum of three (3) projects completed within the past seven (7) years that best illustrate specialized experience of the proposed team in design, design/submittal review and approval, construction inspection services, and as-built drawings as they relate to the scope of this A-E project.

Indicate number of years of experience with these project types.

2. All projects provided in the SF 330 must be completed by the actual office/branch/regional office/individual team member proposed to manage work under this contract.

3. For submittal purposes, a task order on an IDIQ contract is considered a project, as is a stand-alone contract award. Do not submit an IDIQ contract as an example project. Instead, list relevant task orders or stand-alone contract awards that fit within the definition above. The Government will not evaluate information provided for an IDIQ contract. Examples of project work submitted that do not conform to this requirement will not be evaluated.

4. To enable verification, firms should include the SAM UEI number along with each firm name in the SF330 Part I, Section F, block 25, “Firm Name”. Include a contract number or project identification number along with the title and location in block 21. Include an e-mail address along with phone number for the point of contact in block 23(c). In block 24, include in the project description the contract period of performance, award contract value, current contract value, and a summary of the work performed that demonstrates relevance to specialized experience as outlined above.

5. For projects performed as a subcontractor or a joint venture involving different partners, specifically indicate the value of the work performed as a subcontractor or by those firms proposed for this contract, and identify the specific roles and responsibilities performed as a subcontractor or by those firms on the project rather than the work performed on the project as a whole.

FACTOR 3: Capacity and Contract Management: SF 330, Part I, Section H (Organizational Chart- Section D)

Firms will be evaluated on the ability to plan for and manage work under this contract, the capacity to accomplish the work in the required time.

Submission Requirements

1. Provide a narrative to describe the team’s ability to provide timely response to requests for on-site support and how conflicts in capacity are handled. Include a description of the firm’s present workload.

Describe the workload/availability of the key personnel during the anticipated contract performance period and the ability of the firm to provide qualified backup staffing for key personnel to ensure continuity of services. General statements of availability/capacity may be considered less favorably.

2. Provide an organizational chart for the team and discuss the management plan for this contract and personnel roles in the organization. Describe the ability of the firm to manage, coordinate, and work effectively with team members, both internal staff and consultants. Discuss the history of working relationships with team members, including joint venture partners where applicable.

FACTOR 4: Past Performance: SF 330, Part I, Section H

Firms will be evaluated on past performance based on information contained within the SF 330 package to include example projects submitted in Section F. Special emphasis will be placed on:

• Quality and accuracy of work

• Compliance with performance schedules and contract requirements

• Cost control and efficient use of resources

• Stakeholder/customer satisfaction

• Business relations including effective management, reasonable and cooperative relationship with program and management personnel to include mission or contract changes and an overall concern for the customer’s interest

• Timeliness of performance and adherence to contract schedules

• Response to technical direction and contract administration

In addition, the Government may review any other sources of information for evaluating past performance.

Other sources may include, but are not limited to, past performance information retrieved through the Past Performance Information Retrieval System (PPIRS) using all CAGE/DUNS numbers of firm team members (partnership, Joint Venture, or parent company’s subsidiary or affiliate), inquiries of owner representative(s), and any other known sources not provided by the firm. While the Government may elect to consider data from other sources, the burden of providing detailed, current, accurate and complete past performance information rests with the firm. A firm without a record of relevant past performance or for whom information on past performance is not available shall not be evaluated favorably or unfavorably on past performance.

Submission Requirements:

For the projects listed under Specialized Experience/Technical Competence, Firms must include the name of the primary point of contact, phone number, and email address. Firms may provide any supplemental information on problems encountered and the corrective actions taken on projects submitted under in SF 330, Part I, Section F. Firms may also address any adverse past performance issues. Firms can also submit recognition documents received in the last five years, such as awards from clients, customers or professional organizations received within the last five (5) years. Firms may submit information on any innovative ideas and/or material uses from past projects.

FACTOR 5 Location in the General Geographical Area of the Project and Knowledge of the Locality (Section H)

Firms will be evaluated on demonstrated knowledge of the general geographic areas (Midway Atoll and/or other remote pacific islands).

Submission Requirements:

1. Provide a narrative describing the team’s knowledge of the general geographic area in which the project is located or other remote pacific islands.

2. Provide the location of the office(s) that will be performing the work, including main offices, branch offices, and offices of team members. Evaluation will consider geographic location based on proximity to Midway.

SELECTION OF THE MOST HIGHLY QUALIFIED FIRMS AFTER SF 330 EVALUATIONS:

Following the board’s evaluation of SF330s, selection of up to five (5) of the most highly qualified firms will be determined and discussions will be held with these firms in accordance with FAR 36.602-1 (c)

All firms of the most highly qualified firms will be asked similar questions, which may include topics such as experience, capabilities, capacity, organization, management, quality control procedures, and approach for the project, as appropriate.

Following completion of discussions, the board will select the most highly qualified firm. A Request for Proposal (RFP) will be issued to the most highly qualified firm with award of one firm-fixed price contract if a fair and reasonable price can be agreed upon. If a fair and reasonable price cannot be agreed upon, the Service will move to negotiations with the next highest ranked firm. This process will continue until award can be made to the highest ranked firm providing a fair and reasonable price.