B01 - Attachment 0001 - Scope of Work Portfolio Lumber BOA - 25 August 2026.pdf

Attachment 0001: Scope of Work- Lumber Basic Ordering Agreement 25 August 2026

SCOPE OF MATERIAL:

A general scope of material is listed below to be ordered against Basic Ordering Agreements (BOA) but is not limited to the following item list below.

Scope of Work- Blue Grass Army Depot

Hardwood Lumber

• Lumber, Untreated 1x4. Cut to 3 ½ inches wide plus or minus 1/16 inch. 35 inches long plus 1/8 inch or minus ¼ inch. Thickness ¾ inch plus or minus 1/16 inch.

• Lumber, Untreated 1x4. Cut to 3 ½ inches wide plus 0 inches or minus 1/4 inch. 45 1/2 inches long plus 1/8 inch or minus ¼ inch. Thickness ¾ inch plus or minus 1/16 inch.

• Lumber, Untreated 1x6. Cut to 5 ½ inches wide plus 0 inches or minus 1/4 inch. 45 1/2 inches long plus 1/8 inch or minus ¼ inch. Thickness ¾ inch plus or minus 1/16 inch.

• Lumber, Untreated 1x8. Cut to 7 1/4 inches wide plus or minus 1/16 inch. 35 inches long plus 1/8 inch or minus ¼ inch. Thickness ¾ inch plus or minus 1/16 inch

• Lumber, Untreated 1x8. Cut to 7 1/4 inches wide plus 0 inches or minus 1/4 inch.

45 1/2 inches long plus 1/8 inch or minus ¼ inch. Thickness ¾ inch plus or minus 1/16 inch.

• Lumber, Untreated 1x4. Cut to 3 ½ inches wide plus or minus 1/16 inch. 40 inches long plus 1/8 inch or minus ¼ inch. Thickness ¾ inch plus or minus 1/16 inch.

• Lumber, Untreated 1x4. Cut to 3 ½ inches wide plus 0 inches or minus 1/4 inch. 48 inches long plus 1/8 inch or minus ¼ inch.

• Lumber, Untreated 1x6. Cut to 5 ½ inches wide plus 0 inches or minus 1/4 inch. 48 inches long plus 1/8 inch or minus ¼ inch.

• Lumber, Untreated 1x8. Cut to 7 1/4 inches wide plus or minus 1/16 inch. 40 inches long plus 1/8 inch or minus ¼ inch. Thickness ¾ inch plus or minus 1/16 inch

• Lumber, Untreated 4x3. Cut to 3 5/8 inches wide plus or minus 1/16 inch. 48 inches long plus 1/8 inch or minus ¼ inch. Thickness 2 3/4 inch plus or minus 1/16 inch.

Dimensional Softwood Lumber

• 2" X 4" X 10' Construction Grade HT Lumber

• 2" X 8" X 8' Construction Grade HT Lumber

• 4 x 4 x 8' Construction Grade HT Lumber

• 2 x 6 x 8' Construction Grade HT Lumber

• 2" X 6" X 10' Construction Grade HT Lumber

• 1/2" AC Plywood, 4' X 8' Sheets

• 1/2" AC Plywood, 4' X 8' Sheets

• 3/4" AC Plywood, 4' x 8'

• 1 x 6 x 8', Construction Grade HT Lumber

• 1 x 4 x 8', Construction Grade HT Lumber

• 2 x 8 x 8', Construction Grade HT Lumber

• 2 x 4 x 16', Construction Grade HT Lumber

• 2 x 6 x 16', Construction Grade HT Lumber

Scope of Work - Crane Army Ammunition Activity

Dimensional Southern Yellow Pine Lumber

• 1" x 4" x 8' Construction Grade HT Lumber - 5510-01-433-8579

• 1" x 6" x 8' Construction Grade HT Lumber – 5510-01-433-8595

• 1” x 12” x 12' Construction Grade HT Lumber – 5510-01-433-8629

• 2” x 4” x 89” Construction Grade HT Lumber – 5510-01-433-1216

• 2" x 4" x 12’ Construction Grade HT Lumber - 5510-01-433-1238

• 2” x 6” x 8' Construction Grade HT Lumber - 5510-01-433-1317

• 2” x 6” x 89” Special Cut Construction Grade HT Lumber - 5510-01-433-1317

• 2” x 6” x 90” Special Cut Construction Grade HT Lumber - 5510-01-433-1317

• 2” x 6” x 12' Construction Grade HT Lumber - 5510-01-433-1365

• 2” x 8” x 12' Construction Grade HT Lumber – 5510-01-433-4272

• 2” x 10” x 12' Construction Grade HT Lumber - 5510-01-433-4277

• 2” x 12” x 12’ Construction Grade HT Lumber - 5510-01-433-3906

• 4” x 4” x 8’ Construction Grade HT Lumber – 5510-01-433-4200

• 4” x 4” x 84-3/4” Construction Grade HT Lumber – 5510-01-433-4200

• 1/4" CD Plywood, 4' X 8' Sheets - 5530-00-129-7721

• 1/2" CD Plywood, 4' X 8' Sheets - 5530-00-129-7777

• 3/4" AC Plywood, 4' x 8' Sheets – 5530-00-129-7833 o EACH LOAD MUST BE

TARPED AND VERIFIED BY TCN UPON DELIVERY.

o NOTICE: OFFLOADS CANNOT BE GUARANTEED WITHOUT AN APPOINTMENT, WHICH MUST

BE SCHEDULED AT LEAST 48 HOURS PRIOR TO SHIPMENT. TO SCHEDULE AN APPOINTMENT,

PLEASE CALL (812)854-1278 WITH THE FOLLOWING LOAD DATA: BREAKDOWN: () BUNDLES @ ()

BOARDS PER BUNDLE = () BOARDS. YOU MUST SPEAK TO B-224 PERSONNEL TO MAKE THE

APPOINTMENT.

Strapping / Banding

• ¾” Strapping .035 Thick Steel Shiny Galvanized Banding (STEEL STRAPPING) - 8135-00-283-0670 o STEEL STRAPPING THREE QUARTER INCH TYPE, HEAVY DUTY GALVANIZED STEEL, ZINC COATED, GRADE 2 FINISH IAW ASTD 3953 87.

o MATERIAL MUST BE SECURED TO SKIDS AND ACCOMPANIED BY A CERTIFICATE OF

PERFORMANCE. o DELIVERY MUST BE PERFORMED BY APPOINTMENT ONLY WHICH MUST BE

SCHEDULED AT LEAST 48 HOURS PRIOR TO SHIPMENT. TO SCHEDULE AN APPOINTMENT

PLEASE CALL (812)854 1278. YOU MUST SPEAK TO B-224 PERSONNEL TO MAKE THE

APPOINTMENT.

• 1 ¼” Strapping .035 Thick Steel Shiny Galvanized Banding (STEEL STRAPPING) - 8135-00-283-0671 o STEEL STRAPPING 1 1/4” FLAT TYPE, HEAVY DUTY GALVANIZED STEEL, ZINC COATED, GRADE 2 FINISH IAW ASTD 3953-87. PARTIAL LOADS AND OR MIXED REQUISITIONS ARE NOT ACCEPTABLE.

o MATERIAL MUST BE SECURED TO SKIDS AND ACCOMPANIED BY A CERTIFICATE OF

PERFORMANCE.

o DELIVERY MUST BE PERFORMED BY APPOINTMENT ONLY WHICH MUST BE SCHEDULED AT

LEAST 48 HOURS PRIOR TO SHIPMENT. TO SCHEDULE AN APPOINTMENT PLEASE CALL

(812)854-1278. YOU MUST SPEAK TO B-224 PERSONNEL TO MAKE THE APPOINTMENT.

Scope of Work – Joint Munitions Technology Center

Softwood Lumber

National Stock Number Size (IN) Length (FT)

RIA1X4X10:19204 1"X4" 10

RIA1X6X10:19204 1"X6" 10

RIA1X8X10:19204 1"X8" 10

RIA1X10X10:19204 1"X10" 10

RIA1X12X10:19204 1"X12" 10

RIA2X4X10:19204 2"X4" 10

RIA2X6X10:19204 2"X6" 10

RIA2X8X10:19204 2"X8" 10

RIA2X10X10:19204 2"X10" 10

RIA2X12X10:19204 2"X12" 10

RIA4X4X10:19204 4"X4" 10

Other Lumber

RIA2X12X12:19204 2"X12" 12

RIA4X6X12:19204 4"X6" 12

Scope of Work - Letterkenny Munitions Command

• 5510-01-433-8579: 1x 4x8', Construction Grade HT Lumber

• 5510-01-433-8589: 1x4x12’, Construction Grade HT Lumber – Less than 1000BF

• 5510-01-433-1145: 1x4x16’, Construction Grade HT Lumber – Less than 1000BF

• 5510-01-433-8595: 1x6x8’, Construction Grade HT Lumber – Less than 2500BF

• 5510-01-433-8603: 1x6x12’, Construction Grade HT Lumber – Less than 1000BF

• 5510-01-433-8609: 1x8x8’, Construction Grade HT Lumber – Less than 2000BF

• 5510-01-433-1216: 2x4x8’, Construction Grade HT Lumber

• 5510-01-433-1238: 2x4x12’, Construction Grade HT Lumber

• 5510-01-433-1244: 2x4x16’, Construction Grade HT Lumber

• 5510-01-433-1317: 2x6x8’, Construction Grade HT Lumber

• 5510-01-433-1365: 2x6x12’, Construction Grade HT Lumber

• 5510-01-433-4272: 2x8x12’, Construction Grade HT Lumber

• 5510-01-433-4269: 2x8x14’, Construction Grade HT Lumber

• 5510-01-433-1377: 2x6x16’, Construction Grade HT Lumber

• 5510-01-433-4275: 2x10x10’, Construction Grade HT Lumber

• 5510-01-433-4200: 4x4x8’, Construction Grade HT Lumber

• 5510-01-433-4208: 4x4x10’, Construction Grade HT Lumber

• 5510-01-433-4237: 4x6x10, Construction Grade HT Lumber

• 5510-01-433-4215: 4x4x12’, Construction Grade HT Lumber

• 5530-00-129-7721: ¼” Plywood

• 5530-00-129-7777: ½” Plywood

• 5530-00-129-7833: ¾” Plywood

Scope of Work - McAlester Army Ammunition Plant

• DIMENSON: 1in X 8in X 45 1/2in 1in THICKNESS, CUT TO 3/4in - TOLERANCE (+1/8/-0) 8in WIDTH, CUT TO 7 1/2in - TOLERANCE (+1/8/-0) 45 1/2in LENGTH - TOLERANCE (+1/8/-0)

• DIMENSON: 1in X 6in X 45 1/2in 1in THICKNESS, CUT TO 3/4in - TOLERANCE (+1/8/-0) 6in WIDTH, CUT TO 5 1/2in - TOLERANCE (+1/8/-0) 45 1/2in LENGTH - TOLERANCE (+1/8/-0)

• DIMENSON: 1in X 4in X 45 1/2in 1in THICKNESS, CUT TO 5/8 - TOLERANCE (+1/8/-0) 4in WIDTH, CUT TO 3 3/4in - TOLERANCE (+1/8/-0) 45 1/2in LENGTH - TOLERANCE (+1/8/-0)

• DIMENSON: 1in X 8in X 35in 1in THICKNESS, CUT TO 3/4in - TOLERANCE (+1/8/-0) 8in WIDTH, CUT TO 7 1/4in - TOLERANCE (+1/8/-0) 35in LENGTH - TOLERANCE (+1/8/-0)

• DIMENSON: 1in X 4in X 35in 1in THICKNESS, CUT TO 3/4in - TOLERANCE (+1/8/-0) 4in WIDTH, CUT TO 3 5/8in - TOLERANCE (+1/8/0) 35in LENGTH - TOLERANCE (+1/8/-0)

• DIMENSON: 1in X 6in X 48in 1in THICKNESS, CUT TO 3/4in - TOLERANCE (+1/8/-0) 6in WIDTH, CUT TO 5 5/8in - TOLERANCE (+1/8/-0) 48in LENGTH - TOLERANCE (+1/8/-0)

• DIMENSON: 1in X 4in X 48in 1in THICKNESS, CUT TO 3/4in - TOLERANCE (+1/8/-0) 4in WIDTH CUT TO 3 3/4in - TOLERANCE (+1/8/-0) 48in LENGTH - TOLERANCE (+1/8/-0)

• DIMENSON: 1in X 8in X 40in 1in THICKNESS, CUT TO 3/4in - TOLERANCE (+1/8/-0) 8in WIDTH, CUT TO 7 1/4in - TOLERANCE (+1/8/-0) 40in LENGTH - TOLERANCE (+1/8/-0)

• DIMENSON: 1in X 4in X 40in 1in THICKNESS, CUT TO 3/4in - TOLERANCE (+1/8/-0) 4in WIDTH, CUT TO 3 5/8in - TOLERANCE (+1/8/-0) 40in LENGTH - TOLERANCE (+1/8/-0)

• DIMENSON: 4in X 3in X 48in (POST STOCK) 4in THICKNESS, CUT TO 3 5/8in - TOLERANCE (+1/8/-0) 3in WIDTH, CUT TO 2 3/4in - TOLERANCE (+1/8/-0) 48in LENGTH - TOLERANCE (+1/8/-0)

Dimensional Softwood Lumber

• 1”x4”x16’ Construction Grade HT Lumber

• 1”x6”x16’ Construction Grade HT Lumber

• 1”x8”x16’ Construction Grade HT Lumber

• 1”x10”x16’ Construction Grade HT Lumber

• 1”x12”x16’ Construction Grade HT Lumber

• 2”x4”x10’ Construction Grade HT Lumber

• 2”x4”x16’ Construction Grade HT Lumber

• 2”x6”x16’ Construction Grade HT Lumber

• 2”x8”x16’ Construction Grade HT Lumber

• 2”x10”x16’ Construction Grade HT Lumber

• 2”x12”x16’ Construction Grade HT Lumber

• 4”x4”x10’ Construction Grade HT Lumber

• 4”x4”x16’ Construction Grade HT Lumber

• 1/4” CDX Plywood, 4’x8’ Sheets

• 1/2” CDX Plywood, 4’x8’ Sheets

• 5/8” CDX Plywood, 4’x8’ Sheets

• 3/4” CDX Plywood, 4’x8’ Sheets

Hardwood Quantity

• 1x4x40 – 10,000 pieces

• 1x4x48 – 20,000 pieces

• 1x6x48 – 80,000 pieces

• 2x8x40 – 20,000 pieces

• 1x4x35 – 10,000 pieces

• 1x4x45.5 – 20,000 pieces

• 1x6x45.5 – 50,000 pieces

• 1x8x35 – 20,000 pieces

• 1x8x45.5 – 20,000 pieces

• 4x3x48 – 30,000 pieces

Hardwood lumber is purchased by the piece. This quantity can fluctuate due to demand from 5,000 – 15,000.

Dimensional Softwood Lumber Quantity

• 1”x4”x16’ Construction Grade HT Lumber – 50,752 BF

• 1”x6”x16’ Construction Grade HT Lumber - 47,104 BF

• 1”x8”x16’ Construction Grade HT Lumber - 2,112 BF

• 1”x10”x16’ Construction Grade HT Lumber – 0 BF

• 1”x12”x16’ Construction Grade HT Lumber – 0 BF

• 2”x4”x10’ Construction Grade HT Lumber – 36,917 BF

• 2”x4”x16’ Construction Grade HT Lumber – 623,458 BF

• 2”x6”x16’ Construction Grade HT Lumber – 651,264 BF

• 2”x8”x16’ Construction Grade HT Lumber – 326,892 BF

• 2”x10”x16’ Construction Grade HT Lumber – 31,999 BF

• 2”x12”x16’ Construction Grade HT Lumber – 6,144 BF

• 4”x4”x10’ Construction Grade HT Lumber – 0 BF

• 4”x4”x16’ Construction Grade HT Lumber – 235,765 BF

• 1/4” CDX Plywood, 4’x8’ Sheets – 0 SH

• 1/2” CDX Plywood, 4’x8’ Sheets – 8,884 SH

• 5/8” CDX Plywood, 4’x8’ Sheets – 0 SH

• 3/4” CDX Plywood, 4’x8’ Sheets – 6,390 SH

Softwood lumber is purchased by Board Foot (BF).

Scope of Work – Pine Bluff Arsenal

• Lumber, Untreated 1x4. Cut to 3 ½ inches wide plus or minus 1/16 inch. 35 inches long plus 1/8 inch or minus ¼ inch. Thickness ¾ inch plus or minus 1/16 inch.

• Lumber, Untreated 1x4. Cut to 3 ½ inches wide plus 0 inches or minus 1/4 inch. 45 1/2 inches long plus 1/8 inch or minus ¼ inch. Thickness ¾ inch plus or minus 1/16 inch.

• Lumber, Untreated 1x6. Cut to 5 ½ inches wide plus 0 inches or minus 1/4 inch. 45 1/2 inches long plus 1/8 inch or minus ¼ inch. Thickness ¾ inch plus or minus 1/16 inch.

• Lumber, Untreated 1x8. Cut to 7 1/4 inches wide plus or minus 1/16 inch. 35 inches long plus 1/8 inch or minus ¼ inch. Thickness ¾ inch plus or minus 1/16 inch

• Lumber, Untreated 1x8. Cut to 7 1/4 inches wide plus 0 inches or minus 1/4 inch. 45 1/2 inches long plus 1/8 inch or minus ¼ inch. Thickness ¾ inch plus or minus 1/16 inch.

• Lumber, Untreated 1x4. Cut to 3 ½ inches wide plus or minus 1/16 inch. 40 inches long plus 1/8 inch or minus ¼ inch. Thickness ¾ inch plus or minus 1/16 inch.

• Lumber, Untreated 1x4. Cut to 3 ½ inches wide plus 0 inches or minus 1/4 inch. 48 inches long plus 1/8 inch or minus ¼ inch.

• Lumber, Untreated 1x6. Cut to 5 ½ inches wide plus 0 inches or minus 1/4 inch. 48 inches long plus 1/8 inch or minus ¼ inch.

• Lumber, Untreated 1x8. Cut to 7 1/4 inches wide plus or minus 1/16 inch. 40 inches long plus 1/8 inch or minus ¼ inch. Thickness ¾ inch plus or minus 1/16 inch

• Lumber, Untreated 4x3. Cut to 3 5/8 inches wide plus or minus 1/16 inch. 48 inches long plus 1/8 inch or minus ¼ inch. Thickness 2 3/4 inch plus or minus 1/16 inch.

• 2" X 4" X 10' Construction Grade HT Lumber

• 2" X 8" X 8' Construction Grade HT Lumber

• 4 x 4 x 8' Construction Grade HT Lumber

• 2 x 6 x 8' Construction Grade HT Lumber

• 2" X 6" X 10' Construction Grade HT Lumber

• 1/2" AC Plywood, 4' X 8' Sheets

• 1/2" AC Plywood, 4' X 8' Sheets

• 3/4" AC Plywood, 4' x 8'

• 1 x 6 x 8', Construction Grade HT Lumber

• 1 x 4 x 8', Construction Grade HT Lumber

• 2 x 8 x 8', Construction Grade HT Lumber

• 2 x 4 x 16', Construction Grade HT Lumber

• 2 x 6 x 16', Construction Grade HT Lumber

Power Poles

• 35’ Class 3

• 40’ Class 3

• 45’ Class 3

Scope of Work - Tooele Army Depot

Dimension Description National Stock Number

1 x 4 x 192 Board Softwood 5510 01 433 1145

1 x 6 x 192 Board Softwood 5510 01 433 1173

1 x 8 x 192 Board Softwood 5510 01 433 1183

1 x 10 x 192 Board Softwood 5510 01 433 1193

1 x 12 x 192 Board Softwood 5510 01 433 1199

2 x 4 x 96 Board Softwood 5510 01 433 1216

2 x 4 x 192 Board Softwood 5510 01 433 1244

2 x 6 x 96 Board Softwood 5510 01 433 1217

2 x 6 x 192 Board Softwood 5510 01 433 1271

2 x 8 x 192 Board Softwood 5510 01 433 1277

2 x 10 x 192 Board Softwood 5510 01 433 1510

2 x 12 x 192 Board Softwood 5510 01 433 3930

3 x 6 x 192 Dimension Softwood 5510 01 433 9663

3 x 8 x 192 Dimension Softwood 5510 01 433 9660

4 x 4 x 96 Dimension Softwood 5510 01 433 4200

4 x 4 x 192 Dimension Softwood 5510 01 433 4221

4 x 6 x 192 Dimension Softwood 5510 01 433 4243

1/4 ACX Construction-Grade Plywood 5530 00 129 7721

3/8 CDX Construction Plywood 5530 00 618 6956

1/2 CDX Construction-Grade Plywood 5530 00 618 6958

5/8 CDX Construction Plywood 5530 00 618 6959

3/4 CDX Construction Plywood 5530 00 618 8073

7/16 OSB Construction Plywood 5530 01 408 2243