[B]_Spill_Prevention_and_Reporting_Procedures.pdf

PDF 33 KB Posted

Attached to
Fall 2026 Herbicide Release
Solicitation number
RFP-2025-0147
Issued by
Tuolumne County, Santa Monica City, California

About this file

Summary Not Available

The file "[B]_Spill_Prevention_and_Reporting_Procedures.pdf" could not be accessed or reviewed. No document content was provided for analysis. To deliver an accurate summary of this spill prevention and reporting procedures document, please provide the actual file contents or text.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Spill Prevention and Reporting Procedures

Modified from (B(T)6.341)

This plan provides specific information as to the nature and use of oil or hazardous materials in connection with the Fuels Reduction contract, persons responsible for the operation, prevention measures and corrective actions to be taken if a spill occurs.

General Nature and Type of Material Stored

Approx. Gallons Type Storage Type Material Purpose

General Prevention Measures

In addition to the above information, specific requirements to prevent a spill or minimize the impact are mutually agreed to by Forest Service and Contractor. These requirements include:

- Location shall be agreed to prior to storage.

- Purchaser shall insure all equipment is in good condition and has received proper maintenance to prevent spills. This includes transportation and storage equipment.

- All spills of oil, hydraulic fluid, diesel fuel, etc. as a result of improper maintenance of equipment (i.e. leaking) will be removed from National Forest land and deposited at an appropriate disposal site.

- All materials accumulated as a result of maintenance (i.e. oil filters, batteries, absorbent pads, etc.) will be removed from National Forest land and deposited at an appropriate disposal site.

Additional Prevention Measures

IF the total oil/oil products storage exceeds 1320 gallons or if any single container exceeds a capacity of 660 gallons, Contractor shall submit a Spill Prevention and Countermeasure Plan in accordance with EPA standards, including certification by a registered professional engineer.

In Case of a Spill

A spill is defined as the discharge of any oil or oil product, including hydraulic fluid and fuel (diesel or gasoline) which could be hazardous to the environment and may create a threat to public health and safety, wildlife, watersheds, and downstream property values.

Contractor will take immediate aggressive and reasonable action to prevent hazardous materials from entering a live stream. This can include, but is not limited to, straw, sand, and the construction of dikes or dams.

Contractor will immediately notify the people or organizations listed below.

Regardless of size or proximity to a stream course, all discharges of oil or other hazardous materials will be reported to one of the following individuals:

Name Phone

Project Manager:

Forest Service Representative:

Haz. Mat. Coordinator:

Dispatch:

They, in turn will notify appropriate agencies so a pollution response team can be activated if necessary.

In addition, spills that meet any of the following criteria must be reported to the Environmental Protection

Agency and State local authorities:

- All discharges of more than 100 gallons.

- All discharges which reach or would have reached, had they not been contained, perennial, intermittent and ephemeral streamcourses.

- All discharges which reach or would have reached streamcourses in time because of soil, vegetation, and potential run-off conditions and will have an adverse effect on down stream beneficial uses.

Notification to the EPA (phone 1-800-852-7550) will be done by the Contractor concurrent with initial spill response as determined by actual conditions.

24 hour Dispatch 209-532-3786

File details come from the government source that posted it. Updated .