B.08.02 W912DQ20R1073 Solicitation.pdf

SEE ADDENDUM

(No Collect Calls)

W912DQ20R1073 30-Jun-2020

b. TELEPHONE NUMBER

816-389-3500

8. OFFER DUE DATE/LOCAL TIME

12:00 AM 21 Jul 2020

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912DQ9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

DALE E COLEMAN

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

USACE, KANSAS CITY +

FEDERAL BLDG, CT-C

601 E 12TH ST RM 647

KANSAS CITY MO 64106-2896

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

816-389-2029/2030FAX:

TEL: 816-389-3812 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$39,500,000

NAICS:

237130

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF58

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912DQ20R1073

Section A - Solicitation/Contract Form

SYNOPSIS / SOLICITATION:

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in subpart

12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation, proposals are being requested and a written solicitation will not be issued.

The solicitation number for this acquisition is W912DQ20R1073 and it is being issued as a Request for Quotes

(RFQ).

The solicitation documents and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-84.

This RFQ shall be Full and Open Competition and the associated North American Industry Classification system (NAICS) code is 237130 Power and Communication Line Installation and the business size standard is $36,500,000.00.

Far 52.212-1, Instructions to Offerors- Commercial does apply to this acquisition with no addenda to the provision and is located in Section L of this combined synopsis/solicitation.

Far 52.212-2, Evaluation - Commercial Edited does apply to this acquisition with no addenda to the provision and is located in Section M of this combined synopsis/solicitation.

FAR 52.212-3, Offeror Representations and Certifications -- Commercial Items, does apply to this acquisition with no addenda to the provision, and is located in Section K of this combined synopsis/solicitation.

FAR 52.212-4, Contract Terms and Conditions - Commercial Items, does apply to this acquisition with no addenda to the provision. These specific clauses required are located in Section I of this combined synopsis/solicitation.

FAR 52.212-5, Contract Terms and Conditions - Required to Implement Statutes or Executive Orders- Commercial Items, applies to this acquisition. These specific clauses required are located in Section I of this combined synopsis/solicitation.

System for Award Management

OFFEROR MUST BE REGISTERED IN THE SYSTEM FOR AWARD MANAGEMENT (SAMs) OFFEROR AND QUOTER ARE REQUIRED TO BE REGISTERED IN SAMs AT THE TIME AN OFFER OR QUOTATION IS SUBMITTED PER FAR 4.1102(a) AND FAR 4.1103(a)(1) OR THE CONTRACT

OFFICER MAY PROCEED WITH AWARD TO THE NEXT SUCCESSFUL CONTRACTOR.

In accordance with FAR 52.212-1(k): By submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance and through final payment of any contract resulting from this solicitation. If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror. Offerors may obtain information on registration and annual confirmation requirements via the SAM database accessed through https://sam.gov/portal/SAM/#1 . It is highly encouraged that all prospective Offeror’s start the SAM’s registration process as soon as possible.

If you were not previously registered, please go to https://www.sam.gov. Instructions for new registration are also located at the following link https://www.sam.gov/sam/transcript/Quick_Guide_for_Contract_Registrations_v1.7.pdf to register.

If you have questions about Government procurements in general or need assistance in the preparation of your proposal, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical

Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to http://www.aptac-us.org/sam-registration/ THIS A FREE SERVICE BY A NON PROFIT PAID FOR BY THE US GOVERNMENT

SAMs UPDATE:

Alleged Fraudulent Activity in SAM GSA has taken action to address alleged fraudulent activity in the System for Award Management (SAM). The measures GSA already put in place to help prevent improper activity in SAM include masking specific data elements in the entity registration even for authorized entity users; requiring “parent” approval of new registrations for their “child” entities; and requiring the formal appointment of the Entity Administrator by original, signed notarized letter.

Additional enhanced controls have been deployed. These controls include implementing multi-factor authentication using login.gov and notifying Entity Administrators when there is a change in the entity’s bank account information.

NOTARIZED LETTER PROCESS CHANGES

How has the notarized letter review process changed?

All non-Federal entities who create or update their registration in SAM.gov will no longer need to have an approved Entity Administrator notarized letter on file before their registration is activated.

This applies to you if your SAM.gov Purpose of Registration is either Federal Assistance or All Awards.

Check SAM.gov to find your Purpose of Registration.

All non-Federal entities still must mail the original, signed copy of the notarized letter to the Federal Service Desk.

Where can I find the notarized letter templates?

Read the instructions for domestic entities or instructions for international entities posted at the Federal Service Desk.

Where do I send the notarized letter?

You must mail the original, notarized letter to:

FEDERAL SERVICE DESK

ATTN: SAM.GOV REGISTRATION PROCESSING

460 INDUSTRIAL BLVD

LONDON, KY 40741-7285

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 Job Kanopolis Project Office, Kimble Point

FFP

Electrical Upgrade - The contractor shall provide all personnel, providing plant, equipment, tools, labor, supervision, incidental materials, quality control, environmental protection, and meeting safe requirements necessary to provide electrical panel upgrades as defined in this Performance Work Statement (PWS) dated 15 June 2020.

FOB: Destination

PSC CD: S112

NET AMT

0002 Job Kanopolis Project Office, Cottonwood

FFP

West RV Panel replacement (22) - The contractor shall provide all personnel, providing plant, equipment, tools, labor, supervision, incidental materials, quality control, environmental protection, and meeting safe requirements necessary to provide electrical panel upgrades as defined in this Performance Work Statement (PWS) dated 15 June 2020.

0003 Job Wilson Project Office, Lucas Park (19)

FFP

and Minooka Park (12) RV panel replacement - The contractor shall provide all personnel, providing plant, equipment, tools, labor, supervision, incidental materials, quality control, environmental protection, and meeting safe requirements necessary to provide electrical panel upgrades as defined in this Performance Work Statement (PWS) dated 15 June 2020.

0004 Job OPTION Wilson Project Office. Replace 7

FFP

existing RV Panels in Minooka Park. - The contractor shall provide all personnel, providing plant, equipment, tools, labor, supervision, incidental materials, quality control, environmental protection, and meeting safe requirements necessary to provide electrical panel upgrades as defined in this Performance Work Statement (PWS) dated 15 June 2020.

0005 Job OPTION Wilson Project Office. Replace 11

FFP

existing RV Panels in Minooka Park. - The contractor shall provide all personnel, providing plant, equipment, tools, labor, supervision, incidental materials, quality control, environmental protection, and meeting safe requirements necessary to provide electrical panel upgrades as defined in this Performance Work Statement (PWS) dated 15 June 2020.

Section C - Descriptions and Specifications

PERFORMANCE WORK STATEMENT

Performance Work Statement 15 June 2020

DESCRIPTION OF WORK AND GENERAL REQUIREMENTS

1. DESCRIPTION OF WORK:

1.1. Requirements:

The Contractor shall install electrical service to the Kimble Point campsite loop and replace 22 RV panels (campsite pedestals) in the Cottonwood Loop of Venango Park, Kanopolis Lake, Marquette, KS. In addition, the Contractor will replace 51 RV panels (campsite pedestals) in the Minooka and Lucas Park areas of Wilson Lake, Sylvan Grove, KS. Unless otherwise noted, Contractor shall provide all materials, equipment, and labor necessary to meet the requirements of the scope of work.

1.2. Location: Kanopolis Project Office

U.S. Army Corps of Engineers 105 Riverside Drive Marquette, KS 67464 On-site POC: Dan Hays Phone: 816-389-3093

Wilson Project Office U.S. Army Corps of Engineers 4860 Outlet Boulevard Sylvan Grove, KS 67481 On-site POC: Nolan Fisher Phone: 816-389-3034

1.3. Work Hours: Negotiable with Contracting Officer Representative (COR) or Operations Project Manager (OPM). Work will not be allowed on weekends unless approved in advance by the PM.

2. PRINCIPAL FEATURES: The work to be performed will include, but not be limited to, the following principal features:

2.1. General Scope:

2.1.1 Kanopolis Lake, Venango Park, Kimble Point campsite electrical service installation.

1. Kimble Point electrical utility installation. Refer to Appendices 1, 2 and 3 for worksite layout, Utility provider (REC) requirements and Earth mounted electrical post installation requirements. The installation shall meet the current National Fire Protection Association (NFPA) codes including NFPA 70 and the National Electric Code (NEC). Electrical Service Rack: Constructed and installed in accordance with Appendice 3, Ark Valley Rural Electric Company (AVEC) requirements. Excavate trench, 2’ deep and 4” from panel to AVEC transformer located 3’-10’ from transformer. Install rack ground wire and rod.

2. Electrical Service Panel and Disconnect: Provide spacing for 16x22’ AVEC provided and installed meter socket. Provide and install Eton brand ECC22R Breaker, Enclosure 225A (or equivalent) with locking access cover and Eton brand CH8B200RF 200A, 120/240V, 35 kAICl load center (or equivalent) with locking access cover. Galvanized rigid conduit (GRC) required for above applications.

3. Conductor: Copper conductors only. 250, 250 & 3/0 Triplex underground distribution cable (or equivalent based upon NEC requirements). Fill/tamp anchor hole with native soil materials. Road Crossing; Subgrade boring or asphalt saw cut/excavation. Conducted sleeved in Schedule 40 PVC conduit Excavated road crossings will be filled with natural materials, compacted and returned adjacent road surface grade.

4. Recreation Vehicle (RV) Panel (post pedestals): Provide and install Seven (7) RV panels. MilBank Model U5200 50/30/20A per Appendice 3. See Appendice 1 for installation locations. Panel locations noted on Appendice 1 are approximate and for illustrative purposes only. Actual panel locations will be field flagged prior to the commencement of work. Panels will be installed with panel facing towards the campsite.

5. Panel bollards: Install one (1) protective bollard on the entrance side of each RV panel. Bollard will be 2” ID galvanized pipe with screw type cap. 3’ in length, 1’ buried, and spaced 8” from panel.

6. Picnic Shelter Lighting: Install 2 ceiling mounted light fixtures, Lithonia OLVTCM LED Vaportight with weather proof on/off switch. Install duplex GFCI receptacle within picnic shelter. Light and receptacle mounting locations to be marked in field.

Copper conductor, sized in accordance with NEC will be installed in conduit from adjacent campsite RV panel

7. Utility Supplier Coordination: Contractor shall coordinate the electrical service changes with the utility (Ark Valley Rural Electric Company, South Hutchinson, KS.

POC: Ryan Maehs, 620-662-6661.

2.1.2 Kanopolis Lake, Venango Park, Cottonwood campsite RV panel replacement.

1. Replace RV Panels: Remove (22) Twenty Two, RV panels (30/20A) in the Cottonwood Loop of Venango Park. 23 panels are located in Cottonwood Loop. The panel at Campsite #8W will NOT require replacement. Replacement panels will be Midway brand, 70A, Catalog # U041GP6. The Government will provide (10) Ten panels to be picked up at the Kanopolis Project Office, 0730-1600, M-F. The remaining 12 panels will be provided by the Contractor. All replacement panels will be installed in accordance with Appendice 3. Panels will face towards the campsite.

2. Panel bollards: Install one (1) protective bollard on the entrance side of each RV panel. Bollard will be 2” ID galvanized pipe, thick walled (nlt 1/8” wall) with screw type cap. 4’ total length (2’ buried) and spaced 6”- 8” from panel and offset 3”-4” to avoid panel damage should bollard be struck.

3. Post mounted security lights: Existing RV panels at Campsites 1, 3, 12 and 20 serve adjacent pole mounted security lights and possess photocells. Contractor will remove these components and reinstall on replacement panel with assurance of operability.

4. Government will be provided 3 business day notice prior to commencement of work to allow sufficient time to salvage existing panel components. Contractor will remove and dispose of existing panels off site.

5. Work will be conducted between 16 September and 15 November 2020.

2.1.3 Wilson Lake, Lucas and Minooka Park, RV panel replacement.

1. Replace RV Panels: Replace RV panels in Lucas and Minooka Parks as listed below.

All replacement panels will be installed in accordance with Appendice 3 and will face away from the campsite. Government will be provided 7 business day notice prior to commencement of work to allow sufficient time to salvage existing panel components.

Contractor will remove and complete offsite disposal of existing panels. Work will be conducted between 16 September and 15 November 2020.

2. Lucas Park: Replace Nineteen (19) existing RV panels at Campsites 13-17, 22, 24-29, 60, 63, 65-69 with Contractor provided Midwest 30/20A, #U041CP6010.

3. Minooka Park: Replace Eight (8) existing RV panels at Campsites B2-B5 and F9, F11, F13, F15 with Contractor provided Midwest 50/30/20A, #UO75CP6010.

4. Minooka Park: Replace Four (4) existing RV panels at Campsites D4, D5, D7 and D09 with Contractor provided Midwest 30/20A, #UO41CP6010.

5. Minooka Park (Option): Replace Four (4) existing RV panels at Campsites F8, F10, F12 and F14 with Contractor provided Midwest 50/30/20A, #U075CP6010 AND Three (3) existing RV panels at Campsites C1, C2 and C4 with Contractor provided Midwest

30/20A, #U041CP6010.

6. Minooka Park (Option): Replace Eleven (11) existing RV panels at Campsites E1-E4, E6, E8, E9, E12, E27, E31 and E32 with Contractor provided Midwest 50/30A, #U075CP6010.

2.2 Location/Quantity:

A. Kimble Point, Venango Park, Kanopolis Lake. One (1) install (to include service rack, primary service components, trenching, conductor placement and installation of 7 RV panels. Kanopolis Project Office Maintenance Compound, 105 Riverside Drive, Marquette, KS 67464.

B. Cottonwood Loop, Venango Park, Kanopolis Lake. Replace Twenty Two (22) RV panels. 10 government furnished and 12 Contractor provided.

C. Lucas and Minooka Parks, Wilson Lake. Replace Fifty One (51) (Base and options) RV panels with replacement panels provided by Contractor. Wilson Project Office, 4860 Outlet Boulevard, Sylvan Grove, KS 67481.

2.4 Submittals:

The following shall be submitted for Government Approval:

1. A general overall work plan with schematic to meet the requirements laid forth in the Section 01 11 00.

2. One line diagram with electrical equipment information, conductor and conduit sizes and lengths.

3. Product data sheets for each product proposed to be used for Government review.

4. Proposed work schedule.

3. SEQUENCE OF WORK:

Contractor shall commence within 30 days after Notice to Proceed has been issued. All work must be completed within 30 days after notice to proceed and the following limitations shall pertain:

Contractor shall coordinate scheduling changes with COR. Unavoidable power interruptions shall be coordinated with COR with no less than 48 hours notice.

4. FIELD MEASUREMENTS: The Contractor shall verify all measurements at the project site and shall be responsible for all dimensions, fittings, and the proper installation of all materials and equipment specified.

5. PERMITS: The Contractor shall be responsible for obtaining any required permits.

5.1. Hot Work Permit:

The Contractor shall be liable for any fire loss to Government property attributable to negligence on the part of the Contractor, including failure to comply with fire prevention measures prescribed by terms of this contract.

6. SAFETY REQUIRMENTS:

6.1. Protection from Hazards: During progress of work, the Contractor shall protect all personnel, whether Government or civilian, from any and all safety hazards caused by the construction operations.

6.2. Traffic Control: Contractor shall provide all temporary signs and markers as necessary to maintain safety in the worksite. All signs shall conform to the latest edition of the Manual of Uniform Control Devices (MUTCD).

6.3. U.S. ARMY CORPS OF ENGINEERS SAFETY AND HEALTH REQUIREMENTS

MANUAL, EM 385-1-1 (2014)

EM 385-1-1 and its changes are available at http://www.hq.usace.army.mil (at the HQ homepage, select Safety and Occupational Health). Select the appropriate manual. The Contractor shall be responsible for complying with the current edition and all changes posted on the web as of the effective date of this solicitation.

2014 Version:

http://www.usace.army.mil/SafetyandOccupationalHealth/EM38511,2008BeingRevised.aspx

7. SPECIAL REQUIREMENTS:

8. SECURITY:

8.1. The Contractor shall not be on site without prior notification to the Corps of Engineers COR or otherwise designated person(s).

8.2. Contractor personnel shall have valid civilian ID's and Contractor vehicles shall have a valid registration.

8.4 ANTITERRORISM/OPERATION SECURITY REQUIREMENTS

All contractor and all associated sub‐contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.

All contractor and all associated sub‐contractors employees will receive a CORPS Watch information paper (provided by the authorized government representative) and provide a written acknowledgement to the COR, no later than 30 calendar days after contract start date or effective date of incorporation of this requirement into the contract.

The Contractor must pre‐screen candidates using the E‐verify Program (http://www.dhs.gov/E‐ Verify) website to meet the established employment eligibility requirements. The vendor must ensure that the candidate has two valid forms of government issued identification to ensure the correct information is entered into the E‐verify system. An initial list of verified/eligible candidates must be provided to the COR no later than 3 business days after the initial contract award.

Per the E-Verify Website the following exemptions apply:

Employers whose contracts are exempt from the E-Verify federal contractor rule are not required to enroll in E-Verify. A contract is considered exempt if any one of the following applies: (1) It is for fewer than 120 days. (2) It is valued at less than $150,000, the simplified acquisition threshold (Source: http://www.uscis.gov/e-verify/federal-contractors/exemptions-and-exceptions).

All contract employees, including subcontractor employees who are not in possession of the appropriate security clearance, will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas.

9. APPLICABLE PUBLICATIONS: The publications referenced herein shall be the most recent at the time of solicitation.

10. WORKSITE HOUSEKEEPING:

10.1. The Contractor shall remove all trash and disposal material from the worksite before the end of each day; to the extent it is consistent with standard construction practices on Government work sites. The Contractor shall take all possible precautions to maintain the work site, at all times, in a condition that will prevent damage or injury to person or property, Government or otherwise. The above precautions shall include protection from weather conditions. The Contractor shall be responsible for all damages caused by the negligent acts or omissions of his employees, sub-contractors, or agents during Contract performance.

11. RESPONSIBLITY FOR DAMAGE

11.1. Damage to Personal Property: The Contractor shall be solely responsible for all damage to Government and occupant personal property caused by the Contractors' personnel, subcontractors, his agents, or by the performance of his work.

11.2. Damage by Negligence: Damage resulting in gas leaks, electrical outages, loss of heat during cold weather, water leaks, unsecured facilities, weather damage, or oil/hazardous waste spills shall be responded to by the Contractor within 2 hours and repaired within one workday. If the Contractor fails to comply with these requirements, the Government reserves the right to repair the damage and charge the cost to the Contractor. Contractor shall protect all areas through which he will be transporting demolition debris or construction materials. Any damaged turf, sidewalks, roads, vegetation, site amenities, etc, shall be replaced or repaired by the Contractor prior to final Contract closeout.

12. DISPOSAL OF MATERIALS: All materials removed and not reused or designated as salvage material in this project shall become the property of the Contractor, unless otherwise specified, and shall be the Contractor's responsibility for lawful disposal.

12.1. All other wastes generated during Contractor operations shall be disposed of by the Contractor at his/her expense.

- END OF SECTION -

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 180 dys. ADC USACE, KANSAS CITY +

DANIEL HAYS

KANOPOLIS LAKE PROJECT OFFICE 105

RIVERSIDE

MARQUETTE KS 67464

8163893093

966219

0002 180 dys. ADC (SAME AS PREVIOUS LOCATION)

966219

0003 180 dys. ADC USACE, KANSAS CITY +

DANIEL HAYS

WILSON LAKE PROJECT 4860 OUTLET

BLVD

SYLVAN GROVE KS 67481

816-389-3093

966214

0004 POP 16-SEP-2020 TO

15-NOV-2020

N/A (SAME AS PREVIOUS LOCATION)

0005 POP 16-SEP-2020 TO

15-NOV-2020

N/A (SAME AS PREVIOUS LOCATION)

Section H - Special Contract Requirements

AT-OPSEC:

ANTITERRORISM/OPERATION SECURITY REQUIREMENTS

All contractor and all associated sub-contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation/facility access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements (FAR clause 52.204-9, Personal Identity Verification of Contractor Personnel) as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any installation or facility change, the Government may require changes in contractor security matters or processes. All contractor and all associated sub‐contractors employees will receive a CORPS Watch information paper (provided by the authorized government representative) and provide a written acknowledgement to the COR, no later than 30 calendar days after contract start date or effective date of incorporation of this requirement into the contract.

The Contractor must pre-screen Candidates using the E-verify Program (http://www.uscis.gov/e-verify ) website to meet the established employment eligibility requirements. The Vendor must ensure that the Candidate has two valid forms of Government issued identification prior to enrollment to ensure the correct information is entered into the E-verify system. An initial list of verified/eligible Candidates must be provided to the COR no later than 3 business days after the initial contract award."

Per the E-Verify Website the following exemptions apply:

Employers whose contracts are exempt from the E-Verify federal contractor rule are not required to enroll in E- Verify. A contract is considered exempt if any one of the following applies: (1) It is for fewer than 120 days. (2) It is valued at less than $250,000, the simplified acquisition threshold (Source: http://www.uscis.gov/e-verify/federal-contractors/exemptions-and-exceptions).

All contract employees, including subcontractor employees who are not in possession of the appropriate security clearance, will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas.

(End AT-OPSEC)

WAGE RATES

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5753 Daniel W. Simms Division of | Revision No.: 13 Director Wage Determinations| Date Of Last Revision: 06/03/2020 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2020. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Kansas

Area: Kansas Counties of Ellsworth Jewell Lincoln Marion McPherson Mitchell Reno Rice

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 13.45 01012 - Accounting Clerk II 15.89 01013 - Accounting Clerk III 17.75 01020 - Administrative Assistant 20.89 01035 - Court Reporter 27.49 01041 - Customer Service Representative I 11.73 01042 - Customer Service Representative II 13.18 01043 - Customer Service Representative III 14.39 01051 - Data Entry Operator I 13.80 01052 - Data Entry Operator II 15.07 01060 - Dispatcher Motor Vehicle 17.43 01070 - Document Preparation Clerk 14.47 01090 - Duplicating Machine Operator 14.47 01111 - General Clerk I 13.02 01112 - General Clerk II 14.21 01113 - General Clerk III 15.95 01120 - Housing Referral Assistant 18.91 01141 - Messenger Courier 12.89 01191 - Order Clerk I 14.68 01192 - Order Clerk II 16.02 01261 - Personnel Assistant (Employment) I 15.83 01262 - Personnel Assistant (Employment) II 17.70 01263 - Personnel Assistant (Employment) III 19.73 01270 - Production Control Clerk 22.29 01290 - Rental Clerk 15.98 01300 - Scheduler Maintenance 15.17 01311 - Secretary I 15.17 01312 - Secretary II 16.97 01313 - Secretary III 18.91 01320 - Service Order Dispatcher 15.58 01410 - Supply Technician 20.89 01420 - Survey Worker 14.71 01460 - Switchboard Operator/Receptionist 12.71 01531 - Travel Clerk I 13.06 01532 - Travel Clerk II 13.76 01533 - Travel Clerk III 14.82 01611 - Word Processor I 13.53 01612 - Word Processor II 15.19 01613 - Word Processor III 16.99

05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 20.95 05010 - Automotive Electrician 19.91 05040 - Automotive Glass Installer 19.06 05070 - Automotive Worker 19.06 05110 - Mobile Equipment Servicer 16.98 05130 - Motor Equipment Metal Mechanic 20.95 05160 - Motor Equipment Metal Worker 19.06 05190 - Motor Vehicle Mechanic 21.18 05220 - Motor Vehicle Mechanic Helper 15.92 05250 - Motor Vehicle Upholstery Worker 18.02 05280 - Motor Vehicle Wrecker 19.06 05310 - Painter Automotive 19.91 05340 - Radiator Repair Specialist 19.06 05370 - Tire Repairer 16.37 05400 - Transmission Repair Specialist 20.95 07000 - Food Preparation And Service Occupations 07010 - Baker 11.71 07041 - Cook I 11.23 07042 - Cook II 12.83 07070 - Dishwasher 8.95 07130 - Food Service Worker 10.31 07210 - Meat Cutter 13.67 07260 - Waiter/Waitress 9.02 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 19.62 09040 - Furniture Handler 13.76 09080 - Furniture Refinisher 19.62 09090 - Furniture Refinisher Helper 15.66 09110 - Furniture Repairer Minor 17.54 09130 - Upholsterer 19.62 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 12.11 11060 - Elevator Operator 11.92 11090 - Gardener 16.52 11122 - Housekeeping Aide 11.92 11150 - Janitor 11.92 11210 - Laborer Grounds Maintenance 12.91 11240 - Maid or Houseman 10.49 11260 - Pruner 11.72 11270 - Tractor Operator 15.31 11330 - Trail Maintenance Worker 12.91 11360 - Window Cleaner 13.13 12000 - Health Occupations 12010 - Ambulance Driver 16.19 12011 - Breath Alcohol Technician 17.80 12012 - Certified Occupational Therapist Assistant 28.64 12015 - Certified Physical Therapist Assistant 26.96 12020 - Dental Assistant 17.62 12025 - Dental Hygienist 34.53 12030 - EKG Technician 24.79 12035 - Electroneurodiagnostic Technologist 24.79 12040 - Emergency Medical Technician 16.19 12071 - Licensed Practical Nurse I 15.91 12072 - Licensed Practical Nurse II 17.80 12073 - Licensed Practical Nurse III 19.84 12100 - Medical Assistant 13.82 12130 - Medical Laboratory Technician 22.51 12160 - Medical Record Clerk 15.23 12190 - Medical Record Technician 17.03 12195 - Medical Transcriptionist 15.89 12210 - Nuclear Medicine Technologist 36.66

12221 - Nursing Assistant I 11.36 12222 - Nursing Assistant II 12.77 12223 - Nursing Assistant III 13.94 12224 - Nursing Assistant IV 15.65 12235 - Optical Dispenser 15.10 12236 - Optical Technician 15.91 12250 - Pharmacy Technician 15.80 12280 - Phlebotomist 13.37 12305 - Radiologic Technologist 24.62 12311 - Registered Nurse I 22.50 12312 - Registered Nurse II 27.53 12313 - Registered Nurse II Specialist 27.53 12314 - Registered Nurse III 33.30 12315 - Registered Nurse III Anesthetist 33.30 12316 - Registered Nurse IV 39.92 12317 - Scheduler (Drug and Alcohol Testing) 22.04 12320 - Substance Abuse Treatment Counselor 21.97 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 18.36 13012 - Exhibits Specialist II 22.75 13013 - Exhibits Specialist III 27.82 13041 - Illustrator I 18.36 13042 - Illustrator II 22.75 13043 - Illustrator III 27.82 13047 - Librarian 25.19 13050 - Library Aide/Clerk 12.63 13054 - Library Information Technology Systems 21.60 Administrator 13058 - Library Technician 15.98 13061 - Media Specialist I 16.41 13062 - Media Specialist II 18.36 13063 - Media Specialist III 20.47 13071 - Photographer I 16.41 13072 - Photographer II 18.36 13073 - Photographer III 22.75 13074 - Photographer IV 27.82 13075 - Photographer V 33.66 13090 - Technical Order Library Clerk 15.50 13110 - Video Teleconference Technician 16.41 14000 - Information Technology Occupations 14041 - Computer Operator I 17.92 14042 - Computer Operator II 18.33 14043 - Computer Operator III 21.46 14044 - Computer Operator IV 23.01 14045 - Computer Operator V 25.46 14071 - Computer Programmer I (see 1) 22.75 14072 - Computer Programmer II (see 1) 25.78 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 17.92 14160 - Personal Computer Support Technician 24.04 14170 - System Support Specialist 25.81 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 29.53 15020 - Aircrew Training Devices Instructor (Rated) 35.72 15030 - Air Crew Training Devices Instructor (Pilot) 42.82 15050 - Computer Based Training Specialist / Instructor 29.53 15060 - Educational Technologist 26.17 15070 - Flight Instructor (Pilot) 42.82

15080 - Graphic Artist 21.75 15085 - Maintenance Test Pilot Fixed Jet/Prop 42.82 15086 - Maintenance Test Pilot Rotary Wing 42.82 15088 - Non-Maintenance Test/Co-Pilot 42.82 15090 - Technical Instructor 18.76 15095 - Technical Instructor/Course Developer 22.94 15110 - Test Proctor 15.14 15120 - Tutor 15.14 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 9.75 16030 - Counter Attendant 9.75 16040 - Dry Cleaner 12.32 16070 - Finisher Flatwork Machine 9.75 16090 - Presser Hand 9.75 16110 - Presser Machine Drycleaning 9.75 16130 - Presser Machine Shirts 9.75 16160 - Presser Machine Wearing Apparel Laundry 9.75 16190 - Sewing Machine Operator 13.10 16220 - Tailor 13.88 16250 - Washer Machine 10.60 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 22.95 19040 - Tool And Die Maker 29.95 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 18.99 21030 - Material Coordinator 22.29 21040 - Material Expediter 22.29 21050 - Material Handling Laborer 15.06 21071 - Order Filler 12.00 21080 - Production Line Worker (Food Processing) 18.99 21110 - Shipping Packer 16.69 21130 - Shipping/Receiving Clerk 16.69 21140 - Store Worker I 14.77 21150 - Stock Clerk 19.10 21210 - Tools And Parts Attendant 18.99 21410 - Warehouse Specialist 18.99 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 29.78 23019 - Aircraft Logs and Records Technician 24.24 23021 - Aircraft Mechanic I 28.49 23022 - Aircraft Mechanic II 29.78 23023 - Aircraft Mechanic III 30.93 23040 - Aircraft Mechanic Helper 21.06 23050 - Aircraft Painter 27.22 23060 - Aircraft Servicer 24.24 23070 - Aircraft Survival Flight Equipment Technician 27.22 23080 - Aircraft Worker 25.77 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 25.77 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 28.49

II

23110 - Appliance Mechanic 21.79 23120 - Bicycle Repairer 17.95 23125 - Cable Splicer 35.41 23130 - Carpenter Maintenance 21.09 23140 - Carpet Layer 20.40 23160 - Electrician Maintenance 25.01 23181 - Electronics Technician Maintenance I 26.10 23182 - Electronics Technician Maintenance II 27.64 23183 - Electronics Technician Maintenance III 30.71 23260 - Fabric Worker 19.27 23290 - Fire Alarm System Mechanic 22.55

23310 - Fire Extinguisher Repairer 17.95 23311 - Fuel Distribution System Mechanic 27.29 23312 - Fuel Distribution System Operator 21.67 23370 - General Maintenance Worker 18.69 23380 - Ground Support Equipment Mechanic 28.49 23381 - Ground Support Equipment Servicer 24.24 23382 - Ground Support Equipment Worker 25.77 23391 - Gunsmith I 17.95 23392 - Gunsmith II 20.51 23393 - Gunsmith III 22.76 23410 - Heating Ventilation And Air-Conditioning 22.64 Mechanic 23411 - Heating Ventilation And Air Contidioning 23.68 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 21.77 23440 - Heavy Equipment Operator 20.58 23460 - Instrument Mechanic 22.76 23465 - Laboratory/Shelter Mechanic 21.71 23470 - Laborer 15.06 23510 - Locksmith 21.71 23530 - Machinery Maintenance Mechanic 22.58 23550 - Machinist Maintenance 20.58 23580 - Maintenance Trades Helper 15.77 23591 - Metrology Technician I 22.76 23592 - Metrology Technician II 23.81 23593 - Metrology Technician III 24.76 23640 - Millwright 22.55 23710 - Office Appliance Repairer 21.55 23760 - Painter Maintenance 18.96 23790 - Pipefitter Maintenance 22.34 23810 - Plumber Maintenance 21.25 23820 - Pneudraulic Systems Mechanic 22.76 23850 - Rigger 22.76 23870 - Scale Mechanic 20.51 23890 - Sheet-Metal Worker Maintenance 21.95 23910 - Small Engine Mechanic 20.40 23931 - Telecommunications Mechanic I 27.17 23932 - Telecommunications Mechanic II 28.41 23950 - Telephone Lineman 28.26 23960 - Welder Combination Maintenance 19.95 23965 - Well Driller 24.81 23970 - Woodcraft Worker 22.76 23980 - Woodworker 17.95 24000 - Personal Needs Occupations 24550 - Case Manager 16.02 24570 - Child Care Attendant 10.20 24580 - Child Care Center Clerk 12.75 24610 - Chore Aide 10.34 24620 - Family Readiness And Support Services 16.02 Coordinator 24630 - Homemaker 16.25 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 23.45 25040 - Sewage Plant Operator 23.96 25070 - Stationary Engineer 25.22 25190 - Ventilation Equipment Tender 17.14 25210 - Water Treatment Plant Operator 20.86 27000 - Protective Service Occupations 27004 - Alarm Monitor 16.74 27007 - Baggage Inspector 14.15 27008 - Corrections Officer 16.89 27010 - Court Security Officer 17.24

27030 - Detection Dog Handler 17.18 27040 - Detention Officer 16.89 27070 - Firefighter 17.85 27101 - Guard I 14.15 27102 - Guard II 17.18 27131 - Police Officer I 19.19 27132 - Police Officer II 21.32 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 11.83 28042 - Carnival Equipment Repairer 12.77 28043 - Carnival Worker 9.29 28210 - Gate Attendant/Gate Tender 14.32 28310 - Lifeguard 10.82 28350 - Park Attendant (Aide) 16.01 28510 - Recreation Aide/Health Facility Attendant 11.69 28515 - Recreation Specialist 19.85 28630 - Sports Official 12.76 28690 - Swimming Pool Operator 15.81 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 24.15 29020 - Hatch Tender 24.15 29030 - Line Handler 24.15 29041 - Stevedore I 22.73 29042 - Stevedore II 25.29 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 40.29 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 27.78 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 30.60 30021 - Archeological Technician I 17.30 30022 - Archeological Technician II 18.90 30023 - Archeological Technician III 23.42 30030 - Cartographic Technician 23.42 30040 - Civil Engineering Technician 19.93 30051 - Cryogenic Technician I 25.94 30052 - Cryogenic Technician II 28.64 30061 - Drafter/CAD Operator I 16.90 30062 - Drafter/CAD Operator II 18.90 30063 - Drafter/CAD Operator III 21.07 30064 - Drafter/CAD Operator IV 25.94 30081 - Engineering Technician I 16.25 30082 - Engineering Technician II 18.25 30083 - Engineering Technician III 22.54 30084 - Engineering Technician IV 24.66 30085 - Engineering Technician V 33.08 30086 - Engineering Technician VI 40.00 30090 - Environmental Technician 24.67 30095 - Evidence Control Specialist 23.42 30210 - Laboratory Technician 22.57 30221 - Latent Fingerprint Technician I 25.94 30222 - Latent Fingerprint Technician II 28.64 30240 - Mathematical Technician 23.48 30361 - Paralegal/Legal Assistant I 18.63 30362 - Paralegal/Legal Assistant II 23.48 30363 - Paralegal/Legal Assistant III 28.72 30364 - Paralegal/Legal Assistant IV 34.16 30375 - Petroleum Supply Specialist 28.64 30390 - Photo-Optics Technician 23.48 30395 - Radiation Control Technician 28.64 30461 - Technical Writer I 21.97 30462 - Technical Writer II 26.88 30463 - Technical Writer III 32.52 30491 - Unexploded Ordnance (UXO) Technician I 25.61

30492 - Unexploded Ordnance (UXO) Technician II 30.98 30493 - Unexploded Ordnance (UXO) Technician III 37.14 30494 - Unexploded (UXO) Safety Escort 25.61 30495 - Unexploded (UXO) Sweep Personnel 25.61 30501 - Weather Forecaster I 25.94 30502 - Weather Forecaster II 31.54 30620 - Weather Observer Combined Upper Air Or (see 2) 21.07 Surface Programs 30621 - Weather Observer Senior (see 2) 23.42 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 30.98 31020 - Bus Aide 10.85 31030 - Bus Driver 13.88 31043 - Driver Courier 13.30 31260 - Parking and Lot Attendant 12.04 31290 - Shuttle Bus Driver 14.34 31310 - Taxi Driver 12.63 31361 - Truckdriver Light 14.34 31362 - Truckdriver Medium 15.40 31363 - Truckdriver Heavy 19.37 31364 - Truckdriver Tractor-Trailer 19.37 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 15.11 99030 - Cashier 9.73 99050 - Desk Clerk 9.57 99095 - Embalmer 30.15 99130 - Flight Follower 25.61 99251 - Laboratory Animal Caretaker I 13.77 99252 - Laboratory Animal Caretaker II 14.86 99260 - Marketing Analyst 24.49 99310 - Mortician 30.15 99410 - Pest Controller 20.55 99510 - Photofinishing Worker 15.51 99710 - Recycling Laborer 15.56 99711 - Recycling Specialist 18.44 99730 - Refuse Collector 14.12 99810 - Sales Clerk 11.90 99820 - School Crossing Guard 11.60 99830 - Survey Party Chief 22.40 99831 - Surveying Aide 13.82 99832 - Surveying Technician 18.95 99840 - Vending Machine Attendant 17.71 99841 - Vending Machine Repairer 21.04 99842 - Vending Machine Repairer Helper 17.71

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.54 per hour up to 40 hours per week or $181.60 per week or $786.93 per month

HEALTH & WELFARE EO 13706: $4.22 per hour up to 40 hours per week or $168.80 per week or $731.47 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 10 years and 4 after 20 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day Martin Luther King Jr's Birthday Washington's Birthday Good Friday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.)

(See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you…