A-WSM_RFI_Z3-0001.pdf

Army-Watercraft Sustainment Maintenance (A-WSM) ZONE 3 - Northeast & Southeast Asia, and Central Pacific Coast

Request for Information (RFI) Z3-0001 06 September 2018

The purpose of this Request for Information (RFI) is to solicit industry feedback for future Army Watercraft sustainment level requirements on behalf of the United States Army Tank-Automotive and Armaments Command (TACOM), Watercraft Inspection Branch (WIB).

The Army Contracting Command-Warren (ACC-WRN) is conducting market research for the Army-Watercraft Sustainment Maintenance (A-WSM) Program. For introduction and background information of the A-WSM program, please see Announcements 0001- 0003 on Federal Business Opportunities (FBO) under the AWSM Program.

This RFI applies to Zone 3 (Z3) only. The area of focus for RFI Z3-0001 is Full and Open Competition in Northeast & Southeast Asia, and Central Pacific Coast Outside the Continental United States (OCONUS).

The vessel classes that require sustainment maintenance in the Z3 CONUS Area of Responsibility (AOR) include the following: Logistic Support Vessel (LSV), Landing Craft Utility (LCU), Small Tug (ST), Large Tug (LT), Modular Causeway System (MCS) (Causeway Ferry (CF), Side Loadable Warping Tug (SLWT), (Roll-On/Roll-Off, Discharge Facility (RRDT), Modular Warping Tug (MWT)), Landing Craft Mechanized (LCM), and pontoons.

Desired Services:

OCCM Dry Dock Services Scheduled Maintenance & Repair On-Condition Cyclic Maintenance (OCCM) Modernization Efforts Unscheduled Maintenance & Repair Emergency Repairs

OCCM Dry Dock Services: In order to provide services in this category, the Contractor must have or obtain a Master Agreement for Repair and Alteration of Vessels (MARAV) in accordance with DFARS Subpart 217-71.

Examples of OCCM Dry Dock Services:

OCCM Dry Dock Services:

• Scheduled, unscheduled, emergency repairs or vessel/system modifications that require dry docking or heavy lifting capability found in a shipyard appropriate for the class of vessel being repaired.

• Cleaning and painting of underwater hull, topside, and interior surfaces, cleaning and painting of tanks, voids and cofferdams.

• Inspections and tests required to complete ABS load line and OSHA quinquennial load test requirements.

• Removal, inspection, repair, reinstallation of propellers, propeller shafts, rudders, bow and stern ramps, and other repairs requiring vessel dry docking.

• Replacement or repairs of vessel shell plating, bulkheads, framing, tank structures.

• Associated vessel systems repairs/replacements in conjunction with work listed above.

Z3 Strategy:

Shipyard repairs require the offeror to obtain a MARAV in accordance with DFARS Subpart 217-71. The Government has determined that Z3 will be awarded on the basis of full and open competition for all vessel classes and each vessel will be competed individually.

Market Survey Request:

1. The United States Government (USG) seeks industry feedback on potential contractors in Z3. It is the intent of USG to read through, analyze, and utilize the submitted information.

2. All portions of this market survey are merely for market research purposes, subject to change at any time, are in no way binding the USG, and do not represent an established requirement. Any attachment furnished are for information purposes only with the understanding that the USG is under no obligation of any kind to proceed with an acquisition in any way related to or based upon the information set forth herein.

Nothing contained in this survey should be regarded as a basis upon which to seek payment, reimbursement or other consideration from the USG. Moreover, this market survey is not intended as a solicitation of offers or request for competitive proposals.

3. Response Format: Please submit electronic responses to the Government POC listed below. The subject line must include the message number, (example 1 of 3, 2 of 3, 3 of 3) and “[Company’s Name] response to A-WSM RFI Z3-0001, Attn: [Contract Specialist Name]”

4. Response Due: Please submit electronic responses to this survey as well as questions for clarification to: usarmy.detroit.acc.mbx.wrn-watercraft@mail.mil The Contract Specialist for Z3 is Karen Kennedy

Survey Responses shall be furnished by 24 Sep 2018.

5. Market Survey Questionnaire: The questionnaire below is intended to provide information to assist the USG gather information regarding your company’s capabilities to the desired services outlined above.

ACC-WRN will not publicly disclose proprietary information obtained as a result of this RFI. To the full extent that it is protected by law and regulations, information properly identified by a respondent as Proprietary or Confidential will be kept confidential.

5 U.S.C. § 552(b)(4) defines this data as Documents which would reveal “trade secrets and commercial or financial information obtained from a person and privileged or confidential.”

mailto:usarmy.detroit.acc.mbx.wrn-watercraft@mail.mil

MARKET SURVEY QUESTIONNAIRE:

1. Company Identification:

a. Company Name:

b. Mailing Address

c. Company Website:

d. Location of Facilities:

e. Point of Contact:

f. Phone Number:

g. Fax Number:

h. Email:

i. CAGE Code (if applicable):

j. DUNS (if applicable)

k. North America Industry Classification System (NAICS) Codes for your company:

2. Industry Feedback:

a. Is your company located in or around the Northeast & Southeast Asia, and Central Pacific Coast? If so, what country are you located in?

b. Are you registered in the System for Award Management (www.sam.gov)?

c. Is your company interested in OCCM work in the Northeast & Southeast Asia, and Central Pacific Coast area or responsibility? As a prime contractor or a subcontractor?

d. Where is the location of your shipyard and how many docks do you have available?

e. Do you subcontract to other shipyards?

f. If significant subcontracting or teaming is anticipated in order to perform the OCCM work, do you know of Small Businesses your company can team with or currently have teaming arrangements?

g. Which vessel classes do you have experience in?

h. Has your company provided OCCM services previously, either as a prime contractor or subcontractor? If so, please specify your role (prime or sub), the contract number, vessel class, description of effort, location of required maintenance, and level of effort.

i. Is your company part of other Government contracts that may issue orders for the required services (i.e. GSA, GBS, etc.)? If so, please provide the contract number, contract period of performance and list of labor categories that apply.

j. How many requirements have you fulfilled for the Government in the last two years?

Please be specific on which vessel class, and level of effort.

k. Does your company have a MARAV? If not, can you obtain one?