Statement of Work.doc

Statement of Work For

Generator Repair

1. Scope

The contractor shall provide Depot Level Maintenance Services for MH-6 generators.

2. Requirements

2.1 The contractor shall furnish all labor, facilities, and parts required to inspect, repair, and test the following generators 369D28550, 200SGL111Q-3, GCSG-503-8A.

2.2 The contractor will submit a teardown and evaluation report of each generator. This report will be sent via e-mail to ramo@soar.army.mil or other email addresses as directed by the Contracting Specialist. The report shall identify the generator by part number and serial number and state the proposed repair.

2.3 All repairs shall be performed in accordance with the Original Equipment Manufacture (OEM) engineering drawings and guidelines.

2.4 Packaging will be best commercial practice.

2.5 Item Unique Identification (IUID) marking. The contractor shall inspect the above mentioned parts for the presence of a potential Unique Item Identifier (UII) Machine Readable Information (MRI) in the form of a 2D matrix. If a 2D matrix is present, the contractor shall query the Department of Defense (DoD) National Registry (https://www.bpn.gov/iuid/) to verify the validity of the UII.

2.5.1 The contractor shall not change the UII. If the Label Name Plate containing the 2D matrix cannot be retained during the maintenance process or if the part does not have a UII, the contractor shall contact the Contracting Officer Representative (COR) for a Government Furnished Material (GFM) replacement label. All removals and installations shall be performed in accordance with the following as appropriate: TAPO Document ID 7120-0001, UID Data Label Installation and Removal, Non-Metallic Label Procedures; TAPO Document ID 7108-0003, UID Data Label Installation and Removal, Self-Adhesive Aluminum Label Procedures; and TAPO Document ID 7108-0002, UID Data Label Installation and Removal, Hysol Procedures.