Attch 2 - Statement of Work (SOW).pdf

STATEMENT OF WORK (SOW)

Emergency Lights, Sirens, Radios, and Cabinets

Part 1

GENERAL INFORMATION

1. INTRODUCTION: The United States Secret Service (USSS) Operational Medicine Division (OMD) provides comprehensive medical support for protective operations, special events, training, and field operations. The mission is to enhance operational resilience and deliver exceptional advanced medical capabilities and coverage. This is a non-personal services contract to provide vehicle emergency lights, sirens, radios, and cabinets, including installation services. The Government shall not exercise any supervision or control over the contract service providers performing the services herein.

Such contract service providers shall be accountable solely to the contractor who, in turn, is responsible to the Government.

1.1 Background: The U.S. Secret Service (USSS) Operational Medicine Division (OMD) has 21 vehicles and 3 fully enclosed trailers which need law enforcement emergency lights, sirens, radios, and lockable storage cabinets installed to be usable for OMD personnel. The lockable storage cabinets, sirens, and radios are only for the 21 vehicles not the trailers. The trailers only require emergency lights. The vehicles must all have the same light package to ensure uniformity. The OMD has 4 of the 21 vehicles ready for immediate installation. The remaining 17 vehicles and trailers will be ready for installation once OMD receives them.

1.2 Objectives: The objective of this procurement is to equip (21) vehicles with emergency equipment and other equipment specified in this document.

1.3 Scope: Installation of emergency lights, sirens, radios, and lockable storage cabinets.

The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform installation of emergency equipment as defined in this Statement of Work (SOW) except for those items specified as Government Furnished Property (GFP) and services. All incidental supplies such as wires, connectors, heat shrink, hardware, nuts and bolts, wire ties, loom and any additional required supplies to complete installation.

1.4 Specific Tasks:

1.4.1 CLIN 0001 2026 Chevrolet Tahoe’s

A. The contractor shall purchase, unless noted as Government supplied, and install the emergency equipment listed below into (8) USSS owned and delivered 2026 Chevrolet Tahoe’s.

B. Substitution for any listed equipment shall be comparable and approved by the USSS prior to installation.

The following shall be installed in all (8) USSS provided 2026 Chevrolet Tahoe’s.

C. The contractor shall provide and install the following emergency lighting.

Product Description Installation Location Qty Per Vehicle

Total Quantity

SoundOff Signal nFORCE Front Interior Light Bar – 8 Modules – 4 Red/White/Blue on Driver Side and 4 Red/White/Blue on Pass. Side (PN:

ENFWB01H8W)

Front Windshield 1 8

SoundOff Signal nFORCE Rear Interior Light Bar – 8 Modules – Red/Blue

(PN: ENFWB01WTZ)

Rear Windshield 1 8

SoundOff Signal 500 Handheld Control Panel, w/ Programming and Directional Arrow Function;

(PN: ENGCP15002)

Center Console 1 8

SoundOff Signal 500 Series Siren - 100W Siren Amplifier Box with Link

(PN: ENGSA5101)

Rear Electronics Tray 1 8

SoundOff Signal 100W Speaker

(PN: ETSS100U)

Inside Grille 1 8

SoundOff Signal Siren Speaker Bracket – 2026 Chevy Tahoe Inside Grille 1 8

SoundOff Signal 10ft Harness Kit for Remote Node (PN: ENGHNK06)

Engine Compartment 1 8

SoundOff Signal Remote Node

(PN: ENGND04102)

Engine Compartment 1 8

SoundOff Signal bluePRINT Sync (PN: ENGSYMD01) Passenger Side Dash 1 8

SoundOff Signal mpower® Fascia Light, Stud Mount, 1.5' Pigtail, Black Housing with Stealth Lens, 18 LED Tricolor - Red/Blue/White (PN:

EMPS21GQ4-8)

Grille 4 32

SoundOff Signal Black Grille Mount Bracket 1 Mod Kit for installation on 2025-2026 Chevrolet Tahoe, 2025- 2026 Chevrolet Silverado 1500, 2025- 2026 F-150, 2026 Ford Expedition for use with 3" and 4" Stud Mount, allows the lights to be attached to the front grille, no need to drill holes (PN:

PMP2BK014)

Grille 4 32

SoundOff Signal Surface Mount Intersector Lights – Tricolor – Red/Blue/White

(PN: ENT3B3RBW)

Side Mirrors 2 16

SoundOff Signal SL Running Light, 61" - 5 Module, Dual/Split Color Red/Blue/White, Recessed into OEM Running Boards

(PN: ESLRL61158)

Running Boards 2 16

SoundOff Signal mpower® Fascia 4x2 Light w/ Stud Mount, 18" 5-wire w/ sync option & 1.5 Pigtail, SAE Class 1 & CA Title 13, 9-32 Vdc, Black Housing, 36 LED, Tricolor - Red/Blue/White

(PN: EMPSA05C3-8)

Side Cargo Window Light 4 24

SoundOff Signal Dual Window Shroud Kit 4x2 Light (PN:

PMPSAWSDDB)

Side Cargo Window Light 2 16

SoundOff Signal 4” mpower – Quickmount – Red/Blue – 8’ Lead – Stealth

(PN: EMPS21GPU-J)

Over License Plate 2 16

SoundOff Signal 4” mpower 5-degree wedge – Black

(PN: PMP2WDG05B)

Over License Plate 2 16

SoundOff Signal 3-Wire Isolation Module

(PN: ENGHNK07)

Electronics Tray 1 8

SoundOff Signal obSERVE+ Dome Light - 3" Round, Dual Color - Red/White 2 in Cargo Area, 2 on rear hatch

(PN: EBSDL0002-D)

Rear Hatch / Cargo Area 4 24

911 Circuits SoundOff 500 Series Extension harness kit. The kit includes the CN2, CN4, CN5, CN6, CN7, CN8, CN9 and CN12 harnesses. All harnesses are 25 foot long

(PN: 911.500.25)

Electronics Tray 1 8

This is a T harness that plugs directly into the 2026 or newer Chevy Tahoe Taillight with the 12-pin connector and gives control over the Brake, Tail and Reverse lights.

The other end of the harness is blunt cut. (PN:

911.2025.Tahoe.Tail.Flash.T.Harness)

Electronics Tray 1 8

Custom "80%" Ch26 with Dual Stage modular timer, plug and play harness for SoundOFF 500 BluePRINT for mounting in the front of a vehicle. Includes master circuit breaker, direct connect for front Node, configured with power data and ground for optional 2nd Node and a quick disconnect at console for Ford, Dodge, or Universal interface. The vehicle specific or universal console connector must be added at time of order to complete harness, at an additional cost.

(PN: Ch26.2.500.80%base.Front)

Engine Compartment 1 8

Console quick connect for 80% 500 or CORE base harness, universal (blunt cut) outputs (PN: 80%Console-Universal)

Engine Compartment 1 8

"Universal mount for the Ch26, meant to be mounted to a flat surface. The panel itself has “universal” power wires, which come non-terminated at one end. A ring terminal and heat shrink are supplied to allow the power wires to be terminated to the needed length during installation. A circuit breaker is supplied with an 18 Inch power wire, to be mounted near the battery."

(PN: Ch26 Mount)

Engine Compartment 1 8

D. The contractor shall install the above-mentioned lighting package and wire it the SoundOff signal 500 Siren with provided wiring diagram

a. Button 1 shall be programmed for ALL LIGHTS

b. Button 2 shall be programmed for Front Lights

c. Button 3 shall be programmed for Rear Lights

d. Button 4 shall be Scene Mode – engaging Left Side lights, Right Side lights and Front Side lights to engage in all White

e. Button 5 shall be programmed for Airhorn siren tone activation

f. Button 6 shall be programmed for Wail siren tone activation

g. Button 7 shall be programmed for Yelp siren tone activation

h. Add a "cruise" option for the lights

E. The contractor shall install USSS provided radios/siren starter kits which include a

Motorola radio, siren amplifier box, wiring for radio installation, siren speaker and switches to activate the different siren patterns.

F. Contractor shall install 3-way switches to control the SoundOff Signal Observe+

Dome Lights to be able to illuminate either the Red LEDs or White LEDs. Switch should be mounted on D/S D-Pillar interior trim piece.

G. Contractor shall recess the SoundOff Signal SL Running Lights into the OEM

Running Boards so that they are flush/recessed mounted.

H. The contractor shall provide and install Troy Products Weapons Vault and Cargo

Mount on all 2026 Chevrolet Tahoe’s.

a. Product Specs:

i. Truck Vault or Equivalent

ii. 3rd row seat removed

iii. Spare tire access must be maintained

iv. Vault: 43"W x 30"L x 25 3/4"H

v. Inside drawer: 6 1/8"H x 27 5/8"L x 27 13/16"W

vi. Features: In-drawer map board with pencil tray (26 1/8"W x 22"L), pullout cubby

vii. Overall height may increase by up to 1/2" with protective iron/carpet or 3/4" with all-weather coating; lock style may increase length by 1 5/8"

I. The contractor shall provide tinting of all interior window surfaces (20% driver and passenger window, 5% front windshield visor strip, and 5% rear windows).

J. The contractor shall provide all other wiring, fuses, switches, brackets, and relays needed to complete the equipment installations.

K. The contractor shall install equipment in a consistent manner for each vehicle.

L. Equipment should be compatible and specific to the vehicle with which it is being installed.

M. The contractor shall provide separate invoices for each vehicle, including the Secret Service Property Number (SSPN) assigned to each Tahoe.

N. The vendor shall secure all interior wires. There will be no exposed wires inside vehicle.

O. All windows shall be watertight to protect internal components and wiring.

1.4.2 CLIN 0002 2026 Chevrolet Silverado 1500s

A. The contractor shall purchase, unless noted as Government supplied, and install the emergency equipment listed below into (7) USSS owned and delivered 2026 Chevrolet Silverado 1500s.

B. Substitution for any listed equipment shall be comparable and approved by the USSS prior to installation.

The below shall be installed in all (7) USSS provided 2026 Chevrolet Silverado 1500s.

C. The contractor shall provide and install the following emergency lighting.

Product Description Installation Location Qty Per Vehicle

Total Quantity

SoundOff Signal nFORCE Front Interior Light Bar – 8 Modules – 4 Red/White/Blue on Driver Side and 4 Red/White/Blue on Pass. Side

(PN: ENFWB01K7P)

Front Windshield 1 7

SoundOff Signal Arrow kit – Quick Mount – 6 Modules – Tricolor - Red/Amber/Blue

(PN: EMPAK02487)

Rear Bed Cap 1 7

SoundOff Signal 500 Handheld Control Panel, w/ Programming and Directional Arrow Function;

Center Console 1 7

100W Siren Amplifier Box with Link

(PN: ENGSA5101)

Rear Under Seat Electronics Box 1 7

SoundOff Signal 100W Speaker (PN: ETSS100U) Inside Grille 1 7

SoundOff Signal Speaker Bracket – Chevy Silverado 1500

(PN: ETSSVBK18)

Inside Grille 1 7

SoundOff Signal Remote Node (PN: ENGND04102) Engine Compartment 1 7

SoundOff Signal 3-Wire Isolation Module (PN: ENGHNK07) Engine Compartment 1 7

SoundOff Signal bluePRINT Link Module Harness – 25ft (PN:

ENGLNVH014)

Driver Side Dashboard 1 7

SoundOff Signal bluePRINT Sync (PN: ENGSYMD01) Passenger Side Dash 1 7

SoundOff Signal 4” mpower® Fascia Light, Stud Mount, 1.5' Pigtail, Black Housing with Stealth Lens, 18 LED Tricolor - Red/Blue/White (PN: EMPS21GQ4- 8)

Grille 4 28

SoundOff Signal Black Grille Mount Bracket 1 Mod Kit for installation on 2025-2026 Chevrolet Tahoe, 2025- 2026 Chevrolet Silverado 1500, 2025-2026 F-150, 2026 Ford Expedition for use with 3" and 4"

Grille 4 28

Stud Mount, allows the lights to be attached to the front grille, no need to drill holes (PN: PMP2BK014)

SoundOff Signal SL Running Light, 72" - 5 Module, Dual/Split Color Red/Blue/White, (PN: ESLRL73168)

Running Boards 2 14

SoundOff Signal SL Running Lights Mounting Bracket

(PN: TCRB45A)

Running Boards 2 14

SoundOff Signal Under Mirror Intersectors Light – Red/Blue/White

(PN: ENT2B3RBW)

Under Side Mirrors 2 14

SoundOff Signal Headlamp Flasher (PN: ETHFSS-SP-ISO) Front Head Lamps 1 7

SoundOff Signal Taillamp Flasher (PN: ETFBSSN-P) Rear Taillamps 1 7

SoundOff Signal 4” mpower – Screw Mount – Red/Blue/White – Stealth – 8’ Lead

(PN: EMPS21L2W-8)

Under Tailgate 2 14

SoundOff Signal 3-Wire Isolation Module

(PN: ENGHNK07)

Rear Under Seat Electronics Box 1 7

Under Seat Storage Box Mounting (PN: AC-SB-CHV19-MNT) Under Rear Seats 1 7

Troy Products Under Seat Storage Box w/ Electronics Lidded Storage

Under Rear Seats 1 7

(PN:CP-GB54713-US)

Custom "80%" Ch26 with Dual Stage modular timer, plug and play harness for SoundOFF 500 BluePRINT for mounting in the front of a vehicle. Includes master circuit breaker, direct connect for front Node, configured with power data and ground for optional 2nd Node and a quick disconnect at console for Ford, Dodge, or Universal interface. The vehicle specific or universal console connector must be added at time of order to complete harness, at an additional cost.

(PN: Ch26.2.500.80%base.Front)

Engine Compartment 1 7

Console quick connect for 80% 500 or CORE base harness, universal (blunt cut) outputs (PN: 80%Console-Universal)

Engine Compartment 1 7

"Universal mount for the Ch26, meant to be mounted to a flat surface. The panel itself has “universal” power wires, which come non-terminated at one end. A ring terminal and heat shrink are supplied to allow the power wires to be terminated to the needed length during installation. A circuit breaker is supplied with an 18 Inch power wire, to be mounted near the battery."

(PN: Ch26 Mount)

Engine Compartment 1 7

D. The contractor shall install the above-mentioned lighting package and wire it the SoundOff signal 500 Siren with provided wiring diagram

a. Button 1 shall be programmed for ALL LIGHTS

b. Button 2 shall be programmed for Front Lights

c. Button 3 shall be programmed for Rear Lights

d. Button 4 shall be Scene Mode – engaging Left Side lights, Right Side lights and Front Side lights to engage in all White

e. Button 5 shall be programmed for Airhorn siren tone activation

f. Button 6 shall be programmed for Wail siren tone activation

h. Add a "cruise" option for the lights

E. The contractor shall install USSS provided radios/siren starter kits which include a Motorola radio, siren amplifier box, wiring for radio installation, siren speaker and switches to activate the different siren patterns.

F. Contractor shall install 3-way switches to control the SoundOff Signal Observe+ Dome Lights to be able to illuminate either the Red LEDs or White LEDs. Switch should be mounted on D/S D-Pillar interior trim piece.

G. Contractor shall recess the SoundOff Signal SL Running Lights into the OEM Running Boards so that they are flush/recessed mounted.

H. The contractor shall provide and install Troy Products Weapons Vault and Cargo Mount on all 2026 Chevrolet Silverado 1500s.

a. TruckVault Magnum Height 5'9" Silverado 60-40-TacLock or Equivalent

i. Part Number: T-CHSILMO-19S-PC

ii. Quantity: 7

iii. Features: Lockable, securely mounted in rear cargo area, TacLock security, power to drawer.

b. In Drawer TTP

i. Part Number: P-560

ii. Quantity: 7

iii. Features: 2x 120v, 2x 5v USB, 1x 12v Narrow Drawer.

c. TruckGlide 1500lb Full Extension or Equivalent

i. Part Number: M-TG1500X-6048

ii. Quantity: 7

iii. Features: Full extension capability, supports up to 1500 lbs.

d. TruckGlide Attachment 9 3/4" - 16" or Equivalent

i. Part Number: M-TGINS-MAG

ii. Quantity: 7

iii. Features: Attachment hardware for mounting TruckGlide to

TruckVault.

I. The contractor shall provide and install Bed Caps on all 2026 Chevrolet Silverado 1500s.

a. Fiberglass Construction

b. Paint color to match with 2026 Chevy Silverado (Black)

c. Compatible with emergency light install (custom installed lighting)

d. Cab-high restriction: Cap to match height of vehicle

e. Solid Side (no glass windows), lockable w/toolbox configuration (with light)

f. Solid lockable rear door (no glass windows)

g. Interior bed lighting

h. Integrated Brake Light

J. The contractor shall provide tinting of all interior window surfaces (20% driver and passenger window, 5% front windshield visor strip, and 5% rear windows).

K. The contractor shall provide all other wiring, fuses, switches, brackets, and relays

L. The contractor shall install equipment in a consistent manner for each vehicle.

M. The contractor shall provide separate invoices for each vehicle, including the Secret Service Property Number (SSPN) assigned to each Tahoe.

N. The vendor shall secure all interior wires. There will be no exposed wires inside vehicle.

O. All windows shall be watertight to protect internal components and wiring.

1.4.3 CLIN 0003 2026 Chevrolet Silverado 3500

A. The contractor shall purchase, unless noted as Government supplied, and install the emergency equipment listed below into (1) USSS owned and delivered 2026 Chevrolet Silverado 3500.

B. Substitution for any listed equipment shall be comparable and approved by the USSS prior to installation.

The below shall be installed in all (1) USSS provided 2026 Chevrolet Silverado 3500.

C. The contractor shall provide and install the following emergency lighting.

Product Description Installation Location Qty Per Vehicle

Total Quantity

SoundOff Signal nFORCE Front Interior Light Bar – 8 Modules – 4 Red/White/Blue on Driver Side and 4 Red/White/Blue on Pass. Side

(PN: ENFWB01UMM)

Front Windshield 1 1

SoundOff Signal Arrow kit – Quick Mount – 6 Modules – Tricolor - Red/Amber/Blue

(PN: EMPAK02488)

Rear Spoiler 1 1

SoundOff Signal 500 Handheld Control Panel, w/ Programming and Directional Arrow Function;

Center Console 1 1

Link

Rear Under Seat Electronics Box 1 1

Inside Grille 1 1

SoundOff Signal Remote Node

(PN: ENGN04102)

Engine Compartment 1 1

SoundOff Signal 10ft Harness Kit for Remote Node (PN: ENGHNK06)

Engine Compartment 1 6

SoundOff Signal bluePRINT Link Module Harness – 25ft (PN:

ENGLNVH014)

Driver Side Dashboard 1 1

SoundOff Signal bluePRINT Sync

(PN: ENGSYMD01)

Passenger Side Dash 1 1

SoundOff Signal 4” mpower® Fascia Light, Stud Mount, 1.5' Pigtail, Black Housing with Stealth Lens, 18 LED Tricolor - Red/Blue/White (PN: EMPS21GQ4- 8)

Grille 4 4

SoundOff Signal Black Grille Mount Bracket 1 Mod Kit for installation on 2025-2026 Chevrolet Tahoe, 2025- 2026 Chevrolet Silverado 1500, 2025-2026 F-150, 2026 Ford Expedition for use with 3" and 4" Stud Mount, allows the lights to be attached to the front grille, no need to drill holes (PN: PMP2BK014)

Grille 4 4

SoundOff Signal Headlamp Flasher (PN: ETHFSS-SP-ISO) Front Headlamps 1 1

SoundOff Signal SL Running Light, 72" - 5 Module, Tricolor Red/Blue/White, (PN: ESLRL73168)

Running Boards 2 2

SoundOff Signal Mounting Brackets for SL Runners

(PN: TCRB45A)

Running Boards 2 2

SoundOff Signal 4” mpower® Fascia Light w/ Stud Mount, 18" 5-wire w/ sync option & 1.5 Pigtail, SAE Class 1 & CA Title 13, 9-32 Vdc, Black Housing, 36 LED, Tricolor - Red/Blue/White

(PN: EMPS4009A-8)

Side Rear Door Window 2 2

SoundOff Signal Rock Bracket Kit

(PN: PMP4BKRKLB)

Side Cargo Window 2 2

SoundOff Signal Taillamp Flasher (PN: ETFBSSN-P) Rear Taillamps 1 1

SoundOff Signal 4” mpower – Screw Mount – Red/Blue/White – Stealth – 8’ Lead

(PNEMPS21L2W-8)

Under Tailgate 2 2

SoundOff Signal 3-Wire Isolation Module

(PN: ENGHNK07)

Rear Under Seat Electronics Box 1 1

Under Seat Storage Box Mounting (PN: AC-SB-CHV19-MNT) Under Rear Seats 1 1

Troy Products Under Seat Storage Box w/ Electronics Lidded Storage

(PN:CP-GB54713-US)

Under Rear Seats 1 1

Stage modular timer, plug and play harness for SoundOFF 500 BluePRINT for mounting in the front of a vehicle. Includes master circuit breaker, direct connect for front Node, configured with power data and ground for optional 2nd Node and a quick disconnect at console for Ford, Dodge, or Universal interface. The vehicle specific or universal console connector must be added at time of order to complete harness, at an additional cost.

(PN: Ch26.2.500.80%base.Front)

Console quick connect for 80% 500 or CORE base harness, universal (blunt cut) outputs (PN: 80%Console-Universal)

Engine Compartment 1 1

"Universal mount for the Ch26, meant to be mounted to a flat surface. The panel itself has “universal” power wires, which come non-terminated at one end. A ring terminal and heat shrink are supplied to allow the power wires to be terminated to the needed length during installation. A circuit breaker is supplied with an 18 Inch power wire, to be mounted near the battery."

a. Button 1 shall be programmed for ALL LIGHTS

b. Button 2 shall be programmed for Front Lights

c. Button 3 shall be programmed for Rear Lights

d. Button 4 shall be Scene Mode – engaging Left Side lights, Right Side lights and Front Side lights to engage in all White

e. Button 5 shall be programmed for Airhorn siren tone activation

f. Button 6 shall be programmed for Wail siren tone activation

E. The contractor shall install USSS provided radios/siren starter kits which include a Motorola radio, siren amplifier box, wiring for radio installation, siren speaker and switches to activate the different siren patterns.

H. The contractor shall provide tinting of all interior window surfaces (20% driver and passenger window, 5% front windshield visor strip, and 5% rear windows).

I. The contractor shall provide all other wiring, fuses, switches, brackets, and relays

J. The contractor shall install equipment in a consistent manner for each vehicle.

K. Equipment should be compatible and specific to the vehicle with which it is being

L. The contractor shall provide separate invoices for each vehicle, including the Secret Service Property Number (SSPN) assigned to each Tahoe.

M. The vendor shall secure all interior wires. There will be no exposed wires inside vehicle.

N. All windows shall be watertight to protect internal components and wiring.

1.4.4 CLIN 0004 2026 Dodge Durango

the emergency equipment listed below into (1) USSS owned and delivered Dodge Durango.

The below shall be installed in all (1) USSS provided 2026 Dodge Durango.

Total Quantity

SoundOff Signal nFORCE Front Interior Light Bar – 8 Modules – 4 Red/White/Blue on Driver Side and 4 Red/White/Blue on Pass. Side

(PN: ENFWB01V4X)

Front Windshield 1 1

SoundOff Signal nForce Rear Interior Light Bar – Quick Mount – 6 Modules – dual color -Red/Blue

(PN: ENFWB01QXJ)

Rear Window 1 1

SoundOff Signal 500 Handheld Control Panel, w/ Programming and Directional Arrow Function;

Center Console 1 1

Rear Electronics Tray 1 1

SoundOff Signal Sire Speaker Bracket

(PN: ETSSVBK19)

(PN: ENGND04102)

Driver Side Dashboard 1 1

Passenger Side Dash 1 1

Fascia Light, Stud Mount, 1.5' Pigtail, Black Housing with Stealth Lens, 18 LED Tricolor - Red/Blue/White (PN: EMPS21GQ4-

Grille 2 2

SoundOff Signal Black Driver Side 4” mpower grille bracket

(PN: PMP2BK015-D)

Grille 1 1

SoundOff Signal Black Passenger Side 4” mpower grille bracket

(PN: PMP2BK015-P)

Grille 1 1

Fascia Light, Quick Mount, 1.5' Pigtail, Black Housing with Stealth Lens, 18 LED Tricolor - Red/Blue/White (PN: EMPS21GPV-

Front Fog Light Area 2 2

SoundOff Signal 4” mpower 15-degree wedge – Black

(PN: PMP2WDG15B)

Front Fog Light Area 2 2

SoundOff Signal SL Running Light, 61" - 5 Module, Tricolor Red/Blue/White, (PN: ESLRL61158)

Running Boards 2 2

SL Running Lights Brackets

(PN: PSLVBK04)

Running Boards 2 2

SoundOff Signal Surface Mount Intersectors – Tricolor – Red/White/Blue

(PN:PNT3B3RBW)

Side Mirrors 2 2

SoundOff Signal Mirror Brackets

(PN: PNT3BKUMB4)

Side Mirrors 2 2

SoundOff Signal 4x2” mpower® Fascia Light w/ Stud Mount, 18” 5-wire w/ sync option & 1.5 Pigtail, SAE Class 1 & CA Title 13, 9-32 Vdc, Black Housing, 36 LED, Tricolor – Red/Blue/White

(PN: EMPSA05C3-8)

Side Rear Cargo Window 2 2

SoundOff Signal 4x2” Mpower single shroud

(PN: PMPSAWSSSB)

Side Cargo Window 2 2

SoundOff Signal 3”Mpower – Screw Mount – Red/Blue w/ 8’ leads

(PN: EMPS103EX-J)

Over License Plate Area 2 2

Flash Rear Halos w/ 911 Circuits Taillamp Harness

(PN:

911.Durango.Tail.FLash.T.Harn)

Rear Taillight 3 3

SoundOff Signal Undercover LEDs

– Blue/White – In Brake Lamp Housing

(PN: ELUC3H010E)

Rear Brake Lamps 2 2

Rear Under Seat Electronics Box 2 2

Red/White 2 in Cargo Area, 2 on rear hatch

Rear Hatch / Cargo Area 4 4

Stage modular timer, plug and play harness for SoundOFF 500 BluePRINT for mounting in the front of a vehicle. Includes master circuit breaker, direct connect for front Node, configured with power data and ground for optional 2nd Node and a quick disconnect at console for Ford, Dodge, or Universal interface. The vehicle specific or universal console connector must be added at time of order to complete harness, at an additional cost.

(PN: Ch26.2.500.80%base.Front)

Console quick connect for 80% 500 or CORE base harness, universal (blunt cut) outputs (PN: 80%Console-Universal)

Engine Compartment 1 1

"Universal mount for the Ch26, meant to be mounted to a flat surface. The panel itself has “universal” power wires, which come non-terminated at one end. A ring terminal and heat shrink are supplied to allow the power wires to be terminated to the needed length during installation. A circuit breaker is supplied with an 18 Inch power wire, to be mounted near the battery."

a. Button 1 shall be programmed for ALL LIGHTS

b. Button 2 shall be programmed for Front Lights

c. Button 3 shall be programmed for Rear Lights

d. Button 4 shall be Scene Mode – engaging Left Side lights, Right Side lights and Front Side lights to engage in all White

e. Button 5 shall be programmed for Airhorn siren tone activation

f. Button 6 shall be programmed for Wail siren tone activation

H. The contractor shall provide and install Truck Vault and Cargo Mount on the 2026 Dodge Durango.

a. Truck Vault or Equivalent

i. 3rd row seat folded

ii. Spare tire access must be maintained

iii. Vault: 43"W x 30"L x 25 3/4"H

iv. Inside drawer: 6 1/8"H x 27 5/8"L x 24 5/16"W

v. Features: Pullout cubby

vi. Overall height may increase by up to 1/2" with protective

I. The contractor shall provide tinting of all interior window surfaces (20% driver

J. The contractor shall provide all other wiring, fuses, switches, brackets, and relays

K. The contractor shall install equipment in a consistent manner for each vehicle.

M. The contractor shall provide separate invoices for each vehicle, including the

N. The vendor shall secure all interior wires. There will be no exposed wires inside

O. All windows shall be watertight to protect internal components and wiring.

1.4.5 CLIN 0005 2026 Ford Explorer

the emergency equipment listed below into (4) USSS owned and delivered Ford Explorers.

The following shall be installed in all (4) USSS provided by 2026 Ford Explorers.

Total Quantity

SoundOff Signal nFORCE Front Interior Light Bar – 6 Modules – 3 Red/White on Driver Side and 3 Red/White on Pass. Side

(PN: ENFWB0218C)

Front Windshield 1 4

SoundOff Signal nForce Rear Interior Light Bar – Quick Mount – 6 Modules – dual color -Red/White

(PN: ENFWB0232P)

Rear Window 1 4

SoundOff Signal 8-Button Control Panel – Low Current

(PN: ETCPMP802)

Center Console 1 4

Rear Electronics Tray 1 4

Engine Compartment 1 4

(PN: ENGND04102)

Driver Side Dashboard 1 4

Passenger Side Dash 1 4

SoundOff Signal XF Flush Mount Lights – Dual color - Red/White

(PN: EXFS10002-D)

Front Bumper (Intersection) 2 8

SoundOff Signal 4x2” mpower® Fascia Light w/ Stud Mount, 18” 5-wire w/ sync option & 1.5 Pigtail, SAE Class 1 & CA Title 13, 9-32 Vdc, Black Housing, 36 LED, Dual color – Red/White

(PN: EMPSA05C2-D)

Side Rear Cargo Window 2 8

SoundOff Signal 4x2” Mpower single shroud

(PN: PMPSAWSSSB)

Side Cargo Window 2 8

Red/White 2 in Cargo Area, 2 on rear hatch

Rear Hatch / Cargo Area 4 16

9.11 Circuits T Harness – Flash Tail

Lights – Reverse & Brake Lamps (PN: 911.Ford PIU Tail Flash T Harn)

Tail Lamps 1 4

"Mounts the Ch8 or Ch15 in the covered compartment, in the rear driver’s (left) side corner of the vehicle. This bracket has the circuit breaker attached and comes with a power wire designed to use the Ford Factory, under seat power pick-up point."

(PN: SUV L3 20+)

Electronics Tray 1 4

15 Circuit wiring harness with WP quick disconnects, Modular plug in Smart Timer, 20-foot wire outputs.

(PN: CH15.1.20)

a. Button 1 shall be programmed for ALL LIGHTS

b. Button 2 shall be programmed for Front Lights

c. Button 3 shall be programmed for Rear Lights

d. Button 4 shall be Scene Mode – engaging Left Side lights, Right Side lights and Front Side lights to engage in all White

e. Button 5 shall be programmed for Airhorn siren tone activation

f. Button 6 shall be programmed for Wail siren tone activation

G. The contractor shall provide and install Truck Vault and Cargo Mount on all 2026

Ford Explorers.

a. Product Specs:

i. Truck Vault or Equivalent

ii. 3rd row seat folded

iii. Spare tire access is not required

iv. Vault: 43"W x 30"L x 25 3/4"H

v. Inside drawer: 6 1/8"H x 27 5/8"L x 24 5/16"W

vi. Features: Pullout cubby

vii. Overall height may increase by up to 1/2" with protective

H. The contractor shall provide tinting of all interior window surfaces (20% driver

I. The contractor shall provide all other wiring, fuses, switches, brackets, and relays needed to complete the equipment installations.

J. The contractor shall install equipment in a consistent manner for each vehicle.

K. Equipment should be compatible and specific to the vehicle with which it is being

L. The contractor shall provide separate invoices for each vehicle, including the

M. The vendor shall secure all interior wires. There will be no exposed wires inside

N. All windows shall be watertight to protect internal components and wiring.

1.4.6 CLIN 0006 Rock Solid Cargo 8.5’ x 22’ TA Enclosed Trailer the emergency equipment listed below into (1) USSS owned and delivered Rock Solid Cargo 8.5’ x 22’ TA Enclosed Trailer.

The below shall be installed in all (1) USSS provided Rock Solid Cargo 8.5’ x 22’ TA Enclosed Trailer.

Total Quantity

SoundOff Signal 4” mpower – Screw Mount – Red/White/Blue – Stealth – 8’ Lead

(PN: EMPS21L2W-8)

Trailer Side – Three Mounted along the top (Front/Middle/Rear) Two Mounted along the bottom (Front/Rear)

10 10

SoundOff Signal 4” mpower Black Bezels

(PN: PMPSABZ01B)

Trailer Side 10 10

SoundOff Signal 4x2 mpower – Screw Mount – Red/Blue/White

(PN: EMPSA05BZ-8)

Trailer Rear – Top & Bottom Corners 4 4

SoundOff Signal 4x2 mpower Black Bezel

(PN: PMPSABZ02B)

Trailer Rear – Top & Bottom Corners 4 4

(PN:ENGND04102)

Inside Trailer 1 1

Inside Trailer 1 1

Inside Trailer 3 3

E. The contractor shall provide all other wiring, fuses, switches, brackets, and relays

F. The contractor shall install equipment in a consistent manner for each vehicle.

G. Equipment should be compatible and specific to the vehicle with which it is being

H. The contractor shall provide separate invoices for each vehicle, including the Secret Service Property Number (SSPN) assigned to each Tahoe.

I. The vendor shall secure all interior wires. There will be no exposed wires inside vehicle.

J. All windows/doors shall be watertight to protect internal components and wiring.

1.5 Billing Requirement: Invoices shall provide a description of all work performed and itemized documentation to support charges. Documentation shall be provided to support the contractor’s cost allocation and third-part cost in respect of such charges.

Invoices shall include the following information:

1. The name and address of the contractor / contractor

2. Company tax identification

3. Invoice #:

4. Phone number associated with the work order.

5. Date of order and date of completion.

6. Itemized list of parts needed for work order.

7. Itemized list of all work performed.

8. Itemized list of labor charges.

9. Invoice with the total work completed.

10. US Secret Service Property Number (SSPN) assigned to vehicle.

11. Manufacturer Vehicle Identification Number

12. Vehicle License Plate Number

1.6 General Information

1.6.1 Date of Delivery: USSS will coordinate with the vendor in advance of delivering vehicle(s).

1.6.2 Place of Performance/Delivery: Installations will take place at vendor facility. The selected vendor shall be located within a fifty (50) mile radius of Washington, DC. Drop off and pick up will be coordinated between the Program Office and the Vendor selected.

1.6.3 Hours of Operation: The contractor is responsible for conducting business, between the hours of 0800 - 1700 Monday through Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings.

1.6.4 Type of Contract: The Government will award a firm fixed price purchase order.

1.6.5 Privacy Act: Personnel who have access to Privacy Information shall adhere to the Privacy Act, Title 5 of the U.S. Code, Section 552a and applicable agency rules and regulations.

1.6.6 Physical Security: The contractor shall be responsible for safeguarding all Government equipment, information and property provided for contractor use.

1.6.7 Key Personnel: The contractor shall provide a point of contact (POC) who shall be responsible for addressing customer concerns and billing issues. The name of this person and an alternate who shall act for the contractor when the manager is absent shall be designated in writing to the contracting officer. The POC or alternate shall have full authority to act for the contractor on all contract matters.

USSS Key Personnel:

• Contracting Officers Representative (COR):

Email:

Cell Phone

• Contracting Officer (CO):

Erik Syfert Contracting Officer Email: erik.Syfert@usss.dhs.gov Cell Phone: 281-386-1553

1.6.8 Data Rights: The Government has unlimited rights to all documents/material produced under this contract. All documents and materials, to include the source codes of any software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the contractor without written permission from the Contracting Officer.

All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

1.6.9 Organizational Conflict of Interest: Contractor and subcontractor personnel performing work under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent Organizational Conflict of Interests (OCI) as defined in FAR Subpart 9.5. The Contractor shall notify the Contracting Officer immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the Contracting Officer to avoid or mitigate any such OCI. The Contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the Contracting Officer and in the event the Contracting Officer unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the Contracting Officer may affect other remedies as he or she deems necessary, including prohibiting the Contractor from participation in subsequent contracted requirements which may be affected by the

OCI.

PART 2

DEFINITIONS & ACRONYMS

2. DEFINITIONS AND ACRONYMS:

2.1. DEFINITIONS:

2.1.1. CONTRACTOR. A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

2.1.2. CONTRACTING OFFICER (C.O.). A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the Government. Note: The only individual who can legally bind the Government.

2.1.3. DELIVERABLE. Anything that can be physically delivered but may include non-manufactured things such as meeting minutes or reports.

2.1.4. KEY PERSONNEL. Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the SOW. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the people that are listed in the proposal.

2.1.5. PHYSICAL SECURITY. Actions that prevent the loss or damage of Government property.

2.2. ACRONYMS:

CFR Code of Federal Regulations CO Contracting Officer CONUS Continental United States (excludes Alaska and Hawaii) COR Contracting Officer Representative COTS Commercial-Off-the-Shelf CPFF Cost Plus Fixed Fee FAR Federal Acquisition Regulation FFP Firm Fixed Price GFP Government Furnished Property HSAR Homeland Security Acquisition Regulation LH Labor Hour NCR National Capital Region OCI Organizational Conflict of Interest OCONUS Outside Continental United States (includes Alaska and Hawaii) ODC Other Direct Costs

PIPO Phase In/Phase Out POC Point of Contact PM Program Manager SOW Statement of Work TE Technical Exhibit TM Time and Material TPOC Technical Point of Contact

PART 3

GOVERNMENT FURNISHED PROPERTY, EQUIPMENT, AND SERVICES

3. GOVERNMENT FURNISHED ITEMS AND SERVICES:

3.1. Services: The Government will be responsible for the transportation of vehicles and trailers to and from the vendor facilities.

3.2 Equipment: The Government will provide emergency equipment on a case-by-case basis unless the vendor has been tasked with procuring the equipment in addition to installation services. USSS reserves the right to make changes to equipment provided and will notify the vendor of these changes.

Each Vehicle will have the following GFE:

• APX8500 High Power / All Band Mobile with 07 Control Head and Siren o (1) Motorola Radio to remote Control Head Cable with Blue Ring

Model No: HKN6169B o (1) Motorola VIP Cable with Yellow Ring

Model No: HKN6196B o (1) Motorola Control Head Power Cable with Red Ring

Model No: HKN6188B o (1) Motorola APX 07 – Remote Control Head (Display)

Model No: PMHN4191C o (1) Palm Microphone Kit

Model No: HMN1090D o (1) Whelen – Motorola Siren Amplifier (01-0687630-00A)

Model No: TT2592A o (1) Motorola “Y” Cable

Model No: KT000247A01 o (1) Whelen – Motorola Siren Hardware Install Kit (01-0487630-00A)

Model No: TT05707A o (1) Whelen-Motorola/ Cable Kit (DB25 - 01-0487630-03A)

Model No: TT05900AA o (1) 12 Volt DC 30/40A SPDT Relay o (1) Mag Mount Antenna Line w/ Whip Antenna

Model No: MGNT-FT-NITI o (1) Motorola Radio Key

Model No: 2135 o (1) Fuse Holder w/ 30A Fuse o (1) 12 VDC Radio Power Cable

Model No: HKN6110B o (1) Motorola/ APX8500 Dust Cover Kit

Model No: KT000245A01 o (1) Sound Off Signal External Speaker

Model No: ETSS100J5 o (1) Sound Off Signal Speaker Bracket (Packaged w/ speaker) o (1) Motorola Radio Mounting Bracket

Model No: HLN7003A o (1) Motorola Internal Audio Speaker

Model No: RSN4003A o (1) Motorola 07 Control Head Mounting Bracket

Model No: HKN6186A o (1) Motorola GCAI Extension Cable

Model No: RKN4167A

3.3 Materials: The Government will provide specification sheets outlining the placement of emergency lights and equipment.