Attachments.pdf

PDF 124 KB Posted

Attached to
MPCA- Yamaha Outboard Motor, Rigging, Installation
Solicitation number
2000018359
Issued by
Dakota County, Minnesota

About this file

This file consists of bidding attachments and declarations for a Request for Bid (RFB) issued by the Minnesota Pollution Control Agency (MPCA) for the procurement of a Yamaha outboard motor and related services. The MPCA seeks to purchase a 115 horsepower Yamaha outboard motor, or an approved equivalent, including rigging and installation services on an existing boat at the vendor's location. Vendors must be located within a 200-mile radius of the MPCA's Baxter facility located at 7678 College Road, Baxter, Minnesota 56425. All responses must be submitted electronically through the SWIFT Supplier Portal, with a questions deadline of 2:00 PM Central Time on May 21, 2026. The solicitation requires strict compliance with specified equipment specifications, and late or non-electronic responses will not be accepted.

Pricing must be entered at the unit line level in SWIFT, with installation or mounting services charged as separate line items when requested by the ordering entity unless otherwise indicated in the contract. Responders should provide hourly labor rates for installation services on the attached price schedule, or enter "N/A" if such services are unavailable. Responders must disclose prompt pay discounts offered, with options ranging from 1% to 5% discounts depending on payment timing (10 to 30 days), or indicate if no discount is available. Delivery timeframes must be specified as the number of days after receipt of order. All responders must complete Attachment A declarations certifying the accuracy of their submissions, confirming non-collusion, disclosing any organizational conflicts of interest, and providing authorized signatures with appropriate contractual authority. Contractor contact information for both contract management and purchase order receipt must be provided.

View the file

Other files

File Type Posted
Request_for_Bid.pdf PDF
Sample_Contract_and_Exhibits.pdf PDF
MPCA-_Yamaha_Outboard_Motor,_Rigging,_Installation.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Rev. April 2025

ATTACHMENT A: RESPONDER DECLARATIONS

The undersigned certifies, to the best of his or her knowledge and belief, that:

A. Response Contents. The information provided is true, correct, and reliable for purposes of evaluation for potential contract award. The submission of inaccurate or misleading information may be grounds for disqualification from the award as well as subject the Responder to suspension or debarment proceedings as well as other remedies available by law

B. Authorized Signature. This Declaration is signed by the appropriate person(s), with the authority to contractually bind the Responder, as required by applicable articles, bylaws, resolutions, minutes, and ordinances.

C. Non-Collusion Certification.

1. The Proposal has been arrived at by the Responder independently and has been submitted without collusion and without any agreement, understanding or planned common course of action with any other vendor designed to limit fair or open competition; and

2. The contents of the Response have not been communicated by the Responder or its employees or agents to any person not an employee or agent of the Responder and will not be communicated to any other individual prior to the due date and time of this Solicitation. Any evidence of collusion among Responders in any form designed to defeat competitive responses will be reported to the Minnesota Attorney General for investigation and appropriate action.

D. Organizational Conflicts of Interest. To the best of Responder’s knowledge and belief, and except as otherwise disclosed, there are no relevant facts or circumstances which could give rise to an organizational conflict of interest.

An organizational conflict of interest exists when, because of existing or planned activities or because of relationships with other persons,

1. a vendor is unable or potentially unable to render impartial assistance or advice to the State;

2. the vendor’s objectivity in performing the contract work is or might be otherwise impaired; or

3. the vendor has an unfair competitive advantage.

If after award, an organizational conflict of interest is discovered, an immediate and full disclosure in writing must be made to the State’s Chief Procurement Officer which must include a description of the action which the contractor has taken or proposes to take to avoid or mitigate such conflicts. If an organizational conflict of interest is determined to exist, the State may, at its discretion, cancel the contract. In the event the Contractor was aware of an organizational conflict of interest prior to the award of the contract and did not disclose the conflict to OSP, the State may terminate the contract for default. Organizational conflicts of interest terms apply to any subcontractors for this work.

E. Copyrighted Material Waiver. By signing its Response, the Responder certifies that it has obtained all necessary approvals for the reproduction and distribution of the contents of its response.

SIGNATURE PAGE TO FOLLOW

By signing this form, Responder acknowledges and certifies compliance with all applicable requirements indicated above.

Company Name:

Signature:

Printed Name:

Title:

Date:

Phone Number:

Email Address:

ATTACHMENT B: PRICING

1. Pricing.

A price schedule document will not be used for this solicitation. Responders must enter their bid price(s) in SWIFT at the unit line level. If a responder needs assistance with entering their proposal, they may contact the Vendor Assistance Help Desk at (651) 201-8100, option #1, and then option #1 again.

2. Installation Services.

A responder must apply a charge as a separate line item for installation or mounting services if such service is requested in writing by the ordering entity. The price for equipment, attachments, or options does not include installation or mounting costs unless otherwise indicated in the Contract or Price Schedule. A responder should include an hourly labor rate on the Price Schedule attached as Exhibit D to the Sample Contract. If installation services are NOT AVAILABLE, enter “N/A” on the Price Schedule. A responder should carefully examine the Price Schedule for installation pricing instructions.

3. Alterations or Erasures. The State reserves the right to reject a response containing an alteration or erasure of any price used to determine the lowest responsible responder unless the alteration or erasure is done in a manner that is clear and authenticated by an authorized representative of the Responder. An acceptable way to make an alteration or erasure is to cross out the price, print the correction in ink adjacent to it, and have an authorized representative of the Responder initial and date that correction.

ATTACHMENT C: ADDITIONAL INFORMATION

1. Contractor’s Contact Information. Provide the contact information for the representative responsible for the management of the contract and the representative receiving purchase orders.

Vendor’s Legal Name

Address

Contact Person (Contract)

Email Address

Telephone Number

Contact Person (PO Order)

Email Address

Telephone Number

2. Prompt Pay Discount. What prompt pay discounts do you offer? Select all that apply, if “other,” specify terms in the comment section below:

□ 1% in 30

□ 2% in 30

□ 3% in 30

□ 1% in 10, Net 30

□ 2% in 10, Net 30

□ 3% in 10, Net 30

□ 5% in 10, Net 30

□ Other

□ 1% in 15, Net 30

□ 2% in 15, Net 30

□ 3% in 15, Net 30

□ 1% in 20, Net 30

□ 2% in 20, Net 30

□ 3% in 20, Net 30

□ Net 30

□ None

Comments:

3. Delivery Time Frame. Responder must enter a delivery time frame after receipt of order (ARO) in the space below.

File details come from the government source that posted it. Updated .