AttachmentA.pdf
PDF 105 KB Posted
- Solicitation number
- FA8212-21-R-1164
About this file
This document contains engineering data requirements and unique identification marking instructions for the manufacture of an AN/DSM-157 Guided Missile Test Set Television Monitor. Key details include specifications and standards to be followed in manufacturing component parts and assemblies per the engineering drawings. Unique identification is required to be applied to each part using both human-readable and machine-readable markings per MIL-STD-130, including vendor cage code, date of manufacture, and sequential unique number. The related federal contract opportunity is solicitation FA8212-21-R-1164 for the AN/DSM-157 Guided Missile Test Set Television Monitor, restricted to approved sources, as described in the attached solicitation and attachments.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA821221R1164_______0002.pdf | ||
| FA821221R1164_______0001.pdf | ||
| Transportation.pdf | ||
| SectionM.pdf | ||
| CDRLS.pdf | ||
| EDL.pdf | ||
| SectionL.pdf | ||
| 260.pdf | ||
| SQSSectionC.pdf | ||
| PackagingSOW.pdf | ||
| PackagingRequirement.pdf | ||
| FA821221R1164.pdf | ||
| IUID.pdf |
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
MONITOR, TELEVISION (AGM 65)
2. PART NUMBER:
6457314-2
3. NATIONAL STOCK NUMBER:
4935-01-532-1694JB
PREPARED BY:
ALEX MATESEN
OFFICE SYMBOL:
OO-ALC/GHGGA
DATE:
23 JAN 2018
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA
WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. CONTRACTOR IS RESPONSIBLE TO COMPLETELY RESEARCH THESE MANUALS, SPECIFICATIONS, AND STANDARDS AND FULLY UNDERSTAND THE REQUIREMENTS NECESSARY FOR MANUFACTURE OF COMPONENT PARTS AND ASSEMBLIES. ALL DEVIATIONS, MINOR AND MAJOR, FROM THE ENGINEERING DRAWING PACKAGE SHALL BE SUBMITTED AFNWC/NWCAD.
6. WHEN MILITARY DOCUMENTS LISTED IN THE ENGINEERING DRAWING ARE CANCELLED, THEY SHALL BE REPLACED BY THE INDUSTRY EQUIVALENT DOCUMENT SPECIFIED ON THE MILITARY DOCUMENTS CANCELLATION NOTICE. THIS APPLIES TO THE ORIGINAL AIRCRAFT MANUFATURERS SPECIFICATIONS THAT ARE CITED IN THE DRAWING AS WELL. THE CHARACTERISTICS OF TYPE, GRADE, CLASS, ETC. SPECIFIED IN THE CANCELLED MILITARY DOCUMENT SHALL BE MAINTAINED OR EXCEED THOSE CHARACTERISTICS WHEN APPLYING THE INDUSTRY EQUIVALENT DOCUMENT(S). WHEN THERE IS NO LISTED REPLACEMENT THE CONTRACTOR SHALL REQUEST AND RECOMMEND A SUBSTITUTE DOCUMENT AFNWC/NWCAD THROUGH THE GOVERNMENT
CONTRACTING OFFICIAL.
7. USE MIL-STD-130 AND DRAWING 200733803. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED TO EACH PART PER MIL-STD-130. THE UID SHALL BE BOTH HUMAN READABLE INFORMATION (HRI) MARKINGS AND MACHINE-READABLE INFORMATION (MRI) MARKS. THE MRI SHALL BE ACCOMPANIED BY A HRI. BOTH MARKS WILL BE LIMITED TO 16 ALPHANUMERIC CHARACTERS INCLUDING THE VENDOR CAGE (FSCM) OF THE CONTRACTOR NAMED ON THE CONTRACT, DATE OF MANUFACTURE IN THE FORMAT MMYY, AND A UNIQUE 4-DIGIT NUMBER STARTING WITH 0001 IN NUMERICAL ORDER OF MANUFACTURE. THE HRI SHALL APPEAR AS "SN 9874701070001". THE HEIGHT OF EACH ALPHANUMERIC CHARACTER IN THE HRI SHALL BE A MAXIMUM OF .125 INCHES. MARKINGS FOR BOTH THE MRI AND HRI SHALL BE TO SAE AS 9132. THE LOCATION OF THE UID SHALL BE THE SAME LOCATION AS IDENTIFIED ON THE DRAWING. THE METHOD OF MARKING FOR HRI SHALL BE LIMITED TO ELECTRO-CHEMICAL ETCHING, DOT PEEN, VIBRO PEEN, OR MICRO-MILL. THE DEPTH OF EACH MARK SHALL BE FROM .003 - .005 INCHES UNLESS OTHERWISE SPECIFIED ON THE ORIGINAL DRAWING. THE METHOD OF MARKING FOR THE MRI SHALL BE LIMITED TO TESA BRAND SECURE 6973 BLACK UID LASER ETCHED MARKING TAPE (FOR MORE INFORMATION REFER TO WWW.TESATAPE.COM/PROFESSIONAL/INDUSTRY/APPLICATIONS/UIDDOD) AND SHALL ONLY BE PLACED ON THE TOP COAT OF THE PAINTED COMPONENTS. THE MRI MARK ON THE TESA TAPE SHALL CONTAIN HRI EQUIVALENT INFORMATION IN BOTH 2D MATRIX FORM AND IN HUMAN READABLE FORM. WHEN ITEMS CANNOT BE FULLY MARKED OR TAGGED DUE TO LACK OF MARKING SPACE OR BECAUSE MARKING OR TAGGING WOULD HAVE A DELETERIOUS EFFECT, THE FULL DETAILED UID MARKING REQUIREMENTS SHALL BE APPLIED TO A SUPPLEMENTAL BAG OR OTHER PACKAGE THAT ENCLOSES THE INDIVIDUAL ITEM.
File details come from the government source that posted it. Updated .