Attachment19_CAWO_Specialty_and_Lighting_Cutsheets.pdf

CAWO

Dr. Carter Woodson Home National Historic Site

PRODUCTION DOCUMENTS II

SPECIALTY PRODUCTS + LIGHTING CUTSHEETS

January 29, 2021

Prepared by Howard+Revis in collaboration with Mills + Schnoering Architects, LLC, for the National Park Service and the Association for the Study of African American Life and History

901 2nd Street NE Washington, DC 20002 www.howardrevis.com

Attachment 19_CAWO Specialty Lighting Cutsheets

���������,-����.��/0)10#1� ���.��/0�10$1������������*���������� ��2��*���� �3� ��4������ �5�&� ���������� ����67�* ������������78��'��&���������!���� �2-���9+4�#.���:������� ���������

?@ABCD�EB@F�GFCHIJAKD�L�FCHIJAK�@AMI� NCBOA�@AMI� ?@ABCD�EB@FGFCHIJAKD��L�FCHIJAK�@AMI�PQJE�R@BKA�@HSTAC�HC�N@BCA�IEQA@K�B??AIIHCU?@ABCD�EB@FGFCHIJAKD�L�FCHIJAK�@AMI��SIQMN�JEA�FQVAK�WHSMJQMN�RCB?XAJ ?@ABCD�EB@FGFCHIJAKD�L�FCHIJAK�@AMI�SIQMN�JEA�WBNMAJQ?�FQVAK�WHSMJQMN�RCB?XAJ?@ABCD�EB@FGFCHIJAKD�L�FCHIJAK�@AMI�SIQMN�JEA�FQVAK�YZ�KANCAA�WHSMJQMN�RCB?XAJ?@ABCD�EB@FGFCHIJAKD�L�FCHIJAK�@AMI�SIQMN�JEA�BK[SIJBR@A�EQMNAK�RCB?XAJ

CBQIAK�@AMI.�$.� .�\7�.�\8� .�$$�.�/7� .�/7� .�/7� .�/7�.�8��

.�88� S]�JH�_̂̀ .�/\�.�\\� .�/7�

abcdefbg�

������1 �w��sos��v�vpts��tu~p����������nh�022#/1 �77���+�� #����+�� /����+� #$%�h�022$�1 �7$���+�� $����+�� /����+� �/%��h�022\�1 �.8���+�� /�$��+�� /$���+� �8% ��j�lm�h�ri��m��irjlkrl�����������������������j��xy�������}��ptsqt}wpo}t �o�p�q��t}��}t�t}tu�t���xyyyz� ��l �� �~��__� .�8\ 8/ 8\ 78�Y__� .�\# 78 7$ �.���__� .�8� 7\ 7$ �.��̂__� .�8/ 7\ 7� �.��___� ��.. 7� 87 78�Z__� ��.$ 7� 7. �.�Y�__� ���8 7� 8/ 7/

.��7� .�$�� .�7��.�8/�

FCHIJAK�@AMI�

�b� ¡¢�c£�¢¡¤¥f¦cd¢¥¡��� a¢¡¢g �¥§d¢¥¡g�� f̈¥¤¢£b�©¢¦b¡g¢¥¡g��

CBQIAK�@AMI�

ª«¬®«f©bf¢¡̄��¥©b°°± ²³« ´ á µ®³ ��� �����*��(������3� (�'��*��3� �"3�

�"�����������0�̧(�¹(�º���������� ����� ������1��� �º ��4 ����� 3� ��6

º�&����<�º�&���..�̧���..�̧�\..�̧�7..�̧#...�̧#$..�̧���..��̧�̧� ��· á�4�»¼�4�á½¾�4ª»¿�4� ÀÀÀÀÀ�4�µ®³�4�µ®µ±�4�µ®Á¼�4�¿³³�4�¿³µ±�4�¿³Á¼�4�²�4�²Â°�4�°�4Ã�4�½�4��4�µ�4�³�4³»�4�µ±�4�µÄ�4Á¼�4��́4�¼a�4a�4¿�4ÅÆ�4�³«�4�¼«�4�Ǽ«�4°°±�4�°½±�4�°È±�4�°É±�4�Ãʱ�4�þ±�4�½²±�4�±ª�4� ²°Ë�Ì�²½½Ë�������������� ³»®Í¿�¼ «̈ÁÆ�a¬�̈«³Î�ΫÍ�Ï��Ð̈«Ñ�̈Ñ�´́ � ®Í³ ª«ÑÍ�ÎÍ¿ »́ ́³³«ÆγaÎÍγ¼²°±ª ÅÁ¢££�¡¥d�Ò¥fÓ�PQJE�@HSTAC�L�IEQA@K�Ô??AIIHCU

Õ�sswÖ�t×ØÙÚÛÜ�ÝØÙ�Þß�ààáâãä l���{j�å

&�������7 æææçèéêëìëëçíîê ïðèñ�òòóôõõõôö÷õõ6-��.�8�.��\�.�.

øùúû��� ����� �

Catalog No:

Lamp Type:

Fixture Type:

Page: 1 of 9

FIXTURE: KM-[LENGTH]-30K-HO-F-AS-[FINISH]-E-[TYPE]

POWER SUPPLY: PS010V-3X96-24-LIN

LEDs BY MANUFACTURER CL2

Date:03/13/2020 jeff Text Box Existing LED Lensed Linear Fixture by Base Building provides wall washing for exhibits

-./01�/12�31/4.56!�$78#�$� !��9 : ;-60<=<0.4<1>�;?664!� :�@����A

B� 7!�C��D ����������

%������D���DEDE FGDE�H�����*�C����

�@EE��)����I����J�I%

� �#������KDL�@LM��!�:�A@��ADG�@GGF���(�:�A@��ADA�N@EM������� �&&�������O��

/PQRSTRUV�WXTUTWYVURZYRWZ[� -\]VU�RŜPY[������G�A'����@�'� /PQVSZ[�_�����A�E��������GEEÈ��FE#�+ � /PQRSTRUV�VaaRWTWb[�_������A��O';\PUWV[� '��� ��8B���)C�E�� � � DMEÈ�:�FE#�+�� GEEÈ�:�FE#�+�/PQVS�QTRSYVSTSWV[� �Ec���������������

������AE�EEE����������E �1̂ YRWZ[� *�����)

��� GAAd��

��������������������eTYVURTf[� H���:�B� C�����&��� �g@F������ C����� ���������������& �gGM�������gA@���� "���� ������ K� ��� �����������e\PSYRSh[� ) ��� ��9����%� ����� �i�&&�������������� �� �6fVWYURWTf[� � ������i�&&�������������

�����������������=RSRZX[� '���

��"�FE@E����%���

���������2VRhXY[� g@F��:�E�@����E�D�%���E�EN����E�EF

�����������jTYRShZ[� +!DE0VUYRaRWTYR\S[� �_��������

Page: 1 of 10

FIXTURE: LPLC-LV-1-37-930-MD-01

TRACK: I.TR-LV-[LENGTH]-48-01 + 4451-0048-100-UNV-TD10 +

TRACK ACCESSORIES AS REQUIRED

LEDs BY MANUFACTURER HL1

Date:03/13/2020 jeff

Existing track by base building; 51mm/ 2" track heads, other than one per circuit provided by base building are provided by exhibits. See RCPs for layouts, quantities per color (black in Intro; white everywhere else) and whether spot, medium or elliptical lens required; lamped 3000K/ 90CRI

&'�������(�)('�'*�)+���,�+�(�*-��.��)($��+!�)�(�.���)(�+!��/���.!("�0�1)�.�'��(��)�����2� # 3!*��'�0!����4�/�'!���#5-�#6#6 78#6�9�':;�<�23!'��(�-�*')���=66-�>�(��?!:�@A'?/��B��!(!0!�C#D�=DE-��;��%=F;%#8;=887���4;��%=F;%#%;G=6E��111;)"'HH)();��+I'*

J�KL�MNOPQROS�RLKTSUPKLV�QWVPXOOXPQKWY�MQWQMNM�ZQVPXWUS�K[�\]]MM�̂_̀ ab�cSPdSSW�SeSLf�RLKTSUPKL�MNVP�cS�gSRPh J�KL�MNOPQROS�RLKTSUPKLV�QWVPXOOXPQKWY�MQWQMNM�ZQVPXWUS�K[�\]]MM�̂_̀ ab�cSPdSSW�SeSLf�RLKTSUPKL�MNVP�cS�gSRPh J�KL�MNOPQROS�RLKTSUPKLV�QWVPXOOXPQKWY�MQWQMNM�ZQVPXWUS�K[�ijMM�̂jklb�cSPdSSW�SeSLf�RLKTSUPKL�MNVP�cS�gSRPh J�KL�MNOPQROS�RLKTSUPKLV�QWVPXOOXPQKWY�MQWQMNM�ZQVPXWUS�K[�ijMM�̂jklb�cSPdSSW�SeSLf�RLKTSUPKL�MNVP�cS�gSRPh������3m�n�=7++�@opB&�q93�

������3m�n�%=>>�@#pBrs33�rs<C� t�u�������������3m�n�=7++�@opB

������3m�n�%=++�@#pB ������3m�n�8E++�@=vpB

>sw;#vp@GF++B

J�KL�MNOPQROS�RLKTSUPKLV�QWVPXOOXPQKWY�MQWQMNM�ZQVPXWUS�K[�\]]MM�̂_̀ ab�cSPdSSW�SeSLf�RLKTSUPKL�MNVP�cS�gSRPh xyz�{|}~@=F#++B ��z@8%++B n�op@=7++B n�op@=7++B >sw;#vp@GF++B ��z@E#++B>sw;8�z@75++Bn�=vp@8E++B >sw;%�z@=86++Bn#p@%=++B >sw;Ep@=E5++Bn�#p@%=++B

%�p@=88++B 8yp@7#++B #vp@GF++B

��z@8%++B

Page: 2 of 10

TRACK: I.TR-LV-[LENGTH]-48-01 + 4451-0048-100-UNV-TD10 +

TRACK ACCESSORIES AS REQUIRED

LEDs BY MANUFACTURER HL1

Date:03/13/2020 jeff Rectangle jeff Rectangle jeff Rectangle jeff Rectangle jeff Rectangle jeff Rectangle jeff Rectangle jeff

Existing track by base building; 51mm/ 2" track heads, other than one per circuit provided by base building are by exhibits. See RCPs for layouts, quantities per color (black in Intro; white everywhere else) and whether spot, medium or elliptical lens; lamped 3000K/ 90CRI

+,�������-�.-,�,/�.0!��1�0�-�/2��3��.-*��0'�.�-�3���.-�0' �4���3'-(�5�6.�3�,��-��.�����7��8 9'/��,!5'����:�4�,'� �8�2�8�8�

>!�� )�� ?� )��� @��9�9A�B7)C7�8C7>�D�5.,0 )C� ?? 8��� @��9�9A�B7)C7�8C7D+�.5��:E��5 )?� ?� F8� @��9�9A�B7)C7�8C7�:>!�� ?�� ?C ?B�� @��9�9A�B7)C7�)�7>�D�5.,0 )�� ?F 88B� @��9�9A�B7)C7�)�7D+�.5��:E��5 )F� ?8 F�� @��9�9A�B7)C7�)�7�:

>!�� �?� )� C??� @��9�9A�B7�B7�8C7>�:E��5 �)� )� 88?� @��9�9A�B7�B7�8C7:9�.5��:E��5 �B� )C B�B� @��9�9A�B7�B7�8C7�:>!�� ��� ?8 C�)� @��9�9A�B7�B7�)�7>�:E��5 �C� ?B 8)�� @��9�9A�B7�B7�)�7:9�.5��:E��5 ��� ?� B��� @��9�9A�B7�B7�)�7�:

�)8��G�,E��>�79',��-�2�/,.���B��2�D�-��H'E�IJ,H4��K��'-'5'�L8M�BMC2������B?��8)�B))����:����B?��8��FB�C��666�.(,NN.-.���0O,/ �'EE��'/3�� BF� B8 )F� @��9�9A�B7�B7�8C7��8C��P B?� �'EE��'/3���� BC� B) )�� @��9�9A�B7�B7�)�7��)���P

8C��P)���P

��9A�Q�B�DD�IRSK

��9A�Q��BDD�I8SK

��9A��T99��T>L���Q��BDD�I8SK

��9A�Q�)CDD�IBUSK

�� 8F BB�� @��9�9A�B7B�7�8C7>�>!�� B�� 8� �8� @��9�9A�B7B�7�8C7D+D�5.,0 �� 8� BBC� @��9�9A�B7B�7�)�7>�>!�� B�� )B ��� @��9�9A�B7B�7�)�7D+D�5.,0)���I�����*���+�,4E�K����@ 9VD�M>IE0K WXXYZ[Z\IE0�O�6K DT]��TM+�9TI�5K D�+�9>���@�9�T+I�K���IPK8C��P)���P�̂��*��/�����-��E'0!

B?���8C��P)���P

Page: 3 of 10

TRACK: I.TR-LV-[LENGTH]-48-01 + 4451-0048-100-UNV-TD10 +

TRACK ACCESSORIES AS REQUIRED

LEDs BY MANUFACTURER HL1

Date:03/13/2020 jeff Rectangle jeff

Existing track by base building; 51mm/ 2" track heads, other than one per circuit provided by base building are by exhibits. See RCPs for layouts, quantities per color (black in Intro; white everywhere else) and whether spot, medium or elliptical lens; lamped 3000K/ 90CRI

%&�������'�('&�&)�(*���+�*�'�),��-��('$��*!�(�'�-���('�*!��.���-!'"�/�0(�-�&��'��(�����1� 2 3!)��&�/!����4�.�&!���25,�2626

�78�7��

�����9:;<=><? @ @4AB�C

DE26�F�&GH�I�13!&��'�,�)&(���J66,�K�'��L!G�MN&L.��O��!'!/!�P2Q�JQR,��H��#JSH#2EHJEED���4H��#JSH#2#HTJ6R��000H("&UU('(H��*V&)

�������7����W ��X���78�7�8�����7� ��YZ[��� �������X�����7��������� �7�\�8���]

�]\̂ _̀@ab�1�FG!�c���G('/�(�!G�)����'�$����!G���3d�e�ER**�MJfgO�]\̂ hi@ab�1�FG!�c���G('/�(�!G�)����'�$����!G���3d�e�#J**�M2gO �]\̂ _j@ab�1�FG!�c�-�'����*.�G�&+���$����!G���3d�e�ER**�MJfgO�]\̂ _h@ab�1�FG!�c�-�'����*.�G�&+���$����!G���3d�e�#J**�M2gO�]\̂ _k@b_�1��GG(��(�!G�G�')�$����!G���3d�e�ER**�MJfgO�]\̂ ha@b_�1��GG(��(�!G�G�')�$����!G���3d�e�#J**�M2gO�]\̂ _l@ab�1�FG!�c�)�(GG1�('"�G�&+���$����!G���3d�e�ER**�MJfgO�]\̂ hb@ab�1�FG!�c�)�(GG1�('"�G�&+���$����!G���3d�e�#J**�M2gO

MJO��'G��!+!(G!.G��0(�-�*�/�G��!G���3d�eJD**�MmgOH

��� ���� ���i�@�I('"G�\�8����8�� �� il�@��!G���3d�e�JD**�MmgO�lbk�@�2R66n,�D6�� A���@�I����JEo���������p�ilqq�WrsZ� ���������p�jkqq�WitsZ� ���������p�hiqq�WbsZ�\8�@�K�/(&*�2So hi�@��!G���3d�e�#J**�M2gO ���@�I����J2o���@�4G��/�2Ro���@�u(/��4G��/�SJo���@�u!GG�u!)-�� b�@�%�&.G�MJOjk�@��!G���3d�e�ER**�MJfgOlja�@�E666n,�D6�� A���@�I����JTo\8�@�K�/(&*�2Eo���@�u(/��4G��/�SSoai�@�u-(��� ab�@�FG!�c

Page: 5 of 10

TRACK: I.TR-LV-[LENGTH]-48-01 + 4451-0048-100-UNV-TD10 +

TRACK ACCESSORIES AS REQUIRED

LEDs BY MANUFACTURER HL1

Date:03/13/2020 jeff Rectangle jeff Rectangle jeff Rectangle jeff Rectangle jeff Rectangle jeff Rectangle jeff Rectangle jeff Text Box see RCPs for quantities per area jeff

Existing track by base building; 51mm/ 2" track heads, other than one per circuit provided by base building are by exhibits. See RCPs for layouts, quantities per color (black in Intro; white everywhere else) and whether spot, medium or elliptical lens; lamped 3000K/ 90CRI

-�.����/.�-�0/�1/�

�2345 ��#�)6�789�:;,,<<=��#�(6�(>9�:),,,<<=?3?5 ��#�@6�@A9�:+,,,<<=43B5 ��#�C6�),D9�:(,,,<<=E3F5

�GHI������J�K

�&LM"N��#��' "# OP��1Q1���1�/�OR�����S"#�+�LT�;

��"��L�NL%�U%�L���U< &LV"<"%��*��W"�U%TL&<��UL%�W"&"U%�<�'�X"�NW�%S"!�YU�WL���%L�UN"C(+,�ZL�[\� �����&"%�*���U�"�),,*�HL%�&]�[�:̂�]X"N=���%�!��K+��)�7*��\#�;)�\;+(\)((C����\#�;)�\;+;\@),7��YYY\US�__U%U\NL<����

������HG����:I\Ha7,= ����̀ ��������HG����:I\Ha@;= ����̀ ���������HG���bI�K� ����Z�����I�J�

IG�

c ��H�:I\Z�(7=-�.�����/��R

-�0/�1/��d9:+)<<= d9:+)<<= +>9:@)<<=

H�e\@6�7f9:+,+,<<= H�e\@6�C9:+,�g<<=

Page: 7 of 10

TRACK: I.TR-LV-[LENGTH]-48-01 + 4451-0048-100-UNV-TD10 +

TRACK ACCESSORIES AS REQUIRED

LEDs BY MANUFACTURER HL1

Date:03/13/2020 jeff

Existing track by base building; 51mm/ 2" track heads, other than one per circuit provided by base building are by exhibits. See RCPs for layouts, quantities per color (black in Intro; white everywhere else) and whether spot, medium or elliptical lens; lamped 3000K/ 90CRI

-./012.34� �5�&�!"!��6�78%�7���8%��6��"!�9: "&�9:%!�9�:&;�-<=>/2>?4� �&@�9"�7:�%��:&���� "%!"!;�A@�&"B�8&"!*�9�%�C"� 9���:%��8�";�30D/12D.34� �EF� :G"&��� 6';�H�587�7�:@�),,I� "&��&�9J;�� ""�&"7:�"� :G"&��� 6'�: �8:%��:%� �K"�L;M2NN2>?4� ,�),F�!8778%K�: �8:%*��""�&"7:�"� :G"&��� 6'� !"��86��:%� �K"�L;O2>2PQ4�� �1.DR4�IS8�"�:&�C6�9J� �8%�"!�@8%8�S;�� �DD0PP<120P4�IS8�"�:&�C6�9J�9:6:&; 02?Q/4� ,;(6C�@��T,;�UJK�7V .11.>/W4� )�'"�&�6878�"!�G�&&�%�';�01/2X2D./2<>4� 9�����68��"!�@:&��&'�6:9��8:%

�:G�Y:6��K"��&�9J��'��"7�G8�S� &:@"��8:%�6�!8&"9�8:%�6�6�78%�8&"�@:&�9:77"&98�6��%!�&"�8!"%�8�6�� 689��8:%�;��S"�78%8���&"��EF��&�9J�8��!"�8K%"!�@:&�9"868%K*�G�66�:&� "%!�%��� 689��8:%�TG8�S��"7:�"� :G"&��� 6'V;�A!"�6�@:&�� 689��8:%�8%�"5S8C8�8:%�� �9"�*�&"��86*�S:� 8��68�'��%!�&"�8!"%9"�;�H�!"�:@� �8%�"!�"5�&�!"!��6�78%�7;��:�:C��8%�9:%�8%�:���68%"�*���&�8KS���%!�9:&%"&�Z:8%����&"��Y�86�C6"�G8�S��" �&��"�9:!"�;� �&:Z"9��#��' "# [\��]O]���]�̂ �[_�����K"#�)�:@�L

��"��:�9:%�8%�:���87 &:Y"7"%��*��S"�8%@:&7��8:%�S"&"8%�7�'�C"�9S�%K"!�G8�S:���%:�89"(̀+,�a:�6;� �����&"%�*���8�"�),,*�H:%�&b�6�Tc�bC"9V���%�!��d+��)�U*��;#�L)�;L+(;)((̀����;#�L)�;L+L;e),U��GGG;8K�ff8%8;9:7����g���h$���h� ��h��A������� g���h$���h� ��h��A�������

Page: 6 of 10

TRACK: I.TR-LV-[LENGTH]-48-01 + 4451-0048-100-UNV-TD10 +

TRACK ACCESSORIES AS REQUIRED

LEDs BY MANUFACTURER HL1

Date:03/13/2020 jeff

Existing track by base building; 51mm/ 2" track heads, other than one per circuit provided by base building are by exhibits. See RCPs for layouts, quantities per color (black in Intro; white everywhere else) and whether spot, medium or elliptical lens; lamped 3000K/ 90CRI

-� ���-�������-�� �� �&./"0��#��' "# 12��343���3�5�16�����7"#�8�.9�8

��"��.�0.%�:%�.���:; &.<";"%��*��="�:%9.&;��:.%�="&":%�;�'�>"�0=�%7"!�?:�=.���%.�:0"@(+,�A.�BC� �����&"%�*���:�"�),,*�D.%�&E�B�FG�E>"0H���%�!��I+��)�J*��C#�8)�C8+(C)((@����C#�8)�C8+8CK),J��???C:7�LL:%:C0.;����

�MN������O��35��354�PQRSTUVWXY�O��3Z��-�

��5��6 ������435316[Z\�-�F8,,;;H]̂�-��_̀a[�-�b=:�" cẐ�-�F(,,,;;H\Zd�-�F+,,,;;HeZe�-�F),,,;;H af�-�AB�0g��Y����2� ���1h22�i��2�3�5j���k����O���O�1�2������il�"m�:&";"%�#�D�n�),,b� "&��&�0g*��_̀� o�D:%:;�;�9:n��&"�B.�!�&"m�:&"!��.�:%���BB�.%��=:���&�0g�!&:<"&oo��B0�B��"!�9.&�)K�bp�0�>B"C��.%��0��9�0�.&'�9.&�B.%7"&�&";.�"�!:���%0"C q _rn�_rn��rF+,(�N�+,(N�),+;;Hc\ )+,�+JJ̀ (,9�F@;HM%!..&M%!..& �.%" �.?%��.s),t uvr�w�xr�w�xrF�8J�n�),+�n�),+;;H[aa )+,�+JJ̀ @_9�F(,;H,�),̀ q Krn��rn�(rF)8+�N�),+�N�JK;;Hyf )+,�+JJ̀ (,9�F@;H�.%" q Krn��rn�(rF)8+�N�),+�N�JK;;Hed )+,�+JJ̀ (,9�F@;HM%!..& �.%" Oz{{z|}~�|}� ���� ����� Oz{{z|}��~������ Oz{�|�z�| Y����z���|���� ����}� ]]]]-aa]̂-aed-h5 -5O]]da-aa]̂-ac\-h5 -5Oq )(rn�8rn�+rF((,�N�)+J�N�8);;Hfaa )+,�+JJ̀ (,9�F@;H���!..& �.%"�C_b q qq Yz|� ���� q ]d]\-aa]̂-faa-f�-h5 -5O]]d[-aa]̂-[aa-h5 -�O[a

]]]]-aa]̂-ayf-h5 -5O M%!..&

Page: 10 of 10

TRACK: I.TR-LV-[LENGTH]-48-01 + 4451-0048-100-UNV-TD10 +

TRACK ACCESSORIES AS REQUIRED

LEDs BY MANUFACTURER HL1

Date:03/13/2020 jeff Rectangle jeff Text Box see existing in place: black track in Intro and white track all other locations jeff

Existing track by base building; 51mm/ 2" track heads, other than one per circuit provided by base building are by exhibits. See RCPs for layouts, quantities per color (black in Intro; white everywhere else) and whether spot, medium or elliptical lens; lamped 3000K/ 90CRI

1 3 9 3 S O U T H S A N TA F E D R , D E N V E R , C O 8 0 2 2 3 • 1 - 8 8 8 - 8 8 7 - 2 9 8 0 • I N F O @ E V O - L I T E . C O M • W W W. E V O - L I T E . C O M

V 9 - 1 9 0 8 2 8 • S P E C I F I C AT I O N S S U B J E C T T O C H A N G E W I T H O U T N O T I F I C AT I O N 2 0 1 9 E V O - L I T E , L L C

**Color Temperature

Warm White (WW) 3000K Soft White (SW) 3500K Neutral White (NW) 4100K Pure White (PW) 5300K Ultra White (UW) 6300K Tunable White (TW) 2700K - 6500K Color Adjustable (RGB) Check availability for other color options

Mounting Examples Wall mounted with screws, Z-clips, U-channel, mirror clips or standoffs

Operating Temperature -30˚C (-22˚F) ~ +40˚C (+104˚F)

Environment Dry location only (Standard)

Thickness † 8MM (Standard), 6MM is also available depending on application

Minimum Size 2” W x 2” L x 5/16” D (50mm x 50mm x 8mm)

Maximum Size 59” W x 118” L x 5/16” D (1499mm x 2997mm x 8mm)

Weight 1.95 lbs/sq. ft. (8MM LGP)

9.54 kg/sq. M (8MM LGP)

** LED Kelvin temperatures listed in this literature have been derived from raw LED data.

Actual Kelvin ratings can vary +/- 200K based upon environmental conditions including but not limited to inclusion into LGPs and the use of diffusion materials. A precise ANSI bin control system is utilized to help maintain LED conformity and to minimize variances.

Static red, green, and blue options available.

† Please contact an Evo-Lite Integration Specialist if a thickness other than 8mm is desired.

Size (IN) Size (MM) LED Strip

*Avg Surface Brightness

(LUX)

Power Consumption (W)

6 x 6 150 x 150 1 side 6,000 2.0

12 x 12 300 x 300 1 side 3,000 4.0

24 x 24 600 x 600 2 sides 3,200 15.0

36 x 36 900 x 900 2 sides 2,600 23.0

48 x 48 1200 x 1200 2 sides 2,200 30.0

48 x 96 1200 x 2400 2 sides 2,200 60.0

Ø 6 Ø 150 all around 19,000 5.8

Ø 12 Ø 300 all around 13,000 11.2

Ø 24 Ø 600 all around 5,400 24.0

Ø 36 Ø 900 all around 4,500 36.0

Ø 48 Ø 1200 all around 3,500 48.0

*Brightness data was measured January 2015.

PHYSICAL

Custom Shapes •

Full Integration Support •

3D V-Cutting Techology •

High Brightness • (2,000 - 10,000 LUX)

Multi-Color Option •

Tunable White Option •

Consistent Light Quality •

Patented Heat Sink Technology •

Low Power Consumption • (70% Less than flourescent)

Energy Saving & Maintenance Free •

Advanced 3-Year Warranty •

BRIGHTNESS & POWER CONSUMPTION REFERENCE -

BASED ON 5300K LEDS

SPECIAL FEATURES

LED Light Panels are capable of full range (100% to off) light control when used with full range capable power & control components. Please contact Evo-Lite for optimal power & control solutions to fit your requirements.

POWER & CONTROLS

PROFILE OF LUMISHEET

Input Voltage 12 Volt DC - Constant Voltage; 24 Volt DC (Option)

Power Consumption 4.0 Watts/ft (single color LEDs)

5.0 Watts/ft (Tunable White and RGB LEDs)

Wire Size 20 AWG 2 wire (Standard LEDs) 20 AWG 3 wire (Tunable White LEDs) 22 AWG 4 wire (RGB LEDs)

Wiring Each panel must have direct connection to power supply.

Do not wire panels in series.

*Connector

2.1/5.5mm barrel plug (Standard White LEDs) [White Stripe / Center pin +]

3 pin molex / bare wires (Tunable White LEDs) [White - Power, Grey - Warm White, Black - Cool White]

No connector (RGB LEDs) Custom connection types available

Certification UL Listed (E346146) & UL Recognized (E362079) MRI Compliant – no ferrous metals

* Standard cord length 5’ (1500mm) & 10’ (3000mm). Custom length options available up to 20’.

ELECTRICAL

PRODUCT INTEGRATION ADVISORY

The use of adhesives of any type for the bonding of materials to LumiSheet or bonding LumiSheet to another surface is strongly discouraged.

Direct bonding can result in visual anomalies or failure of the Lumisheet panel which is not covered under warranty.

Be sure to remove clear protective film before installation.

QUICK SPECS // LED EDGELIT

LED Light Panel

TM

DIMMABLE

+−24V12V tel:+18888872980 mailto:info%40evo-lite.com?subject=Info%20regquest%20-%20LumiSheet http://www.evo-lite.com jeff

Case-integral LED laylights for standing glass cases @ Intro Exhibit

LUXAM

jeff

Case integral WHITE track and heads for standing glass cases (note also need one BLACK monopoint for lighting Flipbook in Intro Exhibit)

MINIATURE

A micro-sized and adjustable lighting system designed to highlight the objects displayed in a subtle and understated manner. Can be fitted neatly and discretely into showcase and exhibition structures.

jeff

Case integral WHITE track and heads for standing glass cases (note also need one BLACK monopoint for lighting Flipbook in Intro Exhibit)

DIMMER SWITCH

A dimmer switch is provided to adjust the lighting levels from one object to another, and from one type of material to another, while respecting artwork conservation standards.

jeff

Case integral WHITE track and heads for standing glass cases (note also need one BLACK monopoint for lighting Flipbook in Intro Exhibit)

ZOOM

Optical zoom function (7° to 60° open angle) to bring out and highlight the objects displayed in the most effective way possible.

60° 7°

Case integral WHITE track and heads for standing glass cases (note also need one BLACK monopoint for lighting Flipbook in Intro Exhibit)

TECHNICAL CHARACTERISTICS

• Voltage : DC12 V

• Power : 3,8 W

• Input current : 340 mA

• Dimmer : PWM, range 5-100%

• Electric Class : III

• Degree of protection : IP20

• Technology : LED

• Rotation angle : 90°

• Rotation angle : 355°

• Material : Aluminum/ABS

• Color : Black

• Lens : Glass BK7

• Beam angle : 7° to 60°

• CRI : 96

• Color temperature : WW : 3000 K - NW-4000 K

• Standard : CE jeff

Case integral WHITE track and heads for standing glass cases (note also need one BLACK monopoint for lighting Flipbook in Intro Exhibit)

Designation Ref:

Micro spot 3.8W L-MTSP-01 barndoors L-MTBD-01

H-shape micro Track (1m) L-MTHTK-100

Live end power connector for track L-MTEC-01 intermediate power connector L-MTIC-01 straight junction connector L-MTSJ-01

90° junction connector L-MTCJ-01

End cap L-MTCP-01

LED driver 12V/30W M-PLC-30

LED driver 12V/60W M-PLC-60

jeff

Case integral WHITE track and heads for standing glass cases (note also need one BLACK monopoint for lighting Flipbook in Intro Exhibit)

Project Name:

Catalog Number:

Type:

Date:

RR1-189-PAR8

Adjustable or Fixed Round Lipstick

Clarté Lighting Features

975 N. Todd Ave. Azusa, CA 91702 / t: (626) 261-4242 / f: (626) 598-3750 / clartelighting.com © Clarté Lighting - All Rights Reserved. Specifications Subject to Change Without Notice.

E492734

LED Source Details

• CREE XHP50 LED maximum rating = 1,500mA

• Fixture operating milliamp range = 300mA to 700mA.

• Operating 15% to 38% of rated value 20% to 47%

• Fixture wattage range = 5W to 17W

• Fixture delivered lumens = 500 to 1,150 lumens

Key Features

• 1.5” ID - 2.91” OD

• Adjustable up to 50°

• Adjustable Recessed or Semi-Recessed

• Fixed ½" Recessed Trimless

• 365° Rotation

• IC or NON IC version

• Remote Transformer Optoin

• .02” Uber Thin Trim Lip

• Over 10,000+ fixture custom color finish options

• 100,0000+ L70 life

Same Dimensions as Fixed

Fixed Wall WashFixed or Shower Trim 2.12”

2”

.5”

2”

2.91”

1.5” inner opening

3.5” 11W 14W

3” 5W 7W

4” 17W 15W

Same Dimensions as Fixed

Adjustable

Ø.75” Adjustable up to 45˚

Recessed with TrimTrimless ½" Recessed jeff Text Box Retrofit WHITE recessed Aimable LED with softener and linear spread lenses for lighting large pull-out books in Intro Section. Note use LED drivers behind fascia to power up using low voltage leads - see detail section jeff Rectangle

Rectangle

Clarté Lighting Ordering

Catalog Number:

Type:

Date:

(a) Driver

(b) Wattage

(c)

LED

RR1-189- -PAR8-

(d) Beam

(e) Snoot

(f ) Re�ector

(g) Mounting

(h) Housing

(i) Trim

(j) Accessories

(k) Options

(l) Chromaticity

Recessed Round 1”ID Trim - 1”OD Housing

RR1-189-PAR8

975 N. Todd Ave. Azusa, CA 91702 / t: (626) 261-4242 / f: (626) 598-3750 / clartelighting.com © Clarté Lighting - All Rights Reserved. Specifications Subject to Change Without Notice.

E492734

Adjustable or Fixed Round Lipstick

(a) Driver Options

E = ON/OFF (Electronic) D = MLV 1% Dimming (2 wire) DC12V = .01% PWM DC dimming (2 wire) DC24V = .01% PWM DC dimming (2 wire) ED = Electronic Reverse Phase Dimming 1% (2 wire) 0-10V1 = 0-10V 1% Dimming (3 wire) RDM DMX = 16 Bit, 4 Channel (2 wire with CAT5) ABS = Absolute Light .001% Dimming (use with RGBW)

(c) Lamp Type Options

X4LED = Cree XHP50 LED = 50+% brighter than XLED (available in spot, narrow flood, and flood)

(d) Beam Options

SP = Spot NFL = Narrow Flood FL = Flood

(e) Snoot Color Options

BLKS = Black Snoot WHTS = White Snoot PWTS = Pewter Snoot

(f) Reflector/Trim Lip Color Options

WHT/WHT = White Relfector/White Trim Lip WHT/BLK = White Relfector/Black Trim Lip BLK/BLK = Black Relfector/Black Trim Lip BLK/WHT = Black Relfector/White Trim Lip PWT/PWT = Pewter Reflector/Pewter Trim Lip PWT/WHT = Pewter Reflector/White Trim Lip PWT/WHT = Pewter Reflector/Black Trim Lip

(k) Options

RMT14 = 14Watt 12V AC MLV Step Down Transformer RMT60 = 60Watt 12V AC MLV Step Down Transformer RMT150 = 150Watt 12V AC MLV Step Down Transformer RMT300 = 300Watt 12V AC MLV Step Down Transformer

12V = DC

24V = DC

120V = 120VAC 60Hz (Standard) 230V = 230VAC 50Hz 277V = 277VAC 60Hz 347V = 347VAC 60Hz EMG = 90min Emergency Back-Up Battery TB = DMX 5-pin Plug-in Terminal Block RET* = Bi-pin whip to plug Clarté LED trim module into existing MLV transformed recessed halogen MR16 fixtures.

80+ = CRI over 80 90+ = CRI over 90 EXT = Exterior zinc primer with zinc infused paint

*Eliminate the need to install new 12V AC step down transformer, Clarté LED trim installs like changing a lamp.

(g) Mounting Options

ADJ = Adjustable FX = Fixed WOS = Wires Out the Side (reduces height by 0.5”) FWW = Fixed Wall Wash ST = Shower Trim

(h) Fixture Housing Options

Non-IC Rated:

RMT = No housing, no frame, remote transformer spring clip loaded trim NIC = Frame and juction box to be used with trim version

IC Rated:

AH = 8” x 8” Architectural housing to be used with trimmed or level plane installation

Colored/Themed LED UV365** = 365 NM UV black light UV390** = 390 NM UV black light Blue* = 465 - 485 NM wavelength Green* = 520 - 535 NM wavelength Amber* = 585 - 595NM wavelength Red* = 620 - 630 NM wavelength RGBW3K*** = Red, Green, Blue, White RGBW4K*** = Red, Green, Blue, White

**700 mA or less **Must utilize DMX fixture option

(l) Color Temperature Options

White LED 22K* = 2200 Kelvin (candlelight color) 27K = 2700 Kelvin (incandescent color) 30K = 3000 Kelvin (halogen color) 35K = 3500 Kelvin (warm incandescent) 40K = 4000 Kelvin (cool incandescent) 50K = 5000 Kelvin (day white) 65K = 6500 Kelvin (12 noon sunlight)

*1050 mA or less

(i) Trim Type

T = Trimmed T1 = Level Plane T2 = Trimless ½” Recessed MT = Micro Trim (½” smaller OD)

(b) Wattage Options

5W (500 Lumens) = ON/OFF, 0-10V 1%, ED* 7W (500 Lumens) = MLV <1% Dimming 10W (000 Lumens) = ABS 11W (525 Lumens) = ON/OFF, 0-10V 1%, ED* 14W (525 Lumens) = MLV <1% Dimming 15W (1150 Lumens) = ON/OFF, 0-10V 1%, ED* 17W (1150 Lumens) = MLV <1% Dimming, DMX

*Only with no accessories.

(j) Optical and Accessory Options

LS = Lens Softener - +20% increase in beam width. Shields optical face visually.

Softens edges of beam.

LSL = Linear Spread Lens - Horizontal or vertical beam elongation.

WFL = Wide Flood Lens - Wall washing increases the beam by 50% width with elimination of center beam.

H = Halogen - 100K warmer. 2700k to 2500K

DH = Dimmed Halogen - 400K warmer. 2700k to 2300K

CHL = Cross Hiar Louver

LV = Louver - Small black hexcel louver elimniates all surface brightness.

Creates stronger vertical cut off with -20% beam width.

jeff Rectangle jeff Rectangle jeff Text Box will need dimmed in the field jeff Rectangle jeff Rectangle jeff Rectangle jeff Text Box beam will need focused in the field jeff Rectangle jeff Rectangle jeff Rectangle jeff Rectangle jeff Rectangle jeff Rectangle jeff Rectangle jeff Text Box Note to wire to LED Driver already near at hand and powered up from existing outlet jeff Rectangle

Clarté Lighting Specifications

Catalog Number:

Type:

Date:

RR1-189-PAR8

Housing

• 100% aluminum construction

• IC housing with hinged 4” x 6” side access panel to j-box & LED driver

Electrical

• IC or NON-IC fixture housing

• Optional - 12V AC remote class 2

• Optional - 12V or 24 DC remote class 2

• 100V, 120V, 230V, 277V or 347V

LED

• 3,000 maximum milliamp rated CREE LED

• Operates between 450 to 1200 milliamps

• L70 life = 100,000 hr.+

LED Driver

• D – 2 wire forward phase .01% LED driver fade to off glow to on

• ED – 2 wire reverse phase 1% LED driver

• DC – 12V or 24V

• 0-10V – 3 wire 1% LED driver

• Absolute Light – Remote mount class 2 48V din rail .001% LED system

• 16-bit RMD DMX – 65,536 dimming steps fade to off glow to on

Optics

• TIR discrete injection molded polycarbonate precision LED optic

• 45-degree vertical cut off

Trim

• .02” thin trim lip

• Hydro form reflector - no spin marks

Trim Finish

• Specular Aluminum Anodized

• Matt Aluminum Anodized

• White, Black or Pewter Powder Coat Paint

• 3300+ Custom Power Coat Paint Colors

• 7000+ Custom Wet Paint Colors

Level Plane and Trimless Installation

• Available in ½” recessed trimless, trimless and level plane

Installation

• Accommodates ceiling thickness up to 2.5”

• Universal adjustable 24” adjustable hangar bars

Certification

• UL Damp Listed – IP 52 – Open trim

• UL Wet Listed – IP 65 – Lensed trim

Warranty

• 5 Year – ED, 0-10V, DMX and colored LED fixtures

• 7 Year – D and White LED fixtures

Non-IC: No Housing Remote Transformer Remodel - Trimmed

Non-IC: No Housing Framed Fixture with J-Box - Trimmed

IC: Architectural Housing - Trimless, Level Plane or 1/2” Recessed.

975 N. Todd Ave. Azusa, CA 91702 / t: (626) 261-4242 / f: (626) 598-3750 / clartelighting.com © Clarté Lighting - All Rights Reserved. Specifications Subject to Change Without Notice.

E492734

Adjustable or Fixed Round Lipstick

4 Trim Installation Options

Trim Trimless ½" RecessedLevel Plane jeff Rectangle

Anti-reflective low-iron safety glass for standing glass cases at Intro Exhibit – or equal by Casewerks jeff

H+R designed these cases for National Civil Rights Museum

SE Backlit graphic panels -

Lobby and Intro

ONE-SIDED SEC PROFILES

0 LIT

TWO-SIDED SEC PROFILES

0 411

WHAT IS SEG?

BACICUT

h~ L= ~

LEO CHART

BA6IILIT

ERCH

A silicone edge graphic is a high resolution, dye-sublimated fabric, finished with a thin silicone strip. The thin silicone edge is easily inserted into SEC Systems’ aluminum frames creating a clean, powerful look for any space.

Graphic Install

CORNERS

Afieirys begirr oath the canners. Start by :nselhrlg the up~r tell corner of the graphic and then work your way around Ifl a CioCKwrSe fashion.

SEC Benefits:

CENTERS

WOO the corners now squarely In place.

grab the center & the graphic along tIre lop edge and Insert intO the channel. Continue faire Pr same along each edge, ohiwys grabbing In he Center

FINISH

Coerrplrre the installation by inserting all renrairerm edges into tIre Chaisrr& Begin at the moron owl work your way 0111 towards Ike Corrrers on each side

-———-I——— I ——

4 il pare, erupt

:: a ,i~’ ~j, —~ L~j~F

SPECIALTY PROFILES A A A ‘‘

CO ER

ACCESSORIES

—— Us’ ir irrph,

— ri—Ill.

— 1.1 II:’

704.579.5800 SEGSYSTEMS.C0M SV.TEraS

— Seamless art

— Minimal wall prep

— Easy Installation

— Cost-saving

— Lightweight

— Environmentally stable

— Economic

— Compact shipping

— No glare

— Reusable

EURO5ION ARE DESIGRED FOR 3mm 014mm SILICORE EttEE

SYSTEMS 6345 Iorfttpark BIRd. sgjtj A- Charlgile MC 26216 I 704.579.5066 I www.SEGSYSTEMS.com jeff

SEG Backlit panels with stretched fabric graphic face for Lobby Exhibit Area

Backlighting LED for SEG (perimeter of frame)

BAC KIlT POSSIBILITIES BACKLIT POSSIBILITIES

Stand out from the crowd by adding lighting to your fabric frame. Don’t know where to start? When determining the best lighting for your SEG frame, there are five key factors to consider: environment, imagery, brightness, budget, and lifespan. Competing light sources in your current environment are important, as well as the imagery style you choose for your fabric and the brightness you wish to portray. Your budget and expected lifespan of the frame go hand-in-hand, and we will help guide the way when it is time to make a decision.

S

8.0’ ARCH

4.75” OUTSIDE

CORNER COUNTER ‘~

4.5”

FREESTANDING

CUSTOM SHAlE

RAID LIT

4.75”

SUSPENDED

RETRO PROGRAMMABLE

RGBW

L ~PRODUCT

GlORIFYING

SHELVING

1,n~r4~

One-Sided I Two-Sided •.‘,r11iTf4r”1~ .135 ~ftRc~ 80

HO ‘~11 HO ~EXTRUSION I 315 I 5 30 35 40 415

~‘_t F

REVERSE-LOAD

80 h

4-75”

WALL-MOUNT

MURAL

8.0”

CIRCULAR

SYSTEMS 6945 Norttiparit Bled, Suite A - Charlotte, NC 25210 I 704.519.5806 I www.SEGSYS1TNS.cwo SYSTEMS” 6845 Noethpark Bled, Suite A - Charlotte, NC 28216 I 704.578.5800 I ~w.SESSVSTENS.cum

1 . G E N E R A L

1.01 Scope

Furnish a vinyl wallcovering as speci�ed in the contract documents.

1.02 Sample

Submit a sample of each type and color to be installed for the architect’s approval.

1.03 Certi�cate of Compliance

Submit manufacturer’s certi�cation that wallcov-ering furnished meets or exceeds the architect’s speci�cation requirements.

1.04 Warranties

Furnish a written warranty against defective workmanship that may devel-op within one (1) year from date of installation and 5 years against manufacturing defects.

1.05 Product Delivery Storage

and Handling

Deliver vinyl wallcovering and adhesive to the job site in unbroken or undamaged containers and clearly marked with the supplier’s identi�ca-tion label. Store vinyl wallcoverings in a �at positionto avoid damage to rollends.Store materials in a clean, dry storage area with tem-perature maintained above 550F with normal humidity. DO NOT CROSS STACK THIS

MATERIAL.

1.06 Project Conditions

Areas where wallcovering will be installed shall have a constant minimum temperature of not less than 600F for at least seven days prior to and throughout installation period and for seven days thereafter.

2 . P R O D U C T S

2.01 Vinyl Wallcovering

Shall meet Federal Speci�cation CCC-W- 408A and the CFFA-W -101-D, Quality Standard for Vinyl Coated Fabric Wallcovering.

The wallcovering Type I,Type II or Type III desired shall be speci�ed.The vinyl wallcovering shall contain mildew inhibitors.

A rchitect’s Speci�cations

A r chitect’s Speci�cations

DP-04-3027A

Litho in U.S.A.

Koroseal Interior Products LLC., 3875 Embassy Parkway, Fairlawn, Ohio 44333 ® Koroseal Interior Products LLC.

©2005 Koroseal Interior Products LLC.

® Te�on is a registered trademark of E.I. duPont de Nemours & Co. (Inc.)

2.02 Vinyl Wallcovering

(Te�on® Protected)

Shall meet the requirements as listed in 2.01 and in addition have a 0.37 thick Te�on �lm factory-applied to the wallcovering surface.

2.03 Burning Characteristics

The manufacturer shall certify at the time of shipment that the materials furnished meet the published �ame spread and smoke development Fire Hazard Classi�cation Rating(s) of those products when tested according to ASTM-E84 Tunnel Test.

2.04 UL Label

All products shall be UL labeled assuring com-plete compliance with all speci�cations and requirements through continuous inspection by UL inspectors.

2.05 Fire Detection

Characteristics

The vin yl wallcovering shall contain the Early Warning E�ect formulation which provides earlywarning to potential �re conditions.The vinyl wallcovering shall contain thermoparticulating ingredients which,when heatedto approximately 3000F, emit a colorless,odorless vapor that activates ion-ization smoke detectors when installed according to manufacturer’s speci�cations.

Evidence of the Early Warning E�ect shall be based on the ASTM E603 standard guide for room �re experiments.

2.06 A dhesive

The adhesive used must be manufacturer’s rec-ommended adhesive and must contain mildew inhibitors.

2.0 7 P rimers The primer used must be manufacturer’s recom-mended primer.

jeff

Direct-printed vinyl wall covering for graphic panels, book spines, and other panels per GL schedule. Wallcovering texture ((Abaco Beach, Cheyenne or Artist's Canvas) TBD by sample proofs by fabricator

3 . E X E C U T I O N

3.01 Inspection

(a) Installer shall inspect all areas and conditions under which vinyl wallcoverings are to be installed. Installer shall notify the contrac-tor and architect in writing of any conditions detrimental to the proper and timely completion of the installation;work will proceed only when conditions have been corrected and accepted by the installer.

(b) Substrate shall be checked with a suitable “Moisture Meter”. Moisture shall not exceed 4%.

3.02 Surface Preparation

(a) Wall surfaces shall be free from defects and imperfections that could show through the finished covered surface.

(b) Sand-finished plaster shall be smoothed, cin-der or cement blocks shall be plastered, or otherwise rendered smooth,and old wallcover-ings shall be removed.

(c) For new drywall construction,manufactur-er’s recommended primer should be used before application of wallcovering for ease of future removal when redecorating.

(d) Glossy surfaces shall either be sanded to dull surface, or a coat of manufacturer’s recom-mended primer applied prior to installation of wallcovering.

(e) If there is any evidence of mildew, it must be removed and the wall surface treated to inhibit further mildew growth.

(f) All painted surfaces should be evaluated for the possibility of pigment bleed-through. If there is any possibility, a coat of sealer, recom-mended by the manufacturer, should be applied before application of the wallcovering.

(g) Do not install vinyl wallcovering over oil-based wood stains as a bleed-through may occur.

3.03 Installation

(a) Wallcovering shall be installed by experi-enced workers and contractors in strict accordance with the manufacturer’s printed instructions using vinyl wallcovering adhesive recommended by the manufacturer (WHEAT PASTE SHALL NOT BE USED). It is absolutely imperative that installer read the manufacturer’s instruction sheet in each roll before installing the vinyl wallcovering.

Permanent building light shall be available for installation.

(b) Installer, before cutting, shall examine pat-tern and color and determine that they are the correct pattern and color as specified.

(c) Installer shall install each roll in sequence starting with largest roll number and each strip in same sequence as cut from roll. If pattern is not random, examine for repeat design. Some patterns should be lined up,matched or reversed for best results. If necessary, trim sel-vage deep enough to assure color uniformity.

(d) After application of three strips, an inspec-tion should be made and if there are any variations in color or pattern which are felt to be excessive, the wallcovering distributor or manufacturer’s representative should be noti-fied for his inspection before any further wallcovering is installed.

(e) Always bring material six (6) inches around inside and outside corners being sure to fir into corners to avoid bridging or spanning.

(f) The wallcovering should be smoothed to the hanging surface with a stiff bristled sweep brush or a flexible broad-knife to eliminate air bubbles.

(g) Remove excess adhesive along finished seam immediately after each wallcovering strip is applied.Use of clean,warm water, a natural sponge and clean towels are recommended for this use. It is very important to change water often to maintain cleanliness.

3.04 Clean-up Completion

Upon completion of work, remove surplus materials, rubbish and debris, resulting from the wallcovering installation.Leave areas in neat, clean and orderly condition.

3875 Embassy Parkway Fairlawn, Ohio 44333 www.korographics.com

A rchitect’s Specifications

A rchitect’s Specifications jeff

Direct-printed vinyl wall covering for graphic panels, book spines, and other panels per GL schedule. Wallcovering texture ((Abaco Beach, Cheyenne or Artist's Canvas) TBD by sample proofs by fabricator

Floorscapes™ Clear Media 70 mil

The Ultraflex graphic floor category has been expanded with the introduction of Floorscapes ™, a 70 mil, 65 oz durable clear vinyl floor graphic media. The product was engineered for businesses interested in a smooth embossment floor media to support image clarity and color precision for brand consistency and custom graphics. Designed for digital and screen grand format printers, both solvent and UV curable, Floorscapes can be used stand alone or backed with adhesives. Graphic flooring is an exciting way to create visual interest in any location.

A custom floor design either dramatic or subtle can easily transform a space and compliment other digital graphic design elements such as wallcovering, ceiling and textile displays for endless application settings. Floorscapes™ is available in a clear smooth finish.

* Retail / POP * Trade Shows * Convention Centers

* Sports Arenas * Locker Rooms/Gymnasiums * Bar/Restaurants

* Movie Theaters * Museums * Anti Fatigue Mats

* Ad Specialty Industry * Wall to Wall Installs * Offices

Stand alone or backed with adhesives.

ENVIRONMENTAL

CONSIDERATIONS

APPLICATIONS

OPTIMUM PRINT

AND STORAGE

TEMPERATURE

RANGE

MATERIAL

THICKNESS

PRINT OPTIONS

Material temperature range for installation and application considerations is -15 to 160 degrees F. Although Floorscapes remains flexible in cold, shock cracking can occur.

65 to 110 degrees Fahrenheit

Printers Note: Cooler temperatures can slow the recovery rate for the material to lay flat, resulting in a “wavy” material lay down appearance. Slightly warming the material will quickly bring it to a relaxed state for optimum printing characteristics. For optimal results, allow Floorscapes to acclimate to room temperature prior to printing.

0.070” (70mil) base thickness

Floorscapes™ is designed for Digital and Screen Printing processes. Other processes may apply with customer approved testing results.

Floorscapes™ is best suited for second surface printing. Second surface printing is executed by printing the mirror image to the underside of the material, then applying a layer of white ink or a white backer.

Digital Printing: Flatbed and Roll to Roll printers that can print material thicker than 0.060” with solvent or UV inks are compatible with this media. For ink curing, it is recommended that the heat does not exceed 180 degrees F. Excessive heat from UV curing systems can cause a cupping effect on the material. Increasing the speed of the print carriage and/or decreasing number of passes will resolve excessive heat related issues.

Caution: Material can be damaged with excessive heat from curing or excessive bed temperature.

jeff

Reverse-printed CYMK on white vinyl on back of textured clear vinyl flooring for Shaw Neighborhood map in Legacy Exhibit. Also used with fine steel wool buffed "mist" finish for seamless graphic friezes in Legacy Exhibit.

WHITE BACKER The best application of white ink for image contrast is achieved with a direct print on UV printing equipment.

FINISHING Flatbed finishing equipment with reciprocating knives is recommended. The use of excessive heat from routing may cause the material to produce an undesirable edge.

Routing is not recommended for use with Floorscapes; however, Cold Steel Rule Die Cutting is approved.

TESTING DATA

120” x 60’ Roll

Typical Properties Clear (.070”) ASTM Method

Abrasion Resistance 0.10 mg F-1344 Coefficient of Friction C-1028 Clear 0.95 Dry

0.79 Wet

Specific Gravity 1.2 g/cc ASTM D 792 Tensile Strength 2900 PSI ASTM D 412 Elongation 250% ASTM D 412 Durometer Hardness 40 ShoreD ASTM D 2240 Brittle Point -32 °C ASTM D 746 -25.6 °F Oxygen Index 23.5 % ASTM D 2863

MATERIAL SIZES

Front-lit p Back-lit p Blockout p Flooring p Mesh p Textiles p Specialty p

Floorscapes™ Clear Media 70 mil

All statements, technical information and recommendations about Ultraflex products are based upon tests believed to be reliable but do not constitute a guarantee or warranty. All Ultraflex products are sold with the understanding that the purchaser has independently assumed responsibility in determining the suitability of such product for its purposes. +1/-2 variance is allowed on all specs.

Ultraflex Systems Inc.

1578 Sussex Turnpike, Bldg 4 Randolph, NJ 07869 P: (973)627-8608 F: (973)627-8506 Toll Free: (800)368-7858

Ultraflex Europe Limited Unit 15 Eltisley Business Park Abbotsley, Cambridgeshire

UK PE19 6TX

P: (44)1767-677-100 website: www.ultraflexeurope.com www.ultrafleXX.com Ultraflex Systems Inc.

Headquarters 6333 Pelican Creek Circle Riverview, FL 33578 P: (973)627-8608 F: (973)627-8506 04/2019 jeff

Reverse-printed CYMK on white vinyl on back of textured clear vinyl flooring for Shaw Neighborhood map in Legacy Exhibit. Also used with fine steel wool buffed "mist" finish for seamless graphic friezes in Legacy Exhibit.

.180x.210 TYP.

[4.6x5.3]

.50 [12.7]

1.00 [25.4]

4.38 [111.2] A

B C

D

SLIDE LENGTH

.63 [16.0]

Access Slot TYP.

.63 [16.0]

.50 [12.7] .180x.210

[4.6x5.3] TYP.

1.00 [25.4]

4.38 [111.1] A

B C

D

SLIDE LENGTH

SLIDE TRAVEL

Closed position flush or under

1.38 [35.1]

.75 [19.1]

MODEL 301

Low Profile, Over Travel Medium Duty, Non-Disconnect

Up to 175 lb.** [80 kg.] Capacity

Applications: EIA rack-mounted chassis, data processing, tele-communications and video racks, medical applications and electro/mechanical devices. This product is covered by U.S. and various foreign patents issued and/or pending.

Bright electro-zinc plating (C) or black zinc (CB) finish available

12"–28" [305 mm–711 mm]

Slide length + .88" [22 mm]

1.38" [35.1]

175 lbs.** [80 kg] per pair

.75" + .030/-.000 [19.1 mm + .76/-.00]

Side, bracket, or hard mounting

#8 pan head screw

Finish

Length Travel Height

Load Side Space

Mounting Hardware

** Load rating based on a 16" wide drawer cycled 10,000 times.

Part Number

Slide Length

Slide Travel

Load Rating lbs [kg] A B C D

301-12 12.00 [305]

12.88 [327]

[80]

5.88 [149.4]

10.25 [260.4]

10.75 [273.1]

301-14 14.00 [356]

14.88 [378]

[77]

7.88 [200.2]

12.25 [311.2]

12.75 [323.9]

301-16 16.00 [406]

16.88 [429]

[73]

9.88 [251.0]

14.25 [362.0]

14.75 [374.7]

301-18 18.00 [457]

18.88 [480]

[68]

8.38 [212.9]

11.88 [301.8]

16.25 [412.8]

16.75 [425.5]

301-20 20.00 [508]

20.88 [530]

[65]

9.38 [238.3]

13.88 [352.6]

18.25 [463.6]

18.75 [476.3]

301-22 22.00 [559]

22.88 [581]

[59]

10.38 [263.7]

15.88 [403.4]

20.25 [514.4]

20.75 [527.1]

301-24 24.00 [610]

24.88 [632]

[52]

11.38 [289.1]

17.88 [454.2]

22.25 [565.2]

22.75 [577.9]

301-26 26.00 [660]

26.88 [683]

[48]

12.38 [314.5]

19.88 [505.0]

24.25 [616.0]

24.75 [628.7]

301-28 28.00 [711]

28.88 [734]

[41]

13.38 [340.0]

21.88 [555.8]

26.25 [666.8]

26.75 [679.5] jeff

Commercial grade 150 lb plus-rated drawer slides for pull-out "big books" in Intro Exhibit

Copyright © 2007 Accuride International Inc. 3700-9218(9042)-MK019-R6-0507

Total Bracket Kits Required Optional Bracket Kit Part Number

10 Each 4180-0222-XE

Kit contains 4 each short mounting brackets and mounting hardware. Order 1 kit per pair of slides.

Bracket kit includes the following. See Figure 1.

4 short brackets Part number 4000-0180-CE 1 bracket hardware kit^ Part number 4180-0230-XE

(^Kit contains screws, hex-nuts, washers, and bar nuts)

Optional Mounting Bracket

Short Bracket Part Number

4000-0180-CE

4.51 [114.6]

Ref.

ACCURIDE INTERNATIONAL INC.

12311 Shoemaker Avenue Santa Fe Springs, CA 90670

TEL (562) 903-0200

FAX (562) 903-0208

www.accuride.com

Manufacturing, Engineering, and Sales United States • Germany • Japan • Mexico • United Kingdom • China

Instructions to Bracket Mount

1. To ensure proper operation of the slides, make certain that all bracket mounting screws are inserted so that the screw heads are inside the slides. (No washers on the inside of the slides.)

2. Using mounting kits and brackets, mount brackets to slide cabinet members (largest). For adjustment purposes, screw the back brackets on loosely.

3. Install slides into EIA rack with #10-32 screws (customer supplied) and secure with bar nuts. Rear adjustment is possible by aligning the back bracket. Do not tighten screws until final adjustment is made.

4. Mount slide drawer members (smallest) to the chassis.

Position slides 1/8" from the front edge of the chassis making sure both slides are parallel.

5. It may be necessary to use a hoist for positioning and aligning the chassis when the weight exceeds 50 lbs.

Check slide alignment by opening and closing the chassis.

Any sign of binding indicates lateral stress or misalignment.

6. Adjust slide position until movement is smooth. Tighten all screws and if necessary use more screws to secure slides and complete installation.

Distributor (D) Pack: All lengths are packaged 5 pair per box. Polybag includes one pair of slides packaged with slide mounting screws and installation instructions.

Bulk (P) Pack: Lengths 12"–18" 24 each per box Lengths 20"–28" 10 each per box

Optional bracket mounting kit (part number 4180-0222-XE) is ordered separately. Order 1 kit per pair of slides.

Specifications

Packaging

Slide Ordering InstructionsInstallation Instructions

Bar Nut

Customer Supplied #10-32 Mounting Screw

#8-32 Pan Head Screw

Hex-Nut

Flat Washer

Lock Washer

Short Bracket

Figure 1

Instructions to Hard Mount

1. Follow step 1 of "Bracket Mount" instructions.

2. With slides fully extended, install cabinet members using # 8 pan head screws through uncovered mounting slots.

Move intermediate members to allow access to remaining slots. Be sure slides are parallel.

3. Mount chassis members. Access covered mounting screw holes by moving the intermediate members away from you.

Leave all screws loose for future adjustment. Be sure slides are parallel.

4. Follow steps 5 and 6 of "Bracket Mount" instructions.

Complete your slide order for model 301 by specifying the following information:

Total Slides Required Slide Finish Slide Model Slide Length Optional Polybag Packaging (includes mounting screws)

10 Pair C 301 -18 D

Optional Hardware Kits—Ordered Separately

Slide members: Cold rolled steel Ball retainers: Cold rolled steel Ball bearings: Carburized steel

NOTE: Specifications, materials, prices, terms, and delivery are subject to change without notice.

Infrared laser beam motion detectors deployed in house tour at door openings

Specification Sheet

1. PRODUCT NAME

CertainTeed ToughGard® Rigid Liner Board with Enhanced Surface Fiber Glass Duct and Plenum Liner Insulation

2. MANUFACTURER

CertainTeed Corporation P.O. Box 860 Valley Forge, PA 19482-0105 Phone: 610-341-7000

800-233-8990 Fax: 610-341-7571 Fax-On-Demand: 800-947-0057 Website: www.certainteed.com

3. PRODUCT DESCRIPTION

Basic Use: ToughGard Rigid Liner

Board with Enhanced Surface is a high-quality acoustical and thermal board type insulation used primarily for lining the interior of HVAC sheet metal ducts and plenums to absorb unwanted crosstalk, equipment and air rush noise.

This product performs in most types of heating and cooling systems operating at velocities up to 6,000 fpm (30.5 m/s) and temperatures to 250˚F (121˚C).

Benefits: ToughGard Rigid Liner Board with Enhanced Surface improves energy efficiency by reducing heat gain or loss. The product can be precision cut using both manual and automatic cut-ting equipment, and is durable and easy to clean.

Composition and Materials: Com-posed of glass fibers firmly bonded together with a thermosetting resin into a rigid board-type insulation. The air-stream surface contains an EPA regis-tered antimicrobial agent, in order to reduce the potential of microbial growth that may affect this product. The antimicrobial properties are intended to only protect this product.

Limitations: Insulation should be kept clean and dry during shipping, stor-age, installation and system operation.

Sizes: Available sizes as noted in the table on the back. Contact CertainTeed for availability and mini-mum order quantities.

4. TECHNICAL DATA

Applicable Standards:

• Model Building Codes:

– (ICC)

• Material Standards:

ASTM C1071, Type II

• Fire Safety Standards:

– (NFPA 90A, NFPA 90B)

Fire Resistance:

• Fire Hazard Classification:

– (UL 723, ASTM E84, NFPA 255)

Max Flame Spread Index; 25 Max Smoke Developed Index; 50

• Limited Combustible:

– (NFPA 259)

< 3,500 BTU/lb.

Physical/Chemical Properties:

• Thermal Performance:

See Table below.

• Acoustical Performance:

See Table below.

• Operating Limits:

– Temperature: (ASTM C411)

Max. 250°F (121°C)

– Air Velocity: (ASTM C1071, UL 181)

Max. 5,000 fpm (25.4m/s)

ToughGard® Rigid Liner Board with Enhanced Surface

THERMAL PERFORMANCE

Product K-Value C-Value R-Value

Thickness Btu•in W Btu W h•ft.2•°F m2•°C

in. mm h•ft.2•°F m•°C h•ft.2•°F m2•°C Btu W

1 25 0.23 1.31 4.3 0.77

11⁄2 38 0.23 0.033 0.15 0.87 6.5 1.15

2 51 0.12 0.65 8.7 1.53

Thermal conductance (C) and resistance (R) values are derived from the material thermal conductivity (k) value.

Tested in accordance with ASTM C518 and/or ASTM C177 at 75°F (24°C) mean temperature.

ACOUSTICAL PERFORMANCE

Product Absorption Coefficients @ Octave Band Frequencies (Hz)

Thickness

in. mm

125 250 500 1000 2000 4000 NRC

1 25 0.07 0.28 0.71 0.90 0.93 0.93 0.70

11⁄2 38 0.10 0.