Attachment16_CAWO_Media_Cutsheets.pdf

CAWO

Dr. Carter Woodson Home National Historic Site

PRODUCTION DOCUMENTS II

MEDIA CUTSHEETS

January 29, 2021

Prepared by Howard+Revis in collaboration with Mills + Schnoering Architects, LLC, for the National Park Service and the Association for the Study of African American Life and History

901 2nd Street NE Washington, DC 20002 www.howardrevis.com

Attachment 16_CAWO Media Cutsheets

AV Equipment List

NPS CAWO

1/27/21

Description Manufacturer Model Qty

EP-01.06-002 AD for Media Pieces Description Server - Listen EVERYWHERE 4 chan server Listen LW-200P-04 1 Location triggers, iBeacon Accent Systems iBKS 105 12

EP-01.06-003 ALS

Wireless Bodypack Transmitter Shure ULXD1 2 Headset Microphone Shure SM31FH 2 Wireless Microphone Rechargeable Battery Shure SB900A 2 Wireless Microphone Charging Station Shure SBC200-US 1 Wireless Microphone Receiver Shure ULXD4D 1 WM Antenna Shure UA874 4 WM Antenna Splitter Shure UA844 1 1/2 Wave RF Antenna Shure UA8 16 RF Antenna Combiner RF Venue 4 ZONE 2 RF Splitter RF Venue 2x1 Split 2 RF Band-pass Filter RF Venue Band-Pass Filter 2 Low-loss RF Antenna Cable, non-plenum, 1000' spool Times Microwave LMR-400 3 antenna plates AR AR 16 Listen IR System (includes Transmitter, 2 receivers, 2 neckloops, charger, and 2 in-ear headsets Listen LS-90 1 ALS IR Transmitter/Radiator Listen LT-84 6 ALS IR Radiator Listen LT-141 3 Cable and Misc AR AR 1

EP-02.05 Windows on Woodson 75" Displays Sharp PN-HM751 2 Display mount Chief MTMP1U 2

1/27/21

Media Player Brightsign XT1144 2 Brightsign Memory Card Brightsign SDHC-16C10-1 2 Video Tx Extron DTP T HD2 4K 230 2 Video Rx Extron DTP R HWP 4K 231 D 2 Focused ceiling recessed speaker - white Dakota FA-602W 1 5" Touchscreen Crestron TSW-570-W-S 1 Cabling and misc 1

EP-03.03 Office Ambient Soundscape 19" 5:4 Monitor Mimo M19024-OF 1 Mount Chief FSR100 1 Media Player Brightsign XT1144 1 On Desk speaker JBL Control 52 1 Under Desk speaker JBL Control 23-IL 1 Video Tx Extron DTP T HD2 4K 230 1 Video Rx Extron DTP R HWP 4K 231 D 1 Buttons, etc 1 Cable and Misc 1

EP-03.06 Woodson at Work Film Projector Epson EF-100W 1 Mount TBD TBD 1 Media Player Brightsign XT1144 1 Brightsign Memory Card Brightsign SDHC-16C10-1 1 Video Tx Extron DTP T HD2 4K 230 1 Video Rx Extron DTP R HWP 4K 231 D 1 On Desk speaker JBL Control 52 1 Under Desk speaker JBL Control 23-IL 1 Buttons, etc 1 Cable and Misc 1

EP-03.08 Kitchen Ambient Soundscape

1/27/21

19" 5:4 Monitor Mimo M19024-OF 1 Mount Chief FSR100 1 Media Player Brightsign XT1144 1 Brightsign Memory Card Brightsign SDHC-16C10-1 1 Video Tx Extron DTP T HD2 4K 230 1 Video Rx Extron DTP R HWP 4K 231 D 1 Kitchen Speaker JBL Control 5 (Sold as pair) 2 Ceiling Speakers JBL Control 26CT 1 Buttons, etc TBD TBD 1 Cabling and misc 1

EP-03.10 In Memoriam Narrated Quotes 19" 5:4 Monitor Mimo M19024-OF 1 Mount Chief FSR100 1 Media Player Brightsign XT1144 1 Brightsign Memory Card Brightsign SDHC-16C10-1 1 Video Tx Extron DTP T HD2 4K 230 1 Video Rx Extron DTP R HWP 4K 231 D 1 Speakers JBL Control 26CT 2 Buttons, etc TBD TBD 1 Cabling and misc 1

EP-04.01-001 Legacy Introduction: Woodson Projection Ultra short Projector Viewsonic LS810 1 Ceiling Plate Chief CMA110 1 Projector Mount Chief VCT000B 1 Media Player Brightsign XT1144 1 Brightsign Memory Card Brightsign SDHC-16C10-1 1 Video Tx Extron DTP T HD2 4K 230 1 Video Rx Extron DTP R HWP 4K 231 D 1 transducer speakers Soliddrive SD1 2

1/27/21

Buttons, etc TBD TBD 1 Cabling and misc 1

EP-04.02-001 History Rewritten Interactive 40" Touchscreen NEC V404T 1 Mount Chief MPWUB 1 Video Tx Extron DTP T HD2 4K 230 1 Video Rx Extron DTP R HWP 4K 231 D 1 Computer Mini PC TBD 1

Audio Headset

M.O.L.I.T.O.R. VIA WITH TABLETOP BASE AND

SPRING-LOADED VIA

AUTOMATIC CABLE

RETRACTION 2

headphone amp Vista VCX-150 2 Volume control rocker switch E-Switch RB1 2 Storm Nav-bar Storm EZB6-73002 1 Storm Audio Module Storm EZB2-50500 1 USB Extender Pair Crestron USB-EXT-2 KIT 1 Cabling and misc 1

EP-04.03-001 Education Expanded Interactive 40" Touchscreen NEC V404T 1 Mount Chief MPWUB 1 Video Tx Extron DTP T HD2 4K 230 1 Video Rx Extron DTP R HWP 4K 231 D 1 Computer Mini PC TBD 1

Audio Headset

M.O.L.I.T.O.R. VIA WITH TABLETOP BASE AND

SPRING-LOADED VIA

AUTOMATIC CABLE

RETRACTION 2

headphone amp Vista VCX-150 2 Volume control rocker switch E-Switch RB1 2

1/27/21

Storm Nav-bar Storm EZB6-73002 1 Storm Audio Module Storm EZB2-50500 1 USB Extender Pair Crestron USB-EXT-2 KIT 1 Cabling and misc 1

EP-04.04-001 Rights Demanded Interactive 40" Touchscreen NEC V404T 1 Mount Chief MPWUB 1 Video Tx Extron DTP T HD2 4K 230 1 Video Rx Extron DTP R HWP 4K 231 D 1 Computer Mini PC TBD 1

Audio Headset

M.O.L.I.T.O.R. VIA WITH TABLETOP BASE AND

SPRING-LOADED VIA

AUTOMATIC CABLE

RETRACTION 2

headphone amp Vista VCX-150 2 Volume control rocker switch E-Switch RB1 2 Storm Nav-bar Storm EZB6-73002 1 Storm Audio Module Storm EZB2-50500 1 USB Extender Pair Crestron USB-EXT-2 KIT 1 Cabling and misc 1

EP-04.05-001 Black Institutions Built Interactive 40" Touchscreen NEC V404T 1 Mount Chief MPWUB 1 Video Tx Extron DTP T HD2 4K 230 1 Video Rx Extron DTP R HWP 4K 231 D 1 Computer Mini PC TBD 1

1/27/21

Audio Headset

M.O.L.I.T.O.R. VIA WITH TABLETOP BASE AND

SPRING-LOADED VIA

AUTOMATIC CABLE

RETRACTION 2

headphone amp Vista VCX-150 2 Volume control rocker switch E-Switch RB1 2 Storm Nav-bar Storm EZB6-73002 1 Storm Audio Module Storm EZB2-50500 1 USB Extender Pair Crestron USB-EXT-2 KIT 1 Cabling and misc 1

EP-04.06-001 Communities Strengthened Interactive 40" Touchscreen NEC V404T 1 Mount Chief MPWUB 1 Video Tx Extron DTP T HD2 4K 230 1 Video Rx Extron DTP R HWP 4K 231 D 1 Computer Mini PC TBD 1

Audio Headset

M.O.L.I.T.O.R. VIA WITH TABLETOP BASE AND

SPRING-LOADED VIA

AUTOMATIC CABLE

RETRACTION 2

headphone amp Vista VCX-150 2 Volume control rocker switch E-Switch RB1 2 Storm Nav-bar Storm EZB6-73002 1 Storm Audio Module Storm EZB2-50500 1 USB Extender Pair Crestron USB-EXT-2 1 Cabling and misc 1

EP-04.07-001 Building Preserved Interactive 40" Touchscreen NEC V404T 1 Mount Chief MPWUB 1

1/27/21

Video Tx Extron DTP T HD2 4K 230 1 Video Rx Extron DTP R HWP 4K 231 D 1 Computer Mini PC TBD 1

Audio Headset

M.O.L.I.T.O.R. VIA WITH TABLETOP BASE AND

SPRING-LOADED VIA

AUTOMATIC CABLE

RETRACTION 2

headphone amp Vista VCX-150 2 Volume control rocker switch E-Switch RB1 2 Storm Nav-bar Storm EZB6-73002 1 Storm Audio Module Storm EZB2-50500 1 USB Extender Pair Crestron USB-EXT-2 KIT 1 Cabling and misc 1

Shared DSP QSC Core 510i CTO 1 Input Cards QSC CIML4 4 Output Cards QSC COL4 4 Audio I/O QSC I/O 8 Flex 1 Scripting License QSC SL-QSE-510-P 1 UI License QSC SL-QUD-510-P 1 control processor Crestron AV3 1 Crestron 16 port IO Cards Crestron C3IO16 1 4 chan amplifier QSC SPA4-60 2 2 chan amplifier QSC SPA2-60 1 10" Touchscreen Crestron TSW-1070-B-S 1

Programming PC HP HP EliteDesk 800 G5 Desktop Mini PC - 7LJ66UT#ABA 1

44 RU 32" Deep Rack Middle Atlantic BGR-4132 2 Rack Accessories A/R 2 1500w UPS APC SMT1500RM2UC 1

KVM NTI UNIMUX-HD4K-16 1

KVM Cables - Lot - A/R NTI TBD 1

1/27/21

24" 4K Rack monitor LG 24UD58-B 1 Monitor Rack Mount Middle Atlantic RM-LCD-PNLK 1 Rack mouse and keyboard Middle Atlantic RM-KB 1 Power Injector TBD TBD 2 48 port Network switch Netgear GS750E 1 Cables and misc 1

Total Watts in rack

Total Equipment and Materials

Spares Package 75" Displays Sharp PN-HM751 1 40" Monitor (Spare) NEC V404T 1 Projector (Spare) Epson EF-100W 1 Ultra short Projector Viewsonic LS810 1 19" 5:4 Monitor (Spare) Mimo M19024-OF 1

USO WITH TABLETOP BASE AND SPRING-LOADED VIA

AUTOMATIC CABLE RETRACTION (Spare)

M.O.L.I.T.O.R. white

Media Player (Spare) Brightsign XT1144 2 headphone amp (Spare) RDL EZ-HA4B 1 Storm Nav-bar (Spare) Storm EZB6-73002 2 Storm Audio Module (Spare) Storm EZB2-50500 1 USB Extender Pair (Spare) Crestron USB-EXT-2 KIT 1 Volume control rocker switch (Spare) E-Switch RB1 2 Wireless Microphone Rechargeable Battery (Spare) Shure SB900A 2 Headset Microphone Shure SM31FH 2

Operation Manual

Smart-UPS™

Uninterruptible Power Supply

750/1000/1500/2200/3000 VA

Tower / Rack-Mount 2U

120 Vac/230 Vac su1011a

Important Safety Messages SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed during installation and maintenance of the UPS and batteries.

Read the instructions carefully. Become familiar with the device before trying to install, operate, service or maintain it. The following special messages may appear throughout this document or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.

The addition of this symbol to a Danger or Warning product safety label indicates that an electrical hazard exists that will result in personal injury if the instructions are not followed.

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

Product Handling Guidelines

DANGER

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE

NOTICE is used to address practices not related to physical injury.

<18 kg <40 lb

18-32 kg 40-70 lb

32-55 kg 70-120 lb

>55 kg >120 lb Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U 1

Safety and General Information Inspect the package contents upon receipt.

Notify the carrier and dealer if there is any damage.

• Adhere to all national and local electrical codes.

• All wiring must be performed by a qualified electrician.

• Changes and modifications to this unit not expressly approved by APC by Schneider Electric could void the warranty.

• This UPS is intended for indoor use only.

• Do not operate this unit in direct sunlight, in contact with fluids, or where there is excessive dust or humidity.

• Be sure the air vents on the UPS are not blocked. Allow adequate space for proper ventilation.

• For a UPS with a factory installed power cord, connect the UPS power cable directly to a wall outlet. Do not use surge protectors or extension cords.

• The equipment is heavy. Always practice safe lifting techniques adequate for the weight of the equipment.

Deenergizing safety

The UPS contains internal batteries and may present a shock hazard even when disconnected from the branch circuit (mains). Before installing or servicing the equipment check that the:

• Input circuit breaker is in the OFF position.

• Internal UPS batteries are removed.

Electrical safety

• Use tools with insulated handles.

• Do not handle any metallic connector before power has been disconnected.

• For models with a hardwired input, the connection to the branch circuit (mains) must be performed by a qualified electrician.

• 230 V models only: In order to maintain compliance with the EMC directive for products sold in Europe, output cords attached to the UPS must not exceed 10 meters in length.

• The protective earth conductor for the UPS carries the leakage current from the load devices (computer equipment). An insulated ground conductor is to be installed as part of the branch circuit that supplies the UPS. The conductor must have the same size and insulation material as the grounded and ungrounded branch circuit supply conductors. The conductor will typically be green, with or without a yellow stripe.

• Leakage current for a pluggable, Type A UPS may exceed 3.5 mA when a separate ground terminal is used.

• The UPS input ground conductor must be properly bonded to protective earth at the service panel.

• If the UPS input power is supplied by a separately derived system, the ground conductor must be properly bonded at the supply transformer or motor generator set.

Hardwire safety

• Check that all branch circuit (mains) and low voltage (control) circuits are deenergized, and locked out before installing cables or making connections, whether in the junction box or to the UPS.

• Wiring by a qualified electrician is required.

• Check national and local codes before wiring.

• Strain relief is required for all hardwiring (supplied with select products). Snap in type strain reliefs are recommended.

• All openings that allow access to UPS hardwire terminals must be covered. Failure to do so may result in personal injury or equipment damage.

• Select wire size and connectors according to national and local codes.

Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U2

Battery safety

• When replacing batteries, replace with the same number and type.

• The batteries typically last for two to five years. Environmental factors impact battery life. Elevated ambient temperatures, poor quality utility power, and frequent short duration discharges will shorten battery life. The battery should be replaced before end of life.

• Replace the batteries immediately when the unit indicates battery replacement is necessary.

• APC by Schneider Electric uses sealed lead acid batteries. Under normal use and handling, there is no contact with the internal components of the battery. Over charging, over heating or other misuse of batteries can result in a discharge of battery electrolyte. Released electrolyte is toxic and may be harmful to the skin and eyes.

• CAUTION: Before installing or replacing the batteries, remove jewelry such as wristwatches and rings.

High short circuit current through conductive materials could cause severe burns.

• CAUTION: Do not dispose of batteries in a fire. The batteries may explode.

• CAUTION: Do not open or mutilate batteries. Released material is harmful to the skin and eyes and may be toxic.

General information

• The model and serial numbers are located on a small, rear panel label. For some models, an additional label is located on the chassis under the front bezel.

• Always recycle used batteries.

• Recycle the package materials or save them for reuse.

FCC Class A radio frequency warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are intended to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

WARNING: This is a category C2 UPS product. In a residential environment, this product may cause radio interference, in which case the user may be required to take additional measures.

Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U 3

Specifications For additional specifications, refer to the APC Web site at www.apc.com.

Environmental specifications

SMT750RM2UC and SMT750RMI2UC Rack-Mount SMT750C and SMT750IC Tower

SMT1000RM2UC, SMT1000RMI2UC, SMT1500RM2UC and SMT1500RMI2UC Rack-Mount

SMT1000C, SMT1000IC, SMT1500C and SMT1500IC Tower

SMT2200RM2UC, SMT2200RMI2UC. SMT3000RM2UC and SMT3000RMI2UC Rack-Mount

SMT2200C, SMT2200IC, SMT3000C and SMT3000IC Tower

Temperature Operating 0° to 40° C (32° to 104° F)

Storage -15° to 45° C (5° to 113° F) charge UPS battery every six months

Maximum Elevation Operating 3,000 m (10,000 ft)

Storage 15,000 m (50,000 ft)

Humidity 0% to 95% relative humidity, non-condensing su0987a su0988a su0957a su1001a su1002a Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U4

Product Overview =SMT750RM2UC and SMT750RMI2UC Rack-Mount SMT750C and SMT750IC Tower

SMT1000RM2UC, SMT1000RMI2UC,

SMT1500RM2UC and SMT1500RMI2UC Rack-Mount

SMT1000C and SMT1000IC Tower

SMT1500C and SMT1500IC Tower SMT2200C, SMT2200IC, SMT3000C and SMT3000IC Tower

SMT2200RM2UC, SMT2200RMI2UC, SMT3000RM2UC and SMT3000RMI2UC Rack-Mount su0989a su0990a su 0966a su0991a su0967a su1006a su1005a

Display (more information below)

Bezel

Battery

Internal battery connector Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U 5

Front panel display features

Rear panel features

Online LED

UPS ON/OFF

On Battery LED

Error Detected LED

Replace Battery LED

Multi-lingual display screen

UP/DOWN Selection arrows

ENTER

ESCAPE

SMT750RM2UC Rack-Mount

SMT750RMI2UC Rack-Mount su0343a

APC By Schneider

Electric

APC™ SmartConnect port

Serial port

USB port

Chassis ground connection screw

Smart Slot

Output circuit breaker/overload protection

Controlled outlet group

Outlets

UPS input

Battery connector (located on the front panel of rack-mount models)

Input circuit breaker

EPO connector

LINK/ACT

NETWORK

su0985b

LINK/ACT

NETWORK

su0985c Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U6

SMT1000RM2UC and SMT1500RM2UC Rack-Mount

SMT1000RMI2UC and SMT1500RMI2UC Rack-Mount

SMT2200RM2UC and SMT3000RM2UC Rack-Mount

SMT2200RMI2UC and SMT3000RMI2UC Rack-Mount

LINK/ACT

NETWORK

su0963b su0963c su1010b

LINK/ACT

NETWORK

SMT3000RM2UC

su1010c Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U 7

SMT750C Tower SMT750IC Tower

SMT1000C and SMT1500C Tower SMT1000IC and SMT1500IC Tower

LINK/ACT

NETWORK

su0986b su0986c

LINK/ACT

NETWORK

su0962b su0962c Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U8

Dimensions and weights

SMT2200C and SMT3000C Tower SMT2200IC and SMT3000IC Tower

SMT750C, SMT750IC, SMT1000C, SMT1000IC,

SMT1500C and SMT1500IC Tower Models

SMT750RM2UC, SMT750RMI2UC, SMT1000RM2UC,

SMT1000RMI2UC, SMT1500RM2UC and SMT1500RMI2UC Rack-Mount Models su1009b

LI

N

K /A

C T

N E T W

O R

K

SMT3000C

su1009c su0965a su0964a Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U 9

SMT2200C, SMT2200IC, SMT3000C and SMT3000IC Tower Models

SMT2200RM2UC, SMT2200RMI2UC, SMT3000RM2UC and SMT3000RMI2UC Rack-Mount Models su1003a su1004a

Model Dimensions (in/mm) H x W x D Weight (lb / kg)

SMT750C 6.3 x 5.4 x 14.5 in (161 x 138 x 369 mm) 27.6 / 12.5

SMT1000C

8.6 x 6.7 x 17.3 in (219 x 171 x 439 mm)

44.3 / 20.1

SMT1500C 54.2 / 24.6

SMT2200C

17 x 7.7 x 21.4 in (435 x 197 x 544 mm)

112.2 / 50.9

SMT3000C 116.2 / 52.7

SMT750RM2UC 3.4 x 17 x 16 in (86 x 432 x 409 mm) 39 / 17.7

SMT1000RM2UC

3.4 x 17 x 18.8 in (86 x 432 x 477 mm)

55.8 / 25.3

SMT1500RM2UC 58.4 / 26.5

SMT2200RM2UC

3.4 x 17 x 26.9 in(86 x 432 x 683 mm)

93.2 / 42.3

SMT3000RM2UC 97.7 / 44.3

Model Dimensions (in/mm) H x W x D Weight (lb / kg)

SMT750IC 6.3 x 5.4 x 14.5 in (161 x 138 x 369 mm) 26 / 11.8

SMT1000IC

8.6 x 6.7 x 17.3 in (219 x 171 x 439 mm)

42.8 / 19.4

SMT1500IC 53.1 / 24.1

SMT2200IC

17 x 7.7 x 21.4 in (435 x 197 x 544 mm)

110.6 / 50.2

SMT3000IC 115.7 / 52.5

SMT750RMI2UC 3.4 x 17 x 16 in (86 x 432 x 409 mm) 35.6 / 16.6

SMT1000RMI2UC

3.4 x 17 x 18.8 in (86 x 432 x 477 mm)

49.6 / 22.5

SMT1500RMI2UC 57.5 / 26.1

SMT2200RMI2UC

3.4 x 17 x 26.9 in(86 x 432 x 683 mm)

93.2 / 42.3

SMT3000RMI2UC 97.7 / 44.3

Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U10

Installation For UPS installation information, refer to the Installation Guide included with the UPS.

The Installation Guide is also available on the Documentation CD included with the UPS and on the APC by Schneider Electric Web site, www.apc.com.

Placement

The UPS is intended for IT environments. Avoid placement where there is excessive dust, temperature and humidity. Note that temperature in excess of 25o C may have an adverse effect on battery and UPS life. All vents on the side or rear of the UPS should be free of obstructions.

The UPS is heavy. For rack-mount units it is suggested that the batteries be removed for easier installation. The UPS should be placed near the bottom of the rack.

Connect to equipment and utilities

Note: The UPS will charge to 90% capacity in the first three hours of normal operation.

Do not expect full battery runtime capability during this initial charge period.

1. Connect equipment to the outlets in the rear of the UPS. Some models are equipped with controlled outlet groups. Refer to the “Configuration” section of this manual for further instructions on the use of controlled outlet groups.

2. Connect the APC™ SmartConnect port to your nearest network switch using the cable provided.

3. Connect the UPS input to AC power.

Note: Once power is connected the display will be active.

4. Press the main power button on the UPS display to turn on the UPS output.

Note: The On-line LED will light green when the output is on.

5. When the UPS is powered on for the first time the LCD screen displays the Setup Wizard and asks a number of basic set-up questions. They can be answered simply by using the arrow and enter keys on the display.

6. Log onto www.smartconnect.apc.com or scan the QR code to launch the registration process. The website includes instructions to setup your online account, activate your warranty and begin managing your UPS remotely.

CAUTION

RISK OF DAMAGE TO EQUIPMENT OR PERSONNEL

• Adhere to all local and national electrical codes.

• Wiring should be performed by qualified electrician.

• Always connect the UPS to a grounded outlet.

Failure to follow these instructions can result in injury.

LINK/ACT

NETW ORK

su0968a Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U 11

SMT750RM2UC and SMT750RMI2UC Rack-Mount Models

SMT1000RM2UC, SMT1000RMI2UC, SMT1500RM2UC and SMT1500RMI2UC Rack-Mount Models

LINK/ACT

NETW ORK

su0968c

SMT750RMI2UC

LINK/ACT

NETW ORK

su0968b

SMT1000RMI2UC and

SMT1500RMI2UC

Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U12

SMT2200RM2UC, SMT2200RMI2UC, SMT3000RM2UC and SMT3000RMI2UC Rack-Mount Models

SMT750C and SMT750IC Tower Models su1007b

LINK/ACT

NETWORK

LINK/ACT

NETWORK

SMT2200RMI2UC and SMT3000RMI2UC

LINK/ACT

NETWORK

SMT750IC

su0441e Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U 13

Note: By connecting this product to the Internet using the APC SmartConnect port, you are agreeing to APC SmartConnect Terms of Use, as found at smartconnect.apc.com. Schneider Electric Data Privacy Policy can also be found at smartconnect.apc.com.

SMT1000C, SMT1000IC, SMT15000C and SMT1500IC Tower Models

SMT2200C, SMT2200IC, SMT3000C and SMT3000IC Tower Models su0441d

LINK/ACT

NETWORK

SMT1000IC and

SMT1500IC

su1008b

L

IN

K /A

C T

N E

T W

O R

K

LIN

K

/A C

T

N E

T W

O R

K

SMT2200IC and

SMT3000IC

Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U14

Start up Settings When the UPS is powered on for the first time the display interface displays the Setup Wizard to configure the start up settings. Configuration can also be performed using PowerChute™ software.

Note: If the start up settings asked by the Setup Wizard are not selected completely, turning on UPS output is prohibited. If the UPS output is turned on, the Setup Wizard will be displayed again to complete the configuration of the start up settings.

Connect and Install Management Software

Smart-UPS is provided with PowerChute management software for unattended operating system shutdown, UPS monitoring, UPS control and energy reporting. The following diagram is a representation of a typical server installation.

Function Factory Default Options Description

Language English English French* German* Spanish* Italian* Portuguese* Japanese*

The language for the display interface.

*Language options will vary by model.

Local Power Quality

Good Good Fair Poor

Select the quality of input AC power.

• If Good is selected, the unit will go on battery power more often to provide the cleanest power supply to the connected equipment.

• If Poor is selected, the UPS will tolerate more fluctuations in power and will go on battery power less often.

If unsure of the local power quality, select Good.

Menu Type Standard Standard Advanced

The standard menu displays the most commonly required menus for most users. The advanced menus include all parameters.

Today’s Date Manufacture date

Use the arrows to enter today’s day, and the to complete the settings.

1 . Connect the USB cable from the rear of the UPS to the protected device such as a server.

2 . For a server or other device with an operating system, install the latest version of the PowerChute Business Edition from www.apc.com and follow the on-screen set-up instructions.

PowerChute provides for graceful shutdown in the event of an extended power outage and is a powerful management interface on the local network.

3 . A built-in serial port is also available for additional communication options with an optional serial cable.

For more detailed information on supported protocols and options refer to application note #181 at www.apc.com.

4 . Even more communication options are available via the built-in Smartslot.

Refer to www.apc.com for more information.

LINK/ACT

NETWORK

OR

Download and install the latest version of PowerChute Business Edition from http://www.apc.com/pcbe su0969h Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U 15

Operation Using the display

These Smart-UPS models are equipped with an intuitive and configurable LCD display. This display complements the software interface as they convey similar information and either may be used to configure the UPS settings.

The display consists of the following keys and indicators:

The display has two main display/menu options – standard and advanced.

Note: The standard menu is the default setting and does not contain all of the menus and attributes of the advanced menu. The advanced menu automatically scrolls through multiple screens.

Standard menus

The Standard menus are the most commonly used menus. The following is a list of some items displayed in this menu mode. Visit apc.com for additional details.

Main on/off This button is used to turn the UPS output power on and off.

Quick status LEDs

The online indicator illuminates green when UPS output is turned on and operating on AC power.

The on-battery battery indicator illuminates orange and the unit will continue to emit a series of short beeps indicating that the UPS is operating on battery power.

The error detected LED will illuminate red if the unit detects an error condition. The display screen may also indicate an error message or code.

The replace battery indicator illuminates red when the UPS battery does not pass self test and requires replacement.

Escape The escape key always returns the display to the previous screen. It is used to exit the various display menus.

Return The return key is used to confirm a selection and/or enter a menu.

Up/down selection arrows The arrows are used to navigate through each menu selection.

Standard Menu Display Advanced Menu Display

Menu General Functions

Status View UPS information:

• Operating Mode

• Efficiency

• Load Power

• Load VA

• Battery Charge state

• Estimated Runtime

• Battery Temp

• Input

• Output

• SmartConnect

• Probe 1, Probe 2, when NMC and sensor probes are installed

Configuration Configures UPS settings:

• Language

• Green Mode

• Local Power Quality: Good, Fair, Poor

• Menu Type: Standard or Advanced

• Audible Alarm

• Display (Auto Dim, Auto Off, Always On)

• Reset to Factory Default

• SmartConnect Control

• Install FW?

Test & Diags Performs UPS tests and diagnostic functions:

• UPS Self Test

• UPS Alarms Test

• Calibration Test su0983a

Load: 18%

Batt: 100% su0984a

On Utility

Efficiency: 98% Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U16

Advanced menus

The Advanced menus provide additional options for the UPS and are available only if the display interface is configured to use the Advanced menus.

About View UPS information:

• UPS Model

• UPS Part No.

• UPS Serial No.

• UPS Manufacture Date

• Battery Part No.

• Battery Install Date

• Replace Battery by

• Running UPS FW

• Available UPS FW

• UPS MAC

• UPS IP Address

• UPS Product Key

• SmartSlot Card (if installed)

Menu General Functions

Status View detailed UPS information:

• Operating Mode

• Efficiency

• Load Power

• Load VA

• Load Amps

• Load Energy

• Battery Charge State

• Estimated Runtime

• Battery Voltage

• Battery Temp

• Input

• Output

• Outlet Groups

• SmartConnect

• Probe 1, Probe 2, when NMC and sensor probes are installed

Control Controls the Main and Controlled Outlet Group to turn on, turn off, shutdown, or reboot:

• UPS Control

• Outlet Group Control

Configuration Configure advanced UPS settings:

• Language

• Output Voltage

• Green Mode

• Local Power Quality

• Menu Type

• Audible Alarm

• Display

• Sensitivity

• Low Transfer

• High Transfer

• Low Battery Setting

• Auto Self Test

• Reset Energy Meter

• Enter Setup Wizard

• Reset to Factory Defaults

• Site Wiring Fault

• Config Main Group Outlets

• Config Group Outlets (if Controlled Outlet is available)

• ModBus Settings

• SmartConnect Control

• UPS IP Address Setting

• NMC IP Address Settings (if NMC is available)

• Install FW? (only available if a firmware update is available)

Test & Diag Perform UPS tests and diagnostics functions:

• UPS Self Test

• UPS Alarms Test

• Calibration Test

Logs View the error log for information about UPS errors that have occurred.

About View UPS information:

• UPS Model

• UPS Part No.

• UPS Serial No.

• UPS Manufacture Date

• Battery Part No.

• Battery Install Date

• Replace Battery by

• Running UPS FW

• Available UPS FW

• UPS MAC

• UPS IP Address

• UPS Product Key

• SmartSlot Card (if installed)

Menu General Functions Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U 17

Configuration General configuration settings

Configuration settings may be changed at any time using the LCD interface or PowerChute software. This table provides a brief description of the general settings, for more detailed information on each of these parameters consult application note 80 at www.apc.com.

Setting Factory Default Options Description

High Transfer 120 V: 127 Vac

230 V: 253 Vac

127 Vac - 136 Vac

253 Vac - 265 Vac

To avoid unnecessary battery usage, set the transfer point higher if the AC voltage is chronically high and the connected equipment is known to work under this condition. The Power Quality setting will automatically change this setting.

Note: Use the Advanced Menus to configure this setting.

Low Transfer 120 V: 106 Vac

230 V: 207 Vac

97 Vac - 106 Vac

195 Vac - 207 Vac

Sets the transfer point lower if the AC voltage is chronically low and the connected equipment can tolerate this condition. This setting may also be adjusted using the power quality setting.

Note: Use the Advanced Menus to configure this setting.

Sensitivity Normal • Normal

• Reduced

• Low

Selects the level of sensitivity to power events that the UPS will tolerate.

• Normal: The UPS will go on battery power more often to provide the cleanest power supply to the connected equipment.

• Low: The UPS will tolerate more fluctuations in power and will go on battery power less often.

If the connected load is sensitive to power disturbances, set the sensitivity to Normal.

Date of Last Battery Replacement

Date set at factory. Reset this date when the battery module is replaced.

Audible Alarm On • On

• Off

The UPS will mute all audible alarms if this is set to Off or when the display buttons are pressed.

Auto Self Test On start-up and every 14 days since the last test

• Never

• Start-up only

• Frequency of test (every 7 to 14 days)

The interval at which the UPS will execute a self-test.

Reset to Factory Default

No Yes/No Restores the UPS factory default settings.

Site Wiring Fault Enable • Enable

• Disable

• Can Ack

Sets the Site Wiring Fault detection to Enable, Disable or User Can Acknowledge

Output voltage 120 V

230 V

• 120Vac

• 110Vac

• 127Vac

• 230 Vac

• 220 Vac

• 240 Vac

Selects the output voltage. This is only settable when the UPS is turned off.

Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U18

Outlet group configuration settings

The Main Outlet Group and the Controlled Outlet Group can be configured to independently turn off, turn on, shut down, and reboot connected equipment.

The Main and Controlled Outlet Groups can be configured to do the following:

• Turn off: Disconnect from power immediately and restart only with a manual command.

• Turn on: Connect to power immediately.

• Shutdown: Disconnect power in sequence, and automatically reapply power in sequence when AC power becomes available.

• Reboot: Shut down and restart.

In addition, the Main Outlet Group and the Controlled Outlet Group can be configured to do the following:

• Turn on or off in a specified sequence

• Automatically turn off or shut down when various conditions occur

Note: If the Main and Controlled Outlet Groups are not configured, all of the outlets on the unit will still provide battery back-up power.

Note: The Main Outlet Group functions as a master switch. It will turn on first when power is applied, and shut off last when there is a power outage and battery run-time has been exhausted.

The Main Outlet Group must be turned on for the Controlled Outlet Group to turn on.

Green Mode Enable • Enable

• Disable

This will enable or disable Green mode function. Green Mode conserves energy while the UPS is operating on line.

SmartConnect Control

Enable • Enable

• Disable

This will permit remote configuration changes.

Low Battery Setting

150 sec Set the value in seconds The UPS will emit an audible alarm when the remaining runtime has reached this level.

Install FW? Don’t Install • Next off (Updates the UPS Firmware next time that the UPS is turned off)

• Now (Updates the UPS firmware immediately without interrupting operations)

• Don't Install

Firmware update: this only appears when new firmware is available in the flash memory of the UPS and is ready to be installed

Setting Factory Default Options Description

Name String Outlet Group

Outlet Group 1 Edit these names using an external interface, such as the Network Management Card Web interface.

UPS Name String UPS Outlets

Turn On Delay 0 sec Set the value in seconds The amount of time the UPS or the Controlled Outlet Group will wait between receiving the command to turn on and the actual startup.

Turn Off Delay • 0 sec (UPS Outlets)

• 90 sec (Controlled Outlet Groups)

Set the value in seconds The amount of time the UPS or the Controlled Outlet Group will wait between receiving the command to turn off and the actual shut down.

Reboot Duration 8 sec Set the value in seconds The amount of time that the UPS or the Controlled Outlet Group must remain off before it will restart.

Minimum Return Time

0 sec Set the value in seconds The amount of battery runtime that must be available before the UPS or the Controlled Outlet Group will turn on.

Setting Factory Default Options Description Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U 19

Modbus settings

Load Shed On Battery

Disabled • Shutdown with Delay

• Shutdown immediately

• Turn off immediately

• Turn off with delay

• Disabled

When the unit switches to battery power, the UPS can disconnect power to the Controlled Outlet Group to save runtime.

To configure this delay time, use the LOAD SHED TIME WHEN ON BATTERY setting.

Load Shed Time when On Battery

Disabled Set the value in seconds The amount of time the outlets will function on battery power before they will turn off.

Load Shed On Runtime

Disabled • Shutdown with delay

• Shutdown immediately

• Turn off immediately

• Turn off with delay

• Disabled

When the battery runtime falls below the specified value, the Controlled Outlet Group will turn off.

Configure this time using the LOAD SHED RUNTIME REMAINING setting.

Load Shed On Runtime Remaining

Disabled Set the value in seconds When the remaining runtime reaches this level, the Controlled Outlet Group will turn off.

Load Shed on Overload

Disabled • Disabled

• Enabled

In the event of an overload (greater than 100% output power), the Controlled Outlet Group will immediately turn off to conserve power for critical loads. The Controlled Outlet Group will only turn on again with a manual command.

Setting Factory Default Options Description

Slave ID 1 1- 223 Sets the Modbus slave address of UPS

Ser+USB Disable • Enable

• Disable

Enables or disables UPS Modbus protocol over serial and USB ports

TCP Settings

• TCP Protocols Disable • Disable

• Read-Only

• Read-Write

Enables or disables UPS Modbus TCP/IP protocol provided by the embedded SmartConnect port.

• Disable: Disables UPS Modbus TCP/IP protocol

• Read-Only: Modbus master over TCP/IP protocol is only allowed to get UPS status.

• Read-Write: Modbus master over TCP/IP protocol is allowed to get UPS status and control the UPS.

The port number of UPS Modbus TCP/IP protocol is fixed at 502.

TCP Settings

• Master IP Addr 000.000.000.000 A valid IPv4 address Specifies the IPv4 address of the Modbus master.

The Master IP Addr when set as 000.000.000.000 will allow connection of external Modbus master with any IP address. When not set as 000.000.000.000, only the Modbus master with the specified IP address is allowed to connect to the UPS.

Example: Master IP Address is set to 192.168.0.10, only Modbus master with IP address 192.168.0.10 could connect to the UPS.

Setting Factory Default Options Description Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U20

UPS IP Address settings

SmartConnect APC SmartConnect allows you to monitor the health and status of your UPS from any device connected to the Internet. Visit www.smartconnect.apc.com to learn more.

Setting Factory Default Options Description

UPS IP Address Mode

DHCP • DHCP

• Manual

Selects the IP address configuration mode of UPS embedded SmartConnect port:

• DHCP: UPS will automatically configure its IPv4 address via DHCP protocol.

• Manual: Manually assigns a static IPv4 address to UPS

IP Address 000.000.000.000 A valid IPv4 address This is the IPv4 address assigned to the embedded SmartConnect port.

When DHCP IP address mode is selected, it will display the UPS IPv4 address assigned by DHCP server.

When Manual IP address mode is selected, you need to manually specify a static IPv4 address.

Subnet Mask 000.000.000.000 A valid IPv4 subnet mask

Assigns the subnet mask of the network where UPS IPv4 address belongs.

When DHCP IP address mode is selected, it will display the subnet mask assigned by DHCP server.

When Manual IP address mode is selected, you need to manually specify the subnet mask of the network where the specified static IPv4 address belongs.

Default Gateway 000.000.000.000 A valid IPv4 address This is the IPv4 address of the host from where the UPS sends data to another network or Internet.

When DHCP IP address mode is selected, it will display the default gateway assigned by DHCP server.

When Manual IP address mode is selected, you need to manually specify the IPv4 address of default gateway.

DNS Server 1 000.000.000.000 A valid IPv4 address The IPv4 address of first domain name server (DNS) the UPS uses to resolve host names to IPv4 addresses.

When DHCP IP address mode is selected, it will display the IPv4 address of the first DNS server assigned by DHCP server.

When Manual IP address mode is selected, you need to manually specify the IPv4 address of the first DNS server.

DNS Server 2 000.000.000.000 A valid IPv4 address The IPv4 address of second domain name server (DNS) the UPS uses to resolve host names to IPv4 addresses (only when UPS fails to resolve IP address through first domain name server). This setting is optional.

When DHCP IP address mode is selected, it will display the IPv4 address of the second DNS server assigned by DHCP server.

When Manual IP address mode is selected, you can manually specify the IPv4 address of the second DNS server or leave it as 000.000.000.000.

Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U 21

Emergency Power Off Overview

The Emergency Power Off (EPO) option is a safety feature that will immediately shut off power to all connected equipment. When the EPO button is pushed, all connected equipment will immediately turn off and will not switch to battery power.

Connect each UPS to the EPO switch. In configurations where multiple units are connected in parallel, each UPS must be connected to the EPO switch.

The UPS must be restarted for power to return to connected equipment. Press the ON/OFF button on the front panel of the UPS.

Normally open contacts

1. If the EPO switch or relay contacts are normally open, insert the wires from the switch or contacts at pins 1 and 2 of the EPO terminal block. Use 16-28 AWG wire.

2. Secure the wires by tightening the screws.

If the contacts are closed, the UPS will turn OFF and power will be removed from the load.

Normally closed contacts

1. If the EPO switch or relay contacts are normally closed, insert the wires from the switch or contacts at pins 2 and 3 of the EPO terminal block. Use 16-28 AWG wire.

2. Insert a wire jumper between pins 1 and 2. Secure the wires by tightening the three screws at positions 1, 2, and 3.

If the contacts are opened, the UPS will turn OFF and power will be removed from the load.

Note: Pin 1 is the power source for the EPO circuit, it provides a few milliAmps of 24 V power.

If the normally closed (NC) EPO configuration is used, the EPO switch or relay should be rated for dry circuit applications, the rating should be for low voltage and low current applications. This normally implies the contacts are gold plated.

The EPO interface is a Safety Extra Low Voltage (SELV) circuit. Connect the EPO interface only to other SELV circuits. The EPO interface monitors circuits that have no determined voltage potential. SELV circuits are controlled by a switch or relay properly isolated from utility power. To avoid damage to the UPS, do not connect the EPO interface to any circuit other than a SELV circuit.

Use one of the following cable types to connect the UPS to the EPO switch.

• CL2: Class 2 cable for general use.

• CL2P: Plenum cable for use in ducts, plenums, and other spaces used for environmental air.

• CL2R: Riser cable for use in a vertical run in a floor-to-floor shaft.

• CLEX: Limited use cable for use in dwellings and for use in raceways.

• Installation in Canada: Use only CSA certified, type ELC, (extra low voltage control cable).

• Installation in countries other than Canada and the USA: Use standard low voltage cable in accordance with national and local regulations.

CAUTION

RISK OF ELECTRIC SHOCK

• Adhere to all local and national electrical codes.

• Wiring should be performed by a qualified electrician.

• Always connect the UPS to a grounded outlet.

Failure to follow these instructions can result in minor or moderate injury.

Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U22

Battery Replacement Always recycle used batteries.

For information on recycling a used battery, refer to the Battery Disposal Information sheet included with the replacement battery.

Battery life is highly dependent on temperature and use. To identify when to replace batteries, Smart-UPS have a predictive battery replacement date indicator in the “About” menu and automatic (and configurable) self-tests.

Proactively replace batteries to maintain the highest availability. To ensure protection and high performance, use only genuine APC replacement battery cartridges (RBC™). The APC RBC contains instructions for battery replacement and disposal. To order a replacement battery go to the APC by Schneider Electric Web site, www.apc.com.

UPS Model Replacement Battery Battery Module

SMT750C, SMT750IC RBC48

Lead acid, 1 module, 24VdcSMT1000C, SMT1000IC RBC6

SMT1500C, SMT1500IC RBC7

SMT2200C, SMT2200IC, SMT3000C, SMT3000IC RBC55 Lead acid, 2 modules, 48Vdc

SMT750RM2UC, SMT750RMI2UC APCRBC123

Lead acid, 1 module, 24VdcSMT1000RM2UC, SMT1000RMI2UC APCRBC157

SMT1500RM2UC, SMT1500RMI2UC APCRBC159

SMT2200RM2UC, SMT2200RMI2UC

SMT3000RM2UC, SMT3000RMI2UC RBC43 Lead acid, 1 module, 48Vdc Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U 23

Troubleshooting Problem and Possible Cause Solution

The UPS will not turn on or there is no output.

The unit has not been turned on. Press the ON key once to turn on the UPS.

The UPS is not connected to AC power. Be sure the power cable is securely connected to the unit and to the AC power supply.

The input circuit breaker has tripped. Reduce the load on the UPS. Disconnect nonessential equipment and reset the circuit breaker.

The unit shows very low or no input AC voltage.

Check the AC power supply to the UPS by plugging in a table lamp. If the light is very dim, check the AC voltage.

The battery connector plug is not securely connected.

Be sure that all battery connections are secure.

There is an internal UPS error detected. Do not attempt to use the UPS. Unplug the UPS and have it serviced immediately.

The UPS is operating on battery, while connected to input AC power.

The input circuit breaker has tripped. Reduce the load on the UPS. Disconnect nonessential equipment and reset the circuit breaker.

There is very high, very low, or distorted input line voltage.

Move the UPS to a different outlet on a different circuit. Test the input voltage with the AC voltage display. If acceptable to the connected equipment, reduce the UPS sensitivity.

UPS is emitting intermittent beeps.

The UPS is operating normally. None. The UPS is protecting the connected equipment.

UPS does not provide expected backup time.

The UPS battery is weak due to a recent power outage or is near the end of its service life.

Charge the battery. Batteries require recharging after extended outages and wear out faster when put into service often or when operated at elevated temperatures.

If the battery is near the end of its service life, consider replacing the battery even if the replace battery indicator has not illuminated.

The UPS is experiencing an overload condition.

Check the UPS load display. Unplug unnecessary equipment, such as printers.

Display interface LEDs flash sequentially.

The UPS has been shut down remotely through software or an optional accessory card.

None. The UPS will restart automatically when AC power is restored.

The Error LED is illuminated. The UPS displays an error message and emits a constant beeping sound.

Internal UPS error detected. Do not attempt to use the UPS. Turn the UPS off and have it serviced immediately.

The Replace Battery icon is illuminated and the UPS beeps for one minute every five hours.

The battery has a weak charge. Allow the battery to recharge for at least four hours. Then, perform a self-test. If the problem persists after recharging, replace the battery.

The Replace Battery icon is flashing and the UPS beeps for once every 2 seconds.

The replacement battery is not properly connected.

Be sure that the battery connector is securely connected.

The UPS displays a site wiring error message.

Wiring errors detected include missing ground, hot-neutral, polarity reversal, and overloaded neutral circuit.

If the UPS indicates a site wiring error, have a qualified electrician inspect the building wiring. (Applicable for 120 V units only.)

Smart-UPS 750/1000/1500/2200/3000 VA 120/230 Vac Tower / Rack-Mount 2U24

Limited Factory Warranty Schneider Electric IT Corporation (SEIT), warrants its products to be free from defects in materials and workmanship for a period of three (3) years excluding the batteries, which are warranted for two (2) years from the date of purchase. The SEIT obligation under this warranty is limited to repairing or replacing, at its own sole option, any such defective products. Repair or replacement of a defective product or parts thereof does not extend the original warranty period.

This warranty applies only to the original purchaser who must have properly registered the product within 10 days of purchase. Products may be registered online at warranty.apc.com.

SEIT shall not be liable under the warranty if its testing and examination disclose that the alleged defect in the product does not exist or was caused by end user’s or any third person’s misuse, negligence, improper installation, testing, operation or use of the product contrary to SEIT’s recommendations or specifications. Further, SEIT shall not be liable for defects resulting from: 1) unauthorized attempts to repair or modify the product, 2) incorrect or inadequate electrical voltage or connection, 3) inappropriate on site operation conditions, 4) Acts of God, 5) exposure to the elements, or 6) theft. In no event shall SEIT have any liability under this warranty for any product where the serial number has been altered, defaced, or removed.

EXCEPT AS SET FORTH ABOVE, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, BY

OPERATION OF LAW OR OTHERWISE, APPLICABLE TO PRODUCTS SOLD, SERVICED OR

FURNISHED UNDER THIS AGREEMENT OR IN CONNECTION HEREWITH.

SEIT DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY, SATISFACTION AND

FITNESS FOR A PARTICULAR PURPOSE.

SEIT EXPRESS WARRANTIES WILL NOT BE ENLARGED, DIMINISHED, OR AFFECTED BY AND NO

OBLIGATION OR LIABILITY WILL ARISE OUT OF, SEIT’S RENDERING OF TECHNICAL OR OTHER

ADVICE OR SERVICE IN CONNECTION WITH THE PRODUCTS.

THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER

WARRANTIES AND REMEDIES. THE WARRANTIES SET FORTH ABOVE CONSTITUTE SEIT’S SOLE

LIABILITY AND PURCHASER’S EXCLUSIVE REMEDY FOR ANY BREACH OF SUCH WARRANTIES.

SEIT WARRANTIES EXTEND ONLY TO ORIGINAL PURCHASER AND ARE NOT EXTENDED TO ANY

THIRD PARTIES.

IN NO EVENT SHALL SEIT, ITS OFFICERS, DIRECTORS, AFFILIATES OR EMPLOYEES BE LIABLE FOR ANY FORM OF INDIRECT, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, ARISING OUT

OF THE USE, SERVICE OR INSTALLATION OF THE PRODUCTS, WHETHER SUCH DAMAGES ARISE

IN CONTRACT OR TORT, IRRESPECTIVE OF FAULT, NEGLIGENCE OR STRICT LIABILITY OR

WHETHER SEIT HAS BEEN ADVISED IN ADVANCE OF THE POSSIBILITY OF SUCH DAMAGES.

SPECIFICALLY, SEIT IS NOT LIABLE FOR ANY COSTS, SUCH AS LOST PROFITS OR REVENUE,

WHETHER DIRECT OR INDIRECT, LOSS OF EQUIPMENT, LOSS OF USE OF EQUIPMENT, LOSS OF

SOFTWARE, LOSS OF DATA, COSTS OF SUBSTITUANTS, CLAIMS BY THIRD PARTIES, OR

OTHERWISE.

NOTHING IN THIS LIMITED WARRANTY SHALL SEEK TO EXCLUDE OR LIMIT SEIT’S LIABILITY

FOR DEATH OR PERSONAL INJURY RESULTING FROM ITS NEGLIGENCE OR ITS FRAUDULENT

MISREPRESENTATION OF TO THE EXTENT THAT IT CANNOT BE EXCLUDED OR LIMITED BY

APPLICABLE LAW.

To obtain service under warranty you must obtain a Returned Material Authorization (RMA) number from customer support. Customers with warranty claims issues may access the SEIT worldwide customer support network through the SEIT Web site: www.apc.com.