Attachment Wooden Gate Pallet Drawing.xls

This is a technical drawing specification for a wooden gate measuring 84 inches wide by 88 inches tall, issued as an attachment to the Defense Logistics Agency Distribution solicitation SP330026Q5009 for wooden gates. The specification establishes construction requirements for the gate, including mandatory compliance with ISPM 15 guidelines for heat treatment of wood products acquired by the Department of Defense. The gate shall be constructed using 2½ inch by 1½ inch Douglas fir softwood or alternatively typical 8-inch by 7/16-inch Oriented Strand Board (OSB), with boards nailed together at all cross-section points using rust-proof nails, with a minimum of three nails required at each cross-section nail point. The drawing indicates an 11-inch typical gap between slats and specifies front and side view dimensions with 29½ inches plus or minus spacing average across the gate face.