Attachment No. 3 - Salient Characteristics Overhead Baffle Repair.pdf
PDF 118 KB Posted
- Attached to
- JB CHS Firing Range Deliver and Install Dust Collection Unit and Overhead Ballistic Rubber Facia
- Solicitation number
- FA441824Q0046
About this file
This document is an attachment detailing the salient characteristics for the repair of the overhead baffles on a small arms range. The key requirements include replacing the treated wood sheathing (4'x8', 1/2" thick) and the rubber ricochet panels (4'x8', 1/2" thick) on the existing overhead baffles to bring the range back up to proper operating and safety standards. This requirement is related to a federal contract opportunity solicitation (FA441824Q0046) issued by the Department of the Air Force Air Mobility Command for the purchase and installation of a Dust Collection Unit and repair of the damaged overhead baffle at the Joint Base Charleston Small Arms Range. The contractor will be responsible for providing all labor, materials, transportation, supervision, and management to perform the installation work.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SALIENT CHARACTERISTICS
CATM Small Arms Range Baffle Restore
I. GENERAL OVERVIEW.
628 SFS CATM shop requires the replacement of the facia on the overhead baffles to bring the range back up to proper operating and safety standards.
II. SPECIFICATIONS.
At a minimum the equipment and accessories shall possess the following specifications:
- Specifications:
- Replace the treated wood sheathing (4x8’, ½” thick) on the existing overhead baffles
- Replace the rubber ricochet panels on top of the wood facia (4’x8’, ½” thick)
III. APPLICATION.
The wooden facia and rubber facing on the overhead baffles on the small arms range will be replaced.
File details come from the government source that posted it. Updated .