Attachment B Tech Specs.pdf

Attachment B

DCF ITB 2324 014

Dishwasher with Attachments for NFETC

PART 1 - GENERAL 1.1 Specifications

Below is the type of Dishwasher, Disposer, Water Softener System and optional Soiled

Breakdown System needed for NFETC. The specification represents the basic design, the equipment must be of equal or higher quality and functional equivalently.

A. Electric conveyor high temperature rack commercial grade dishwasher

B. Machine Waste Disposer

C. Water Softening System

Approved by______________________________________ Date___________ Approved by______________________________________ Date___________

Printed in U.S.A. HOBART • 701 S Ridge Avenue, Troy, OH 45373 • 1-888-4HOBART • www.hobartcorp.com F40805 (03/21) Page 1 of 4

COM

M

ERCIAL

DISHW

ASHERS

Project ____________________________________________________________________

AIA # ________________________________ SIS # ________________________________

Item # _______________________________ Quantity ________ C.S.I. Section 114000

CLPS66eN-EGR ELECTRIC High Temperature Rack Conveyor Dishwashing Machine

CLeN SERIES – CLPS66eN-EGR ELECTRIC

SPECIFIER STATEMENT

Specified dishwasher will be Hobart CLPS66eN Energy Recovery electric tank heat model with drain water energy recovery (DWER) and Opti- Rinse™. Includes 22" power scrapper, insulated ergonomic cabinet style doors, dirty water indica-tor, configurable “intelligent” de-lime notification, top mounted computer controls, and NSF approved pot and pan cycle mode. The wash tank utilizes durable precision pressure sensor moni-tors in lieu of conventional mechanical floats. The 19.5" standard chamber height will accommodate up to (6) standard sheet pans at a time on an open-end sheet pan rack.

STANDARD FEATURES

+ 202 racks per hour + 22" power scrapper + Drain water energy recovery (DWER) + Opti-Rinse™ system + Drain water tempering kit + Rapid return conveyor drive mechanism + Internal stainless steel pressure-less 30 KW booster heater

❑ Dual point electrical connection standard on 208/60/3 and 240/60/3 voltage machines, when equipped with internal booster; single point kits available (see page 3)

❑ Single point connection standard on 480/60/3 and 600/60/3 voltage machines, when equipped with internal booster

+ Large double door opening for ease of cleaning + Doors are insulated & hinged with door interlock switches + 19.5" chamber height opening (accepts sheet pans) + Top mounted micro-processor control module + Energy saver mode (programmable auto-shut down) + Dirty water indicator + Manager activated low temperature alert + NSF rated configurable pot and pan dwell mode + Configurable “intelligent” delime notification + Service diagnostics + Self-aligning wash manifolds + Stainless steel anti-clogging wash arms + Removable pump intake screen + Stainless steel self-draining pump and impeller + Single, sloping scrap screen and deep scrap basket + Stainless panels enclose perimeter and bottom + Door actuated drain closure + Vent fan control + Booster heater control + Power scrapper vent cowl curtain kit + ENERGY STAR® Certified

OPTIONS & ACCESSORIES (Available at extra cost) ❑ Standard, short, and extended stainless steel vent hoods ❑ Direct drive unloader – adds 38" length. Reference spec F39520 for more details ❑ Side loader – SL23 adds 23" length, SL30 adds 30" length.

Reference specs F40926 and F40927 for more details ❑ Blower-dryer – adds 331⁄8" to length. Reference spec F40252 for more details (ships separate from dishmachine, contact Hobart Service for installation)

❑ Flanged feet kit (requires two kits) ❑ Higher than standard chamber (24" opening) ❑ Table limit switch with 10' wire ❑ Correctional package (contact Hobart for details) ❑ Pressure regulator valve (PRV), for use with external booster ❑ Water shock absorber kit ❑ Factory-mounted circuit breakers (contact Hobart for details) ❑ Field installed single point kits available for 208/60/3 and

240/60/3 machines when equipped with internal booster

Hobart CLPS66EN‐EGR+BUILDUP () Item#: 1

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 4

CAD and/or Revit Files AvailablePage 2 of 4 CLPS66eN-EGR ELECTRIC

CLPS66eN-EGR ELECTRIC High Temperature Rack Conveyor

Dishwashing Machine

Top View Left to Right Top View Right to Left

Front View Left to Right Front View Right to Left

Side View

WIDTH OF

TRACKS

WIDTH OF

MACHINE 20" 27"

11"

27"

AVG INSIDE

TABLE WIDTH

14 1/2"

CL

MACHINE 2 HOLES FOR BOLTING

TABLE TO TANK

FRONT OF

MACHINE

CL

3/8"

3/8"

3"

1 1/4"

8" AVG

22"

INSIDE TANK

3"

P2

E1 E2

P3

32 3/4" 41 15/32"

63 1/2" 59 13/32 "

36 7/8" 23"

OPEN DOOR

CLEARANCE

L-R OPER

68 1/2"

7 3/8

65 1/2"10"

TYP V1

5" 21 5/8"

R-L OPER

68 1/2"

7 3/8"

65 1/2"10"

TYP

5" V1 21 5/8"

P3 P2

E2 E1

23"

OPEN DOOR

CLEARANCE

47 13/16" 55 1/2" 59 3/8"

63"

29 1/2"

P1

22"

BOTH ENDS

19 11/16"

31 1/16"

5" RECOMMENDED

MIN DISTANCE FROM

WALL

13"

9 3/8"

WALL

20" SERVICE

CLEARANCE

(BOTH SIDES)

20" SERVICE

CLEARANCE

(BOTH SIDES)

65 9/16" 65 9/16"

P1P1

34"

E3 E3

15 1/8"

E3E1 E2

63 3/4"

MODEL:

CLPS76eN ENERGY RECOVERY

L-R OPERATION

D-974809

REV B

MODEL:

CLPS76eN ENERGY RECOVERY

R-L OPERATION

D-974808

REV B

Suggested Track and Table Layout

View Showing Hole Locations in Turned Down Portion of Table

Tabling Connection: 66" inside tank (at table connection)

Hobart CLPS66EN‐EGR+BUILDUP () Item#: 1

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 5 http://hobart.kclcad.com/mobile

CLPS66eN-EGR ELECTRIC Page 3 of 4

CLPS66eN-EGR ELECTRIC High Temperature Rack Conveyor

Dishwashing Machine

SPECIFICATIONS

Capacities Racks per Hour (NSF rated) Wash Tank (U.S. gallons) Power Scrapper (U.S. gallons) Conveyor Speed (feet per minute) . . . . . . . . . . . . . . . . . . . . . . . 5.6 Motor Horsepower Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/6 Wash Power Scrapper Water Consumption U.S. Gallons per Hour (maximum use at 20 PSI) U.S. Gallons per Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.62 Peak Drain Flow (U.S. gallons per minute) Heating Tank Heat, Electric (kW) Electric Booster (built-in) (kW for 70°F rise) Venting Load End (minimum CFM) Unload End (minimum CFM) Shipping Weight (approximate) . . . . . . . . . . . . . . . . . . . . . . . 895 lbs.

Crated Dimensions . . . . . . . . . . . . . . . . . . . . . . . 76"L x 38"W x 78"H

LEGEND

Electrical Connections

Required when machine equipped with

SINGLE POINT ELECTRICAL CONNECTION

E1 Tank heat, motors, controls AND 30kW booster heater – multiple knockouts provided, 63-3/4" AFF.

Required when machine equipped with

DUAL POINT ELECTRICAL CONNECTION

E2 Tank heat, motors and controls – multiple knockouts provided, 63-3/4" AFF.

E3 Internal 30kW booster heater – multiple knockouts provided, 63-3/4" AFF.

Multiple knockouts provided for 2", 1" and 1/2" trade size conduits.

Plumbing Connections

P1

Drain. May be drained to either side of valve, plug opposite side 2" FPT. Recommend a floor drain minimum of 12'' from machine for access and maintenance. 7-3/8" AFF.

P2 Hot water. 1/2" FPT connection. 1/2", 11-3/16" AFF.

See plumbing notes for required temperatures.

P3 Cold water connection 1/2" FPT, cold water temperature 80°F, maximum 7-3/8" AFF.

Vent Connections

V1 Optional vent hoods, 4" x 16" vent stack with damper.

E1 Single Point Electrical Connection with internal 30 kW Booster Heater

Voltage

(E1) Tank Heat, Motors, Controls 30kW Booster Heater

Single Point Service Connection Rated Amps

Minimum Supply Circuit Ampacity / Maximum Protective Device

208/60/3 144.5 175 Field Installed SGLPT-KIT4-CLE required, order separately 240/60/3 138.2 150 Field Installed SGLPT-KIT2-CLE required, order separately 480/60/3 70.7 90 Ships Standard, Factory Installed 600/60/3 49.4 60 Ships Standard, Factory Installed

E2 Dual Point Electrical Connection with Internal 30 kW Booster Heater

E3

Voltage

(E2) Tank Heat, Motors, Controls (E3) 30kW Booster Heater

Dual Point Service ConnectionRated Amps

Minimum Supply Circuit Ampacity / Maximum

Protective Device Rated Amps

Minimum Supply Circuit Ampacity / Maximum

Protective Device 208/60/3 60.6 80 83.9 90 Dual Point Ships Standard 240/60/3 58.0 80 80.2 90 Dual Point Ships Standard 480/60/3 30.6 40 40.1 50 Field Convertible 600/60/3 22.6 35 26.9 40 Field Convertible

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 6

As continued product improvement is a policy of Hobart, specifications are subject to change without notice.

F40805 (03/21) Page 4 of 4 HOBART • 701 S Ridge Avenue, Troy, OH 45373 • 1-888-4HOBART • www.hobartcorp.com Printed in U.S.A.

CLPS66eN-EGR ELECTRIC High Temperature Rack Conveyor

Dishwashing Machine

VENT HOOD OPTIONS (Adjustable, vent stack can be adjusted 1" to either side)

Standard Short Extended

4 3/4"

OUTSIDE

11 1/4"

OUTSIDE

REF

10" 10"

4 3/4"

OUTSIDE

5 3/4"

OUTSIDE

REF

10"

4 3/4"

OUTSIDE

20 1/2"

OUTSIDE

REF

CLPS66eN-EGR Electric Heat Dissipation

BTU/HR.

Latent Sensible 43,100 18,500

WARNING: Plumbing and electrical connections should be made by qualified personnel who will observe all the applicable plumbing, sanitary, safety codes and National Electrical Code.

Plumbing Notes: Minimum incoming water temperatures: 110°F for 30kW internal booster. Building flowing water pressure to dish machine is 20 PSI, (+/- 5 PSI).

Single cold water connection supplies both drain water energy recovery and drain water tempering.

Recommended water hardness to be 3 grains or less for best results.

Electrical Note: Dishmachine not provided with internal GFCI protection.

NOTE: Additional CLeN Voltages and Amperages are available, see document F40972.

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 7

Approved by______________________________________ Date___________ Approved by______________________________________ Date___________

Printed in U.S.A. HOBART • 701 S Ridge Avenue, Troy, OH 45374 • 1-888-4HOBART • www.hobartcorp.com F40391 (11/21) Page 1 of 4

Project ____________________________________________________________________

AIA # ________________________________ SIS # ________________________________

Item # _______________________________ Quantity ________ C.S.I. Section 114000

FD4/500

FOODWASTE DISPOSERS

FD4/500 FOODW

ASTE DISPOSERS

FOOD W

ASTE

REDUCTIO

N

SPECIFIER STATEMENT

Peak periods for the large food service establish-ment can be very demanding on any foodwaste disposer. This powerful disposer has a large capacity for foodwaste. Hobart has engineered the 5 horsepower unit to perform dependably during peak demands for economical foodwaste disposal.

SPECIFICATIONS

Motors: Continuous duty rating. Permanently lubricated bearings. Inherent overload protection in motor.

Housings: Heavy-duty ductile iron upper housing. Ductile gray cast iron lower housing, machined, primed and painted. Heavy grind and discharge housings. Four bolts fasten the motor unit to the grind chamber, permit easy removal.

Legs: Tubular stainless steel with flanged feet to support housing. Adjustable to 3" in either direction.

Mounting: Disposer fastens to 7" I.D. throat opening cones.

A vinyl isolating ring eliminates metal-to-metal contact at the cone mounting, reduces vibration and noise trans mission.

Stationary Shredder Ring: Hardened ductile steel alloy, 13⁄8" high, 24 grinding teeth.

Flywheel: Hardened, ductile steel alloy flywheel with a breaker blade is 105⁄8" diameter. Flywheel outside diameter is cut at a 45° angle. Flywheel can be raised or lowered to adjust cutting gap, adjust for wear to increase life.

Motor Shaft Seal: Three lip seals with slinger on top of motor.

Drain Connector: The removable outlet flange is tapped for 2" pipe connection.

Dual Direction Grinding: Disposer flywheel operates in either direction. When installed with Control Groups 5 & 6, flywheel automatically starts in opposite direction each start. (Increases life and efficiency of grinding elements and frees flywheel of jams.)

Weight: Shipping – approximately 190 lbs. (does not include accessory group or controls).

Complies with

ASSE 1009

Hobart FD4/500+BUILDUP () Item#: 2

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 12

Page 2 of 4 FD4/500 FOODWASTE DISPOSERS

FD4/500

FOODWASTE DISPOSERS

ACCESSORY

COMPONENTS

CONES-SINK – Stainless Steel

Part No.

Cone 15" I.D. w/hole for water swirl inlet ............................ML-32664

Cone 18" I.D. w/hole for water swirl inlet ............................ML-32666

Cone 15" I.D. w/out swirl hole

Cone 18" I.D. w/out swirl hole

Sink 16" x 20" x 7" (7" opening) w/hole for water inlet .................ML-32662

WATER INLETS

Cone Water Swirl Inlet 1⁄2" N.P.T

Fixed Direction Water Inlet (for sinks or troughs) 1⁄2" N.P.T

FLOW CONTROL

10 Gallons per minute for Model FD500 — 3⁄4" N.P.T

CONE COVER – STAINLESS STEEL

15" Cone Cover w/feed hole ......ML-33268

18" Cone Cover w/feed hole ......ML-33269

ACCESSORY GROUPS

GROUP A

Nitrile Rubber Scrapping Ring

Stainless Steel Silver-Saver Sleeve with Side Feed Hole

Water Swirl Vacuum Breaker

GROUP B

Nitrile Rubber Silver-Saver Splash Guard Ring

Water Swirl Vacuum Breaker

GROUP C

Nitrile Rubber Silver-Saver Splash Guard Ring

Vacuum Breaker

Pre-Rinse Spray with Wall Bracket

GROUP D

Nitrile Rubber Silver-Saver Splash Guard Ring

7" I.D. Stainless Steel Weld-in Adapter for Sink

Fixed Direction Vacuum Breaker Water Inlet for Sink

CONE FEEDING ACCESSORIES

Part No.

Nitrile Rubber Scrapping Ring

Stainless Steel Silver-Saver Sleeve with side feed hole

SILVER-SAVER SPLASH GUARD RING

Nitrile Rubber Silver-Saver and Splash Guard Ring (for 7" opening cones, sinks and adapter)

SINK ADAPTER –

Standard Group D Accessory

7" I.D. Stainless Steel Adapter for Welding to Sink or Trough

VACUUM BREAKERS –

Luster Chrome Plated

3⁄4"

PRE-RINSE SPRAYS

PR-3 Heavy-duty Flexible Pre-rinse Spray (40" high with wall bracket)

ML-32333

Adapters are available to install Hobart Disposers on existing cones. See Form F7543.

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 13

FD4/500 FOODWASTE DISPOSERS Page 3 of 4

FOODWASTE DISPOSERS

ELECTRICAL CONTROL GROUPS Listed by Underwriters Laboratories Inc., for use with FD3 and FD4 Disposers (50 Hz. Electrical Specifications not submitted for UL Listing. )

Group 5 Includes:

Magnetic Contactors Pushbutton Start and Stop Automatic Reversing NEMA 4 Enclosure Solenoid Valve (24 V only)

Approximate Shipping Wt. 19 lbs.

Group 6 Includes:

Magnetic Contactors Pushbutton Start and Stop Automatic Reversing Time Delay for water after shut-off Line Disconnect Solenoid Valve (24 V only) NEMA 4 Enclosure

Approximate Shipping Wt. 20 lbs.

SAMPLE SPECIFICATION

FD4/500 — B — 5 (230/60/3)

Electrical Specifications

Electrical Control Group

Accessory Group

Model Number

Cut hole 19" for 18" cone. Hole to be 16" for 15" cone.

Solenoid must be installed in upright position.

Disposer may be easily rotated for better drain line connection.

Center line at wall outlet of trap should not be higher than center line of disposer discharge opening.

If water pressure is in excess of 60 P.S.I. install a pressure reducing valve.

AVAILABLE ELECTRICAL SPECIFICATIONS

H.P. Ph. Hz. Volts Rated Amps

5 3 60 200-230/460 14.0/7.0 5 3 50 220-240/380-415 13.2/6.6

The slant (/) line indicates the dual voltage operation accomplished by motor lead connection: follow connecting diagram on motor.

12 3/4

11 1/4

13 1/2

85 5/8

Ø 5/16" MOUNTING HOLES

12 3/4

11 1/4

13 1/2

85 5/8

Ø 5/16" MOUNTING HOLES

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 14

FOODWASTE DISPOSERS

As continued product improvement is a policy of Hobart, specifications are subject to change without notice.

F40391 (11/21) Page 4 of 4 HOBART • 701 S Ridge Avenue, Troy, OH 45374 • 1-888-4HOBART • www.hobartcorp.com Printed in U.S.A.

DETAILS AND DIMENSIONS

TYPICAL INSTALLATION

NOTE: Accessory Groups A and B – 18" Cone is Standard.

Specify 15" Cone in Place of 18" Cone When Desired.

15"

34"

6-1/2"

6-1/2"

*27-3/8"

15-3/4"

5-1/8"

8-1/2" 9"

2" DRAIN LINE

0"-6" FOOT

ADJUSTMENT

* HEIGHT CAN VARY FROM

25-1/2" TO 31-3/4"

SOLENOID VALVE

(FURNISHED WITH

CONTROL GROUP

VACUUM BREAKER

(OPTION)

GATE VALVE

CONTROL GROUP

WATER INLET

(OPTIONAL)

FLOW CONTROL

QUANTITY (2)

1/2" COLD

WATER SUPPLY

2" DRAIN

LINE

CAD and/or Revit Files Available

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 15

Approved by______________________________________ Date___________ Approved by______________________________________ Date___________

Printed in U.S.A. HOBART • 701 S Ridge Avenue, Troy, OH 45374 • 1-888-4HOBART • www.hobartcorp.com F40391 (11/21) Page 1 of 4

Project ____________________________________________________________________

AIA # ________________________________ SIS # ________________________________

Item # _______________________________ Quantity ________ C.S.I. Section 114000

FD4/500

FOODWASTE DISPOSERS

FD4/500 FOODW

ASTE DISPOSERS

FOOD W

ASTE

REDUCTIO

N

SPECIFIER STATEMENT

Peak periods for the large food service establish-ment can be very demanding on any foodwaste disposer. This powerful disposer has a large capacity for foodwaste. Hobart has engineered the 5 horsepower unit to perform dependably during peak demands for economical foodwaste disposal.

SPECIFICATIONS

Motors: Continuous duty rating. Permanently lubricated bearings. Inherent overload protection in motor.

Housings: Heavy-duty ductile iron upper housing. Ductile gray cast iron lower housing, machined, primed and painted. Heavy grind and discharge housings. Four bolts fasten the motor unit to the grind chamber, permit easy removal.

Legs: Tubular stainless steel with flanged feet to support housing. Adjustable to 3" in either direction.

Mounting: Disposer fastens to 7" I.D. throat opening cones.

A vinyl isolating ring eliminates metal-to-metal contact at the cone mounting, reduces vibration and noise trans mission.

Stationary Shredder Ring: Hardened ductile steel alloy, 13⁄8" high, 24 grinding teeth.

Flywheel: Hardened, ductile steel alloy flywheel with a breaker blade is 105⁄8" diameter. Flywheel outside diameter is cut at a 45° angle. Flywheel can be raised or lowered to adjust cutting gap, adjust for wear to increase life.

Motor Shaft Seal: Three lip seals with slinger on top of motor.

Drain Connector: The removable outlet flange is tapped for 2" pipe connection.

Dual Direction Grinding: Disposer flywheel operates in either direction. When installed with Control Groups 5 & 6, flywheel automatically starts in opposite direction each start. (Increases life and efficiency of grinding elements and frees flywheel of jams.)

Weight: Shipping – approximately 190 lbs. (does not include accessory group or controls).

Complies with

ASSE 1009

Hobart FD4/500‐ELE0KT () Item#: 2

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 16

Page 2 of 4 FD4/500 FOODWASTE DISPOSERS

FOODWASTE DISPOSERS

ACCESSORY

COMPONENTS

CONES-SINK – Stainless Steel

Part No.

Cone 15" I.D. w/hole for water swirl inlet ............................ML-32664

Cone 18" I.D. w/hole for water swirl inlet ............................ML-32666

Cone 15" I.D. w/out swirl hole

Cone 18" I.D. w/out swirl hole

Sink 16" x 20" x 7" (7" opening) w/hole for water inlet .................ML-32662

WATER INLETS

Cone Water Swirl Inlet 1⁄2" N.P.T

Fixed Direction Water Inlet (for sinks or troughs) 1⁄2" N.P.T

FLOW CONTROL

10 Gallons per minute for Model FD500 — 3⁄4" N.P.T

CONE COVER – STAINLESS STEEL

15" Cone Cover w/feed hole ......ML-33268

18" Cone Cover w/feed hole ......ML-33269

ACCESSORY GROUPS

GROUP A

Nitrile Rubber Scrapping Ring

Stainless Steel Silver-Saver Sleeve with Side Feed Hole

Water Swirl Vacuum Breaker

GROUP B

Nitrile Rubber Silver-Saver Splash Guard Ring

Water Swirl Vacuum Breaker

GROUP C

Nitrile Rubber Silver-Saver Splash Guard Ring

Vacuum Breaker

Pre-Rinse Spray with Wall Bracket

GROUP D

Nitrile Rubber Silver-Saver Splash Guard Ring

7" I.D. Stainless Steel Weld-in Adapter for Sink

Fixed Direction Vacuum Breaker Water Inlet for Sink

CONE FEEDING ACCESSORIES

Part No.

Nitrile Rubber Scrapping Ring

Stainless Steel Silver-Saver Sleeve with side feed hole

SILVER-SAVER SPLASH GUARD RING

Nitrile Rubber Silver-Saver and Splash Guard Ring (for 7" opening cones, sinks and adapter)

SINK ADAPTER –

Standard Group D Accessory

7" I.D. Stainless Steel Adapter for Welding to Sink or Trough

VACUUM BREAKERS –

Luster Chrome Plated

3⁄4"

PRE-RINSE SPRAYS

PR-3 Heavy-duty Flexible Pre-rinse Spray (40" high

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 17

FD4/500 FOODWASTE DISPOSERS Page 3 of 4

FOODWASTE DISPOSERS

ELECTRICAL CONTROL GROUPS Listed by Underwriters Laboratories Inc., for use with FD3 and FD4 Disposers (50 Hz. Electrical Specifications not submitted for UL Listing. )

Group 5 Includes:

Magnetic Contactors Pushbutton Start and Stop Automatic Reversing NEMA 4 Enclosure Solenoid Valve (24 V only)

Approximate Shipping Wt. 19 lbs.

Group 6 Includes:

Magnetic Contactors Pushbutton Start and Stop Automatic Reversing Time Delay for water after shut-off Line Disconnect Solenoid Valve (24 V only) NEMA 4 Enclosure

Approximate Shipping Wt. 20 lbs.

SAMPLE SPECIFICATION

FD4/500 — B — 5 (230/60/3)

Electrical Specifications

Electrical Control Group

Accessory Group

Model Number

Cut hole 19" for 18" cone. Hole to be 16" for 15" cone.

Solenoid must be installed in upright position.

Disposer may be easily rotated for better drain line connection.

Center line at wall outlet of trap should not be higher than center line of disposer discharge opening.

If water pressure is in excess of 60 P.S.I. install a pressure reducing valve.

AVAILABLE ELECTRICAL SPECIFICATIONS

H.P. Ph. Hz. Volts Rated Amps

5 3 60 200-230/460 14.0/7.0 5 3 50 220-240/380-415 13.2/6.6

The slant (/) line indicates the dual voltage operation accomplished by motor lead connection: follow connecting diagram on motor.

12 3/4

11 1/4

13 1/2

85 5/8

Ø 5/16" MOUNTING HOLES

12 3/4

11 1/4

13 1/2

85 5/8

Ø 5/16" MOUNTING HOLES

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 18

FOODWASTE DISPOSERS

As continued product improvement is a policy of Hobart, specifications are subject to change without notice.

F40391 (11/21) Page 4 of 4 HOBART • 701 S Ridge Avenue, Troy, OH 45374 • 1-888-4HOBART • www.hobartcorp.com Printed in U.S.A.

DETAILS AND DIMENSIONS

TYPICAL INSTALLATION

NOTE: Accessory Groups A and B – 18" Cone is Standard.

Specify 15" Cone in Place of 18" Cone When Desired.

15"

34"

6-1/2"

6-1/2"

*27-3/8"

15-3/4"

5-1/8"

8-1/2" 9"

2" DRAIN LINE

0"-6" FOOT

ADJUSTMENT

* HEIGHT CAN VARY FROM

25-1/2" TO 31-3/4"

SOLENOID VALVE

(FURNISHED WITH

CONTROL GROUP

VACUUM BREAKER

(OPTION)

GATE VALVE

CONTROL GROUP

WATER INLET

(OPTIONAL)

FLOW CONTROL

QUANTITY (2)

1/2" COLD

WATER SUPPLY

2" DRAIN

LINE

CAD and/or Revit Files Available

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 19

Item # _____________________________________

Quantity ___________________________________

C.S.I. Section 114000

F8567 – FD3/50 FD3/75 FD3/125 Foodwaste Disposers Page 1 of 4

FD3/50 FD3/75 FD3/125

FOODWASTE DISPOSERS701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

FD

3/50

FD

3/75

FD

3/125 FO

O D

W A

S T

E D

IS

P

O S

E R

S

MOTOR SHAFT SEAL: Face-type seal consists of sintered bronze mating ring and spring loaded carbon ring insert in chemical resistant neoprene bellows. Mating surfaces are protected from grit or fibers by being recessed into flywheel. Should any moisture pass this seal, a flinger and drain tube are provided to insure immediate removal. In addition, a lip-type oil seal (located beneath the bearings) is an “added protection” water seal.

DRAIN CONNECTOR: A chrome plated brass tail-piece is provided for connection to a 11⁄2" standard drain trap.

DUAL DIRECTIONAL GRINDING: All Disposers operate in either di rection of flywheel rotation.

Direc tion of rotation can be controlled by the operator (to increase life and efficiency of grinding elements — back flywheel free of a “jam”) when installed with Control Groups 5 & 6.

WEIGHT: Shipping – Approx. 60 lbs. (does not include accessory group or controls).

COMPACT SIZE -

BIG VERSATILITY

Hobart Disposers are well recognized for quality and capacity. They’re designed with your needs in mind - built with a large capacity for food wastes.

The following pages illustrate the variations of controls and accessories available to make these food waste disposers the most versatile equipment for small to medium sized clean-up systems.

SPECIFICATIONS

MOTORS: Continuous duty rating, equipped with manual reset thermal overload inherent protector.

Per manently lubricated ball bear ings for upper and lower shelf support. Upper bearing is sealed on both sides.

HOUSINGS: Heavy aluminum grind and discharge housings. Four bolts fasten the motor unit to the grind chamber, permit easy removal.

MOUNTING: All Hobart Disposers (except when using accessory group E), fasten to 7" I.D. (throat opening) cones. A vinyl isolating ring eliminates metal-to-metal contact at the cone mounting, reduces vibration and noise transmission.

STATIONARY SHREDDER RING: 13⁄4" high, 4 machine ground primary action breaker bars, 42 secondary action grinding teeth.

FLYWHEEL: Breaker blade, mounted at center, speeds grinding, prevents objects from “riding” at center. Two hardened stainless steel cutter blocks (fastened to flywheel with nylock screws) are replaceable, can be indexed for new cutting edges.

Ni-Resist flywheel is 63⁄16" diameter, slots undercut the shredder ring to assure that particles are cut to proper size before passing to the drain line.

Long Housing Model

Complies with

ASSE 1009

Hobart ACCESS‐GROUPC () Item#: 2

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 20

701 S Ridge Avenue, Troy, OH 45374 1-888-4HOBART • www.hobartcorp.com

FD3/50 FD3/75 FD3/125

FOODWASTE DISPOSERS

Page 2 of 4 F8567 – FD3/50 FD3/75 FD3/125 Foodwaste Disposers

ACCESSORY GROUPS

GROUP A (For use with long upper housing only.)

Vinyl Scrapping Ring

Stainless Steel Silver-Saver Sleeve with Side Feed Hole

Water Swirl Vacuum Breaker

GROUP B (For use with long upper housing only.)

Vinyl Silver-Saver Splash Guard Ring

Water Swirl Vacuum Breaker

GROUP C (For use with long upper housing only.)

Vinyl Silver-Saver Splash Guard Ring

Vacuum Breaker

Pre-Rinse Spray with Wall Bracket

FLOW CONTROL

Part No.

5 Gallons per minute for Model FD3/50 through

FD3/125 — 3⁄4" N.P.T

CONE COVER –

STAINLESS STEEL

15" Cone cover w/feed hole

18" Cone Cover w/feed hole

CONE FEEDING ACCESSORIES

Vinyl Scrapping Ring

Stainless Steel Silver-Saver Sleeve with side feed hole

SILVER-SAVER SPLASH

GUARD RING

Vinyl Silver-Saver and Splash Guard Ring (for 7" opening cones, sinks and adapter)

VACUUM BREAKERS —

Chrome Plated

3⁄4"

PRE-RINSE SPRAYS

PR-3 Heavy-duty Flexible Pre-Rinse Spray (38" high

GROUP E (For use with short upper housing only.)

NOTE: For use with short Upper Housing Foodwaste Disposer only.

Cover Stopper and Sink Adapter Assembly for 31⁄2" to 4" Sink Opening

Fixed Direction Vacuum Breaker Water Inlet for Sink

ACCESSORY

COMPONENTS

CONES-SINK—Stainless Steel

Part No.

Cone 15" I.D. w/hole for water swirl inlet

Cone 18" I.D. w/hole for water swirl inlet

Cone 15" I.D. w/out swirl hole

Cone 18" I.D. w/out swirl hole

Sink 16" x 20" x 7" (7" opening) w/hole for water inlet ............204015-2

WATER INLETS

Cone Water Swirl Inlet 1⁄2" N.P.T

Fixed Direction Water Inlet (for sinks or troughs) 1⁄2" N.P.T

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 21

FD3/50 FD3/75 FD3/125

FOODWASTE DISPOSERS701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

F8567 – FD3/50 FD3/75 FD3/125 Foodwaste Disposers Page 3 of 4

ELECTRICAL CONTROL GROUPS Listed by Underwriters Laboratories Inc., for use with FD3 Disposers (50 Hz. Electrical Specifications not submitted for UL Listing. )

Group 5 - For all Models Includes:

Magnetic Contactors Pushbutton Start and Stop Automatic Reversing Made from a NEMA 4 Enclosure Solenoid Valve (24 V only)

Approximate Shipping Wt. 19 lbs.

Group 6 - For all Models Includes:

Magnetic Contactors Pushbutton Start and Stop Automatic Reversing Time Delay for water after shut-off Line Disconnect Solenoid Valve (24 V only) Made from a NEMA 4 Enclosure

Approximate Shipping Wt. 20 lbs.

Group 4 - For Models thru

FD4/200

Includes:

Manual Reversing Switch NEMA 1 Enclosure Standard NEMA 4 Enclosure Optional Not available above 250 volts Optional Solenoid Valve

Approximate Shipping Wt. 11 lbs.

SAMPLE SPECIFICATION

FD3/75 — B — 4 (230/60/3)

Electrical Specifications

Electrical Control Group

Accessory Group

Model Number Cut hole 19" for 18" cone. Hole to be 16" for 15" cone.

Solenoid must be installed in upright position.

Disposer may be easily rotated for better drain line connection.

Center line at wall outlet of trap should not be higher than center line of disposer discharge opening.

If water pressure is in excess of 60 P.S.I. install a pressure reducing valve.

Model H.P. Ph. Hz. Volts Rated Amps

FD3/50 1⁄2

1 60 120/208-240 9.2/4.2-4.6

3 60 208-240/480 1.8-2.0/1.0

FD3/75 3⁄4

1 60 120/208-240 10.8/5.3-5.4

3 60 208-240/480 2.6-3.0/1.5

FD3/125 11⁄4

1 60 120/208-240 14.8/7.7-7.4

3 60 208-240/480 4.2-4.0/2.0

FD3/50 1⁄2

1 50 110-120/220-240 Contact

Customer Service

For Amperage

Data

3 50 220-240/380-415

FD3/75 3⁄4

1 50 110-120/220-240

3 50 220-240/380-415

FD3/125 11⁄4

1 50 110-120/220-240

3 50 220-240/380-415 The dash (-) between voltages represents the range (low-high) of voltage operation. The slant (/) line indicates the dual voltage operation accomplished by motor lead connection:

follow connecting diagram on motor.

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 22

1-888-4HOBART • www.hobartcorp.com

Page 4 of 4 F8567 – FD3/50 FD3/75 FD3/125 Foodwaste Disposers

As continued product improvement is a policy of Hobart, specifications are subject to change without notice.

FD3/50 FD3/75 FD3/125

FOODWASTE DISPOSERS

F8567 (REV. 03/14) LITHO IN U.S.A. (H-01)

DETAILS AND DIMENSIONS

TYPICAL INSTALLATION - Unit with Long Upper Housing.

LONG UPPER HOUSING

SHORT UPPER HOUSING

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 23

Item # _____________________________________

Quantity ___________________________________

C.S.I. Section 11400

F-20244 – Water Softening Systems – WS-40 Page 1 of 2

WATER SOFTENING SYSTEMS –

WS-40701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartservice.com

W A

T E

R S

O

FT

E N

IN

G

S Y

S T

E M

S

- W

S -40

FEATURES:

Operating Profile

Softener will remove hardness to less than 1/2 gpg when oper-ated in accordance with the operating instructions. The system includes two tanks. This duplex configuration operates with one tank on-line during service. During regeneration cycles, one tank will provide water to service and to the regenerating tank.

A water meter initiates system regeneration. The water meter measures the processed volume and is adjustable. Service flow is up-flow and regeneration flow is down-flow.

Regeneration Control Valve

The regeneration control valve is top mounted (top of media tank), and manufactured from non-corrosive materials. Con-trol valve does not weigh more than four pounds. Control valve provides service and regeneration control for two media tanks. Inlet and outlet ports accept a quick connect, double o-ring sealed adapter. Interconnection between tanks are made through the regeneration valve with a quick connect adapter.

Control valve operates using a minimum inlet pressure of 15 psi.

Pressure is used to drive all valve functions. No electric hook-up is required. Control valve incorporates four operational cycles including; service, brine draw, slow rinse, and a combined fast rinse and brine refill. Service cycle operates in an up-flow direc-tion. The brine cycle flows down-flow, opposite the service flow, providing a countercurrent regeneration. Control valve contains a fixed orifice eductor nozzle and self-adjusting backwash flow control. The control valve will prevent the bypass of hard water to service during the regeneration cycle.

Media Tanks

The tanks are designed for a maximum working pressure of 125 psi and hydrostatically tested at 300 psi. Tanks are made of en-gineered plastic with a 2.5 in. threaded top opening. Each tank is NSF approved. Upper distribution system is of a slot design.

Lower distribution system is of a flat plate design. Distributors will provide even flow of regeneration water and the collection of processed water.

Conditioning Media

Each softener will include uniform bead cation resin having a minimum exchange capacity of 30,000 grains/ft³ when regener-ated with 15.0 lbs/ft³. The media is solid, of a proper particle size and contains no plates, shells, agglomerates or other shapes, which might interfere with the normal function of the water softener.

Brine System

A combination salt storage and brine production tank is manu-factured of corrosion resistant, plastic. The brine tank has a chamber to house the brine valve assembly. The brine float assembly allows for adjustable salt settings and provides for a shut-off to the brine refill. The brine tank includes a safety over-flow connection to be plumbed to a suitable drain.

Salt Alarm

Salt alarm consists of an alarm box and a brine sensor. Brine sensor is mounted internally on the grid plate and operates on the specific gravity of proper brine concentration. An alarm condition is triggered when the concentration falls below ac-ceptable level for more than 15 minutes. The alarm is both an 80-db audible alarm every 3 seconds and a red LED flash every 7 seconds. The alarm box operates on three AA batteries and connects to the brine sensor with a standard 2-wire phone cord (7' phone cord supplied).

MODEL:

❑ Model WS-40 Specifications, Details and Dimensions on Back.

Model WS-40 Salt Alarm

Hobart WS40‐NOINSTALL () Item#: 1

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 8

1-888-4HOBART • www.hobartservice.com

Page 2 of 2 F-20244 – Water Softening Systems – WS-40

As continued product improvement is a policy of Hobart, specifications are subject to change without notice.

Printed On Recycled Pap

WATER SOFTENING SYSTEMS –

WS-40

F-20244 (REV. 10/09) LITHo IN U.S.A. (H-01)

System Components Media Vessel (qty) Size .............................................................(2) 6 x 13” Media Vessel Construction ........Fiberglass Wrapped Engineered Plastic Empty Bed Volume ........................................................................0.16 ft3

Media Type ....................................................Uniform Bead Cation Resin Media Volume ...............................................................................0.16 ft3

Bed Depth ....................................................................................Packed Free Board ...................................................................................... None Riser Tube ...................................................................................1” CPVC Distributor Upper ........0.012” Slots, Engineered Plastic Basket Lower ..........0.009” Slots, Stainless Steel Flat Plate Under bedding .................................................................................None Regeneration Control ..........................................Non-electric Use Meter Regeneration Type ............................................................Countercurrent Meter Type ................................0.30 - 25.00 gpm Polypropylene Turbine

Inlet Water Quality Pressure Range .......................................15 – 125 psi Dynamic Pressure Temperature Range ...............................................................35 – 160o F Temperature (Continuous) .............................................................150o F pH Range ..................................................................................5 – 10 SU Free Chlorine Cl2 (Max.) ..............................................................2.0 mg/l Hardness as CaCo3 (Max.) ...........................................................30 gpg

Operating Specs Flow Range (15 / 30 psig) .................................................9.1 – 15.2 gpm Flow Configuration ..................................................................Alternating Dimensions (width x depth x height) ...................................14 x 14 x 22” Weight (operating / Shipping) ...............................................110 / 60 lbs.

Connections Inlet / outlet Connections ..........................Custom Adapter and Bracket Drain Connection ..................................................................0.375” Tube Brine Line Connection ............................................0.375” Tube (internal) overflow Connection .............................................................0.375” Tube Power ...............................................................................................None Salt Alarm...........................................................................3 AA Batteries

System Part Numbers WS-40, Compact Cabinet Softener ......................................913091-123

Brine Tank Options Tank Description ...................................................................206 Cabinet Tank Height .........................................................................................22” Tank Footprint .............................................................................14 x 14” Material ...........................................................................................HDPE Salt Capacity ..................................................................................40 lbs.

Regeneration Specifications Regeneration Volume .................................................................5 gallons Regeneration Time ..................................................................11 minutes Backwash Flow Control ............................................................0.70 gpm Brine Refill Flow Control ............................................................0.20 gpm

14" 14"

21"

Disc Selection (Compensated Hardness*) Setting Capacity Efficiency Dosing Meter Disc 1 2 3 4 5 6 7 8

1.0 lbs. 2,527 grains 2,527 gr./lb. 5.5 lbs./ft3 4 8 11 15 19 23 27 30 Gallons/Regeneration: 583 282 194 146 117 97 83 73 Flow during regeneration (@ 15 psig): 9.1 9.1 9.1 9.1 8.4 6.6 5.4 4.4 *Compensated hardness in gpg = Hardness + (3 x Fe in mg/l)

1.75"

Hobart WS40‐NOINSTALL () Item#: 1

N Fl Eval Dish Hobart Budge ng # Edward Don & Company Page: 9

Hobart Disposer Model FD4-500+Buildup