Attachment B_ 55229BC_Currency Pallet Tops Diagram.pdf
PDF 27 KB Posted
- Attached to
- Currency Pallets & Tops
- Solicitation number
- Not on record
About this file
This is a technical drawing specification for a Currency Pallet Cap produced by the U.S. Department of the Treasury, Bureau of Engraving and Printing (BEP). The document is classified as nonpublic information and may not be duplicated or disclosed to third parties without express written consent from an authorized BEP representative.
The drawing provides detailed mechanical specifications for the pallet cap, including dimensional tolerances, cross-sectional views, and integral strapping notches. Key specifications include overall dimensions of 43.63 x 42.63 millimeters (with tolerance range 42.63-43.63), height of 33.75-32.75 millimeters, and integral strapping notches measuring 2.50 x 1.50 millimeters. The document establishes that all holes conform to H12 tolerance unless otherwise specified, with general tolerances of ±.25 for decimals to one place, ±.5 for two decimal places, ±.25 for three decimal places, and ±.125 for angles of ±5 degrees. A revision dated February 13, 2019 (Revision B) modified height requirements and tolerances for notch size and location. The drawing references ASME Y14.5-2009 interpretation standards and includes notes indicating that referenced areas should be smooth and free of voids to allow lifting by palletizer suction cups.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
16.50 15.50
11.75 10.75
AA
B
B
B
CUPS.
VOIDS TO ALLOW LIFTING BY PALLETIZER SUCTION
NOTES:
IT IS PREFERRED THAT AT A MINIMUM THE
REFERENCED AREAS ARE SMOOTH AND FREE OF
B
B 2019-02-13B
CHANGED TOLERANCES FOR NOTCH SIZE AND LOCATION
TJSCHANGED HEIGHT REQUIREMENT AS LONG AS STRENGTH IS MET
B
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
REVSIZE DWG NO
TITLE
SHEETSCALE DATE 2019-02-131:12
B
Currency Pallet Cap
55229BC
SURF TRTMT
MATL TRTMT
MATL
representative of the BEP. All rights, proprietary or otherwise, are reserved by the BEP.
INTERPRET DIM
BUREAU OF ENGRAVING AND PRINTING
OFFICE OF PRODUCTION ENGINEERING
.125.25.5
ANGLES.XXX.X .XXX/X
.25
See Technical Requirements Data Sheet
NONE
disclosed to any third party without the express written consent of an authorized
NONE
U.S. DEPARTMENT OF THE TREASURY
ALL HOLES TO H12 TOLERANCE UNLESS OTHERWISE SPECIFIED
14TH AND C STREETS SW WASHINGTON DC 20228 USA
DRAWN ALC
.5
INCHES
CHECKED TJS
DATE APPROVEDDESCRIPTIONREVZONE
REVISION HISTORY
SPECIFIED DIM ARE IN
STATUS
SHEET REV
CAGE CODE
88002
REVISION
UNLESS OTHERWISE
ASME Y14.5-2009
TOLERANCES UNLESS OTHERWISE SPECIFIED
AND TOL PER
Nonpublic Information: The information on this page is nonpublic information provided by the United States Department of the Treasury, Bureau of Engraving and Printing (“BEP”). As such, the information herein shall neither be duplicated nor
D4 A7, C4
B
B
43.63 42.63
2X 2.50
1.50 INTEGRAL
STRAPPING NOTCHES
A
SECTION A-A
0.13
A D
42.00 41.00
34.50 35.50
2X 2.50
1.50 INTEGRAL
STRAPPING NOTCHES
3.25
6.00 16.00
3.25
3.50
3.50
20.00
DETAIL D
SCALE 1 : 6
2.13
1.13 .75
.25
SECTION B-B
33.75 32.75
File details come from the government source that posted it. Updated .