Attachment A_55229BB_Currency Pallet Diagram.pdf
PDF 28 KB Posted
- Attached to
- Currency Pallets & Tops
- Solicitation number
- Not on record
About this file
This is a technical engineering drawing for a Currency Pallet produced by the U.S. Department of the Treasury, Bureau of Engraving and Printing (BEP). The drawing, dated February 13, 2019, depicts a pallet design with detailed specifications for dimensions, tolerances, and structural features used for handling and transporting currency.
The drawing includes multiple cross-sectional views (Sections A-A, B-B, and Detail D) with precise measurements in inches, including overall dimensions of approximately 43.63 inches by 42.63 inches, with a height specification of 35.50 inches. Key design features include integral strapping notches, hole tolerances of H12 unless otherwise specified, and angled tolerances of ±5°. The revision history indicates a single change (Revision B) on February 13, 2019, which modified the height requirement as it relates to strength specifications and adjusted tolerances for notch size and location. Standard tolerance specifications are provided for linear dimensions (.25, .125, .0625 inches) and angles (±.5°). The document is marked as nonpublic information and explicitly prohibits duplication or disclosure to third parties without written consent from an authorized BEP representative. All rights are reserved by the BEP.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
16.50 15.50
10.75 11.75
B
AND FREE OF VOIDS IF OTHER REQUIREMENTS LISTED
ON THE TECHNICAL REQUIREMENTS DATA SHEET ARE STILL MET.
B
NOTES:
REFERENCED DECK AREAS ARE THE MINIMUM AREAS THAT
SHALL BE SMOOTH AND FREE OF VOIDS TO ALLOW LIFTING BY
PALLETIZER SUCTION CUPS. A LARGER AREA MAY BE SMOOTH
B
A0.13
C 43.63 42.63
2X 2.50
1.50 INTEGRAL STRAPPING NOTCHES
B
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
REVSIZE DWG NO
TITLE
SHEETSCALE DATE 2019-02-13
NONE
1:12
Currency Pallet
55229BB
SURF TRTMT
MATL TRTMT
MATL
A5,B5,C2
CHANGED HEIGHT REQUIREMENT AS LONG AS STRENGTH IS MET
BUREAU OF ENGRAVING AND PRINTING
OFFICE OF PRODUCTION ENGINEERING
.125.25.5
ANGLES.XXX.X .XXX/X
.25
See Technical Requirements Data Sheet
NONE
BB
U.S. DEPARTMENT OF THE TREASURY
ALL HOLES TO H12 TOLERANCE UNLESS OTHERWISE SPECIFIED
14TH AND C STREETS SW WASHINGTON DC 20228 USA
DRAWN TJS
.5
INCHES
CHECKED ALC
DATE APPROVEDDESCRIPTIONREVZONE
REVISION HISTORY
SPECIFIED DIM ARE IN
STATUS
SHEET REV
CAGE CODE
88002
REVISION
UNLESS OTHERWISE
ASME Y14.5-2009
TOLERANCES UNLESS OTHERWISE SPECIFIED
AND TOL PER
INTERPRET DIM
CHANGED TOLERANCES FOR NOTCH SIZE AND LOCATION
disclosed to any third party without the express written consent of an authorized representative of the BEP. All rights, proprietary or otherwise, are reserved by the BEP.
2019-02-13 TJSB
Nonpublic Information: The information on this page is nonpublic information provided by the United States Department of the Treasury, Bureau of Engraving and Printing (“BEP”). As such, the information herein shall neither be duplicated nor
D8
SECTION B-B
24.50 23.50
2X 5.13 MAX
33.75 32.75
SECTION A-A
0.13 A
D
29.75 30.25 4.00 3.50
42.00 41.00
6X
A
0.13
B
34.50 35.50
2X 2.50
1.50 INTEGRAL STRAPPING NOTCHES
3.50
3.50
20.00
3.25
3.25
16.00
6.00
B
B
AA
B
DETAIL D
SCALE 1 : 6
5.38 6.13
.75 .25
File details come from the government source that posted it. Updated .