Attachment_-_Addendum_to_Specifications.pdf

ADDM-1, Page 1

ADDENDUM NO. ADDM-01 National Park Service – Interior Regions 3, 4 5 Facilities, Planning and Infrastructure to the 601 Riverfront Drive Bidding Documents Omaha, NE 68102 for 13 April 2023

INDIANA DUNES NATIONAL PARK – LAKE VIEW ACCESSIBILITY

Project Site : 12 E. Lake Front Drive, Beverly Shores IN 46301-0280 PMIS No. 216552/24338/216546 Drawing No: 80054

NOTICE TO BIDDERS: The Specifications and Drawings for the above referenced project are hereby amended as follows:

SPECIFICATIONS – GENERAL

ITEM NO. G-1 Specification Cover

a. Add the following under “Drawing No: 80054”:

“Project address: 12 Lakefront Drive, Michigan City, In 46301-0280”

ITEM NO. G-2 TABLE OF CONTENTS

a. ADD: “Division 10 – SPECIALTIES

INDU-Lake View Identity Sign Specification and Vendor List”

ITEM NO. G-3 ITEM 1 DESCRIPTION OF WORK.

a. Part 1.2.C, REPLACE entire Period of Performance paragraph with the following: “Period of Performance: Work shall be completed within 250 calendar days after the issuance of the Notice to Proceed inclusive of weather days. Period of performance to occur between, and not exceed, the period between Labor Day (2023) and Memorial Day (2024).

ITEM NO. G-4 DIVISION 10 - SPECIALTIES

a. ADD DIVISION 10 – SPECIALTIES

b. ADD: ADDM-01, Attachment: SD-01 INDU-Lake View Identity Sign Specification and Vendor List. <<See attached document.>>

DRAWINGS

ITEM NO. G-5 COVER SHEET

a. ADD the following under Indiana Dunes National Park:

“Project address: 12 Lakefront Drive, Michigan City, In 46301-0280”

ITEM NO. G-6 SHEET C8.0 DETAILS

a. REVISE DETAIL 2/C8.0 NPS SIGN DETAIL:

1. DELETE detail shown in it’s entirety.

2. REPLACE with the following note: “See Supplemental Drawing: ADDM-01, Attachment: SD-01 INDU-Lake View Identity Sign Specification and Vendor List for sign details and requirements."

END OF ADDENDUM <<See Attachments>>

Identity Signs

Indiana Dunes National Park

March 27, 2023

INDU-2023

Indiana Dunes National Park 1100 N. Mineral Springs Rd, Porter, IN 46304 kschluckebier Text Box ADDM-01 - Attachment: SD-01 INDU-Lake View Identity Sign Specification and Vendor List.

Park ID Sign with Custom Monolithic Base and Side Column Front amd Side Elevation

Notes:

8" x 6" x 1/8" Thick Steel Post with Welded 3/16" Thick Post Cap and Welded 13" x 11" x 1/2" Thick Steel Base Plate, Painted Black Bean Soup. .125" galvanized steel frame with suppport angles to attach sign to structure. Contrac-tor to determine frame design and must submit for approval. All mounting should be hidden. No bolts on sign face. Frame and post to be painted the same color.

Footer depth and dimension to be determined and engineered by contractor. Sign contractor to engineer footer, footer depth, rebar, footer substrate, concrete mix per local codes and to withstand local conditions.

2"

4"

56"

72"

30"

2'-6"

60"

8" 6"

GL

National Park Service U.S. Department of the Interior

Lake View

Indiana Dunes National Park

PMS 439

MP63855

National Park Service

Indiana Dunes National Park Description | Notes

Facility Sign

Project Number

INDU-2023

Drawing Date

03/28/2023

Location Number(s) 5.0

Scale

Not to Scale

Page

Single-sided with Blank Back, HDU Foam Panels with Routed Graphics, Dado, and Embedded Aluminum Arrowhead. Painted Steel Posts.

PMS 7531

MP63853

PMS Warm Gray 1

MP63854

PMS 449

MP63852

6.8" Arrowhead

1/4" Routed Dado

Panel Graphics Detail

Match Colors to Matthews Paint or Equivalent:

National Park Service

Indiana Dunes National Park Description | Notes

Facility Sign

Project Number

INDU-2023

Drawing Date

03/28/2023

Location Number(s) 5.0

Scale

Not to Scale

Page

Single-sided with Blank Back, HDU Foam Panels with Routed Graphics, Dado, and Embedded Aluminum Arrowhead. Painted Steel Posts.

56"

30" 4"

PMS 553

MP68240

PMS 1615

MP62376

PMS 1605

MP68246

White

MP32071

6"

Top View

8"8" 56"

Arrowhead Attachment Detail

Scale: 3" = 1' - 0"

Logo Artwork

Cut .125 Aluminum Plate to shape of the logos.

All edges ground smooth and clean. Surface and edge to be free of burrs and other defects. Arrowhead to be primed per aluminum manufacturers’ specifications and screened per color specifications. Final logo to receive Gloss Polyurethane Overspray finish. Logo backs to receive 3-1/4" x 3/4" threaded rods to embed into wood panel. Wood panel shall be flat routed to a depth of 1/8" to receive the logos so that it is flush to panel surface.

Match Colors:

Western Red Cedar Panel

.125" 6061-T Aluminum Logo Embedded into Sign Panel

#10-24 Stainless Steel Threaded Stud - Drill And Tap Letter (Rule Line) Back To Accept #10-24 Thread And Apply Thread-lock When Inserting Into Letter Back Note: Stud Length To Be Determined By Contractor Based on Mounting Surface.

1/16"

Align Logo with Panel Surface

National Park Service

Indiana Dunes National Park Description | Notes

Facility Sign

Project Number

INDU-2023

Drawing Date

03/28/2023

Location Number(s) 5.0

Scale

1/2" = 1' - 0"

Page

Single-sided with Blank Back, HDU Foam Panels

1-1.0C 1-1.0D 3/16" Thick Steel Brake Formed C-Channel

3/16" Thick Steel Z-Clips Attached to HDU Foam Panels

8" x 6" x 1/8" Thick Steel Post with Welded 3/16" Thick

Post Cap

1-1.0E

4-1.0E

3-1.0E

2-1.0E

17" x 11" Steel Base Plate Welded to Steel Post

2" x 2" x 3/16" Thick Steel Structural Angle, Center Support

4 7/8"

4 7/8" eq eq

CL

1/2"

GL

Painted HDU Foam Blank Back Panel

Painted HDU Foam Panel With Graphics

8" x 6" x 1/8" Thick Steel Post with Welded 3/16" Thick Post Cap and Welded 17" x 11" x 1/2" Thick Steel Base Plate, Painted Black Bean Soup

8"

1-1.0B Double Post Ground Mount Assembly

Typical Construction

1 1/2"

1 1/2" 3"

Steel C-Channel Support Structure, Painted NPS Black Bean Soup

Black Bean Soup Matthews Paint

MP63855

6"

2-1.0B Double Post Ground Mount Assembly

Typical Plan View

National Park Service

Indiana Dunes National Park Description | Notes

Facility Sign

Project Number

INDU-2023

Drawing Date

03/28/2023

Location Number(s) 5.0

Scale

1/2" = 1' - 0"

Page

Single-sided with Blank Back, HDU Foam Panels

Brake Formed C-Channel

3/16" Thick Steel Brake Formed C-Channel

1/2" Weep Hole (For Drainage)

3/16" Thick Steel Z-Clip

3/16" Thick Steel Z-Clip

#10 x 1" Long, Stainless Steel Pan Head Slotted Wood Screw

#10 x 1" Long, Stainless Steel Pan Head Slotted Wood Screw

1 1/2" Thick, HDU Foam Sign Panel

2" x 2" x 3/16" Steel Center Support

4 3/16"

3 1/16"

1 1/2" 3" 1 1/2"

6"

1-1.0C Panel / Frame Connection

Typical Section Cut

3/16" Thick Plate Steel

3"

1 - 1/2"

2-1.0C Brake Formed Channel Detail

1/2 Actual Size

National Park Service

Indiana Dunes National Park Description | Notes

Facility Sign

Project Number

INDU-2023

Drawing Date

03/28/2023

Location Number(s) 5.0

Scale

1/2" = 1' - 0"

Page

Single-sided with Blank Back, HDU Foam Panels

18"

1-1.0D Post Footer Detail

Scale: 1 1/2" = 1'-0"

2-1.0D 1/2" Thick Steel Base Plate Cut Detail

Scale: 1 1/2" = 1'-0"

1/

4"

1/ 4"

GL

3-1.0D 1/2" Thick Steel Base Plate

Backfill

18" x 24" Concrete Footer

Gravel Base (For Drainage)

6" (B as ed o n

L o ca l

C o d es a n d C o n d it io n

s) 6"

5/8" Diameter Mounting Holes (Qty: 4)

Note: Cut out Hole For Post

11" x 17" x 1/2" Thick Steel Base Plate eq

1/ 8" eq

1 1/4" eq6 1/8"eq

11"

3/16

3/16

1/2 - 13 Stainless Steel Hex Nut

1/2" Stainless Steel Flat Washer

17" x 11" x 1/2" Thick Steel Base Plate Welded to Post

1/2-13 x 12" Long Stainless Steel L-Hook Anchor Bolt

1/2 - 13 Stainless Steel Acorn Nut

3-1.0D Base Plate Connection Detail

Scale: 3" = 1'-0"

National Park Service

Indiana Dunes National Park Description | Notes

Facility Sign

Project Number

INDU-2023

Drawing Date

03/28/2023

Location Number(s) 5.0

Scale

1/2" = 1' - 0"

Page

Single-sided with Blank Back, HDU Foam Panels

3/16 3/16" Thick Brake Formed Channel

2" x 2" x 3/16" Thick Steel Corner Clip 6" x 8" x 1/8"

Thick Steel Post

3/16" Thick Steel Post Cap

3/16

2-1.0E Post Cap Attachment Detail1-1.0E Corner Clip Weld Detail

1/8" Thick Brake Formed Steel Post

3/16 8"

6"

4-1.0E Brake Formed Steel Post Detail

3/8-16 x 1" Long Stainless Steel Hex Head Cap Screw with Flat Washer Note: Drill and Tap Steel Post to Accept Screw

3-1.0E Channel to Post Attachment Detail

National Park Service

Indiana Dunes National Park Description | Notes

Facility Sign

Project Number

INDU-2023

Drawing Date

03/28/2023

Location Number(s) 5.0

Scale

1/2" = 1' - 0"

Page

Single-sided with Blank Back, HDU Foam Panels

1/4" Diameter Mounting Holes Along Short End of Clip

3/ 4"

1/4"

5/ 8"

2"

- 3

/8

2-1.0F

3/16" Thick Steel

4-1.0F

5/ 8"

2"

- 3

/8

3/ 4"

1/4"

CL

10" eqeq 10"

24"

5/ 8"

- 3

/8

2"

/8

10" eqeq 10"

24"

CL

3/16" Thick Steel

1/4" Diameter Mounting Holes Along Long End of Clip

3-1.0F Brake Formed Bottom Z-Clip Section

Scale: 3" = 1'-0"

2-1.0F Brake Formed Top Z-Clip Elevation

Scale: 1 1/2" = 1'-0"

4-1.0F Brake Formed Bottom Z-Clip Elevation

Scale: 1 1/2" = 1'-0"

1-1.0F Brake Formed Top Z-Clip Section

Scale: 3" = 1'-0"

3/16" Thick Steel

National Park Service

Indiana Dunes National Park Description | Notes

Facility Sign

Project Number

INDU-2023

Drawing Date

03/28/2023

Location Number(s) 5.0

Scale

1/2" = 1' - 0"

Page

Single-sided with Blank Back, HDU Foam Panels

Wood Panel

45° 45°

1/

2"

Wood Panel

1/

2"

3/ 8"

4-1.0G Routed NPS Rawlinson Typography Section Cut

Actual Size

3-1.0G Routed Frutiger Typography Section Cut

Actual Size

3-1.0G

4-1.0G

2-1.0H

3/8" Deep Routed Dado Line Under Overbar, Painted Same Color as Panel Background

National Park Service

Indiana Dunes National Park Description | Notes

Facility Sign

Project Number

INDU-2023

Drawing Date

03/28/2023

Location Number(s) 5.0

Scale

1/2" = 1' - 0"

Page

Single-sided with Blank Back, HDU Foam Panels with Routed Graphics, Dado, and Embedded

Typical HDU Foam ID Panel Details

Material Overview and Fabrication Specifications

Wood Western Red Cedar for NPS Park Identity Signs:

WRC for NPS Park Identity signs shall be laminated clear heart, kiln-dried vertical grain with a maximum moisture content not to exceed 12%. Cedar shall be selected per grading rules of the Western Red Cedar Lumber Associa-tion. Components of all panels including end caps shall be fabricated from the same grade.

Panel Size:

Sign panel shall be fabricated based on dimensions and format specified in the Sign Drawing Package. Panel sizes, specifications, dimensions, typography, color, and proportions shall not be altered.

Panel Assembly:

Panels shall be constructed using clear heart, vertical grain, kiln-dried wood through, glued up one board thick using 2" nominal size dimensional lumber (2" x 6", 2" x 8", 2" x 10"). Panels shall be glued using a phenolic resorcinol moisture resistant adhesive with all surface joints covered. Panels shall be clamped and cured for a minimum of 24 hours or per the manufacturers specifica-tions. Panel fabrication shall occur in air temperatures between 70 and 90 degrees Fahrenheit during drying, adhesive application, and curing.

After curing the panel vertical edges shall be finished with a 2" x 2" vertical end strip, faced glued and reinforced with 3", No 12 stainless steel Phillips flathead screws placed 8" on center. Screw heads shall be counter-sunk to a depth of 3/8" and filled with glue-in wood plugs.

After end strips have cured the panels shall be machine planed to a finish thickness of 1-1/2". All surfaces shall be finish sanded smooth and face and back edges shall rounded to a radius of 1/8".

Panels shall not be finished with hand planes, hand-held belt, orbital, or vibrating sanders.

Graphic Layout:

Graphic layout of panels shall be as shown on the attached drawings. Graphics to be accurately reproduced from plotted outline template or directly from computer to router based on full size digital vector art. Contractor shall use an accurate grid to ensure layout is aligned vertically and horizontally.

Typography shall be NPS Rawlinson Heavy and Frutiger Bold as shown on attached drawings. Typography shall not be altered, manipulated, or changed. Substitute fonts shall not be used.

NPS Rawlinson Heavy shall be Machine-routed unless otherwise specified with a 90 degree “V" router bit with a 1/8" vertical, flat sidewall inset. Routed letters shall conform to the same size artwork. Routing depth shall be uniform. Corners of type smaller than 3" cap height shall have a radius no greater than 0.0625. Type larger than 3" cap height shall have a corner radius no greater than 0.125".

Frutiger Bold typography shall be Machine-routed unless otherwise specified using a vertical-sided, flat-bottom router bit. Routing depth to be 0.375".

A 0.250" deep dado shall be routed in the panel between the main panel and the overbar. Dado height shall be determined based on cap height of main typography (0.0833 x cap height - .25" for 3", 0.333" for 4", .50 for 6"). Dado shall be routed in to the main panel field with the overbar being full height. Routed dado shall be painted same color as main panel field.

NPS Alternate Panel layouts receive a vertical dado in addition to the horizontal dado. Vertical dados shall be routed to a depth of 0.250". Vertical dado width shall be based on the cap height of main typography (0.0833 x cap height - .25" for 3", 0.333" for 4", .50 for 6").

Vertical dados shall be painted as specified below.

Panels receiving an NPS Arrowhead shall be Machine-routed to a depth of 0.125" using a vertical-sid-ed, flat-bottom router bit in Overbar section of panel for NPS Standard Panel layouts or Main Sign Panel for NPS Alternate layouts. Arrowhead shiloutte routed in the sign panel shall be oversized by 1/8" to accommodate inset NPS Arrowhead.

All routed type, dados, and insets shall be sanded smooth and clean. All edges shall be free of burrs and all edges eased prior to application of primer coats and paint.

Paint:

Prior to painting panels shall be Machine drum sanded.

Panels shall not be finished with hand planes, hand-held belt, orbital, or vibrating sanders. All sawdust and sanding residue shall be removed from the sign. Panel shall be properly cleaned per paint manufacturer’s instructions.

Panel surfaces shall be wiped clean using a Matthews (or approved equal) Speed Prep Cleaner formulated for use on wood. All panel surfaces shall be completely dry prior to primer application.

Panels shall be sprayed using a VOC compliant, Mathews White Epoxy Primer (or approved equal) on all surfaces.

Panels shall receive a minimum of two primer coats prior to top coat finishes. Primer coats shall be applied in strict accordance with the paint manufacturer’s specifications.

Final top coat colors shall be a Matthews Satin VOC, Semi Gloss finish applied per the graphic layouts. Panel colors shall be per NPS specifications.

1. Panel Overbar shall be Matthews MP63852, NPS River Rock, Satin VOC Semi Gloss (or approved equal). The Overbar color shall wrap to panel sides;

2. Main Panel Face, sides, panel back, and dado between panel face and overbar shall be Matthews MP 63853, Northwood Brown, Satin VOC Semi Gloss (or approved equal);

3. Panel Typography and Vertical Dado on NPS Alternate Panel layouts shall be Matthews MP63854, NPS Old Prairie, Satin VOC Semi Gloss (or approved equal). Edges between type, dados, and flat panel sections shall be clean and sharp. Ragged edges and transitions, drips, and oversprays and not acceptable.

After a top coat paint application all post and frame surfaces shall receive a Matthews (or approved equal) Satin Clear, MP281-228, Satin Polyurethane Finish. The finish shall be applied in strict accordance with the paint manufacturer’s specifications.

Steel Steel Sign Structure: Wood panels shall be attached to a steel post and steel mounting plate sytem. Sign assem-blies shall be fabricated with A-36, A-500B, or A-847 tubular steel upright posts (4" x 6" x 1/4" wall, 8" x 6" x 1/4" wall, or as otherwise specified)

Steel posts shall be mounted per the specified drawings and can include direct embedment of posts or baseplate mounting.

Steel post length shall be cut per specified drawings.

Posts shall be cut to allow flush alignment of post and sign panel.

National Park Service

Indiana Dunes National Park Description | Notes

Facility Sign

Project Number

INDU-2023

Drawing Date

03/28/2023

Location Number(s) 5.0

Scale

1/2" = 1' - 0"

Page

Single-sided with Blank Back, HDU Foam Panels

Steel mounting plate shall be fabricated with A-36, A-500B, or A-847, x 1/4" steel plate. Internal weld edges shall be welded clean and ground smooth.

Paint:

Prior to painting all steel components shall be sanded, sand blasted, or bead blasted to remove all oils, burrs, and rust. Rust shall be completely removed from all surfaces, edges, and corners. Exposed welds shall be ground clean and smooth. Cleaning of steel surfaces shall be in strict accordance with paint manufacturer’s specifications.

Prior to primer application all steel components shall be cleaned with a Matthews (or approved equal) Speed Prep Cleaner formulated for use on steel. All surfaces shall be completely dry prior to primer application.

After cleaning, all steel components shall be sprayed using a VOC compliant, Mathews White Epoxy Primer (or approved equal) on all surfaces. Components shall receive a minimum of two primer coats prior to top coat finishes.

Primer coats shall be applied in strict accordance with the paint manufacturer’s specifications.

Final top coat colors shall be a Matthews Satin VOC, Semi Gloss finish (or approved equal). Post and steel mounting plate colors shall be per NPS specifications or as otherwise specified on the drawings. Post and steel mounting plate assemblies shall receive a minimum of two top coat finishes.

Paint shall be applied smooth and clean with no oversprays, drips, paint runs, or bubbles. Paint shall be applied so that weep holes are clear and not plugged.

1. Sign posts and steel mounting plate shall be Matthews MP63855, NPS Black Bean Soup, Satin VOC Semi Gloss (or approved equal).

After final top coat paint applications all steel post and mounting plate surfaces shall receive a Matthews Satin Clear, MP281-228, Satin Polyurethane Finish (or approved equal). The finish shall be applied in strict accordance with the paint manufacturer’s specifications.

National Park Service

Indiana Dunes National Park Description | Notes

Facility Sign

Project Number

INDU-2023

Drawing Date

03/28/2023

Location Number(s) 5.0

Scale

1/2" = 1' - 0"

Page

Single-sided with Blank Back, HDU Foam Panels

The following are Harpers Ferry's vendor list:

Art Sign Works, Murrieta, CA

951-698-8484 info@artsignworks.com

Types of signs: ID, VIS

Materials: Routed Wood, HDU, Custom Metal

Arrowhead types: Wood, HDU

Color-Ad, Inc., Manassas, VA

703-369-3330 dgrogan@color-ad.com

Types of signs: MG, ID, VIS

Materials: Many/All

Arrowhead types: Aluminum, Wood, and HDU

Direct Embed Coating System LLC, Paterson, NJ

973-333-8988 info@directembedcoating.com

Types of signs: VIS, Small ID

Materials: Direct Print to Aluminum (powder coat), VIS bases

Gopher Sign Company, St. Paul Minnesota

800-383-3156 info@gophersign.com

Types of signs: VIS, Small ID

Materials: Direct Print to Aluminum, VIS bases

Interstate SignWays, Little Rock, AR

501-490-4242

Types of signs: MG

Materials: .080 Aluminum, .125 Aluminum, Extruded

Aluminum iZone Imaging, Temple, TX

254-778-0722 x107 leah@izoneimaging.com

Types of signs: VIS, Small ID

Materials: HPL, VIS bases

KVO Industries, Santa Rosa, CA

707-573-6868 keith@kvoindustries.com

Types of signs: VIS, Small ID

Materials: Porcelain panels, VIS bases

The Pannier Corporation, Gibsonia, PA

800-544-8428 x220 rlh@pannier.com

Types of signs: VIS, small ID

Materials: Fiberglass, Gel Coat Laminate, VIS bases

Sea Reach, LTD. Sheridan, OR

503-843-2005 susan@seareach.com

Types of signs: MG, ID, VIS

Materials: All

Arrowhead types: Aluminum, Wood, and HDU

SouthWood Corporation, Charlotte, NC

704-588-5000

Types of signs: ID

Materials: Routed Wood, ID bases

Arrowhead types: Wood, and HDU

UNICOR

The FAR states that UNICOR must be considered.

805-735-6213, 800-827-3168 (Order) unicor.sign.factory@usdoj.gov

Types of signs: MG, ID

Materials: .080 Aluminum, .125 Aluminum, Extruded

Aluminum

Arrowhead types: Aluminum, and HDU

Winsor Fireform LLC, Tumwater, WA

360-786-8200 info@winsorfireform.com

Types of signs: VIS, Small ID

Materials: Porcelain, VIS bases https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.artsignworks.com%2Fproducts%2Fproducts_services%2Fpromotions.html%3Fgclid%3DEAIaIQobChMIjcq53eDc9wIVjGpvBB3aWA4yEAAYASAAEgLJ8vD_BwE&data=05%7C01%7CKevin_Schluckebier%40nps.gov%7C0fbeba10dcf047e7cecc08db2fa6c858%7C0693b5ba4b184d7b9341f32f400a5494%7C0%7C0%7C638156165616727372%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=LgaaujcB0ow%2F9wqp2QsCkgFSZ3k5DDc1UpAbDcrZG60%3D&reserved=0 mailto:info@artsignworks.com https://gcc02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fcolor-ad.com%2F&data=05%7C01%7CKevin_Schluckebier%40nps.gov%7C0fbeba10dcf047e7cecc08db2fa6c858%7C0693b5ba4b184d7b9341f32f400a5494%7C0%7C0%7C638156165616727372%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=UIk1mKhs%2F%2FNybx38Ehyd6yVJPGve9nvezQJ6g1UC6J4%3D&reserved=0 mailto:dgrogan@color-ad.com https://gcc02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdirectembedcoating.com%2F&data=05%7C01%7CKevin_Schluckebier%40nps.gov%7C0fbeba10dcf047e7cecc08db2fa6c858%7C0693b5ba4b184d7b9341f32f400a5494%7C0%7C0%7C638156165616727372%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=kSKUsBU3qXUR0Jp%2Bpq%2F0EMeYPM8uHJ4UVKiNw%2BE99As%3D&reserved=0 mailto:info@directembedcoating.com https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.gophersign.com%2F&data=05%7C01%7CKevin_Schluckebier%40nps.gov%7C0fbeba10dcf047e7cecc08db2fa6c858%7C0693b5ba4b184d7b9341f32f400a5494%7C0%7C0%7C638156165616727372%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=hxgPyEzYEyaTJACOUhWLbqr%2FUBM%2Fv75kk1oQUQ92uu4%3D&reserved=0 mailto:info@gophersign.com https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.interstatesignways.com%2F&data=05%7C01%7CKevin_Schluckebier%40nps.gov%7C0fbeba10dcf047e7cecc08db2fa6c858%7C0693b5ba4b184d7b9341f32f400a5494%7C0%7C0%7C638156165616883593%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=e%2BB75qjStjFfbcq2tc4a%2Fbf64hh3WRZCHu9RBZySHnc%3D&reserved=0 https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fizoneimaging.com%2F&data=05%7C01%7CKevin_Schluckebier%40nps.gov%7C0fbeba10dcf047e7cecc08db2fa6c858%7C0693b5ba4b184d7b9341f32f400a5494%7C0%7C0%7C638156165616883593%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=NV27kZuXFxB2XE%2FH17m87MatC77oCbMMn97QQdOy0iY%3D&reserved=0 mailto:leah@izoneimaging.com https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.kvoindustries.com%2F&data=05%7C01%7CKevin_Schluckebier%40nps.gov%7C0fbeba10dcf047e7cecc08db2fa6c858%7C0693b5ba4b184d7b9341f32f400a5494%7C0%7C0%7C638156165616883593%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=ZsJLUCxCR0rZXcxNoaxLJb94U6EscJ0tZ89ETMt6t2g%3D&reserved=0 mailto:keith@kvoindustries.com https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpanniergraphics.com%2F&data=05%7C01%7CKevin_Schluckebier%40nps.gov%7C0fbeba10dcf047e7cecc08db2fa6c858%7C0693b5ba4b184d7b9341f32f400a5494%7C0%7C0%7C638156165616883593%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=JacOENgLoD19%2Bf59lp6v7snS0%2FpaOWM0NAF66Duaxv8%3D&reserved=0 mailto:rlh@pannier.com https://gcc02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.seareach.com%2Fhome%2Fblog.asp&data=05%7C01%7CKevin_Schluckebier%40nps.gov%7C0fbeba10dcf047e7cecc08db2fa6c858%7C0693b5ba4b184d7b9341f32f400a5494%7C0%7C0%7C638156165616883593%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=eYJXYiJp1zadNrqvBwe8z1pGJP6ZHkNwhSOgfv5vUkw%3D&reserved=0 mailto:susan@seareach.com https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.southwoodcorp.com%2F&data=05%7C01%7CKevin_Schluckebier%40nps.gov%7C0fbeba10dcf047e7cecc08db2fa6c858%7C0693b5ba4b184d7b9341f32f400a5494%7C0%7C0%7C638156165616883593%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=bz0SfK%2B6bx%2BrmrIm7UYb8Tyg9IKmlRnmJIZ0U3phjMU%3D&reserved=0 https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.unicor.gov%2FCategory.aspx%3FidCategory%3D1422&data=05%7C01%7CKevin_Schluckebier%40nps.gov%7C0fbeba10dcf047e7cecc08db2fa6c858%7C0693b5ba4b184d7b9341f32f400a5494%7C0%7C0%7C638156165616883593%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=DTx5Dcs3AsChFY0L22pOzlCvPeodil089dFci%2BFSoeo%3D&reserved=0 mailto:unicor.sign.factory@usdoj.gov https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.winsorfireform.com%2F&data=05%7C01%7CKevin_Schluckebier%40nps.gov%7C0fbeba10dcf047e7cecc08db2fa6c858%7C0693b5ba4b184d7b9341f32f400a5494%7C0%7C0%7C638156165616883593%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=HyCtlGWxPm6xQFH%2BISmz8x0jGdnPzgXkTKadMg%2Ff06M%3D&reserved=0 mailto:info@winsorfireform.com

Wood Product Signs, Parlin, CO

Telephone: 970-641-1675 accounting@woodproductsigns.com

Types of signs: MG, ID

Materials: .080 Aluminum, .125 Aluminum, Routed

Wood, ID bases

Arrowhead types: Aluminum, Wood, and HDU https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.woodproductsigns.com%2F&data=05%7C01%7CKevin_Schluckebier%40nps.gov%7C0fbeba10dcf047e7cecc08db2fa6c858%7C0693b5ba4b184d7b9341f32f400a5494%7C0%7C0%7C638156165616883593%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=iV62CjoYqJQpcPopmCJUiNsw%2FXyQkh7p2NGpmzehwPA%3D&reserved=0 mailto:accounting@woodproductsigns.com