Attachment A Technical Drawings.pdf
PDF 33 MB Posted
- Attached to
- U. S. Senate Mail Processing Conveyor System
- Solicitation number
- 2026-R-047
- Issued by
-
United States Senate
About this file
This is a technical drawings attachment for a replacement mail processing conveyor system being procured by the United States Senate, Office of the Sergeant at Arms under Request for Quotation 2026-R-047.
The document specifies seven categories of conveyor system components with detailed technical specifications for each. The components include an intermediate bed (LSB-34) measuring 120 inches long by 36 inches wide with 3-inch roller centers and standard roller bearings; a 90-degree curved bed (LSB-37) with speed-up spools and high-speed roller bearings; three intermediate PE accumulator beds (LSB-443, LSB-445, LSB-474) ranging from 60 to 120 inches long with 30-inch accumulation zones; a drive bed PE accumulator (LSB-473) with 75 FPM operating speed and 2 HP mounted control; a drive bed (LSB-477) with 70 FPM operating speed and 2 HP direct drive; an intermediate PE accumulator bed (LSB-478) measuring 30 inches long; and a right-angle two-way transition bed (LSB-479) with five transfer belts. All components feature 36-inch widths, 8-inch or 16-inch deep non-pop-out frames, and standard roller bearings unless otherwise specified. The technical drawings referenced in this attachment provide detailed visual specifications for each component to support the quotation submission deadline of July 30, 2026 at 12:00 PM ET.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Amendment 002 - Questions and Answers_2026-R-047.xlsx | XLSX spreadsheet | |
| Amendment 001- Instructions - RFQ 2026-R-047.pdf | ||
| Pricing Table - RFQ 2026-R-047.xlsx | XLSX spreadsheet | |
| Addendum to Commercial Agreements.pdf | ||
| Section 208 Compliance Certificate.pdf | ||
| Statement of Work - RFQ 2026-R-047.pdf | ||
| Purchase Order Clauses.pdf | ||
| Instructions - RFQ 2026-R-047.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Technical Drawings
Replacement Conveyor System Components Attachment A
The table below identifies each required component description and the corresponding technical drawing included in this attachment.
Section Reference No. Component Description Applicable Drawing
1 LSB-34 Intermediate bed, 120 inches long by 36 inches wide, with 3-inch roller centers, 8-inch-deep non-pop-out frames, standard roller bearings, no speed-up spools, and Paint Code 0000.
Technical Drawing - LSB-34
2 LSB-37 90-degree curved bed, 36 inches wide, configured for a 3-inch roller center system with 2-inch roller center setup, speed-up spools, 8-inch-deep non-pop-out frames, and high-speed roller bearings.
Technical Drawing - LSB-37
3 LSB-443
LSB-445
LSB-474
LSB-443: Intermediate PE accumulator bed, right-hand shaft, 60 inches long by 36 inches wide, with 3-inch roller centers, 30-inch accumulation zones, 8-inch-deep non-pop-out frames, standard roller bearings, and Paint Code 0000.
LSB-445: Intermediate PE accumulator bed, right-hand shaft, 120 inches long by 36 inches wide, with 3-inch roller centers, 30-inch accumulation zones, 8-inch-deep non-pop-out frames, standard roller bearings, and Paint Code 0000.
LSB-474: Intermediate PE accumulator bed, right-hand shaft, 60 inches long by 36 inches wide, with 3-inch roller centers, 30-inch accumulation zones, 8-inch-deep non-pop-out frames, standard roller bearings, and Paint Code 0000.
Technical Drawing - Intermediate PE Accumulator Bed
4 LSB-473 Drive bed PE accumulator, right-hand shaft, 60 inches long by 36 inches wide, with 3-inch roller centers, 30-inch accumulation zones, 8-inch-deep non-pop-out frames, standard roller bearings, 75 FPM operating speed, 2 HP mounted control, PS256A-03B1 control, and #800967 direct drive.
Technical Drawing - LSB-473
5 LSB-477 Drive bed, 36 inches long by 36 inches wide, with 3-inch roller centers, 8-inch-deep non-pop-out frames, standard roller bearings, no speed-up spools, 70 FPM operating speed, 2 HP direct drive, and no automatic frequency control.
Technical Drawing - LSB-477
6 LSB-478 Intermediate PE accumulator bed, right-hand shaft, 30 inches long by 36 inches wide, with 3-inch roller centers, 30-inch accumulation zones, 8-inch-deep non-pop-out frames, standard roller bearings, and Paint Code 0000.
Technical Drawing - LSB-478
7 LSB-479 Right-angle two-way transition bed, 48 inches long by 36 inches wide, with 3-inch roller centers, 16-inch-deep non-pop-out frames, five transfer belts, no extension, standard configuration, and no speed-up spool.
Technical Drawing - LSB-479
Note: No separate drawings were provided for LSB-445 or LSB-474. The intermediate PE accumulator bed drawing is associated with LSB-443, LSB-445, and LSB-474 based on the matching component family and dimensional configuration.
Section 1 - Intermediate Bed Reference No. LSB-34
Reference No. Description
LSB-34 Intermediate bed, 120 inches long by 36 inches wide, with 3-inch roller centers, 8-inch-deep non-pop-out frames, standard roller bearings, no speed-up spools, and Paint Code 0000.
Section 2 - 90-Degree Curved Bed Reference No. LSB-37
Reference No. Description
LSB-37 90-degree curved bed, 36 inches wide, configured for a 3-inch roller center system with 2-inch roller center setup, speed-up spools, 8-inch-deep non-pop-out frames, and high-speed roller bearings.
Section 3 - Intermediate PE Accumulator Beds Reference No.(s): LSB-443, LSB-445, LSB-474 Note: This drawing is associated with LSB-443, LSB-445, and LSB-474 because those references are within the same intermediate PE accumulator bed family.
Reference No. Description
LSB-443 Intermediate PE accumulator bed, right-hand shaft, 60 inches long by 36 inches wide, with 3-inch roller centers, 30-inch accumulation zones, 8-inch-deep non-pop-out frames, standard roller bearings, and Paint Code 0000.
LSB-445 Intermediate PE accumulator bed, right-hand shaft, 120 inches long by 36 inches wide, with 3-inch roller centers, 30-inch accumulation zones, 8-inch-deep non-pop-out frames, standard roller bearings, and Paint Code 0000.
LSB-474 Intermediate PE accumulator bed, right-hand shaft, 60 inches long by 36 inches wide, with 3-inch roller centers, 30-inch accumulation zones, 8-inch-deep non-pop-out frames, standard roller bearings, and Paint Code 0000.
Section 4 - Drive Bed PE Accumulator Reference No. LSB-473
Reference No. Description
LSB-473 Drive bed PE accumulator, right-hand shaft, 60 inches long by 36 inches wide, with 3-inch roller centers, 30-inch accumulation zones, 8-inch-deep non-pop-out frames, standard roller bearings, 75 FPM operating speed, 2 HP mounted control, PS256A-03B1 control, and #800967 direct drive.
Section 5 - Drive Bed Reference No. LSB-477
Reference No. Description
LSB-477 Drive bed, 36 inches long by 36 inches wide, with 3-inch roller centers, 8-inch-deep non-pop-out frames, standard roller bearings, no speed-up spools, 70 FPM operating speed, 2 HP direct drive, and no automatic frequency control.
Section 6 - Intermediate PE Accumulator Bed Reference No.(s): LSB-478
Reference No. Description
LSB-478 Intermediate PE accumulator bed, right-hand shaft, 30 inches long by 36 inches wide, with 3-inch roller centers, 30-inch accumulation zones, 8-inch-deep non-pop-out frames, standard roller bearings, and Paint Code 0000.
Section 7 - Right-Angle Two-Way Transition Bed Reference No. LSB-479
Reference No. Description
LSB-479 Right-angle two-way transition bed, 48 inches long by 36 inches wide, with 3-inch roller centers, 16-inch-deep non-pop-out frames, five transfer belts, no extension, standard configuration, and no speed-up spool.
| Section 1 - Intermediate Bed |
| Section 2 - 90-Degree Curved Bed |
| Section 3 - Intermediate PE Accumulator Beds |
| Section 4 - Drive Bed PE Accumulator |
| Section 5 - Drive Bed |
| Section 6 - Intermediate PE Accumulator Bed |
| Section 7 - Right-Angle Two-Way Transition Bed |
File details come from the government source that posted it. Updated .