Attachment_A_-_Plans (1).pdf

D

ES

IG

N

ED

B

Y:

D

RA

W

N B

Y:

CH

EC

KE

D B

Y:

D A

TE

RE

V

IS

IO

N

N O .B

Y

CK

A

PP

SC

AL

E:

D

AT

E:

as s ho w n

K a ns a s

D ep a rt m en t of

W il dl if e a nd

P a rk s nI in ee ri nI er

Xi Ee s eE ti on oW tJ

K a ns a s

Xe nW e�

Wi te op ek a K

BL

J

1.0

KDW- -R%�ECT N4"BER

D

D

P

K

P

D P ti tl e sJ ee t

SHEET

OF1 4

KANSAS DEPARTMENT OF WILDLIFE CPF PARKS

3/

/2

6EL DORADO STATE PARK

PLAYGROUND RESURFACING IMPROVEMENTS

PROJECT LOCATION

GOOGLE MAP SITE

LOCATION

CLICK HERE

CONTACT INFORMATION

PROJECT MANAGER:

Brandon Jacobs KDWP, Engineering Services brandon.jacobs@ks.gov C: (785) 631-0660

Brett Blackburn, Chief Engineer KDWP, Engineering Services brett.blackburn@ks.gov C: (785) 296-8404

PARK MANAGER:

El Dorado State Park Park Manager Shon.Pinard@KS.GOV O: (785) 250-4284

GENERAL NOTES

1. These notes, and other drawing notes contained herein, are provided to meet specific requirements and supplement the project specifications. These notes neither replace nor override the provisions and requirements of the project specifications.

2. The means of the work and the safety of the contractor's employees are solely the responsibility of the contractor. The contractor has a contractual obligation to comply with all applicable laws and regulations including those of OSHA. At no time will either the owner or the owner's representative take responsibility for the means of the work or the safety of the contractor's employees.

3. The contractor shall coordinate work with the owner to minimize disruption to the owner's facilities. Once the work has been started, the contractor shall complete the work without any interruptions. Construction activities are to be limited to the immediate work site. A staging and storage area will be available for the contractor's use on site.

4. Excavations have not been made to verify locations or depth of buried utilities. The exact location and elevation of all utilities must be determined by the contractor. The contractor shall contact "Kansas One Call System, INC." (1-800-344-7233) a minimum of 2 full working days prior to the start of construction for notification of utility owners and field location of all utilities. The contractor shall verify the elevation of possible conflicting utilities prior to construction. Overhead utilities and underground services generally are not shown.

5. The contractor shall furnish all labor, equipment, materials, and tools necessary to completely perform the work in a safe, expeditious, and workmanlike manner. All work shall be done to the lines, slopes, and grades indicated on the construction drawings. The contractor shall visit the site and familiarize himself/herself with the existing conditions before submitting his/her bid.

6. The contractor shall install materials per the manufacturer's recommendations unless noted otherwise. The contractor accepts full responsibility for the proper handling and installation of materials.

7. All project waste, including concrete rubble from miscellaneous structures, abandoned pipes, excess excavation, ect. shall be disposed of offsite by contractor.

8. Unless noted otherwise, existing utilities are to remain and shall be protected by the contractor during construction. The contractor shall exercise care to avoid damaging existing utilities during grading and construction activities.

9. Existing facilities (utilities, pavements, etc.) damaged by the contractor shall be repaired or replaced by the contractor at no additional expense to the owner.

10. All open excavations shall be protected with safety fence.

11.Positive drainage on the site is required throughout the project duration.

12.Traffic control devices must conform to the latest edition of the manual on uniform traffic control devices (MUTCD) and standards established by the Kansas department of transportation (KDOT).

13.If certain features are not fully shown or called for on the construction drawings or project specifications, their construction shall be of the same character as for similar conditions that are shown or called for, subject to the approval of the engineer.

Where sections vary, the contractor shall provide smooth transitions between them, unless noted otherwise.

14. The contractor is responsible for the transportation, unloading, storage, and management of all equipment unless noted otherwise. The contractor shall coordinate onsite storage with the owner. The contractor shall be responsible for the proper safeguarding of materials and equipment stored on the site to prevent theft, vandalism, or damage.

15. The contractor is responsible for the protection and maintenance of all permanent survey monuments and property irons in the project vicinity. If monuments are disturbed by planned construction, the contractor shall retain a Kansas-licensed land surveyor to re-establish the monuments and irons at the contractor's expense. Such monuments and irons shall be re-established by a licensed land surveyor in accordance with state laws.

16. All shop drawings provided shall be submitted to the Project Manager for review prior to the fabrication of material or the purchase of non-returnable stock.

Dimensional review is the Contractor's responsibility.

17. All materials are subject to the approval of the Project Manager.

SHEET INDEX

1.0 TITLE SHEET

2.0 SITE PLAN

3.0 PICTURES

4.0 GENERAL NOTES

https://www.google.com/maps/@37.8556469,-96.7882203,215m/data=!3m1!1e3?authuser=0&entry=ttu&g_ep=EgoyMDI2MDMwOS4wIKXMDSoASAFQAw%3D%3D

ES

IG

N

ED

B

Y:

D

RA

W

N B

Y:

CH

EC

KE

D B

Y:

D A

TE

RE

V

IS

IO

N

N O .B

Y

CK

A

PP

SC

AL

E:

D

AT

E:

as s ho w n

K a ns a s

D ep a rt m en t of

W il dl if e a nd

P a rk s nI in ee ri nI er

Xi Ee s eE ti on oW tJ

K a ns a s

Xe nW e�

Wi te op ek a

BL

J

2.0

KDW- -R%�ECT N4"BER

si te p la n

SHEET

OF2 4

N

Ŧǐ C

LE

AN

Ǫ%

T

AD

D

ED

5614#)' #0D 56#)+0) #4'#

D

D

P

K

P

D P

3/

/2

���� 537 (6

%1

%1

AutoCAD SHX Text

SCALE = 1" = 200'

AutoCAD SHX Text

%%USITE PLAN

ES

IG

N

ED

B

Y:

D

RA

W

N B

Y:

CH

EC

KE

D B

Y:

D A

TE

RE

V

IS

IO

N

N O .B

Y

CK

A

PP

SC

AL

E:

D

AT

E:

as s ho w n

K a ns a s

D ep a rt m en t of

W il dl if e a nd

P a rk s nI in ee ri nI er

Xi Ee s eE ti on oW tJ

K a ns a s

Xe nW e�

Wi te op ek a

BL

J

3.0

KDW� �R��ECT N��BER

de ta il s

SHEET

OF3 4

D

D

P

K

P

D P

3/

/2

ES

IG

N

ED

B

Y:

D

RA

W

N B

Y:

CH

EC

KE

D B

Y:

D A

TE

RE

V

IS

IO

N

N O .B

Y

CK

A

PP

SC

AL

E:

D

AT

E:

as s ho w n

K a ns a s

D ep a rt m en t of

W il dl if e a nd

P a rk s nI in ee ri nI er

Xi Ee s eE ti on oW tJ

K a ns a s

Xe nW e�

Wi te op ek a

BL

J

4.0

KDW� �R��ECT N��BER

SHEET

OF4 4

D

D

P

K

P

D P

3/

/2

I en er a l no te s a nd m a nW f dr a Y in

I

The Contractor shall field-verify all equipment fall heights prior to ordering or installing surfacing. Fall height shall be measured as the vertical distance from the highest designated play surface to the finished surfacing, consistent with ASTM F1487. The Contractor shall select, furnish, and install a surfacing system with an ASTM F1292-certified Critical Fall Height rating that meets or exceeds the verified fall height. Any errors in fall-height determination, surfacing selection, or certification shall be corrected by the Contractor at no cost to the Owner.

%%UMIRACLE RECREATION EQUIPMENT

ES

IG

N

ED

B

Y:

D

RA

W

N B

Y:

CH

EC

KE

D B

Y:

D A

TE

RE

V

IS

IO

N

N O .B

Y

CK

A

PP

SC

AL

E:

D

AT

E:

as s ho w n

K a ns a s

D ep a rt m en t of

W il dl if e a nd

P a rk s nI in ee ri nI er

Xi Ee s eE ti on oW tJ

K a ns a s

Xe nW e�

Wi te op ek a

BL

J

1.0

KDW� �R��ECT N��BER

is en

Jo Y er ta te P a rk pl a [I ro Wn d im po rX em ne ts ti tl e sJ ee t

SHEET

OF1 4

KANSAS DEPARTMENT OF WILDLIFE CPF PARKS

3/

/2

6EISENHOWER STATE PARK

PLAYGROUND RESURFACING IMPROVEMENTS

PROJECT LOCATION

GOOGLE MAP SITE

LOCATION

CLICK HERE

CONTACT INFORMATION

PROJECT MANAGER:

Brandon Jacobs KDWP, Engineering Services brandon.jacobs@ks.gov C: (785) 631-0660

Brett Blackburn, Chief Engineer KDWP, Engineering Services brett.blackburn@ks.gov C: (785) 296-8404

PARK MANAGER:

Eisenhower State Park Assistant Park Manager Bailey.L.Ham@KS.GOV O: (620) 450-7247

GENERAL NOTES

1. These notes, and other drawing notes contained herein, are provided to meet specific requirements and supplement the project specifications. These notes neither replace nor override the provisions and requirements of the project specifications.

2. The means of the work and the safety of the contractor's employees are solely the responsibility of the contractor. The contractor has a contractual obligation to comply with all applicable laws and regulations including those of OSHA. At no time will either the owner or the owner's representative take responsibility for the means of the work or the safety of the contractor's employees.

3. The contractor shall coordinate work with the owner to minimize disruption to the owner's facilities. Once the work has been started, the contractor shall complete the work without any interruptions. Construction activities are to be limited to the immediate work site. A staging and storage area will be available for the contractor's use on site.

4. Excavations have not been made to verify locations or depth of buried utilities. The exact location and elevation of all utilities must be determined by the contractor. The contractor shall contact "Kansas One Call System, INC." (1-800-344-7233) a minimum of 2 full working days prior to the start of construction for notification of utility owners and field location of all utilities. The contractor shall verify the elevation of possible conflicting utilities prior to construction. Overhead utilities and underground services generally are not shown.

5. The contractor shall furnish all labor, equipment, materials, and tools necessary to completely perform the work in a safe, expeditious, and workmanlike manner. All work shall be done to the lines, slopes, and grades indicated on the construction drawings. The contractor shall visit the site and familiarize himself/herself with the existing conditions before submitting his/her bid.

6. The contractor shall install materials per the manufacturer's recommendations unless noted otherwise. The contractor accepts full responsibility for the proper handling and installation of materials.

7. All project waste, including concrete rubble from miscellaneous structures, abandoned pipes, excess excavation, ect. shall be disposed of offsite by contractor.

8. Unless noted otherwise, existing utilities are to remain and shall be protected by the contractor during construction. The contractor shall exercise care to avoid damaging existing utilities during grading and construction activities.

9. Existing facilities (utilities, pavements, etc.) damaged by the contractor shall be repaired or replaced by the contractor at no additional expense to the owner.

10. All open excavations shall be protected with safety fence.

11.Positive drainage on the site is required throughout the project duration.

12.Traffic control devices must conform to the latest edition of the manual on uniform traffic control devices (MUTCD) and standards established by the Kansas department of transportation (KDOT).

13.If certain features are not fully shown or called for on the construction drawings or project specifications, their construction shall be of the same character as for similar conditions that are shown or called for, subject to the approval of the engineer.

Where sections vary, the contractor shall provide smooth transitions between them, unless noted otherwise.

14. The contractor is responsible for the transportation, unloading, storage, and management of all equipment unless noted otherwise. The contractor shall coordinate onsite storage with the owner. The contractor shall be responsible for the proper safeguarding of materials and equipment stored on the site to prevent theft, vandalism, or damage.

15. The contractor is responsible for the protection and maintenance of all permanent survey monuments and property irons in the project vicinity. If monuments are disturbed by planned construction, the contractor shall retain a Kansas-licensed land surveyor to re-establish the monuments and irons at the contractor's expense. Such monuments and irons shall be re-established by a licensed land surveyor in accordance with state laws.

16. All shop drawings provided shall be submitted to the Project Manager for review prior to the fabrication of material or the purchase of non-returnable stock.

Dimensional review is the Contractor's responsibility.

17. All materials are subject to the approval of the Project Manager.

SHEET INDEX

1.0 TITLE SHEET

2.0 SITE PLAN

3.0 PICTURES

https://www.google.com/maps/@38.5147354,-95.7409671,53m/data=!3m1!1e3?authuser=0&entry=ttu&g_ep=EgoyMDI2MDMwOS4wIKXMDSoASAFQAw%3D%3D

ES

IG

N

ED

B

Y:

D

RA

W

N B

Y:

CH

EC

KE

D B

Y:

D A

TE

RE

V

IS

IO

N

N O .B

Y

CK

A

PP

SC

AL

E:

D

AT

E:

as s ho w n

K a ns a s

D ep a rt m en t of

W il dl if e a nd

P a rk s nI in ee ri nI er

Xi Ee s eE ti on oW tJ

K a ns a s

Xe nW e�

Wi te op ek a

BL

J

2.0

KDW� �R��ECT N��BER

si te p la n

SHEET

OF2 4

N

�� C

LE

AN

���T

AD

D

ED

ŤǓ

Ťũ

ǓŤ

ŢŤ

Ũ

5614#)'� 56#)+0)� 561%KP+.' #4'#5

is en

Jo Y er ta te P a rk pl a [I ro Wn d im po rX em ne ts

3/

/2

���� 537 (6

%1

AutoCAD SHX Text

SCALE = 1" = 200'

ES

IG

N

ED

B

Y:

D

RA

W

N B

Y:

CH

EC

KE

D B

Y:

D A

TE

RE

V

IS

IO

N

N O .B

Y

CK

A

PP

SC

AL

E:

D

AT

E:

as s ho w n

K a ns a s

D ep a rt m en t of

W il dl if e a nd

P a rk s nI in ee ri nI er

Xi Ee s eE ti on oW tJ

K a ns a s

Xe nW e�

Wi te op ek a

BL

J

3.0

KDW� �R��ECT N��BER

de ta il s

SHEET

OF3 4

is en

Jo Y er ta te P a rk pl a [I ro Wn d im po rX em ne ts

3/

/2

ES

IG

N

ED

B

Y:

D

RA

W

N B

Y:

CH

EC

KE

D B

Y:

D A

TE

RE

V

IS

IO

N

N O .B

Y

CK

A

PP

SC

AL

E:

D

AT

E:

as s ho w n

K a ns a s

D ep a rt m en t of

W il dl if e a nd

P a rk s nI in ee ri nI er

Xi Ee s eE ti on oW tJ

K a ns a s

Xe nW e�

Wi te op ek a

BL

J

4.0

KDW� �R��ECT N��BER

SHEET

OF4 4

3/

/2

I en er a l no te s a nd m a nW f dr a Y in

I is en

Jo Y er ta te P a rk pl a [I ro Wn d im po rX em ne ts

The Contractor shall field-verify all equipment fall heights prior to ordering or installing surfacing. Fall height shall be measured as the vertical distance from the highest designated play surface to the finished surfacing, consistent with ASTM F1487. The Contractor shall select, furnish, and install a surfacing system with an ASTM F1292-certified Critical Fall Height rating that meets or exceeds the verified fall height. Any errors in fall-height determination, surfacing selection, or certification shall be corrected by the Contractor at no cost to the Owner.

ES

IG

N

ED

B

Y:

D

RA

W

N B

Y:

CH

EC

KE

D B

Y:

D A

TE

RE

V

IS

IO

N

N O .B

Y

CK

A

PP

SC

AL

E:

D

AT

E:

as s ho w n

K a ns a s

D ep a rt m en t of

W il dl if e a nd

P a rk s nI in ee ri nI er

Xi Ee s eE ti on oW tJ

K a ns a s

Xe nW e�

Wi te op ek a

BL

J

1.0

KDW� �R��ECT N��BER

ra

Y fo rd ta te

P a rk pl a [I ro Wn d im pr oX em en ts ti tl e sJ ee t

SHEET

OF1 4

KANSAS DEPARTMENT OF WILDLIFE CPF PARKS

3/

/2

6CRAWFORD STATE PARK

PLAYGROUND RESURFACING IMPROVEMENTS

PROJECT LOCATION

GOOGLE MAP SITE

LOCATION

CLICK HERE

CONTACT INFORMATION

PROJECT MANAGER:

Brandon Jacobs KDWP, Engineering Services brandon.jacobs@ks.gov C: (785) 631-0660

Brett Blackburn, Chief Engineer KDWP, Engineering Services brett.blackburn@ks.gov C: (785) 296-8404

PARK MANAGER:

Crawford State Park Park Manager Nick.Zafuta@KS.GOV@KS.GOV O: (785) 250-2832

GENERAL NOTES

1. These notes, and other drawing notes contained herein, are provided to meet specific requirements and supplement the project specifications. These notes neither replace nor override the provisions and requirements of the project specifications.

2. The means of the work and the safety of the contractor's employees are solely the responsibility of the contractor. The contractor has a contractual obligation to comply with all applicable laws and regulations including those of OSHA. At no time will either the owner or the owner's representative take responsibility for the means of the work or the safety of the contractor's employees.

3. The contractor shall coordinate work with the owner to minimize disruption to the owner's facilities. Once the work has been started, the contractor shall complete the work without any interruptions. Construction activities are to be limited to the immediate work site. A staging and storage area will be available for the contractor's use on site.

4. Excavations have not been made to verify locations or depth of buried utilities. The exact location and elevation of all utilities must be determined by the contractor. The contractor shall contact "Kansas One Call System, INC." (1-800-344-7233) a minimum of 2 full working days prior to the start of construction for notification of utility owners and field location of all utilities. The contractor shall verify the elevation of possible conflicting utilities prior to construction. Overhead utilities and underground services generally are not shown.

5. The contractor shall furnish all labor, equipment, materials, and tools necessary to completely perform the work in a safe, expeditious, and workmanlike manner. All work shall be done to the lines, slopes, and grades indicated on the construction drawings. The contractor shall visit the site and familiarize himself/herself with the existing conditions before submitting his/her bid.

6. The contractor shall install materials per the manufacturer's recommendations unless noted otherwise. The contractor accepts full responsibility for the proper handling and installation of materials.

7. All project waste, including concrete rubble from miscellaneous structures, abandoned pipes, excess excavation, ect. shall be disposed of offsite by contractor.

8. Unless noted otherwise, existing utilities are to remain and shall be protected by the contractor during construction. The contractor shall exercise care to avoid damaging existing utilities during grading and construction activities.

9. Existing facilities (utilities, pavements, etc.) damaged by the contractor shall be repaired or replaced by the contractor at no additional expense to the owner.

10. All open excavations shall be protected with safety fence.

11.Positive drainage on the site is required throughout the project duration.

12.Traffic control devices must conform to the latest edition of the manual on uniform traffic control devices (MUTCD) and standards established by the Kansas department of transportation (KDOT).

13.If certain features are not fully shown or called for on the construction drawings or project specifications, their construction shall be of the same character as for similar conditions that are shown or called for, subject to the approval of the engineer.

Where sections vary, the contractor shall provide smooth transitions between them, unless noted otherwise.

14. The contractor is responsible for the transportation, unloading, storage, and management of all equipment unless noted otherwise. The contractor shall coordinate onsite storage with the owner. The contractor shall be responsible for the proper safeguarding of materials and equipment stored on the site to prevent theft, vandalism, or damage.

15. The contractor is responsible for the protection and maintenance of all permanent survey monuments and property irons in the project vicinity. If monuments are disturbed by planned construction, the contractor shall retain a Kansas-licensed land surveyor to re-establish the monuments and irons at the contractor's expense. Such monuments and irons shall be re-established by a licensed land surveyor in accordance with state laws.

16. All shop drawings provided shall be submitted to the Project Manager for review prior to the fabrication of material or the purchase of non-returnable stock.

Dimensional review is the Contractor's responsibility.

17. All materials are subject to the approval of the Project Manager.

SHEET INDEX

1.0 TITLE SHEET

2.0 SITE PLAN

3.0 PICTURES

https://www.google.com/maps/@37.6438291,-94.8122283,91m/data=!3m1!1e3?authuser=0&entry=ttu&g_ep=EgoyMDI2MDMwOS4wIKXMDSoASAFQAw%3D%3D

ES

IG

N

ED

B

Y:

D

RA

W

N B

Y:

CH

EC

KE

D B

Y:

D A

TE

RE

V

IS

IO

N

N O .B

Y

CK

A

PP

SC

AL

E:

D

AT

E:

as s ho w n

K a ns a s

D ep a rt m en t of

W il dl if e a nd

P a rk s nI in ee ri nI er

Xi Ee s eE ti on oW tJ

K a ns a s

Xe nW e�

Wi te op ek a

BL

J

2.0

KDW� �R��ECT N��BER

si te p la n

SHEET

OF2 4

N

�� C

LE

AN

���T

AD

D

ED

ŤǓ

Ťũ

ǓŤ

ŢŤ

Ũ ra

Y fo rd ta te

P a rk pl a [I ro Wn d im pr oX em en ts

5614#)' #0D 56#)+0) #4'#

/aintain one lane for pWDliE aEEess

Pla[IroWnd ���� sSW ft

3/

/2

64#((+% %10641.

AutoCAD SHX Text

SCALE = 1" = 200'

ES

IG

N

ED

B

Y:

D

RA

W

N B

Y:

CH

EC

KE

D B

Y:

D A

TE

RE

V

IS

IO

N

N O .B

Y

CK

A

PP

SC

AL

E:

D

AT

E:

as s ho w n

K a ns a s

D ep a rt m en t of

W il dl if e a nd

P a rk s nI in ee ri nI er

Xi Ee s eE ti on oW tJ

K a ns a s

Xe nW e�

Wi te op ek a

BL

J

3.0

KDW� �R��ECT N��BER

de ta il s

SHEET

OF3 4

ra

Y fo rd ta te

P a rk pl a [I ro Wn d im pr oX em en ts

3/

/2

ES

IG

N

ED

B

Y:

D

RA

W

N B

Y:

CH

EC

KE

D B

Y:

D A

TE

RE

V

IS

IO

N

N O .B

Y

CK

A

PP

SC

AL

E:

D

AT

E:

as s ho w n

K a ns a s

D ep a rt m en t of

W il dl if e a nd

P a rk s nI in ee ri nI er

Xi Ee s eE ti on oW tJ

K a ns a s

Xe nW e�

Wi te op ek a

BL

J

4.0

KDW� �R��ECT N��BER

I en er a l no te s a nd m a nW f dr a Y in

I

SHEET

OF4 4

3/

/2

The Contractor shall field-verify all equipment fall heights prior to ordering or installing surfacing. Fall height shall be measured as the vertical distance from the highest designated play surface to the finished surfacing, consistent with ASTM F1487. The Contractor shall select, furnish, and install a surfacing system with an ASTM F1292-certified Critical Fall Height rating that meets or exceeds the verified fall height. Any errors in fall-height determination, surfacing selection, or certification shall be corrected by the Contractor at no cost to the Owner.

ra

Y fo rd ta te

P a rk pl a [I ro Wn d im pr oX em en ts