Attachment A- Location of the FORGE Site.pdf
PDF 678 KB Posted
- Attached to
- Waste Container and Removal at the Milford Site
- Solicitation number
- UU196077592-1
- Issued by
- Salt Lake County, Utah
About this file
Attachment A is a document from the University of Utah detailing the precise location and directions to the Utah FORGE (Frontier Observatory for Research in Geothermal Energy) site in central Utah. The document provides comprehensive geographical information, including a detailed set of driving directions starting from Milford, UT, which involve navigating through four specific road segments: UT-257 north, Geothermal Plant Road east, Antelope Point Road northeast, and Salt Cove Road east. The site is situated 217 miles south of Salt Lake City and 10 miles north-northeast of Milford.
The document includes technical specifications for well locations, presenting a table (Table 1) with precise geospatial coordinates for multiple wells at the site. The wells are documented with their easting, northing, latitude, longitude, and elevation data, using WGS84 and NAD83 coordinate systems. Specific wells listed include 16A(78)-32, 16B(78)-32, 56-32, 58-32, 78-32, 78B-32, and 68-32, with elevations ranging from approximately 1,650 to 1,705 meters. An aerial view (Figure 2) illustrates the well locations and planned drilling trajectory for the new well 16B(78)-32, which will be drilled from the same pad as its sister well 16A(78)-32.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| IFB UU196077592-1 Waste Container and Removal at the Milford Site.pdf | ||
| Attachment B Cost Proposal_Waste Container and Removal at the Milford Site.xlsx | XLSX spreadsheet | |
| Attachment C Safety Requirements.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment A Location of the Utah FORGE site
Directions to Location
The Utah FORGE is located 217 miles south of Salt Lake City and 10 miles NNE of Milford, UT.
Figure 1 shows the location of the Utah FORGE site in relation to Milford, UT. Starting from the intersection of UT-257 and UT-24 in Milford, directions and approximate mileages to the FORGE site are as follows:
1) Take UT-257 north for 4.4 miles.
2) Turn right (east) onto Geothermal Plant Road and continue for 2.7 miles.
3) Turn left (northeast) onto Antelope Point Road (paved) and continue for 3.5 miles.
4) Turn right (east) onto Salt Cove Road (well graded dirt road) and continue to the wellsite locations, following posted signs.
Figure 1. Utah FORGE general location. The inset is a zoomed in view starting from Milford, UT to the southwest in the inset (north is up).
Well Location
Figure 2 is an aerial view of the wells that have been drilled to date and the approximate spud location for well 16B(78)-32. 16B(78)-32 will be drilled from the same pad as 16A(78)-32.
Table 1 gives coordinates of installed wells.
Figure 2. An aerial view of the FORGE site. The approximate spud location for the new drill, well 16B(78)-32, is seen at the upper left. The trajectory will be similar to the horizontal projection of its sister well (well 16A(78)-32) appearing as a white, dashed line.
Table 1: Utah FORGE wellhead locations. Lat/Lon data use the WGS84 datum, and the UTM values use NAD83.
Well Easting (X) Northing (Y) Latitude Longitude Elevation (m)
16A(78)-32 334641.19 4263443.69 38.50402147 -112.8963897 1650.0
16B(78)-32 334642.72 4263479.52 38.50434511 -112.8963803 1650.7
56-32 335504.28 4263426.19 38.50402364 -112.8864923 1661.7
58-32 335450.99 4263037.91 38.50051644 -112.8870119 1684.8
78-32 335780.84 4262991.99 38.50016375 -112.8832204 1701.9
78B-32 335865.45 4262983.53 38.50010313 -112.8822486 1705.6
68-32 335485.75 4263154.53 38.50157333 -112.8866409 1685.7
File details come from the government source that posted it. Updated .