Attachment A - Ballistic Armored Response Vehicle Platform and List of EquipmentOptions.pdf
PDF 97 KB Posted
- Solicitation number
- 70B01C26Q00000136
About this file
This document is Attachment A specifying the salient characteristics and technical requirements for a Ballistic Armored Response Vehicle Platform.
The vehicle must be equipped with a 6.7L V-8 Turbo Diesel powertrain delivering a minimum of 350 horsepower at 3000 RPM and 800 foot-pounds of torque at 2000 RPM, paired with a 10-speed automatic transmission and electronic 4-wheel drive. Power-electrical systems must include dual-front and rear air conditioning and heating, two 320-amp alternators, dual 12 VDC batteries, LED strobe lights, a multi-tone siren/PA system with 200-watt speaker, interior white/red lens lights, a 2000-watt AC-DC power inverter, an intercom system, backup camera with monitor, minimum two rear interior electrical fans, and heated electric adjustable mirrors. The vehicle requires 335/85R20 run-flat tires rated to at least 70 MPH with 2-piece wheels and a compatible spare tire. The vehicle must operate across diverse terrain including mountainous, rocky, sandy, heavily wooded, and vegetated areas while meeting DOT regulations for over-road transport in New York, Florida, Texas, Arizona, California, and New Mexico.
The vehicle must meet Department of State Armor Level E with Mil Spec Steel A46100 armor exceeding B7/NIJ IV and .50 caliber multi-hit protection, including armored floor and fuel tank to defeat blast threats. The platform requires minimum ten optic-ready gunports (four each side, two rear), windows at least 2.5 inches thick, and a 360-degree rotating turret operable with one hand. Additional ballistic requirements include withstanding blasts from DM51 and DM31 grenades and impacts from 20mm fragment projectiles against steel. Interior specifications include seating for minimum eight passengers with seat belts for all, under-bench storage with tie-offs, adjustable three-position stand for roof hatch access, center console for electrical equipment, full ceiling insulation with heat and sound reduction, tilt wheel, and cruise control. The exterior requires six doors (four side doors and one dual rear door) with open-hold locks, flip-forward front hood, black exterior color, six D-ring tie-down points on handrails, mil-spec steel-backed exterior lights, nonslip tactical roof surface, emergency exit door-lock override, and front ram bumper with guards.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
“ATTACHMENT A”
Ballistic Armored Response Vehicle Platform and List of Equipment/Options (Salient characteristics)
Power Train must meet or exceed the below requirements:
• 6.7L V-8 Turbo Diesel
• Horsepower no less than 350 @ 3000 RPM
• Torque no less than 800 Ft lbs. @ 2000 RPM
• Transmission 10 Speed Automatic w/ OD
• Drive Axles 4-Wheel Drive (Electronic)
• Tow Haul feature with compression brake to assist when towing.
Power-Electrical must meet or exceed the below requirements:
• Dual-Front and Rear Air Conditioning & Heating
• Alternators (2) -320 Amps
• Electrical 12 VDC - Dual Batteries
• Must be equipped with LED Strobe Lights
• Siren/P.A. System Multi-Tone - 200 Watt Speaker
• Interior Lights White/Red Lenses
• 2000 Watt AC-DC Power Inverter
• Must have an Intercom System Inside/Out
• Back up Camera System with Monitor
• Rear interior electrical fans, no less than (2) for adequate air flow.
• Heated electric adjustable driving mirrors.
Must meet or exceed the following Tires & Wheel requirements:
• 335/85R20 Tires/ 2 Piece Wheel, run flat/speed rated tires (to at least 70 MPH)
• Spare Tire-Run Flat compatible with the rest of the tires on vehicle.
Performance Requirements the vehicle must meet or exceed:
• Vehicle must be able to operate within a variety of geographical terrain to include mountainous, rocky, sandy, heavily wooded, and lush vegetation.
• Vehicle must be able to clear DOT regulations in multiple CONUS states to be driven over the road to include NY, FL, TX, AZ, CA, and NM.
Minimum Ballistic Capabilities and Counter Assault Systems Requirements:
• Ballistic Capabilities must meet or exceed Department of State Armor Level E.
• Mil Spec Steel A46100 armor to exceed B7/NIJ IV and .50 caliber multi-hit.
• Floor & Fuel Tank Armored to defeat Blast.
• Optic Ready Gunports, no less than (10): 4 each side / 2 rears
• Windows must be no less than 2.5 inches thick (66mm)
• 360 Degree Rotating Turret system (must be able to be operated with one hand)
• Heavy duty military grade gear bearings for rotating roof hatch
FELECIA BEAMEN
Cross-Out
• Able to withstand a blast from a DM51 Grenade and a blast from a DM31.
• Withstand an impact from a 20mm fragment projectile against steel (two shots).
Minimum Interior Requirements:
• Seating at rear for no less than (8)
• Seat Belts for all passengers
• Storage-Under bench seats & Tie-Offs
• Adjustable height, flush to floor (3-position) stand- access to Roof Hatch/Turret
• Center located Console for All Switches & other Electrical Equipment
• Insulation- Full Ceiling with Headliner
• Heat and sound reducing insulation.
• Tilt Wheel to accommodate fully kitted operators.
• Cruise Control
• Extreme heat reducing insulation and sound reduction.
Minimum Body/Exterior Requirements:
• 6 Doors – (4 side doors & 1 dual rear door) with open-hold locks/latches
• Must have a Flip Forward Front Hood.
• Exterior Color – Black
• D-Ring type tie down points on handrails, total of (6): three (3) at each side.
• All Exterior Lights backed by Mil Spec Steel
• Nonslip tactical surface roof.
• Emergency exit door-lock override.
• Front Ram Bumper with Bumper Guards
File details come from the government source that posted it. Updated .