ATTACHMENT 7 - Recommended Equipment List.xlsx

50Gbps backplane bandwidth Supports future 8K video New WindoWall® mode Supportss splicing wall applications Abundant local board cards, twisted pair and fiber input/output matrix boards are available Supports HDR Video Resolution Max. 8K 7680 x4320@60HZ,Chroma Sampling 4:4:4 RS-232 insertion from the Ethernet control port is Supportsed Extron XTP II CrossPoint 3200 Frame 1 1. The core signal routing system is upgraded to optical fiber matrix, and the whole system provides high-performance 4K/60 video, audio, USB, control and 3D synchronization signal switching through optical fiber.

2. The implementation of Plan B requires that the original CATx cables of all nodes in the site be replaced with optical fibers, involving all signal points.

Advantages:

1, as a mdium transmission loss is small, easy wiring, low heat dissipation system, strong versatility and widely used, transmission distance fully meet.

2, strong anti-interference ability, signals are isolated transmission, no electromagnetic interference.

3, high transmission bandwidth, widely applicable to the current mainstream signal, support 4K60 4:4:4 lossless transmission, fully meet the future upgrade of 8K video signal transmission requirements.

Disadvantages:

It will damage the wall, need to reinstall the pipeline, the overall cost is higher.

1. Replace the mixed matrix system of the same type as the original system, but upgrade it to 4K signal (correspondingly replace the wall panel, receiver and transmitter).

2. Delete the jumper (Patch Panel）.

A-1-2 8K HDMI Input Board Card Supports stereo 4 Channel HDMI Input with stereo audio Supports HDR Video Resolution Max. 8K 7680 x4320@60HZ,Chroma Sampling 4:4:4 HDCP 2.3 standard Automatic Equalization Automatic Re-clocking

Supportss computer and video signals with resolution up to 4K/60 and 4:4:4 HDCP 2.3 standard Supportss HDR - high dynamic range video Multi-channel audio mixing Dante® audio output is available over standard Internet protocols for signal transmission using LAN

transmission video, audio, bi-directional RS-232 and infrared and Ethernet signals up to 100 m (330') with CATx shielded cable Supportss computer and video signals up to 4K resolution HDCP 2.3 standard

Supports 12G‑SDI、6G‑SDI、3G‑SDI 和 HD‑SDI signals self-adaption SMPTE 和 ITU digital video standard Supports Data rates from 1.49 Mbps to 11.88 Gbps SDI with HDMI loop output

transmission video, audio, bi-directional RS-232 and infrared and Ethernet signals up to 100 m (330') with CATx shielded cable Supportss computer and video signals up to 4K resolution HDCP 2.3 standard

Supportss computer and video signals with resolution up to 4K/60 and 4:4:4 HDCP 2.3 standard Supportss HDR - high dynamic range video Multi-channel audio mixing Dante® audio output is available over standard Internet protocols for signal transmission using LAN

Supports HDR Video Resolution Max. 8K 7680 x4320@60HZ,Chroma Sampling 4:4:4 HDCP 2.3 standard Automatic Equalization Automatic Re-clocking

transmission video, audio, bi-directional RS-232 and infrared and Ethernet signals up to 100 m (330') with CATx shielded cable Supportss computer and video signals up to 4K resolution HDCP 2.3 standard

transmission video, audio, bi-directional RS-232 and infrared and Ethernet signals up to 100 m (330') with CATx shielded cable Supportss computer and video signals up to 4K resolution HDCP 2.3 standard

transmission video, audio, bi-directional RS-232 and infrared and Ethernet signals up to 100 m (330') with CATx shielded cable Supportss computer and video signals up to 4K resolution HDCP 2.3 standard

transmission video, audio, bi-directional RS-232 and infrared and Ethernet signals up to 100 m (330') with CATx shielded cable Supportss computer and video signals up to 4K resolution HDCP 2.3 standard

It can provide additional protection against external interference and ensure high quality signal transmission Designed to ensure uncompressed HDMI 2.0b signal integrity S/FTP design, 4 shielded twisted pair wrapped in the overall woven shielding layer 22 AWG copper conductor

High Performance Category 6A RJ-45 Plug Metal casing and grounding design Suitable for high electromagnetic interference/radio frequency interference environment Compatible with TIA/EIA 568A/B standards Core alignment device reduces crosstalk and signal interference Extron XTP DTP 24 Plug 5

Image Sensor (Number of Effective Pixels)Approx. 8.5M pixels Compression FormatH.264: High/Main/Baseline Profile H.265: Main Profile Maximum Frame RateH.264: 60fps H.265: 60fps Protocols：IPv4, IPv6, TCP, UDP, ARP, ICMP, HTTP, HTTPS, DHCP, DNS, RTP/RTCP, RTSP, VISCA over IP, SRT 4K Video OutputHDMI x1, IP (streaming) x1 HD Video Output3G-SDI x1, HDMI x1, IP (streaming) x1 SD Video OutputIP (streaming) x1 SONY SRG-A12 3

1. The transmitter and receiver on the wall are replaced with optical fiber system.

2, the camera can be upgraded to 40x zoom AI camera,

VISCA RS-422 Interface: 9-pin LAN: Automatically detects RJ-45, 10BASE-T/100BASE-TX Tally Input/Contact output: 9 pins Control signal format 9,600 bps/38,400 bps (for RS-232C/RS-422 communication) VISCA via IP communication

transmission video, audio, bi-directional RS-232 and infrared and Ethernet signals up to 100 m (330') with CATx shielded cable Supportss computer and video signals up to 4K resolution Supports audio control and HDMI loop HDCP 2.3 standard Supports remote power supply

Supports 4K/60 @ 4:4:4 Chroma Sampling Supports for HDMI 2.0b parameter standards, including up to 18 Gbps data rate, HDR, up to 12 bit color depth, 3D, HD lossless audio format, and CEC passthrough HDCP 2.3 standard The EDID Manager automatically manages EDID communication between connected devices

USB peripheral signal is extended point-to-point to 100 m (330') distance via a single CATx cable Supportss USB 2.0 to 1.0 devices with data rates up to 480 Mbps, and is compatible with USB 3.0 devices that can operate at USB 2.0 data rates A choice of rack-mounted and structure-mounted models is available

USB peripheral signal is extended point-to-point to 100 m (330') distance via a single CATx cable Supportss USB 2.0 to 1.0 devices with data rates up to 480 Mbps, and is compatible with USB 3.0 devices that can operate at USB 2.0 data rates A choice of rack-mounted and structure-mounted models is available

HDMI inputs Supports computer and video signals up to 4K/60 resolution Video resolution up to 4K/30 USB output to meet common software codec requirements Use of Universal USB drivers provides device USB 5 Gbps for universal compatibility Integrated audio mixing, level and mute control

2 Channel 12G-SDI output supports open ProRes 4444 For professional Ultra HD fill and key signals. HDMI ports and ProRes and DNx file formats allow switching between SD, HD and Ultra HD TV formats.

Like the others, it can record SD and HD images in H.264, but switches to H.265 for Ultra HD.

Supports Digital noise reduction

HDMI Supports video signals up to 4K resolution

2.0 software makes it easier to add, remove, and change shared content Self-learning allows you to share content across multiple ShareLink Pro devices When the user is not connected, the digital identity function can display the billboard content. WebShare™ lets you share content through a Web browser

HDMI input HDMI and HDBaseT output Supports up to 4K/60 @ 4:4:4 resolution

4K X-Reality PRO Technology to improve quality X-Motion Clarity Control: RJ45 IP，network API，RS-232C

MAC table Up to 8,192 Media Access Control (MAC) addresses QoS

VLAN

Auto voice VLAN Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) Umbo frame Frame sizes up to 9,216 supported Automatic Media-Dependent Interface Crossover (MDIX) Multicast Internet Group Management Protocol (IGMP) Versions 1, 2, and 3 Snooping IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router

CISCO CBS220-24FP-4X-CN 2

Fully recallable, 40-input, 32-channel digital mixing console Built-in AVB networking creates a complete ecosystem with PreSonus NSB stage boxes, EarMix 16M personal monitor mixers, and SW5E AVB switch Built-in 128-channel (64x64) USB interface—the most of any digital mixer on the market Onboard multitrack SD Card recorder with true Virtual Soundcheck 16 FlexMixes (aux mixes, subgroups, or matrix mixes) FLEX FX multi-effects processor with 4 slots to load legendary reverb emulations and delays with 4 dedicated effects buses Complete professional solution: suite of integrated software, including Studio One® Artist DAW and Capture® Presonus StudioLive 32S 1 1. Be consistent with Plan A 1. Retain the original cabinet jumper(Patch Panel) system

2. Retain the original sound mixer and monitoring system

3. Replace part of the hand-held microphone A-3-2 Digital Audio Processor 12 Channel Microphone input/line input 8 Channel output 12 Channel AEC Compatibility Microsoft Teams Rooms Compatibility Zoom Rooms Compatibility Logitech Roommate Configurable USB audio interface Dante Domain Manage Dante and AES67 network audio expansion capability 8Channel VoIP for supports the common session initiation Protocol

100˚(H) x 60˚(V) EBM waveguide for wide sweet spot Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing 70 watt, Class AB biamplification 102 dB maximum continuous SPL, with 48 Hz to 20 kHz frequency response Acoustic Tuning controls: HF (±6 dB, continuously variable); Midrange (±6 dB, continuously variable), and Acoustic Space (flat, -2, -4 dB), plus highpass filter (Off, 80 Hz, 100 Hz) RF interference, output current limiting, over-temperature, transient, subsonic protection and amplifier “soft start” feature (eliminates popping on power-up) Internal power supply with IEC connector and power switch with on/off LED Balanced XLR and ¼-inch inputs and unbalanced RCA inputs

130 W (rms) continuous program

106 dB, 1 m (linear)

Drivers Woofer (1) 6.5" (165 mm) polypropylene cone with moisture resistant coating Tweeter (1) 0.75" (19.1 mm) PEI dome Rotary switch taps 70 V: 64 W, 32 W, 16 W, 8 W, 8 ohms direct 100 V: null, 64 W, 32 W, 16 W, 8 ohms direct

ENERGY STAR® certified amplifiers Convection-cooled fanless operation - can be stacked on top of each other without additional rack ventilation space 1U half-rack width enclosure with 4 channels - single and double rack mount hardware included Disabling auto-standby and fast wake-up functions

AES256-bit encryption technology is used in applications where secure transmission is required Shure's proprietary gain correction technology optimizes the system dynamic range of all input sources, eliminating the need to adjust transmitter gain The battery can work for more than 12 hours, with accurate measurement and zero memory effect.

External transmitter charging (using SBC200 dual-unit charger) 2 AA batteries for 11 hours of continuous use 5-stage battery level indication (for non-Shure brand batteries) Backlit LCD screen for easy menu navigation and control 100 m (300 ft) operating range 4-pin TQG connector Robust metal construction design Detachable 1/4 wavelength antenna

AES256-bit encryption technology is used in applications where secure transmission is required Patented gain correction technology optimizes the system's dynamic range including all input sources, eliminating the need to adjust transmitter gain Greater than 120dB dynamic range Transmit power available in 1, 10 and 20 mW (region-dependent) 5-segment battery level display External transmitter charging (using SBC200 dual-unit charger) 2 AA batteries for 11 hours of continuous use Backlit LCD screen for easy navigation and control 100 m (300 ft) working range

Each channel has independent gain control, LED meters, and XLR outputs Up to 72 MHz tuning range (depending on region) Digital pre-switch diversity High-density mode enables ULX-D systems to optimize the ability to use more compatible channels, with operating distances of up to 30 meters in high-density mode An RF cascade port assigns an RF signal to another device Optimized scanning technology enables automatic finding, sorting and assignment of the clearest available frequencies, and synchronization with the transmitter via IR functionality.

Bodypack frequency diversity ensures uninterrupted audio signal transmission in mission-critical applications AES 256-bit encryption can be enabled to ensure secure signal transmission Audio coalescing routes two or more audio channels to multiple receiver output combinations. Use the gain adjustment of each channel to achieve the desired audio mix.

The DANTE™ Digital Audio Transport Network feature enables audio networking over Ethernet Ethernet networking simplifies frequency coordination and deployment across multiple receivers Both the receiver and WWB6 provide interference detection and alerting Up to 60 dB per channel with independently adjustable gain Wireless Workbench ® 6 software integration enables advanced frequency coordination planning and monitoring capabilities Compatible with AMX/Crestron control Compatible with AXT600 Axient™ Spectrum Manager Intuitive front panel LCD menu and control lock function Upgraded LCD display with adjustable contrast and brightness Audio and RF LED level meters with peak indicators Switchable mic/line level outputs

Two-way wireless connectivity provides audio between meeting units and real-time control of all settings Operates in the 2.4 GHz/5 GHz band, including DFS spectrum Automatic frequency coordination, interference detection and avoidance Dante Digital Audio (10 in/10 out) Analog Audio Input and Output (XLR) An Ethernet cable for audio, control, and PoE power AES-128 encryption enhances privacy Display without a laptop for basic system configuration LEDs indicate power, wireless connection, and network status

10-pin modular lockable connector for MXC series gooseneck microphones When the microphone is activated, the built-in speaker remains on Voice and mute/function buttons with LED status indicators NFC ID card slot used to identify participants Dual 3.5mm headphone jacks with volume control

10-pin modular interface with lock The neck is curved only at the bottom Lengths of 16 in. (40 cm), 20 in. (50 cm) and 25 in. (60 cm) Cardioid polar pattern A two-color light ring indicates microphone status CommShield® technology provides excellent RF noise immunity

Powered the wireless conference unit for more than 11 hours The 5-segment LED indicator on the battery shows the status of the charge

The 5-segment LEDs on this unit separately display the charging status of each battery The RJ-45 Ethernet connection enables remote monitoring of battery charging status in hours and minutes via the Microflex Complete Wireless user interface Charge 10 batteries to 50% in 1.5 hours and to 100% in 4 hours The optional storage mode partially discharges the battery for long-term storage or transport Includes hardware for wall and rack mounting IEC power cord included SHURE MXCWNCS-CHN 2

135 W per channel (6 ohms, 1 kHz, 10% THD, 1-ch driven)

CINEMA DSP COMPATIBLE WITH HD AUDIO

Bluetooth compression sound quality enhancement

Frequency response (-3dB): 65Hz ~ 30kHz;

Coverage angle (-6dB): 90° cone;

Load power: 90W;

Sensitivity: 91dB;

Maximum sound pressure level: 117dB;

8,000 lumens (center brightness)* 10,000:1 contrast ratio (dynamic) 4K-UHD resolution 3D Video HDBaseT 40,000 hours / 30,000 hours / 20,000 hours (Eco Mode 2 / Eco Mode 1 / Standard Mode) 1 x 0.66" WQXGA+ TRP UHD DMD DisplayPort 1.2 & HDBaseT *Note: Determined according to ISO21118 international quality standard Digital Projection E-Vision Laser 4K 1 1. All three projectors were replaced with 4K models

2. The projection screen is old

4K X-Reality PRO Technology to improve quality X-Motion Clarity Control: RJ45 IP，network API，RS-232C

Adopt "ring hand-in-hand" connection technology Simultaneous interpretation in no less than 60 languages High-pass filter Direct translation and indirect translation are supported Has automatic indirect translation function The name of each channel language can be preset by the host or application software Has an LCD screen to display information No less than 5 input language channels can be preset Has a channel selection knob Can be preset no less than 3 translation output channels Electret cardioid polar microphone with an open bean . Mini microphone with anti-drop-off structure of microphone draft shield The microphone that has been turned on can be gained through the application software or the conference host Built-in IC card reader Built-in speaker and has volume adjustment knob With the same channel interlock function, to ensure the uniqueness of the output channel You can choose to turn on the microphone at the interpreter desk in the same interpreter room and automatically turn off the microphone of the previous interpreter desk It has a silent (cough) function Has a speech rate reminder button Has a call button With memory, listening function .Has a key prompt tone on the key The same brand as the main equipment TAIDEN HCS-4385U/50 2 1. Be consistent with Plan A 1. Keep the original system and continue to use it

2. Replace part of the receiver battery

High fidelity sound quality

· Ø 3.5 mm stereo, 150 Ω×2 Headphone frequency response: not inferior to 20Hz~20kHz

Comply with GB 50524-2010 "Engineering Technical Specification for Infrared Simultaneous Interpretation System" Not interfered by high-frequency driving light source You can assign a language name to each audio channel The number of channels is automatically synchronized with the actual number of channels used in the system The input sensitivity can be adjusted separately for each audio input No less than 4 transliteration output channels With fire alarm linkage trigger interface .Has LCD display and setting menu With web control function Translation units can be connected directly Wired conference system can be connected Technical parameters:

Frequency response: not inferior to 20 Hz ~ 10 kHz (-3 dB) standard sound quality, 20 Hz ~ 20 kHz (-3 dB) high sound quality;

Total harmonic distortion: ≤0.05% Weighted signal-to-noise ratio: ≥85 dBA

Comply with GB 50524-2010 "Engineering Technical Specification for Infrared Simultaneous Interpretation System" It has the function of synchronous power on and off with the host With automatic gain control function With temperature control function With manual half-power toggle switch With cable transmission delay compensation function

Comply with GB 50524-2010 "Engineering Technical Specification for Infrared Simultaneous Interpretation System" Compatible with other IR simultaneous interpretation systems in accordance with IEC61603-7 It adopts digital infrared processing chip and DQPSK digital modulation/demodulation technology Not interfered by high-frequency driving light source Push-button channel selection, can receive no less than 4 audio channels With LCD display, the channel number can be displayed. Language name. Battery level and signal status Automatic synchronization of the number of channels with the actual number of channels used in the system .Volume can be adjusted freely It has a receiving angle of not less than 270° Can work normally in the sun environment Has a test mode When the headphones are disconnected, automatically cut off the power

·1500mAh,3.7V

Voltage AC100~240V 50/60Hz;

Power 200W;

612×0.5W high-power SMD lamp beads;

50,000 hours lamp bead service life;

ARM7 processor, ±3% chip constant current accuracy;

PWM digital dimming system, DMX512/manual control mode, brightness 0~100% linear adjustable;

Intelligent temperature detection function, can monitor the temperature of the light source substrate in real time, software control the temperature of the light source within the safe use range, real-time protection of the light source;

LCD display, real-time display temperature function;

Optical characteristics:

Light source luminous flux: 16000 lm;

Color temperature 3200K~5600K linear adjustable;

Color rendering index Ra>95;

Professionally customized optical diffuser plate, uniform luminescence, high brightness, good soft light effect Beam angle: 50°;

Mechanical properties:

Strong and high-quality aluminum profile, light and thin in size;

Integrated radiator, convection cooling mode, no noise;

Optional accessories: blackout, grille;

Hanging method: pole control boom / manual boom (optional) Adopt international standard wiring device;

Net weight: 9kg;

Protection class IP20;

Working environment temperature -10°C ~ +40°C PHIDA PD-LED200PW 6 1. Add some Beam Light on the basis of Scheme A 1, only replace the dimmer table

2. Basically keep the original lights and reduce the profile lights.

A-7-2 LED Spotlight Rated voltage AC100V-240V Frequency 50Hz/60Hz Rated power 200W The total luminous flux of the light source is 13000lm Color temperature 3000K/5700K optional Beam angle 12°~50° adjustable Light source COB lamp beads Control mode DMX512 Degree of protection IP20 Lamp life Approx. 50,000 hours (junction temperature≤ 70°C) Operating environment -10°C~+40°C

Light source: 100W laser LED hybrid light source Color temperature: 7300K Light source life: 20000 hours Color rendering index: ≥70 Illuminance: 307200lux@5m scan Horizontal scanning: 540° or 630° (16-bit precision scanning) Vertical scanning: 270° (16-bit precision scanning) Reset function with automatic error correction Color system 1 color chip disc: 17 color chips + white light, half-color effect, color chip can be positioned arbitrarily, with two-way rotation rainbow effect Pattern system 1 fixed gobo plate: 27 fixed gobo + white circle with pattern dithering function effect Beam angle: 1.5° 2 prisms: 8 prisms and 12 prisms, can be rotated in the forward and reverse directions, and have a prism positioning function, 16 macro functions Optional atomization system Dimming: 0-100% linear dimming

2 USB ports 20 custom macro function execution keys, support virtual macro function, unlimited number 10 page-turning replay actuators It has a Chinese operation menu, and you can choose from no less than 7 operation menu languages Support CITP protocol video material preview;

Support graffiti-style naming method, more intuitive and convenient display The LED matrix can be controlled via the effects editor or the video function The keys have LED function indicators and mute buttons Supports SMPTE (LTC)/MIDI Built-in visualization software in the console

Support DMX1990, DMX512-A, RDM lighting control signal protocol.

The allocator itself is an RDM responder Each input and output is a standard 5-pin XLR XLR card holder (optional 3-pole XLR or EtherCon network cannon).

Fully isolated, signal input and output loops, the isolation voltage between each output loop is 2500V

AC 220V output

Video input: SDI with audio Video output: SDI with audio,HDMI,Display,DVI NewTek TriCaster TC1 1 1. Be consistent with Plan A

2. Upgrade camera products

3. Add blue background curtain 1. Be consistent with Plan A

2. Upgrade camera products

3. Add blue background curtain A-8-2 Keyboards Preset call The panel button directly calls the preset of the switcher of the video graphics production system Macro commands Macro mode and numeric keypad support connecting and activating user-configured macros Media Playback 1 media player control keyboard with player authorization and command buttons M/E Operation The control keypad can directly access and operate the M/E hybrid effect channel of the video switcher Fader 1 fader supports real-time signal preview switching, mixed channel switching, key signal switching, layer overlay, etc Joystick One stick supports mixing effects, key signal scaling, position adjustment, image cropping, camera control PTZ, virtual camera control Interface USB interface

Turn any space into a realistic studio environment.

Video output 1 x HDMI Audio input 3.5mm line volume; Embedded HDMI Audio output 3.5mm line volume; Embedded HDMI Audio channels: 4 Encode; 2 Decode Encode/decode NDI® Network 1 x RJ-45 port Gigabit Ethernet Tally supports Tally through NDI® Interface Configured and monitored with a web-based user interface Video formats: 1080p: 60, 59.94, 50, 29.97, 25; 1080i: 59.94, 50; 720p: 60, 59.94, 50, 29.97, 25 Power supply Power over Ethernet or external power adapter, 5V~18V DC power supply

Panel size: 27 inches Screen ratio: 16:9 Resolution: 3840x2160 Pitch (mm): 0. 1554 mmx 0. 1554mm 色深：10bit (8bit+A-FRC) Color gamut: sRGB 99% (Typ.)

Brightness: 350cd/㎡, 280cd/㎡ (min) Response time: 5ms (GtG) FreeSync: Yes

HDR：HDR 400

Interface: HDMIx2, audio output DisplayPort x1 Wall mounting size (mm): 100mmx100mm Features: screen control; Dual display control Viewing angle: 178/178 (CR≥10)

Effective pixels 17:9 4096 (H) x 2160 (V) 16:9 3840 (H) x 2160 (V) Built-in optical filter transparent, 1/4ND, 1/16ND, 1/64ND Sensitivity (2000 lx, 89.9% reflectance) Video Gamma: T14 (3840 x 2160/23.98P mode 3200K) ISO sensitivity ISO 2000 (S-Log3 Gamma D55 light source) Minimum illumination 0.7 lx (+18dB, 23.98P, shutter closed, ND transparent, F1.4) SNR: 57 dB (Y) (typical) Shutter speed: 1/3 sec. to 1/9,000 sec Slow and fast motion function XAVC-I mode 3840x2160: 1 to 60 frames (59.94P, 50P, 29.97P, 23.98P, 25P) XAVC-I mode 1920x1080: 1 to 180 fps (59.94P, 29.97P, 23.98P) 1 to 150 fps (50P, 25P) XAVC-L mode 3840x2160:1 - 60 frame (59.94P,50P,29.97P,23.98P,25P) XAVC-L mode 1920x1080: 1 - 120 frame (59.94P、50P、29.97P、23.98P、25P) White balance presets, memory A, memory B (1500K-50000K)/Auto tracking white balance Gain -3, 0, 3, 6, 9, 12, 18 dB, AGC

1 GB Onboard RAM 1 M Non-Volatile Memory 8 GB SDHC FLASH Memory 1 RU Rack Space 2 AXLink Interfaces 1 10/100 LAN Interface 4 10/100 ISCLan interfaces with PoE 4 PoE Interfaces 8 Digital I/O Ports 2 RS-232/422/485 Ports 6 RS-232-Only Ports 8 IR/Serial Output Ports 8 Relay Ports AMX NX-4200 1 1. Be consistent with Plan A 1、AMX Controller Use the original model：NX-3200

2、APC UPS Use the original model：

3、Replace the original Touchpanel ，or Keep using the old model:AMX MVP-9000i A-9-2 10' Touch Panel(Landscape Wall Mount and Power supply) Dimensions (HWD) Landscape: 6.8” x 10” x 2.36” (173mm x 255mm x 60mm) Weight 2.55 lbs (1.16 Kg) Power Consumption Full-On: 12.95 W maximum Standby: 5.8 W Shutdown 1 W Start-Up Inrush Current Not applicable due to PoE standard External Power Supply Required AMX recommends using one of these AMX ap_x0002_proved PoE power supplies (not included):

• PS-POE-AF-TC, PoE Injector, 802.3AF Compliant

(FG423-83)

• NXA-ENET8-POE+, Gigabit PoE Ethernet Switch

Support cascade sequence control of multiple devices (up to 256 units), cascade automatic detection and setting.

Each device comes with ID setting and detection, which can realize remote centralized control.

8 groups of device switch scene data saving/calling, scene management application is simple and convenient.

Undervoltage, overvoltage, overcurrent detection and alarm

Coverage (nominal 6 dB): H 120° Coverage (nominal 6 dB) V 40° Frequency range (-10dB): 37 Hz-20K Hz Frequency response (-3 dB): 43 Hz - 20 kHz High frequency power handling: 500 watts Low frequency power: 500 watts Maximum SPL/1M (CALC): 127dB Power consumption 100~240 VAC, 50~60 Hz, 1.5~0.6A

Dual-core PreSonus FLEX DSP for powerful processing power 7" touchscreen, 40 input channels, 26 mixing busbars, 17 electric tactile actuators Physical interface: 16 microphone inputs, 3 stereo inputs, 1 Talkback talkback input; 1 set of main outputs, 1 L+R mono output, 10 MIX outputs, 1 AES/EBU digital output 286 synchronous processors providing effects and Fat Channel processing for each input and output channel 4 effect engines and dedicated bus for effects, loading analog reverb and delay 24 DCAs; User layer; Flexible signal routing 1 administrator, 10 users can set different control permissions;

34x34 channel SD card recording; 64x64 USB recording interface; 64x64 AVB network interface DAW control: MCU and HUI protocol control Studio One, Logic, ProTools audio workstations; Complimentary digital audio workstation and control software

AES256-bit encryption technology is used in applications where secure transmission is required Patented gain correction technology optimizes the system's dynamic range including all input sources, eliminating the need to adjust transmitter gain Greater than 120dB dynamic range Transmit power available in 1, 10 and 20 mW (region-dependent) 5-segment battery level display External transmitter charging (using SBC200 dual-unit charger) 2 AA batteries for 11 hours of continuous use Backlit LCD screen for easy navigation and control 100 m (300 ft) working range

Each channel has independent gain control, LED meters, and XLR outputs Up to 72 MHz tuning range (depending on region) Digital pre-switch diversity High-density mode enables ULX-D systems to optimize the ability to use more compatible channels, with operating distances of up to 30 meters in high-density mode An RF cascade port assigns an RF signal to another device Optimized scanning technology enables automatic finding, sorting and assignment of the clearest available frequencies, and synchronization with the transmitter via IR functionality.

Bodypack frequency diversity ensures uninterrupted audio signal transmission in mission-critical applications AES 256-bit encryption can be enabled to ensure secure signal transmission Audio coalescing routes two or more audio channels to multiple receiver output combinations. Use the gain adjustment of each channel to achieve the desired audio mix.

The DANTE™ Digital Audio Transport Network feature enables audio networking over Ethernet Ethernet networking simplifies frequency coordination and deployment across multiple receivers Both the receiver and unit provide interference detection and alerting Up to 60 dB per channel with independently adjustable gain Wireless Workbench ® 6 software integration enables advanced frequency coordination planning and monitoring capabilities Compatible with AMX/Crestron control Compatible with AXT600 Axient™ Spectrum Manager Intuitive front panel LCD menu and control lock function Upgraded LCD display with adjustable contrast and brightness Audio and RF LED level meters with peak indicators Switchable mic/line level outputs